Method development for the simultaneous determination of carboxylic acids, phenolic compounds, and sorbic acid in white wines

A reversed phase liquid chromatographic method was developed for the simultaneous determination of carboxylic acids and phenolics in white wines. The samples, diluted, were injected onto a Spherisorb ODS-2 column with a gradient of sulfuric acid (pH 2.5)/methanol as mobile phase. A diode array detector was used which was set at 210nm for carboxylic acids and altered to 278nm, during the run, far phenolics and sorbic acid. The identification of compounds was based on retention time, co-chromatography and UV spectrum. Some clean-up methods (sep-pak C-18 and an ion exchange column) mere tested and did not improve the results.The analysis was simple, with no sample preparation. Application of this method was illustrated by analyses of Brazilian Welchriesling wines.

DETERMINATION of SILICON IN LUBRICANT OIL BY HIGH-RESOLUTION CONTINUUM SOURCE FLAME ATOMIC ABSORPTION SPECTROMETRY USING LEAST-SQUARE BACKGROUND CORRECTION and INTERNAL STANDARDIZATION

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Organic acid profile of commercial sour cassava starch

A presença de ácidos orgânicos no polvilho azedo, além de contribuir com aspectos como sabor e aroma, tem, conforme a literatura indica, correlação com a propriedade de expansão, que é um fator determinante no uso alimentício. Amostras de polvilho azedo foram coletadas nas Regiões Sul e Sudeste diretamente nas empresas ou no comércio. Foram preparadas para análise em cromatografia líquida de alta eficiência (CLAE), sendo que o cromatógrafo estava equipado com coluna Biorad Aminex HPX-87H para análise de ácidos orgânicos e detector refratométrico. As condições de análise envolveram o emprego da fase móvel ácido sulfúrico 0,005M, fluxo de 0,6 ml/min e temperatura da coluna de 60oC. Os ácidos quantificados foram lático (0,036 a 0,813 g/100g), acético (0 a 0,068 g/100g), propiônico (0 a 0,013 g/100g) e butírico (0 a 0,057 g/100g), presentes na fermentação natural. Os resultados revelaram grande variação entre as amostras, com diferenças mesmo dentro das Regiões. Algumas amostras apresentaram quantidades elevadas de ácidos, especialmente do ácido lático, mas nestas amostras os ácidos propiônico e butírico não foram detectados. A ausência do ácido butírico não era esperada, uma vez que esse ácido está diretamente relacionado com o aroma característico do polvilho azedo. O fato pode sugerir que a obtenção de algumas das amostras estudadas pode ter ocorrido sem o processo fermentativo natural.

Effects of corn meal and sulphuric acid on the production of cachaça

Avaliou-se o efeito da adição do fubá de milho no mosto de xarope de cana e o tratamento ácido do pé-de-cuba sobre a microbiota do processo fermentativo, acidez do vinho, grau alcoólico, rendimento e composição da cachaça. O delineamento experimental utilizado foi o de blocos casualizados, no esquema fatorial 2x3 e cinco repetições. A metodologia empregada e as análises foram as recomendadas pelo setor aguardenteiro. Os resultados permitiram concluir que a adição do ácido sulfúrico no pé-de-cuba transferiu a acidez para o vinho, não influenciando na viabilidade das leveduras, rendimento e composição da cachaça. Por outro lado, a acidificação do meio controlou as bactérias láticas no pé-de-cuba. A adição do fubá aumentou a concentração de bactérias lácticas ao final do processo fermentativo e dos álcoois homólogos superiores na cachaça, particularmente, os álcoois propílico e isobutílico.

Phosphite determination in fertilizers after online sequential sample preparation in a flow injection system

A flow injection spectrophotometric system is proposed for phosphite determination in fertilizers by the molybdenum blue method after the processing of each sample two times on-line without and with an oxidizing step. The flow system was designed to add sulfuric acid or permanganate solutions alternately into the system by simply displacing the injector-commutator from one resting position to another, allowing the determination of phosphate and total phosphate, respectively. The concentration of phosphite is obtained then by difference between the two measurents. The influence of flow rates, sample volume, and dimension of flow line connecting the injector-commutator to the main analytical channel was evaluated. The proposed method was applied to phosphite determination in commercial liquid fertilizers. Results obtained with the proposed FIA system were not statistically different from those obtained by titrimetry at the 95% confidence level. In addition, recoveries within 94 and 100% of spiked fertilizers were found. The relative standard deviation (n = 12) related to the phosphite-converted-phosphate peak alone was <= 3.5% for 800 mg L-1 P (phoshite) solution. Precision due to the differences of total phosphate and phosphate was 1.1% for 10 mg L-1 P (phosphate) + 3000 mg L-1 P (phosphite) solution. The sampling rate was calculated as 15 determinations per hour, and the reagent consumption was about 6.3 mg of KMnO4, 200 mg of (NH4)(6)Mo7O24 center dot 4H(2)O, and 40 mg of ascorbic acid per measurement.

Spectrophotometric determination of formaldehyde with chromotropic acid in phosphoric acid medium assisted by microwave oven

In the present study. a spectrophotometric method for the determination of formaldehyde by using chromotropic acid was devised. in which the use of potentially hazardous and corrosive concentrated sulfuric acid was eliminated and advantageously C replaced by a mixture of H, concentrated H3PO4 and H2O2. The reaction between formaldehyde and chromotropic acid (CA) in a cone phosphoric acid medium was accelerate by irradiating the mixture with microwave energy for 35 s (1100 W), producing a violetred compound (lambda(max)=570 nm). Beer's Law is obeyed in a concentration range of 0.8-4.8 mg 1(-1) of formaldehyde with a good correlation coefficient (r = 0.9968). The proposed method was applied in the analysis of formaldehyde in commercial disinfectants. Recoveries were within 98.0-100.4%, with standard deviations ranging from 0.03 to 0.13%. (C) 2003 Elsevier B.V All rights reserved.

Acid and fermented silage characterization and determination of apparent digestibility coefficient of crude protein for pacu Piaractus mesopotamicus

Three types of raw materials including commercial waste from saltwater (SW), freshwater fish (FW) and tilapia fillet residue (FR) were used to produce fish silage by either acid digestion (2% formic acid and 2% sulfuric acid) or anaerobic fermentation (5% of Lactobacillus plantarum and 15% sugar cane molasses). Six test diets were used in digestibility trials prepared with 70% reference diet and 30% of each experimental silage. These diets were fed to juvenile pacu Piaractus mesopotamicus (146 g average weight) in triplicate. Fish were kept in 500-L tanks and feces collected by manual extrusion. It was observed for both processes that SW waste always had the highest moisture content and lowest fat and ash. Highest crude protein levels were found in silages from commercial fish waste (SW and FW) made from whole fish unfit for human consumption. However, apparent digestibility coefficients did not vary among diets (P > 0.05). Although values did not differ statistically, fermented silage consistently displayed higher digestibility coefficients compared to acid silage. The silages exhibited relatively high protein digestibility (72.5-80.0%), thus suggesting the feasibility of using fish industry by-products in aquaculture feeds.

Methanol oxidation on PtRu/C electrocatalysts prepared by a microemulsion method

PtRu/C nanocatalysts were prepared by a microemulsion method using different values of water/surfactant molar ratio in order to get different particle sizes. Crystallite sizes and structural properties were determined by X-ray diffraction. Particle size and distribution were characterized by transmission electron microscopy and average composition was determined by energy dispersive X-ray analysis. Differential scanning calorimetry measurements indicated the presence of oxides in the as-prepared catalysts. The general electrochemical behavior was evaluated by cyclic voltammetry in 0.5 M sulfuric acid and the electrocatalytic activity towards the oxidation of methanol was studied in 0.5 M methanol acid solutions by potential sweeps and chronoamperometry. copyright The Electrochemical Society.

Effects of heat treatments on the electrocatalytic activity of Pt-Ru/C for methanol oxidation

The Pt-Ru/C materials of this study were prepared by a microemulsion method with fixed water to surfactant molar ratio and heat treated at low temperatures, to avoid changes in the average particle size, in different atmospheres. All samples were characterized by X-ray diffraction (XRD) and the mean crystallite size was estimated by using Scherrer's equation. Catalysts morphology was characterized by transmission electron microscopy (TEM). Average composition was obtained by energydispersive X-ray analysis (EDX). The general electrochemical behavior was evaluated by cyclic voltammetry in 0.5 M sulfuric acid and the electrocatalytic activity towards the oxidation of methanol was studied in 0.5 M methanol acid solutions by potential sweeps and chronoamperometry. Oxidation of adsorbed CO was used to estimate the electrochemical active area and to infer the surface properties. ©The Electrochemical Society.

Characterization and in vitro cytocompatibility of an acid-etched titanium surface

The aims of this study were to characterize the microstructure of a commercially pure titanium (cpTi) surface etched with HCl/H 2SO 4 (AE-cpTi) and to investigate its in vitro cytocompatibility compared to turned cpTi (T-cpTi). T-cpTi showed a grooved surface and AE-cpTi revealed a surface characterized by the presence of micropits. Surface parameters indicated that the AE-cpTi surface is more isotropic and present a greater area compared to T-cpTi. The oxide film thickness was similar between both surfaces; however, AE-cpTi presented more Ti and O and less C. Osteoblastic cell proliferation, alkaline phosphatase activity, and bone-like nodule formation were greater on T-cpTi than on AE-cpTi. These results show that acid etching treatment produced a surface with different topographical and chemical features compared to the turned one, and such surface modification affected negatively the in vitro cytocompatibility of cpTi as demonstrated by decreasing culture growth and expression of osteoblastic phenotype.

Influence of ethanol, acidity and chloride concentration on the corrosion resistance of AISI 316L stainless steel

The influence of ethanol, sulfuric acid and chloride on the corrosion resistance of 316L stainless steel was investigated by means of polarization curves and electrochemical impedance spectroscopy measurements. Over the studied range, the steel corrosion potential was independent of H2SO 4 and NaCl concentrations in aqueous solution. On the other hand, in solution containing 65 wt.% ethanol and 35 wt.% water, the corrosion potentials were higher than those obtained in aqueous solution. Besides, the steel corrosion potential was affected by the addition of H2SO4 and NaCl in solution. In solutions with and without ethanol, plus 0.35 wt.% NaCl, the presence of 1 wt.% H2SO4 inhibited the appearance of pitting corrosion. © 2013 Sociedade Brasileira de Química.

Crescimento de fibras de zircônia preparadas pela rota sol-gel a partir de moldes de cristal líquido

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comportamento eletroquímico do crômio em soluções contendo íons cloreto

Pós-graduação em Química - IQ

Estudo eletroquímico de ligas metálicas alumínio-silício em meio ácido

As ligas a base de alumínio-silício apresentam baixo peso específico, boa resistência mecânica e resistência à corrosão, têm sido amplamente utilizadas como substitutas de algumas ligas ferrosas na fabricação de peças em diversos segmentos industriais. Nesta pesquisa estudou-se o comportamento eletroquímico do alumínio e suas ligas alumínio-silício 0,3 e 0,7% em massa, em elétrólitos de ácido sulfúrico e ácido clorídrico, ambos a 0,1 mol/L. Os resultados das técnicas eletroquímicas mostraram que o Si provocou um deslocamento para valores mais positivos do potencial de corrosão, observou-se uma região de passividade nas curvas anódicas dos eletrodos em ácido sulfúrico, este fenômeno de passivação não ocorreu em ácido clorídrico. Os diagramas de Nyquist apresentaram dois arcos,um capacitivo na região de altas frequências, relacionado à formação da camada óxida e, um indutivo em baixas frequências, atribuído a adsorção de ânions na superfície metálica, as semelhanças nos diagramas mostram que os fenômenos eletroquímicos são idênticos e independentes da adição de Si. Os diagramas de impedância, também, mostraram menor resistência de polarização das ligas Al-Si. Considerando, apenas, os estudos eletroquímicos pode-se afirmar que os eletrodos não apresentaram diferenças relevantes entre si e a suscetibilidade a corrosão nestas soluções ácidas não implica em uma característica desfavorável a sua aplicação.

Adsorção de molibdato em minerais de argilas naturais e modificadas com ácido sulfúrico, ácido húmico e uréia

Sedimentos argilosos provenientes do município Assis Brasil, Acre, foram lixiviados com soluções de ácido sulfúrico, ácido húmico e uréia, visando avaliar a capacidade de retenção de molibdato nesses materiais e investigar a viabilidade do processo de adsorção na interface sólido-solução. Os materiais foram caracterizados a partir de dados de difração de raios X, espectros FTIR, cargas superficiais e composição química. Os modelos de isotermas de Langmuir, Freundlich e Sips foram usados no ajuste dos dados experimentais de adsorção. Os minerais identificados nos sedimentos argilosos foram esmectita, caulinita, ilita, quartzo, albita, microclineo e calcita. A modificação química promoveu a amorfização da amostra modificada com ácido sulfúrico e delaminação ao longo do plano 001 da amostra modificada com uréia. Os ajustes matemáticos definidos pelos parâmetros (K_L,K_f) das isotermas de adsorção, avaliação de C_e vs. Q_e, pH vs. Q_e ,Qmáx (sips) e Kd indicaram que a amostra S10H15 é a mais eficiente na adsorção de MoO₄^2-, com q_Max = 6,83 mg.L^-1.