Balls to the wall: How acoustic information from a ball in motion guides interceptive movement in people with Parkinson’s disease

Previous research has shown that Parkinson's disease (PD) patients can increase the speed of their movement when catching a moving ball compared to when reaching for a static ball (Majsak et al., 1998). A recent model proposed by Redgrave et al. (2010) explains this phenomenon with regard to the dichotomic organization of motor loops in the basal ganglia circuitry and the role of sensory micro-circuitries in the control of goal-directed actions. According to this model, external visual information that is relevant to the required movement can induce a switch from a habitual control of movement toward an externally-paced, goal-directed form of guidance, resulting in augmented motor performance (Bienkiewicz et al., 2013). In the current study, we investigated whether continuous acoustic information generated by an object in motion can enhance motor performance in an arm reaching task in a similar way to that observed in the studies of Majsak et al. (1998, 2008). In addition, we explored whether the kinematic aspects of the movement are regulated in accordance with time to arrival information generated by the ball's motion as it reaches the catching zone. A group of 7 idiopathic PD (6 male, 1 female) patients performed a ball-catching task where the acceleration (and hence ball velocity) was manipulated by adjusting the angle of the ramp. The type of sensory information (visual and/or auditory) specifying the ball's arrival at the catching zone was also manipulated. Our results showed that patients with PD demonstrate improved motor performance when reaching for a ball in motion, compared to when stationary. We observed how PD patients can adjust their movement kinematics in accordance with the speed of a moving target, even if vision of the target is occluded and patients have to rely solely on auditory information. We demonstrate that the availability of dynamic temporal information is crucial for eliciting motor improvements in PD. Furthermore, these effects appear independent from the sensory modality through-which the information is conveyed. 

Next generation Bridge weigh-in-motion using fibre optic sensors

There have been over 3000 bridge weigh-in-motion (B-WIM) installations in 25 countries worldwide, this has led vast improvements in post processing of B-WIM systems since its introduction in the 1970’s. Existing systems are based on electrical resistance strain gauges which can be prohibitive in achieving data for long term monitoring of rural bridges due to power consumption. This paper introduces a new low-power B-WIM system using fibre optic sensors (FOS). The system consisted of a series of FOS which were attached to the soffit of an existing integral bridge with a single span of 19m. The site selection criteria and full installation process has been detailed in the paper. A method of calibration was adopted using live traffic at the bridge site and based on this calibration the accuracy of the system was determined. New methods of axle detection for B-WIM were investigated and verified in the field.

Recent developments in bridge weigh-in-motion (B-WIM).

Bridge Weigh in Motion (B-WIM) uses accurate sensing systems to transform an existing bridge into a mechanism to determine actual traffic loading. This information on traffic loading can enable efficient and economical management of transport networks and is becoming a valuable tool for bridge safety assessment. B-WIM can provide site specific traffic loading on deteriorating bridges, which can be used to determine if the reduced capacity is still sufficient to allow the structure to remain operational and minimise unnecessary replacement or rehabilitation costs and prevent disruption to traffic. There have been numerous reports on the accuracy classifications of existing B-WIM installations and some common issues have emerged. This paper details some of the recent developments in B-WIM which were aimed at overcoming these issues. A new system has been developed at Queens University Belfast using fibre optic sensors to provide accurate axle detection and improved accuracy overall. The results presented in this paper show that the fibre optic system provided much more accurate results than conventional WIM systems, as the FOS provide clearer signals at high scanning rates which require less filtering and less post processing. A major disadvantage of existing B-WIM systems is the inability to deal with more than one vehicle on the bridge at the same time; sensor strips have been proposed to overcome this issue. A bridge can be considered safe if the probability that load exceeds resistance is acceptably low, hence B-WIM information from advanced sensors can provide confidence in our ageing structures.

Assessment Of various sensors for structural health monitoring for bridge weigh-in-motion (B-WIM).

In recent years, Structural Health Monitoring (SHM) systems have been developed to monitor bridge deterioration, assess real load levels and hence extend bridge life and safety. A road bridge is only safe if the stresses caused by the passing vehicles are less than the capacity of the bridge to resist them. Conventional SHM systems can be used to improve knowledge of the bridges capacity to resist stresses but generally give no information on the causes of any increase in stresses (based on measuring strain). The concept of in Bridge Weigh-in-Motion (B-WIM) is to establish axle loads, without interruption to traffic flow, by using strain sensors at a bridge soffit and subsequently converting the data to real time axle loads or stresses. Recent studies have shown it would be most beneficial to develop a portable system which can be easily attached to existing and new bridge structures for a specified monitoring period. The sensors could then be left in place while the data acquisition can be moved for various other sites. Therefore it is necessary to find accurate sensors capable of capturing peak strains under dynamic load and suitable methods for attaching these strain sensors to existing and new bridge structures. Additionally, it is important to ensure accurate strain transfer between concrete and steel, the adhesives layer and the strain sensor. This paper describes research investigating the suitably of using various sensors for the monitoring of concrete structures under dynamic vehicle load. Electrical resistance strain (ERS) gauges, vibrating wire (VW) gauges and fibre optic sensors (FOS) are commonly used for SHM. A comparative study will be carried out to select a suitable sensor for a bridge Weigh in Motion System. This study will look at fixing methods, durability, scanning rate and accuracy range. Finite element modeling is used to predict the strains which are then validated in laboratory trials.

A Novel Approach for Axle Detection in Bridge Weigh-In-Motion Systems

Bridge weigh-in-motion (B-WIM), a system that uses strain sensors to calculate the weights of trucks passing on bridges overhead, requires accurate axle location and speed information for effective performance. The success of a B-WIM system is dependent upon the accuracy of the axle detection method. It is widely recognised that any form of axle detector on the road surface is not ideal for B-WIM applications as it can cause disruption to the traffic (Ojio & Yamada 2002; Zhao et al. 2005; Chatterjee et al. 2006). Sensors under the bridge, that is Nothing-on-Road (NOR) B-WIM, can perform axle detection via data acquisition systems which can detect a peak in strain as the axle passes. The method is often successful, although not all bridges are suitable for NOR B-WIM due to limitations of the system. Significant research has been carried out to further develop the method and the NOR algorithms, but beam-and-slab bridges with deep beams still present a challenge. With these bridges, the slabs are used for axle detection, but peaks in the slab strains are sensitive to the transverse position of wheels on the beam. This next generation B-WIM research project extends the current B-WIM algorithm to the problem of axle detection and safety, thus overcoming the existing limitations in current state-of–the-art technology. Finite Element Analysis was used to determine the critical locations for axle detecting sensors and the findings were then tested in the field. In this paper, alternative strategies for axle detection were determined using Finite Element analysis and the findings were then tested in the field. The site selected for testing was in Loughbrickland, Northern Ireland, along the A1 corridor connecting the two cities of Belfast and Dublin. The structure is on a central route through the island of Ireland and has a high traffic volume which made it an optimum location for the study. Another huge benefit of the chosen location was its close proximity to a nearby self-operated weigh station. To determine the accuracy of the proposed B-WIM system and develop a knowledge base of the traffic load on the structure, a pavement WIM system was also installed on the northbound lane on the approach to the structure. The bridge structure selected for this B-WIM research comprised of 27 pre-cast prestressed concrete Y4-beams, and a cast in-situ concrete deck. The structure, a newly constructed integral bridge, spans 19 m and has an angle of skew of 22.7°.

The sectionalism of the tariff bill. Speech of Hon. John L. McLaurin, of South Carolina, in the Senate of the United States

This document contains a speech by John L. McLaurin, representative of South Carolina. Sections of the speech include: sectionalism exposed, the bill might have been defeated, the south plundered of its rights, not a protectionist, fraudulent demands of New England, Hon. Randolph Tucker, Hon. W.R. Morrison, and Hon. R.Q. Mills strangers to the doctrine in 1882, a tariff for revenue against the doctrine of free raw material, don’t want Cleveland’s interpretation, contest of schedules, and my remedy.

Speech of Hon. John Lowndes McLaurin, of South Carolina, in the Senate of the United States, Monday, December 9, 1901

This document contains a speech by John L. McLaurin of South Carolina presented in the Senate of the United States. Sections of the speech include: sectionalism the cause, conditions in South Carolina, the federal administration in South Carolina, should not array class against class, freedom of thought and speech, the issues, under caucus dictation the Senate no longer a deliberative body, the beginning of the fight, matter of arraying class against class, freedom of thought and speech, and issues.

The tariff. Speech of Representative J. L. McLaurin, of South Carolina, in the House of Representatives, Tuesday, March 23, 1897

This document contains a speech of John L. McLaurin, representative of South Carolina, in the House of Representatives on Tuesday, March 23, 1897 about proposed tariffs.

Protection to farmers : speech of Hon. D. Wyatt Aiken, of South Carolina, in the House of Representatives, Tuesday, March 6, 1882, upon the Agricultural Appropriation Bill

This speech is about the Agricultural Appropriation Bill, which is a bill making appropriations for the Agricultural Department of the Government for the fiscal year ending in June 30,1883. Mr. Aiken is approved by the chairman to speak and he goes on to explain that he agrees with the majority of the bill with the exception of two or three clauses. He gives the reasoning behind his objections in the rest of the speech.

Speech of Hon. John Lowndes McLaurin, of South Carolina, in the Senate of the United States, Monday, December 9, 1901

This speech is to address the statement that Mr. McLaurin has been excluded from the caucuses of his party and thus that he will be without assignment on any committee. He goes on to explain his exclusion and defend his views that led to his exclusion.

Proceedings of the General Assembly of South Carolina in the matter of the impeachment of Judge William Dobein James, November-December, 1827, and January, 1828

This document contains an account of the proceedings pertaining to the impeachment of Judge William Dobein James. The document contains the arguments for and against the impeachment as well as the voting tallies.

Free coinage of silver : speech of Hon. William Elliott, of South Carolina, in the House of Representatives, Thursday, February 13, 1896 [Pamphlet]

This speech is given to the United States House of Representatives. Hon. William Elliot gives a persuasive argument for why he will be voting against the senate amendment for free coinage of silver. He defines free coinage of silver and he describes fifty-cent dollar. He discusses the fall in the price of products and provides causation.

Heroes on the home front : heroism and virtue in post-9/11 American cinema /

This thesis is intended to contribute to critical discussion of the American male hero in mainstream American war and action films post September 11, 2001 . The thesis investigates how these heroes' behaviour echoes a patriotic, conservative construction of the modern American as created through speeches given by George W. Bush in the wake of the events of September 11, 2001 . The thesis examines the hero in six primary sources: the war films We Were Soldiers, Behind Enemy Lines and The Great Raid and the action films Collateral Damage, Man on Fire and The Punisher. By analyzing the ideological subtext, political content, visual strategies and generic implications of the films, as well as the binary constructions of a selection of Bush speeches, and by reviewing historical representations of American male heroes on film produced in the wake of political events, the thesis concludes that the six films mobilize the USA's conservative viewpoint towards war and military action, and in concert with the speeches, contribute to an ongoing militarization of visual culture. Both systems echo a dangerous ideological fantasy of American history, life and patriotism.