Spectrum simulation of rough and nanostructured targets from their 2D and 3D image by Monte Carlo methods

Corteo is a program that implements Monte Carlo (MC) method to simulate ion beam analysis (IBA) spectra of several techniques by following the ions trajectory until a sufficiently large fraction of them reach the detector to generate a spectrum. Hence, it fully accounts for effects such as multiple scattering (MS). Here, a version of Corteo is presented where the target can be a 2D or 3D image. This image can be derived from micrographs where the different compounds are identified, therefore bringing extra information into the solution of an IBA spectrum, and potentially significantly constraining the solution. The image intrinsically includes many details such as the actual surface or interfacial roughness, or actual nanostructures shape and distribution. This can for example lead to the unambiguous identification of structures stoichiometry in a layer, or at least to better constraints on their composition. Because MC computes in details the trajectory of the ions, it simulates accurately many of its aspects such as ions coming back into the target after leaving it (re-entry), as well as going through a variety of nanostructures shapes and orientations. We show how, for example, as the ions angle of incidence becomes shallower than the inclination distribution of a rough surface, this process tends to make the effective roughness smaller in a comparable 1D simulation (i.e. narrower thickness distribution in a comparable slab simulation). Also, in ordered nanostructures, target re-entry can lead to replications of a peak in a spectrum. In addition, bitmap description of the target can be used to simulate depth profiles such as those resulting from ion implantation, diffusion, and intermixing. Other improvements to Corteo include the possibility to interpolate the cross-section in angle-energy tables, and the generation of energy-depth maps.

A semi-automatic method for segmentation and 3D modeling of glioma tumors from brain MRI

This work presents an efficient method for volume rendering of glioma tumors from segmented 2D MRI Datasets with user interactive control, by replacing manual segmentation required in the state of art methods. The most common primary brain tumors are gliomas, evolving from the cerebral supportive cells. For clinical follow-up, the evaluation of the pre- operative tumor volume is essential. Tumor portions were automatically segmented from 2D MR images using morphological filtering techniques. These seg- mented tumor slices were propagated and modeled with the software package. The 3D modeled tumor consists of gray level values of the original image with exact tumor boundary. Axial slices of FLAIR and T2 weighted images were used for extracting tumors. Volumetric assessment of tumor volume with manual segmentation of its outlines is a time-consuming proc- ess and is prone to error. These defects are overcome in this method. Authors verified the performance of our method on several sets of MRI scans. The 3D modeling was also done using segmented 2D slices with the help of a medical software package called 3D DOCTOR for verification purposes. The results were validated with the ground truth models by the Radi- ologist.

Region-Based Feature Interpretation for Recognizing 3D Models in 2D Images

In model-based vision, there are a huge number of possible ways to match model features to image features. In addition to model shape constraints, there are important match-independent constraints that can efficiently reduce the search without the combinatorics of matching. I demonstrate two specific modules in the context of a complete recognition system, Reggie. The first is a region-based grouping mechanism to find groups of image features that are likely to come from a single object. The second is an interpretive matching scheme to make explicit hypotheses about occlusion and instabilities in the image features.

2D-3D Rigid-Body Registration of X-Ray Fluoroscopy and CT Images

The registration of pre-operative volumetric datasets to intra- operative two-dimensional images provides an improved way of verifying patient position and medical instrument loca- tion. In applications from orthopedics to neurosurgery, it has a great value in maintaining up-to-date information about changes due to intervention. We propose a mutual information- based registration algorithm to establish the proper align- ment. For optimization purposes, we compare the perfor- mance of the non-gradient Powell method and two slightly di erent versions of a stochastic gradient ascent strategy: one using a sparsely sampled histogramming approach and the other Parzen windowing to carry out probability density approximation. Our main contribution lies in adopting the stochastic ap- proximation scheme successfully applied in 3D-3D registra- tion problems to the 2D-3D scenario, which obviates the need for the generation of full DRRs at each iteration of pose op- timization. This facilitates a considerable savings in compu- tation expense. We also introduce a new probability density estimator for image intensities via sparse histogramming, de- rive gradient estimates for the density measures required by the maximization procedure and introduce the framework for a multiresolution strategy to the problem. Registration results are presented on uoroscopy and CT datasets of a plastic pelvis and a real skull, and on a high-resolution CT- derived simulated dataset of a real skull, a plastic skull, a plastic pelvis and a plastic lumbar spine segment.

Geometric and Algebraic Aspects of 3D Affine and Projective Structures from Perspective 2D Views

We investigate the differences --- conceptually and algorithmically --- between affine and projective frameworks for the tasks of visual recognition and reconstruction from perspective views. It is shown that an affine invariant exists between any view and a fixed view chosen as a reference view. This implies that for tasks for which a reference view can be chosen, such as in alignment schemes for visual recognition, projective invariants are not really necessary. We then use the affine invariant to derive new algebraic connections between perspective views. It is shown that three perspective views of an object are connected by certain algebraic functions of image coordinates alone (no structure or camera geometry needs to be involved).

Pre-procés i segmentació en imatges d’ultrasons 2D i 3D de la pròstata

Aquest projecte s'ha dut a terme amb el Grup de visió per computador del departament d'Arquitectura i Tecnologia de Computadors (ATC) de la Universitat de Girona. Està enfocat a l'anàlisi d'imatges mèdiques, en concret s'analitzaran imatges de pròstata en relació a desenvolupaments que s'estan realitzant en el grup de visió esmentat. Els objectius fixats per aquest projecte són desenvolupar dos mòduls de processamentm d'imatges els quals afrontaran dos blocs important en el tractament d'imatges, aquests dos mòduls seran un pre-processat d'imatges, que constarà de tres filtres i un bloc de segmentació per tal de cercar la pròstata dintre de les imatges a tractar. En el projecte es treballarà amb el llenguatge de programació C++, concretament amb unes llibreries que es denominen ITK (Insight Toolkit ) i són open source enfocades al tractament d'imatges mèdiques. A part d'aquesta eina s'utilitzaran d'altres com les Qt que és una biblioteca d'eines per crear entorns gràfics

Capaware: plataforma de desarrollo de software libre para aplicacines geográficas 3D multicapa

En este trabajo se presenta Capaware, una plataforma de software libre para el desarrollo de aplicaciones geográficas 3D multicapa, que surge a partir de la iniciativa del Instituto Tecnológico de Canarias en colaboración con la Universidad de Las Palmas de Gran Canaria. Este entorno simplifica la creación de aplicaciones 3D sobre territorios geográficos extensos, disponiendo de una herramienta muy visual que aporta un nuevo punto de vista muy importante para una toma de decisiones eficaz. Capaware proporciona una interfaz fácil de usar y muy flexible que simplifica el desarrollo de nuevas aplicaciones, permitiéndonos crear rápidamente entornos virtuales con múltiples capas de información sobre el terreno. Con las capacidades clásicas de un Sistema de Información Geográfica (SIG), Capaware permite actualmente la carga de capas WMS sobre entornos 3D, añadir objetos 3D sobre el terreno, y visualizar elementos dinámicos, ofreciendo una nueva perspectiva de la información analizada. Así mismo, podemos administrar las capas de recursos y elementos que se pueden representar sobre la zona geográfica en cuestión. (...)

2D versus 3D : la papiroflèxia, un recurs didàctic. '2D versus 3D : la papiroflexia, un recurso didáctico'.

Resumen tomado de la publicación en catalán

Integración de software de simulación en la docencia del Electromagnetismo.

Realizado en la Facultad de Ciencias de la Universidad de Valladolid, por 3 profesores del centro, para la asignatura de Ondas Electromagnéticas Guiadas de la Licenciatura en Física. El objetivo propuesto era la realización de presentaciones en Power Point con los contenidos de la asignatura, que incluyan ejemplos de simulación con una herramienta software en el dominio del tiempo (MEFiSTo 2D ó 3D-Pro) para ilustrar gráficamente los problemas presentados. Este material está a disposición de los alumnos a través de la página Web del Grupo de Electromagnetismo de la Universidad de Valladolid o a través de CD-ROM. El material elaborado son presentaciones en Power Point donde están los temas de la asignatura siguiendo el programa, ejemplos de simulación y transparencias de los temas en formato pdf. En el CD se incluyen aplicaciones de software necesarias para la ejecución de las simulaciones, se incluye un lector de ficheros pdf y un visor de Power Point. La impresión que está causando el proyecto en los alumnos es favorable ya que consideran el proyecto muy atractivo debido al formato.

Desarrollo personalizado de aplicaciones SIG 3D

En los últimos años la proliferación de aplicaciones 3D en SIG ha sido enorme, desde la aparición de Google Earth el usuario está familiarizado con entornos 3D. Por otra parte lo ordenadores con aceleración 3D son comunes en la actualidad y el acceso a banda ancha es prácticamente generalizado, además cada vez hay mayor cantidad de datos públicos que pueden ser utilizados por clientes SIG que sean capas de recibir datos de Internet.Hay varias librerías apropiadas para la realización de este tipo de aplicaciones. IGO SOFTWARE a comenzado a desarrollar aplicaciones 3D con las librería Nasa World Wind SDK para java.Decidimos usar estar librerías por su robustez, sencillez, cantidad de ejemplo, estar hechas en java (nos permite su unión a muchas librerías SIG) y su uso de caché local. Las aplicaciones desarrolladas en 3D no sólo son visualmente más atractivas, también nos ofrecen más información que el SIG clásico en 2D. Gracias a la integración de librerías como SEXTANTE ahora es posible también realizar análisis. En un futuro se espera poder desarrollar también algoritmos de análisis en 3D usando dicha plataforma. Por otra parte, llevamos desde hace algunos años desarrollando aplicaciones para el tratamiento de nubes de puntos proveniente de Láser Escáner y LIDAR, esta plataforma es ideal para mostrar nubes de puntos, por lo que es perfecta para visualizar nubes de puntos georreferenciadas. Mostraremos ejemplos de aplicaciones programadas con estas librerías y las posibilidades que vemos de cara a un futuro a este tipo de desarrollos

Realismo 3D aplicado a la Gestión Municipal

La visualización 3D ofrece una serie de ventajas y funcionalidades cada vez más demandadas, por lo que es conveniente su incorporación a las aplicaciones GIS. El sistema propuesto integra la vista 2D propia de un GIS y la vista 3D garantizando la interacción entre ellas y teniendo por resultado una solución GIS integral. Se permite la carga de Modelos Digitales del Terreno (MDT), de forma directa o empleando servicios OGC-CSW, para la proyección de los elementos 2D, así como la carga de modelos 3D. Además el sistema está dotado de herramientas para extrusión y generación automática de volúmenes empleando parámetros existentes en la información 2D. La generación de las construcciones a partir de su altura y la elaboración de redes tridimensionales a partir de la profundidad en las infraestructuras son algunos casos prácticos de interés. Igualmente se permite no sólo la consulta y visualización sino también la edición 3D, lo que supone una importante ventaja frente a otros sistemas 3D. LocalGIS, Sistema de Información Territorial de software libre aplicado a la gestión municipal, es el sistema GIS empleado para la incorporación del prototipo. Se permite por lo tanto aplicar todas las ventajas y funcionalidades propias del 3D a la gestión municipal que LocalGIS realiza. Esta tecnología ofrece un campo de aplicaciones muy amplio y prometedor

3D path planning with novel multiple 2D layered approach for complex human-robot interaction

Navigating cluttered indoor environments is a difficult problem in indoor service robotics. The Acroboter concept, a novel approach to indoor locomotion, represents unique opportunity to avoid obstacles in indoor environments by navigating the ceiling plane. This mode of locomotion requires the ability to accurately detect obstacles, and plan 3D trajectories through the environment. This paper presents the development of a resilient object tracking system, as well as a novel approach to generating 3D paths suitable for such robot configurations. Distributed human-machine interfacing allowing simulation previewing of actions is also considered in the developed system architecture.

Optimal 3D surface reconstruction from a small number of conventional 2D X-ray images

This paper describes a method for reconstructing 3D frontier points, contour generators and surfaces of anatomical objects or smooth surfaces from a small number, e. g. 10, of conventional 2D X-ray images. The X-ray images are taken at different viewing directions with full prior knowledge of the X-ray source and sensor configurations. Unlike previous works, we empirically demonstrate that if the viewing directions are uniformly distributed around the object's viewing sphere, then the reconstructed 3D points automatically cluster closely on a highly curved part of the surface and are widely spread on smooth or flat parts. The advantage of this property is that the reconstructed points along a surface or a contour generator are not under-sampled or under-represented because surfaces or contours should be sampled or represented with more densely points where their curvatures are high. The more complex the contour's shape, the greater is the number of points required, but the greater the number of points is automatically generated by the proposed method. Given that the number of viewing directions is fixed and the viewing directions are uniformly distributed, the number and distribution of the reconstructed points depend on the shape or the curvature of the surface regardless of the size of the surface or the size of the object. The technique may be used not only in medicine but also in industrial applications.

Ocean acoustic models for low frequency propagation in 2D and 3D environments

In this paper we are mainly concerned with the development of efficient computer models capable of accurately predicting the propagation of low-to-middle frequency sound in the sea, in axially symmetric (2D) and in fully 3D environments. The major physical features of the problem, i.e. a variable bottom topography, elastic properties of the subbottom structure, volume attenuation and other range inhomogeneities are efficiently treated. The computer models presented are based on normal mode solutions of the Helmholtz equation on the one hand, and on various types of numerical schemes for parabolic approximations of the Helmholtz equation on the other. A new coupled mode code is introduced to model sound propagation in range-dependent ocean environments with variable bottom topography, where the effects of an elastic bottom, of volume attenuation, surface and bottom roughness are taken into account. New computer models based on finite difference and finite element techniques for the numerical solution of parabolic approximations are also presented. They include an efficient modeling of the bottom influence via impedance boundary conditions, they cover wide angle propagation, elastic bottom effects, variable bottom topography and reverberation effects. All the models are validated on several benchmark problems and versus experimental data. Results thus obtained were compared with analogous results from standard codes in the literature.