Gerenciamento de resíduos da construção civil: análise e atualização dos estudos realizados na UNESP-FEG para o município de Guaratinguetá

The construction industry is a large consumer of natural resources and one of the largest generators of residues with significant impacts on the environment. Because of the large production of Construction Industry Residues (RCC), it is essential reliable and updated information about generation, composition and classification sources of these residues, especially for management, recycling and final disposal. RCC represent the most part of solid residues generated in a city. In this way, the management of these residues is an issue that is gaining increasing importance in the Brazilian scenario, since the legal and society requirements to internalize the sustainability in the construction process - since the extraction, use, wastage savings, reutilization until the appropriate discard has been increasing in the last years. The present work objective is updating the quantities produced and collected in Guaratinguetá-SP, based on data collected with the municipal administrative entities that act direct or indirectly in the RCC management, elaborate a detailed bibliographic review, with special attention to the graduate works that were realized in FEG about this theme. With this material, scenarios to a better adequacy of the administrative structure to managements RCC activities, as well as was suggested actions to achieve these scenarios

Development of an innovative pyrolysis plant for the production of secondary raw materials

This project was born with the aim of developing an environmentally and financially sustainable process to dispose of end-life tires. In this perspective was devised an innovative static bed batch pilot reactor where pyrolysis can be carried out on the whole tires in order to recover energy and materials and simultaneously save the energy costs of their shredding. The innovative plant is also able to guarantee a high safety of the process thanks to the presence of a hydraulic guard. The pilot plant was used to pyrolyze new and end-life tires at temperatures from 400 to 600°C with step of 50°C in presence of steam. The main objective of this research was to evaluate the influence of the maximum process temperature on yields and chemical-physics properties of pyrolysis products. In addition, in view of a scale-up of the plant in continuous mode, the influence of the nature of several different tires as well as the effects of the aging on the final products were studied. The same pilot plant was also used to carry out pyrolysis on polymeric matrix composites in order to obtain chemical feedstocks from the resin degradation together with the recovery of the reinforcement in the form of fibers. Carbon fibers reinforced composites ad fiberglass was treated in the 450-600°C range and the products was fully characterized. A second oxidative step was performed on the pyrolysis solid residue in order to obtain the fibers in a suitable condition for a subsequent re-impregnation in order to close the composite Life Cycle in a cradle-to-cradle approach. These investigations have demonstrated that steel wires, char, carbon and glass fibers recovered in the prototypal plant as solid residues can be a viable alternative to pristine materials, making use of them to obtain new products with a commercial added value.

Gestión de efluentes y consumo de agua en bodega

Se estudió la gestión de efluentes y el consumo de agua en una bodega productora de vinos tintos ubicada en Maipú (Mendoza, Argentina) y se propusieron alternativas para mejorar la situación actual organizando y reduciendo el consumo de agua y disminuyendo el impacto ambiental que causan los efluentes. La empresa no mide con precisión el consumo de agua, estimándolo por las veces que se llena y vacía la pileta que recoge los efluentes. Con ese dato, y en función del volumen elaborado de vino, se infirió que el gasto de agua quintuplica aproximadamente al de un establecimiento similar en Francia. Tampoco son medidas la salinidad y la toxicidad de las aguas residuales. Los cambios propuestos se basaron en: • la medición de los flujos de aguas de lavado y efluentes; • la reducción del consumo de agua adaptando materiales y maquinarias; estableciendo protocolos de limpieza y sensibilizando e instruyendo al personal; • la separación de los efluentes tóxicos; • la separación eficiente de los residuos sólidos de los líquidos; • los tratamientos oxidativos en aguas efluentes; • la reutilización parcial de las aguas tratadas en usos no bromatológicos.

Yield, nutrient utilization and soil properties in a melon crop amended with wine-distillery waste

In Spain, large quantities of wine are produced every year (3,339,700 tonnes in 2011) (FAO, 2011) with the consequent waste generation. During the winemaking process, solid residues like grape stalks are generated, as well as grape marc and wine lees as by-products. According to the Council Regulation (EC) 1493/1999 on the common organization of the wine market, by-products coming from the winery industry must be sent to alcohol-distilleries to generate exhausted grape marc and vinasses. With an adequate composting treatment, these wastes can be applied to soils as a source of nutrients and organic matter. A three-year field experiment (2011, 2012 and 2013) was carried out in Ciudad Real (central Spain) to study the effects of wine-distillery waste compost application in a melon crop (Cucumis melo L.). Melon crop has been traditionally cultivated in this area with high inputs of water and fertilizers, but no antecedents of application of winery wastes are known. In a randomized complete block design, four treatments were compared: three compost doses consisted of 6.7 (D1), 13.3 (D2) and 20 t compost ha-1 (D3), and a control treatment without compost addition (D0). The soil was a shallow sandy-loam (Petrocalcic Palexeralfs) with a depth of 0.60 m and a discontinuous petrocalcic horizon between 0.60 and 0.70 m, slightly basic (pH 8.4), poor in organic matter (0.24%), rich in potassium (410 ppm) and with a medium level of phosphorus (22.1 ppm). During each growing period four harvests were carried out and total and marketable yield (fruits weighting <1 kg or visually rotten were not considered), fruit average weight and fruit number per plant were determined. At the end of the crop cycle, four plants per treatment were sampled and the nutrient content (N, P and K) was determined. Soil samplings (0-30 cm depth) were carried before the application of compost and at the end of each growing season and available N and P, as well as exchangeable K content were analyzed. With this information, an integrated analysis was carried out with the aim to evaluate the suitability of this compost as organic amendment.

El comportamiento geomecánico deformacional de los residuos urbanos : aplicación a un caso real

Las características de heterogeneidad de los residuos sólidos urbanos así como la degradación biológica de sus componentes orgánicos influyen en los aspectos geotécnicos de los vertederos. La magnitud y duración de los asientos son factores muy importantes en el estudio del comportamiento de vertederos. La velocidad de asiento disminuye con el tiempo pero se mantiene durante muchos años después de su clausura. Para reducir los asientos del relleno, uno de los métodos de tratamiento que se utiliza es la compactación dinámica de los residuos sólidos. En este trabajo se estudia la mejora, a través de la compactación dinámica por impacto tipo “Menard”, de un vertedero de residuos sólidos en Madrid y los asientos provocados por la aplicación de una sobrecarga. Se analiza el comportamiento de los residuos sólidos con tratamiento de mejora, así como la predicción de asientos a 10 años aplicando los modelos Sowers (1973), Yen & Scanlon (1975), Gandola et al. (1992) y Meruelo (1994). Heterogonous characteristics of solid urban residues as well as biological decomposition of its organic components affect the geotechnical aspects of the landfills. The magnitude and the duration of the landfill settlement are one of the significant factors in studying the behavior of landfills. Although the rate of the settlement decreases as the time passes, however it is still maintained during many years after its closure. One of the methods used to reduce the settlement waste is through the dynamic consolidation methods of the solid residues. In this work, by applying the “Menard” dynamic consolidation method, we are studying the improvement of solid residue landfill in Madrid and the settlements provoked by overloading. The behavior of the solid residues through the improvement treatments as well as 10 years ahead prediction are analyzed by applying the models by Sowers (1973), Yen & Scanlon (1975), Gandola et al. (1992) and Meruelo (1994).

Estudo em laboratório do desempenho de concreto asfáltico usinado a quente empregando ligante tipo asfalto-borracha

Pesquisas sobre aplicação de borracha de pneus descartados em pavimentação asfáltica vêm sendo desenvolvidas desde a década de 1960, especialmente nos Estados Unidos e, desde o início da década de 1990, no Brasil, como alternativa para diminuição dos problemas ambientais gerados por estes resíduos sólidos. Esta pesquisa tem por objetivo avaliar o desempenho de três misturas asfálticas do tipo concreto asfáltico usinado à quente: duas empregando teores diferentes de borracha moída e óleo de xisto (CAP 40 + 12% de borracha + 10% de óleo de xisto e CAP 40 + 20% de borracha + 15% de óleo de xisto) e uma convencional. Este estudo faz parte de um programa de pesquisa coordenado pela Escola de Engenharia de São Carlos da Universidade de São Paulo (EESC-USP), Universidade Estadual de Maringá (UEM) e Petrobrás, envolvendo a execução de misturas com borracha e óleo de xisto em trechos experimentais. Foram realizadas dosagens Marshall e ensaios de resistência à tração, módulo de resiliência e fluência por compressão uniaxial estática. Os corpos-de-prova empregados nos ensaios foram moldados no teor ótimo de cimento asfáltico referente a cada uma das misturas. Constatou-se a viabilidade técnica da adição de óleo extensor para a incorporação de borracha de pneus descartados em concreto asfáltico, permitindo a obtenção de resultados satisfatórios quanto aos projetos de dosagem das misturas pelo método Marshall. Com base nos resultados dos ensaios realizados, acredita-se ser viável a execução de trechos experimentais empregando as duas misturas modificadas.

Avaliação de elementos potencialmente tóxicos em tintas

Neste trabalho são apresentados os resultados da determinação, por ICP OES, de elementos tóxicos e/ou potencialmente tóxicos (AI, Cr, Ni, Cu, Cd, As, Co e Pb) em tintas de acabamento imobiliário à base de água ou de solvente orgânico. Foram desenvolvidas e comparadas método de digestão de amostras utilizando diferentes misturas ácidas em bombas de decomposição, em fomo de microondas (sistema com radiação focalizada e com cavidade) e método de cinzas. O Método de digestão utilizando fomo de microondas com cavidade permitiu solubilização rápida e eficiente de todos os tipos de tintas testados, em tempo inferior a 35 minutos. As método apresentaram valores aceitáveis para a maioria dos elementos nos testes de adição e recuperação dos analitos. Os resíduos resultantes da digestão foram avaliados por MEV-EDS e não apresentaram os elementos estudados, comprovando a eficiência da metodologia. Mercúrio foi determinado usando um Analisador Direto de Mercúrio (DMA) e apresentou valores entre 43,0 ± 4,5 e 188 ± 9 µg Kg-1, valor considerado baixo quando comparado ao limite de 100 mg Kg-1, estabelecido na norma NRR 10004 para disposição de resíduos sólidos sem instalações especiais. O estudo da migração dos elementos para o ambiente após a exposição da tinta a agentes \"agressores\" , como raios ultravioletas e umidade, foi realizado usando câmara do tipo \"Weather-Ometer\" (envelhecimento acelerado). A avaliação dos resultados foi feita por MEV EDS e ICP OES. As micrografias de MEV mostraram que houve mudança na morfologia do polímero que foi submetido ao intemperismo acelerado. Os resultados obtidos não foram conclusivos quanto à migração dos analitos em função da baixa razão entre as massas degradada e não degradada das amostras. Uma proposta de metodologia para a avaliação por ICP OES das tintas e da disponibilidade de elementos tóxicos e potencialmente tóxicos, baseada na lixiviação de amostras secas em ambiente controlado é apresentada. São mostrados resultados de lixiviação de AI, Cr, Ni, Cu, Cd, As, Co e Pb com vários extratores e tempos diferentes de extração. Os resultados mostram que ocorre a migração de alguns elementos para as soluções estudadas e que, dos extratores avaliados, a chuva ácida apresentou maior potencial de lixiviação.

The use of lubricants in iron powder metallurgy

This investigation has been concerned with the behaviour of solid internal lubricant during mixing, compaction, ejection, dewaxing and sintering of iron powder compacts. Zinc stearate (0.01%-4.0%) was added to irregular iron powder by admixing or precipitation from solution. Pressure/density relationships, determined by continuous compaction, and loose packed densities were used to show that small additions of zinc stearate reduced interparticle friction during loose packing and at low compaction pressures. Large additions decreased particle/die-wall friction during compaction and ejection but also caused compaction inhibition. Transverse rupture strengths were determined on compacts containing various stearate based lubricants and it was found that green strength was reduced by the interposition of a thin lubricant layer within inter~particle contacts. Only materials much finer than the iron powder respectively) were able to form such layers. Investigations were undertaken to determine the effect of the decomposition of these lubricants on the development of mechanical properties in dewaxed or sintered compacts. Physical and chemical influences on tensile strength were observed. Decomposition of lubricants was associated with reductions of strength caused by the physical effects of pressure increases and removal of lubricant from interparticle contacts. There were also chemical effects associated with the influence of gaseous decomposition products and solid residues on sintering mechanisms. Thermogravimetry was used to study the decomposition behaviour of various lubricants as free compounds and within compacts. The influence of process variables such as atmosphere type, flow-rate and compact density were investigated. In a reducing atmosphere the decomposition of these lubricants was characterised by two stages. The first involved the rapid decomposition of the hydrocarbon radical. The second, higher temperature, reactions depended on lubricant type and involved solid residues. The removal of lubricant could also markedly affect dimensional change.

The intermediate pyrolysis of de-inking sludge to produce a sustainable liquid fuel

De-inking sludge is a waste product generated from secondary fibre paper mills who manufacture recycled paper into new paper sheets; it refers directly to the solid residues which evolve during the de-inking stage of the paper pulping process. The current practice for the disposal of this waste is either by land-spreading, land-filling or incineration which are unsustainable. This work has explored the intermediate pyrolysis of pre-conditioned de-inking sludge pellets in a recently patented 20 kg/h intermediate pyrolysis reactor (The Pyroformer). The reactor is essentially two co-axial screws which are configured in such a way as to circulate solids within the reactor and thus facilitate in the cracking of tars. The potential application of using the volatile organic vapours and permanent gases evolved would be to generate both combined heat and power (CHP) located at paper making sites. The results show that de-inking sludge could be successfully pyrolysed and the organic vapours produced were composed of a mixture of aromatic hydrocarbons, phenolic compounds and some fatty acid methyl esters as detected by liquid GC-MS. The calorific value of the oil after condensing was between 36 and 37 MJ/kg and the liquid fuel properties were also determined, permanent gases were detected by a GC-TCD and were composed of approximately 24% CO, 6% CH and 70% CO (v/v%). The solid residue from pyrolysis also contained a small residual calorific value, and was largely composed of mainly calcium based inert metal oxides. The application of applying intermediate pyrolysis to de-inking sludge for both CHP production and waste reduction is in principle a feasible technology which could be applied at secondary fibre paper mills. © 2013 Elsevier B.V. All rights reserved.

The intermediate pyrolysis of de-inking sludge to produce a sustainable liquid fuel

De-inking sludge is a waste product generated from secondary fibre paper mills who manufacture recycled paper into new paper sheets; it refers directly to the solid residues which evolve during the de-inking stage of the paper pulping process. The current practice for the disposal of this waste is either by land-spreading, land-filling or incineration which are unsustainable. This work has explored the intermediate pyrolysis of pre-conditioned de-inking sludge pellets in a recently patented 20 kg/h intermediate pyrolysis reactor (The Pyroformer). The reactor is essentially two co-axial screws which are configured in such a way as to circulate solids within the reactor and thus facilitate in the cracking of tars. The potential application of using the volatile organic vapours and permanent gases evolved would be to generate both combined heat and power (CHP) located at paper making sites. The results show that de-inking sludge could be successfully pyrolysed and the organic vapours produced were composed of a mixture of aromatic hydrocarbons, phenolic compounds and some fatty acid methyl esters as detected by liquid GC-MS. The calorific value of the oil after condensing was between 36 and 37 MJ/kg and the liquid fuel properties were also determined, permanent gases were detected by a GC-TCD and were composed of approximately 24% CO, 6% CH and 70% CO (v/v%). The solid residue from pyrolysis also contained a small residual calorific value, and was largely composed of mainly calcium based inert metal oxides. The application of applying intermediate pyrolysis to de-inking sludge for both CHP production and waste reduction is in principle a feasible technology which could be applied at secondary fibre paper mills. © 2013 Elsevier B.V. All rights reserved.

Gestão e gerenciamento de resíduos sólidos: diretrizes jurídico-ambientais para a sustentabilidade

rates in the Brazilian cities, which time there is an inexistent theoretical reflection about public policy statement adding the way of Urban Solid Waste (USW) and tailing integrated management plans in the majorly Brazilian cities. The unappropriated solid waste disposal and final pollution result in a strong socioenvironmental problems and material extravagancies that should be used to recycling and reusing waste material, besides bringing immense challenges for the thematic Strategy Urban and Environmental Management it considers the Sustainable City Model. Moreover, this labor projects a discussion about USW problematic through legally and environmentally point of view, including the public environmental policy and the social technologies as resolution tactics. At that time, it reports rights, scientific articles, documents and Environmental Law Doctrine on findings thematic studies, also the propose displays an interdisciplinary research methodology which combines bibliographic method - focusing theory aspects of the legally environmentally guiding principle, public policy and social technologies. Those are theorist features very important to create a Municipal Integrated Solid Waste Management Plan (PMGIRS) - modus operandi of the Federal Law n. 12.305/2010 (National Solid Waste Policy - PNRS). That policy is interesting to receive financial resources from federal government (Cities Ministry; idem, Federal Decree n. 7.404/2010 and Federal Law n. 10.257/2001) helping the preservation of the environment, regional development, generation of jobs and income (art. 6º), in addition broadening spreading’s private companies dedicated to waste management. Consequently, the PNRS contains a set of guidelines and general procedures; it should be an operation of this legal policy contextualized by Social Technologies theory (TS) into social issues, legal, economic and environmental aspects. Therefore, this research notes the possibility of public policy statement implementation over and done with the PNRS by the terms of development and sustainability in the urban space.

Educação ambiental no curso de técnico de edificações - ifsul campus Pelotas : desafios e possibilidades da educação emancipatória nos cursos técnicos

O presente trabalho de dissertação de mestrado visa a descortinar as contradições que estão presentes nas representações de docentes e discentes da disciplina de práticas construtivas do Curso Técnico de Edificações, do Instituto Federal Sul-Rio-Grandese (IFSul), campus Pelotas, em suas relações sócioeducativas, encontrando nesse desvelamento alternativas para o desenvolvimento destas atividades práticas de forma a contribuir na sustentabilidade do curso, e por conseguinte na sustentabilidade das relações entre homens, natureza e meio ambiente. A partir dessas representações sociais e contradições, esse trabalho possibilitou, através de um estudo de caso de natureza qualitativa dialética, de posse das categorias do Materialismo Dialético e Histórico e da economia política, uma compreensão dialética de como o modo de produção capitalista interfere nas ações em geral, inclusive nas relações de educação. A opção por esse assunto foi principalmente devido a constatações próprias, como professor de práticas construtivas, da necessidade de continuidade das atividades práticas no curso, mas de uma maneira mais coerente com as leis da natureza, por um processo educativo emancipador de educadores e educandos, socializando os saberes libertadores da educação ambiental. O estudo mostrou-se coerente e revelador materializando-se em possibilidades, projetos e ações imediatas de transformações dentro do curso de maneira a interferir nas relações de todos entre si e com a natureza, com uma forma possível de utilizar as matériasprimas necessárias sem o desperdício, com o máximo de aproveitamento e reciclagem, com a possibilidade de levar essas aulas práticas para fora dos muros da escola, em atividades necessárias para entidades assistenciais, minimizando a geração de resíduos sólidos a serem descartados na natureza, contribuindo dessa maneira com o perfeito relacionamento homem-homem, homem-natureza, na busca da sustentabilidade e na conservação da vida no Planeta.

Desenvolvimento e caracterização de compósitos poli(tereftalato de etileno) reciclado (PET reciclado) com flocos de vidro.

The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate new products, enlarging the cycle of materials and energy which are present. Among the polymeric residues, there is poly (ethylene terephthalate) (PET). PET is used in food packaging, preferably in the bottling of carbonated beverages. The reintegration of post-consumer PET in half can be considered a productive action mitigation of environmental impacts caused by these wastes and it is done through the preparation of several different products at the origin, i.e. food packaging, with recycling rates increasing to each year. This work focused on the development and characterization mechanical, thermal, thermo-mechanical, dynamic mechanical thermal and morphology of the pure recycled PET and recycled PET composites with glass flakes in the weight fraction of 5%, 10% and 20% processed in a single screw extruder, using the following analytical techniques: thermogravimetry (TG), differential scanning calorimetry (DSC), tensile, Izod impact, Rockwell hardness, Vicat softening temperature, melt flow rate, burn rate, dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM). The results of thermal analysis and mechanical properties leading to a positive evaluation, because in the thermograms the addition of glass flakes showed increasing behavior in the initial temperatures of thermal decomposition and melting crystalline, Furthermore was observed growing behavior in the mechanical performance of polymer composites, whose morphological structure was observed by SEM, verifying a good distribution of glass flakes, showing difference orientation in the center and in the surface layer of test body of composites with 10 and 20% of glass flakes. The results of DMTA Tg values of the composites obtained from the peak of tan ä showed little reductions due to poor interfacial adhesion between PET and recycled glass flakes.

Análise comparativa entre as propriedades do gesso obtido de rejeito da produção de sal e gesso comerciais

The environmental impacts, caused by the solid residues generation, are an often quoted concern nowadays. Some of these residues, which are originated from different human activities, can be fully reused, reducing the effects of the poor waste management on the environment. During the salt production process, the first formed crystals are discarded as industrial waste. This is mainly made of gypsum that is a calcium sulfate dihydrate (CaSO4.2H2O). The gypsum in question may go through a calcination process due to the plaster (CaSO4.0,5H2O) production and then the application on the cement industry. Considering the necessity of development and application for these industrial wastes, this paper aims to analyze the plaster, called Salgesso, from the gypsum that was generated during the salt production, and its use viability on the civil construction industry in order to create environmental and economical benefits. For characterization, the following experiments were performed: X-ray Fluorescence (XRF), X-ray Diffraction (XRD), thermal analysis (TG/DTG) and Scanning Electron Microscopy (SEM) with EDS. The following tests were also performed to obtain the mechanical characteristics: Thinness Modulus, Unit Mass, Setting Time and Compressive Resistance. Three commercial plasters used on civil construction were taken as references. All of these tests were performed according to the current standards. It was noticed that although there were some conflicting findings between the salt and commercial plasters in all of the studied properties, the Salgesso has its values within the standard limits. However, there is the possibility to improve them by doing a more effective calcination process. Three commercial plasters, used in construction, were used as reference material. All tests were performed according to standards in force. It was observed that although some tests present conflicting findings between the salt and gypsum plasters commercial properties in all of the studied Salgesso have values within the limits imposed by the standard, but can be improved simply by calcination process more effective

Composition and quality of harvest residues and soil organic matter under windrow residue management in young hoop pine plantations as revealed by solid-state C-13 NMR spectroscopy

Solid-state C-13 nuclear magnetic resonance (NMR) with cross-polarisation (CP) and magic-angle-spinning (MAS) was used to: (a) examine the changes in carbon (C) composition of windrowed harvest residues during the first 3 years of hoop pine plantations in subtropical Australia; (b) assess the impacts of windrowed harvest residues on soil organic matter (SOM) composition and quality in the 0-10 cm soil layer. Harvest residues were collected from 0-, 1-, 2- and 3-year-old windrows of ca. 2.5 m width (15 m apart for 0-, 1- and 2-year-old sites and 10 m apart for 3-year-old site). Soils from the 0 to 10 cm soil layer were collected from the 1-, 2- and 3-year-old sites. The 13C NMR spectra of the harvest residues indicated the presence of lignin in the hoop pine wood, foliage and newly incorporated organic matter (NIOM). Condensed tannin structures were found in the decay-resistant bark, small wood and foliage, but were absent in other residue components and SOM. The NMR spectra of small wood samples contained condensed tannin structures because the outer layer of bark was not removed. NIOM showed a shift from foliage-like structures (celluloses) to lignin-type structures, indicating an incorporation of woody residues from the decomposing harvest residues. Suberins were also present in the small wood, foliage and bark. The 13C CP NMR spectra of SOM indicated that in areas where windrows were present, SOM did not show compositional changes. However, an increase in SOM quality under the windrows in the second year after their formation as characterised by the alkyl C/O-alkyl C (A/O-A) ratio was mainly due to inputs from the decomposition of the labile, readily available components of the windrowed harvest residues. (C) 2002 Published by Elsevier Science B.V.