Gender ingroup projection and the evaluative connotation of leader prototypes

The underrepresentation of women in top corporate ranks is a topic of ongoing discussion. Manager prototypes are proposed to be more male-typed than female-typed because historically men more often than women have held leadership roles. Why then is the maleness of manager prototypes even more pronounced among men than among women? Given that most personnel decision makers in organizations are men this phenomenon is problematic for women's advancement to top management positions. We address this question by investigating peoples' use of ingroup projection and their endorsement of evaluative attributes in constructing gender and leader prototypes.

Future development of gastrointestinal cancer incidence and mortality rates in Switzerland: a tumour registry- and population-based projection up to 2030.

QUESTIONS UNDER STUDY: Since tumour burden consumes substantial healthcare resources, precise cancer incidence estimations are pivotal to define future needs of national healthcare. This study aimed to estimate incidence and mortality rates of oesophageal, gastric, pancreatic, hepatic and colorectal cancers up to 2030 in Switzerland. METHODS: Swiss Statistics provides national incidences and mortality rates of various cancers, and models of future developments of the Swiss population. Cancer incidences and mortality rates from 1985 to 2009 were analysed to estimate trends and to predict incidence and mortality rates up to 2029. Linear regressions and Joinpoint analyses were performed to estimate the future trends of incidences and mortality rates. RESULTS: Crude incidences of oesophageal, pancreas, liver and colorectal cancers have steadily increased since 1985, and will continue to increase. Gastric cancer incidence and mortality rates reveal an ongoing decrease. Pancreatic and liver cancer crude mortality rates will keep increasing, whereas colorectal cancer mortality on the contrary will fall. Mortality from oesophageal cancer will plateau or minimally increase. If we consider European population-standardised incidence rates, oesophageal, pancreatic and colorectal cancer incidences are steady. Gastric cancers are diminishing and liver cancers will follow an increasing trend. Standardised mortality rates show a diminution for all but liver cancer. CONCLUSIONS: The oncological burden of gastrointestinal cancer will significantly increase in Switzerland during the next two decades. The crude mortality rates globally show an ongoing increase except for gastric and colorectal cancers. Enlarged healthcare resources to take care of these complex patient groups properly will be needed.

A low-cost ultrasonic spray dryer to produce spherical microparticles from polymeric matrices

The spray-drying technique has been widely used for drying heat-sensitive foods, pharmaceuticals, and other substances, because it leads to rapid solvent evaporation from droplets. This method involves the transformation of a feed from a fluid state into a dried particulate, by spraying the feed into a hot medium. Despite being most often considered a dehydration process, spray drying can also be used as an encapsulation method. Therefore, this work proposes the use of a simple and low-cost ultrasonic spray dryer system to produce spherical microparticles. This equipment was successfully applied to the preparation of dextrin microspheres on a laboratory scale and for academic purposes.

Neutron tomography using projection data obtained by Monte Carlo simulation for nondestructive evaluation

This work present the application of a computer package for generating of projection data for neutron computerized tomography, and in second part, discusses an application of neutron tomography, using the projection data obtained by Monte Carlo technique, for the detection and localization of light materials such as those containing hydrogen, concealed by heavy materials such as iron and lead. For tomographic reconstructions of the samples simulated use was made of only six equal projection angles distributed between 0º and 180º, with reconstruction making use of an algorithm (ARIEM), based on the principle of maximum entropy. With the neutron tomography it was possible to detect and locate polyethylene and water hidden by lead and iron (with 1cm-thick). Thus, it is demonstrated that thermal neutrons tomography is a viable test method which can provide important interior information about test components, so, extremely useful in routine industrial applications.

Carte de l'ancien et du nouveau monde, suivant une projection nouvelle

Nimeketiedot nimiönkehyksissä

Dynamic Analysis Model of Spherical Roller Bearings with Defects

Rolling element bearings are essential components of rotating machinery. The spherical roller bearing (SRB) is one variant seeing increasing use, because it is self-aligning and can support high loads. It is becoming increasingly important to understand how the SRB responds dynamically under a variety of conditions. This doctoral dissertation introduces a computationally efficient, three-degree-of-freedom, SRB model that was developed to predict the transient dynamic behaviors of a rotor-SRB system. In the model, bearing forces and deflections were calculated as a function of contact deformation and bearing geometry parameters according to nonlinear Hertzian contact theory. The results reveal how some of the more important parameters; such as diametral clearance, the number of rollers, and osculation number; influence ultimate bearing performance. Distributed defects, such as the waviness of the inner and outer ring, and localized defects, such as inner and outer ring defects, are taken into consideration in the proposed model. Simulation results were verified with results obtained by applying the formula for the spherical roller bearing radial deflection and the commercial bearing analysis software. Following model verification, a numerical simulation was carried out successfully for a full rotor-bearing system to demonstrate the application of this newly developed SRB model in a typical real world analysis. Accuracy of the model was verified by comparing measured to predicted behaviors for equivalent systems.

Allgemeine Welt-Karte in Mercator's Projection zur Übersicht der Deutschen Consulate : Deutscher Seeverkehrs-Linien und des Welt-Postvereins

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Perceptions of intergroup bias : the roles of social projection and meta-stereotypes

Underlying intergroup perceptions include processes of social projection (perceiving personal traitslbeliefs in others, see Krueger 1998) and meta-stereotyping (thinking about other groups' perceptions of one's own group, see Vorauer et aI., 1998). Two studies were conducted to investigate social projection and meta-stereotypes in the domain of White-Black racial relations. Study 1, a correlational study, examined the social projection of prejudice and 'prejudiced' meta-stereotypes among Whites. Results revealed that (a) Whites socially projected their intergroup attitudes onto other Whites (and Blacks) [i.e., Whites higher in prejudice against Blacks believed a large percentage of Whites (Blacks) are prejudiced against Blacks (Whites), whereas Whites low in prejudice believed a smaller percentage of Whites (Blacks) are prejudiced]; (b) Whites held the meta:..stereotype that their group (Whites) is viewed by Blacks to be prejudiced; and (c) prejudiced meta-stereotypes may be formed through the social projection of intergroup attitudes (result of path-model tests). Further, several correlates of social projection and meta-stereotypes were identified, including the finding that feeling negatively stereotyped by an outgroup predicted outgroup avoidance through heightened intergroup anxiety. Study 2 replicated and extended these findings, investigating the social projection of ingroup favouritism and meta- and other-stereotypes about ingroup favouritism. These processes were examined experimentally using an anticipated intergroup contact paradigm. The goal was to understand the experimental conditions under which people would display the strongest social projection of intergroup attitudes, and when experimentally induced meta-stereotypes (vs. other-stereotypes; beliefs about the group 11 preferences of one's outgroup) would be most damaging to intergroup contact. White participants were randomly assigned to one of six conditions and received (alleged) feedback from a previously completed computer-based test. Depending on condition, this information suggested that: (a) the participant favoured Whites over Blacks; (b) previous White participants favoured Whites over Blacks; (c) the participant's Black partner favoured Blacks over Whites; (d) previous Black participants favoured Blacks over Whites; (e) the participant's Black partner viewed the participant to favour Whites over Blacks; or (£) Black participants previously participating viewed Whites to favour Whites over Blacks. In a defensive reaction, Whites exhibited enhanced social projection of personal intergroup attitudes onto their ingroup under experimental manipulations characterized by self-concept threat (i.e., when the computer revealed that the participant favoured the ingroup or was viewed to favour the ingroup). Manipulated meta- and otherstereotype information that introduced intergroup contact threat, on the other hand, each exerted a strong negative impact on intergroup contact expectations (e.g., anxiety). Personal meta-stereotype manipulations (i.e., when the participant was informed that her/ his partner thinks s/he favours the ingroup) exerted an especially negative impact on intergroup behaviour, evidenced by increased avoidance of the upcoming interracial interaction. In contrast, personal self-stereotype manipulations (i.e., computer revealed that one favoured the ingroup) ironically improved upcoming intergroup contact expectations and intentions, likely due to an attempt to reduce the discomfort of holding negative intergroup attitudes. Implications and directions for future research are considered.

Projection-Based Statistical Inference in Linear Structural Models with Possibly Weak Instruments

It is well known that standard asymptotic theory is not valid or is extremely unreliable in models with identification problems or weak instruments [Dufour (1997, Econometrica), Staiger and Stock (1997, Econometrica), Wang and Zivot (1998, Econometrica), Stock and Wright (2000, Econometrica), Dufour and Jasiak (2001, International Economic Review)]. One possible way out consists here in using a variant of the Anderson-Rubin (1949, Ann. Math. Stat.) procedure. The latter, however, allows one to build exact tests and confidence sets only for the full vector of the coefficients of the endogenous explanatory variables in a structural equation, which in general does not allow for individual coefficients. This problem may in principle be overcome by using projection techniques [Dufour (1997, Econometrica), Dufour and Jasiak (2001, International Economic Review)]. AR-types are emphasized because they are robust to both weak instruments and instrument exclusion. However, these techniques can be implemented only by using costly numerical techniques. In this paper, we provide a complete analytic solution to the problem of building projection-based confidence sets from Anderson-Rubin-type confidence sets. The latter involves the geometric properties of “quadrics” and can be viewed as an extension of usual confidence intervals and ellipsoids. Only least squares techniques are required for building the confidence intervals. We also study by simulation how “conservative” projection-based confidence sets are. Finally, we illustrate the methods proposed by applying them to three different examples: the relationship between trade and growth in a cross-section of countries, returns to education, and a study of production functions in the U.S. economy.

Projection de la mortalité aux âges avancées au Canada : comparaison de trois modèles

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Reconstruction tridimensionnelle pour projection sur surfaces arbitraires.

Ce mémoire s'inscrit dans le domaine de la vision par ordinateur. Elle s'intéresse à la calibration de systèmes de caméras stéréoscopiques, à la mise en correspondance caméra-projecteur, à la reconstruction 3D, à l'alignement photométrique de projecteurs, au maillage de nuages de points, ainsi qu'au paramétrage de surfaces. Réalisé dans le cadre du projet LightTwist du laboratoire Vision3D, elle vise à permettre la projection sur grandes surfaces arbitraires à l'aide de plusieurs projecteurs. Ce genre de projection est souvent utilisé en arts technologiques, en théâtre et en projection architecturale. Dans ce mémoire, on procède au calibrage des caméras, suivi d'une reconstruction 3D par morceaux basée sur une méthode active de mise en correspondance, la lumière non structurée. Après un alignement et un maillage automatisés, on dispose d'un modèle 3D complet de la surface de projection. Ce mémoire introduit ensuite une nouvelle approche pour le paramétrage de modèles 3D basée sur le calcul efficace de distances géodésiques sur des maillages. L'usager n'a qu'à délimiter manuellement le contour de la zone de projection sur le modèle. Le paramétrage final est calculé en utilisant les distances obtenues pour chaque point du modèle. Jusqu'à maintenant, les méthodes existante ne permettaient pas de paramétrer des modèles ayant plus d'un million de points.

Projection multilingue d'annotations pour dialogues avancés

Depuis quelques années, les applications intégrant un module de dialogues avancés sont en plein essor. En revanche, le processus d’universalisation de ces systèmes est rapidement décourageant : ceux-ci étant naturellement dépendants de la langue pour laquelle ils ont été conçus, chaque nouveau langage à intégrer requiert son propre temps de développement. Un constat qui ne s’améliore pas en considérant que la qualité est souvent tributaire de la taille de l’ensemble d’entraînement. Ce projet cherche donc à accélérer le processus. Il rend compte de différentes méthodes permettant de générer des versions polyglottes d’un premier système fonctionnel, à l’aide de la traduction statistique. L’information afférente aux données sources est projetée afin de générer des données cibles parentes, qui diminuent d’autant le temps de développement subséquent. En ce sens, plusieurs approches ont été expérimentées et analysées. Notamment, une méthode qui regroupe les données avant de réordonner les différents candidats de traduction permet d’obtenir de bons résultats.

Reconstruction active par projection de lumière non structurée

Cette thèse porte sur la reconstruction active de modèles 3D à l’aide d’une caméra et d’un projecteur. Les méthodes de reconstruction standards utilisent des motifs de lumière codée qui ont leurs forces et leurs faiblesses. Nous introduisons de nouveaux motifs basés sur la lumière non structurée afin de pallier aux manques des méthodes existantes. Les travaux présentés s’articulent autour de trois axes : la robustesse, la précision et finalement la comparaison des patrons de lumière non structurée aux autres méthodes. Les patrons de lumière non structurée se différencient en premier lieu par leur robustesse aux interréflexions et aux discontinuités de profondeur. Ils sont conçus de sorte à homogénéiser la quantité d’illumination indirecte causée par la projection sur des surfaces difficiles. En contrepartie, la mise en correspondance des images projetées et capturées est plus complexe qu’avec les méthodes dites structurées. Une méthode d’appariement probabiliste et efficace est proposée afin de résoudre ce problème. Un autre aspect important des reconstructions basées sur la lumière non structurée est la capacité de retrouver des correspondances sous-pixels, c’est-à-dire à un niveau de précision plus fin que le pixel. Nous présentons une méthode de génération de code de très grande longueur à partir des motifs de lumière non structurée. Ces codes ont l’avantage double de permettre l’extraction de correspondances plus précises tout en requérant l’utilisation de moins d’images. Cette contribution place notre méthode parmi les meilleures au niveau de la précision tout en garantissant une très bonne robustesse. Finalement, la dernière partie de cette thèse s’intéresse à la comparaison des méthodes existantes, en particulier sur la relation entre la quantité d’images projetées et la qualité de la reconstruction. Bien que certaines méthodes nécessitent un nombre constant d’images, d’autres, comme la nôtre, peuvent se contenter d’en utiliser moins aux dépens d’une qualité moindre. Nous proposons une méthode simple pour établir une correspondance optimale pouvant servir de référence à des fins de comparaison. Enfin, nous présentons des méthodes hybrides qui donnent de très bons résultats avec peu d’images.

AST-120 (spherical carbon adsorbent) lowers ammonia levels and attenuates brain edema in bile duct-ligated rats

The pathogenesis of hepatic encephalopathy is multifactorial, involving gut-derived toxins such as ammonia, which has been demonstrated to induce oxidative stress. Therefore, a primary hepatic encephalopathy treatment target is reducing ammonia production in the gastrointestinal tract. AST-120, an oral adsorbent of engineered activated carbon microspheres with surface areas exceeding 1600 m(2) /g, acts as a sink for neurotoxins and hepatotoxins present in the gut. We evaluated the capacity of AST-120 to adsorb ammonia in vitro and to lower blood ammonia, oxidative stress and brain edema in cirrhotic rats. Cirrhosis was induced in rats by bile duct ligation for 6 weeks. AST-120 was administered by gavage preventively for 6 weeks (0.1, 1, and 4 g/kg/day). In addition, AST-120 was evaluated as a short-term treatment for 2 weeks and 3 days (1 g/kg/day) and as a sink to adsorb intravenously infused ammonium acetate. In vitro, AST-120 efficiently adsorbed ammonia. Ammonia levels significantly decreased in a dose-dependent manner for all AST-120-treated bile duct-ligated rats (nontreated: 177.3 ± 30.8 μM; AST-120, 0.1 g/kg/day: 121.9 ± 13.8 μM; AST-120, 1 g/kg/day: 80.9 ± 30.0 μM; AST-120, 4 g/kg/day: 48.8 ± 19.6 μM) and significantly correlated with doses of AST-120 (r = -0.6603). Brain water content and locomotor activity normalized after AST-120 treatments, whereas arterial reactive oxygen species levels remained unchanged. Furthermore, AST-120 significantly attenuated a rise in arterial ammonia after ammonium acetate administration (intravenously). Conclusion:AST-120 treatment decreased arterial ammonia levels, normalized brain water content and locomotor activity but did not demonstrate an effect on systemic oxidative stress. Also, AST-120 acts as an ammonia sink, efficiently removing blood-derived ammonia. Additional studies are warranted to evaluate the effects of AST-120 on hepatic encephalopathy in patients with advanced liver disease. (HEPATOLOGY 2011;).

Density modes in spherical 4He shells

We compute the density-fluctuation spectrum of spherical 4HeN shells adsorbed on the outer surface of Cn fullerenes. The excitation spectrum is obtained within the random-phase approximation, with particle-hole elementary excitations and effective interaction extracted from a density-functional description of the shell structure. The presence of one or two solid helium layers adjacent to the adsorbing fullerene is phenomenologically accounted for. We illustrate our results for a selection of numbers of adsorbed atoms on C20, C60, and C120. The hydrodynamical model that has proven successful to describe helium excitations in the bulk and in restricted geometries permits to perform a rather exhaustive analysis of various fluid spherical systems, namely, spheres, cavities, free bubbles, and bound shells of variable size.