An approach for graphical user interface bad smells detection

In the context of an e ort to develop methodologies to support the evaluation of interactive system, this paper investigates an approach to detect graphical user interface bad smells. Our approach consists in detecting user interface bad smells through model-based reverse engineering from source code. Models are used to de ne which widgets are present in the interface, when can particular graphical user interface (GUI) events occur, under which conditions, which system actions are executed, and which GUI state is generated next.

Framework de controlo de acessos para Triple-stores com interface Sail API

Grande parte dos triples-stores são open source e desenvolvidos em Java, disponibilizando interfaces standards e privadas de acesso. A grande maioria destes sistemas não dispõe de mecanismos de controlo de acessos nativos, o que dificulta ou impossibilita a sua adopção em ambientes em que a segurança dos factos é importante (e.g. ambiente empresarial). Complementarmente observa-se que o modelo de controlo de acesso a triplos e em particular a triplos descritos por ontologias não está standardizado nem sequer estabilizado, havendo diversos modelos de descrição e algoritmos de avaliação de permissões de acesso. O trabalho desenvolvido nesta tese/dissertação propõe um modelo e interface de controlo de acesso que permite e facilite a sua adopção por diferentes triple-stores já existentes e a integração dos triples-stores com outros sistemas já existentes na organização. Complementarmente, a plataforma de controlo de acesso não impõe qualquer modelo ou algoritmo de avaliação de permissões, mas pelo contrário permite a adopção de modelos e algoritmos distintos em função das necessidades ou desejos. Finalmente demonstra-se a aplicabilidade e validade do modelo e interface propostos, através da sua implementação e adopção ao triple-store SwiftOWLIM já existente, que não dispõe de mecanismo de controlo de acessos nativo.

Modelo generalista de páginas Web para motores de pesquisa com interface 3D

Web tornou-se uma ferramenta indispensável para a sociedade moderna. A capacidade de aceder a enormes quantidades de informação, disponível em praticamente todo o mundo, é uma grande vantagem para as nossas vidas. No entanto, a quantidade avassaladora de informação disponível torna-se um problema, que é o de encontrar a informação que precisamos no meio de muita informação irrelevante. Para nos ajudar nesta tarefa, foram criados poderosos motores de pesquisa online, que esquadrinham a Web à procura dos melhores resultados, segundo os seus critérios, para os dados que precisamos. Actualmente, os motores de pesquisa em voga, usam um formato de apresentação de resultados simples, que consiste apenas numa caixa de texto para o utilizador inserir as palavras-chave sobre o tema que quer pesquisar e os resultados são dispostos sobre uma lista de hiperligações ordenada pela relevância que o motor atribui a cada resultado. Porém, existem outras formas de apresentar resultados. Uma das alternativas é apresentar os resultados sobre interfaces em 3 dimensões. É nestes tipos de sistemas que este trabalho vai incidir, os motores de pesquisa com interfaces em 3 dimensões. O problema é que as páginas Web não estão preparadas para serem consumidas por este tipo de motores de pesquisa. Para resolver este problema foi construído um modelo generalista para páginas Web, que consegue alimentar os requisitos das diversas variantes destes motores de pesquisa. Foi também desenvolvido um protótipo de instanciação automático, que recolhe as informações necessárias das páginas Web e preenche o modelo.

Climatology of the Iberia coastal low-level wind jet: weather research forecasting model high-resolution results

Coastal low-level jets (CLLJ) are a low-tropospheric wind feature driven by the pressure gradient produced by a sharp contrast between high temperatures over land and lower temperatures over the sea. This contrast between the cold ocean and the warm land in the summer is intensified by the impact of the coastal parallel winds on the ocean generating upwelling currents, sharpening the temperature gradient close to the coast and giving rise to strong baroclinic structures at the coast. During summertime, the Iberian Peninsula is often under the effect of the Azores High and of a thermal low pressure system inland, leading to a seasonal wind, in the west coast, called the Nortada (northerly wind). This study presents a regional climatology of the CLLJ off the west coast of the Iberian Peninsula, based on a 9km resolution downscaling dataset, produced using the Weather Research and Forecasting (WRF) mesoscale model, forced by 19 years of ERA-Interim reanalysis (1989-2007). The simulation results show that the jet hourly frequency of occurrence in the summer is above 30% and decreases to about 10% during spring and autumn. The monthly frequencies of occurrence can reach higher values, around 40% in summer months, and reveal large inter-annual variability in all three seasons. In the summer, at a daily base, the CLLJ is present in almost 70% of the days. The CLLJ wind direction is mostly from north-northeasterly and occurs more persistently in three areas where the interaction of the jet flow with local capes and headlands is more pronounced. The coastal jets in this area occur at heights between 300 and 400 m, and its speed has a mean around 15 m/s, reaching maximum speeds of 25 m/s.

Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs

This work addresses both experimental and numerical analyses regarding the tensile behaviour of CFRP single-strap repairs. Two fundamental geometrical parameters were studied: overlap length and patch thickness. The numerical model used ABAQUS® software and a developed cohesive mixed-mode damage model adequate for ductile adhesives, and implemented within interface finite elements. Stress analyses and strength predictions were carried out. Experimental and numerical comparisons were performed on failure modes, failure load and equivalent stiffness of the repair. Good correlation was found between experimental and numerical results, showing that the proposed model can be successfully applied to bonded joints or repairs.

Development of an interface for ontology‐based transformation between features of different types

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial Technologies

Data analysis applied to the evaluation of a technological nature teaching model as a regional development tool

This paper presents the creation and development of technological schools directly linked to the business community and to higher public education. Establishing themselves as the key interface between the two sectors they make a signigicant contribution by having a greater competitive edge when faced with increasing competition in the tradional markets. The development of new business strategies supported by references of excellence, quality and competitiveness also provides a good link between the estalishment of partnerships aiming at the qualification of education boards at a medium level between the technological school and higher education with a technological foundation. We present a case study as an example depicting the success of Escola Tecnológica de Vale de Cambra.

Compositional multiprocessor scheduling: the GMPR interface

Composition is a practice of key importance in software engineering. When real-time applications are composed, it is necessary that their timing properties (such as meeting the deadlines) are guaranteed. The composition is performed by establishing an interface between the application and the physical platform. Such an interface typically contains information about the amount of computing capacity needed by the application. For multiprocessor platforms, the interface should also present information about the degree of parallelism. Several interface proposals have recently been put forward in various research works. However, those interfaces are either too complex to be handled or too pessimistic. In this paper we propose the generalized multiprocessor periodic resource model (GMPR) that is strictly superior to the MPR model without requiring a too detailed description. We then derive a method to compute the interface from the application specification. This method has been implemented in Matlab routines that are publicly available.

Novel optical PVC probes for on-site detection/determination of fluoroquinolones in a solid/liquid interface: Application to the determination of Norfloxacin in aquaculture water

A novel optical disposable probe for screening fluoroquinolones in fish farming waters is presented, having Norfloxacin (NFX) as target compound. The colorimetric reaction takes place in the solid/liquid interface consisting of a plasticized PVC layer carrying the colorimetric reagent and the sample solution. NFX solutions dropped on top of this solid-sensory surface provided a colour change from light yellow to dark orange. Several metals were tested as colorimetric reagents and Fe(III) was selected. The main parameters affecting the obtained colour were assessed and optimised in both liquid and solid phases. The corresponding studies were conducted by visible spectrophotometry and digital image acquisition. The three coordinates of the HSL model system of the collected image (Hue, Saturation and Lightness) were obtained by simple image management (enabled in any computer). The analytical response of the optimised solid-state optical probe against concentration was tested for several mathematical transformations of the colour coordinates. Linear behaviour was observed for logarithm NFX concentration against Hue+Lightness. Under this condition, the sensor exhibited a limit of detection below 50 μM (corresponding to about 16 mg/mL). Visual inspection also enabled semi-quantitative information. The selectivity was ensured against drugs from other chemical groups than fluoroquinolones. Finally, similar procedure was used to prepare an array of sensors for NFX, consisting on different metal species. Cu(II), Mn(II) and aluminon were selected for this purpose. The sensor array was used to detect NFX in aquaculture water, without any prior sample manipulation.

Predictive control of a current-source inverter for solar photovoltaic grid interface

Solar photovoltaic systems are an increasing option for electricity production, since they produce electrical energy from a clean renewable energy resource, and over the years, as a result of the research, their efficiency has been increasing. For the interface between the dc photovoltaic solar array and the ac electrical grid is necessary the use of an inverter (dc-ac converter), which should be optimized to extract the maximum power from the photovoltaic solar array. In this paper is presented a solution based on a current-source inverter (CSI) using continuous control set model predictive control (CCS-MPC). All the power circuits and respective control systems are described in detail along the paper and were tested and validated performing computer simulations. The paper shows the simulation results and are drawn several conclusions.

Development of a new 3D OpenFOAM® solver to model the cooling stage in profile extrusion

[Excerpt] The advantages resulting from the use of numerical modelling tools to support the design of processing equipment are almost consensual. The design of calibration systems in profile extrusion is not an exception . H owever , the complex geome tries and heat exchange phenomena involved in this process require the use of numerical solvers able to model the heat exchange in more than one domain ( calibrator and polymer), the compatibilization of the heat transfer at the profile - calibrator interface and with the ability to deal with complex geometries. The combination of all these features is usually hard to find in commercial software. Moreover , the dimension of the meshes required to ob tain accurate results, result in computational times prohibitive for industrial application. (...)

Studies in search of a suitable experimental insect model for xenodiagnosis of hosts with Chagas' disease. 1 - Comparative xenodiagnosis with nine triatomine species of animals with acute infections by Trypanosoma cruzi

In search of a suitable vector species for xenodiagnosis of humans and animals with chronic Chagas' disease we first investigated the reactions of different vector species to acute infection with Trypanosoma cruzi. Vector species utilized in this study were: Triatoma infestans, Rhodnius prolixus and Triatoma dimidiata, all well adapted to human habitats; Triatoma rubrovaria and Rhodnius neglectus both considered totally wild species; Panstrongylus megistus, Triatoma sordida, Triatoma pseudomaculata and Triatoma brasiliensis, all essentially sylvatic but some with domiciliary tendencies and others restricted to peridomestic biotopes with incipient colonization of human houses after successful eradication of T. infestans. Results summarized in Table IV suggest the following order of infectivity among the 9 studied vector species: P. megistus with 97.8% of infected bugs, T. rubrovaria with 95% of positive bugs a close second followed by T. Pseudomaculata with 94.3% and R. neglectus with 93.8% of infected bugs, almost identical thirds. R. prolixus, T. infestans and T. dimidiata exhibited low infection rates of 53.1%, 51.6% and 38.2% respectively, coupled with sharp decreases occuring with aging of infection (Fig. 1). The situation was intermediate in T. brasiliensis and T. sordida infection rates being 76.9% and 80% respectively. Results also point to the existence of a close correlation between prevalence and intensity of infection in that, species with high infection rates ranging from 93.8% to 97.8% exhibited relatively large proportions of insects (27.3% - 33.5%) harbouring very dense populations of T. cruzi. In species with low infection rates ranging from 38.2% to 53.1% the proportion of bugs demonstrating comparable parasite densities was at most 6%. No differences attributable to blood-meal size or to greater susceptibility of indigenous vector species to parasites of their own geographical area, as suggested in earlier...

Mutagenesis and modelling of the alpha(1b)-adrenergic receptor highlight the role of the helix 3/helix 6 interface in receptor activation.

Computer simulations on a new model of the alpha1b-adrenergic receptor based on the crystal structure of rhodopsin have been combined with experimental mutagenesis to investigate the role of residues in the cytosolic half of helix 6 in receptor activation. Our results support the hypothesis that a salt bridge between the highly conserved arginine (R143(3.50)) of the E/DRY motif of helix 3 and a conserved glutamate (E289(6.30)) on helix 6 constrains the alpha1b-AR in the inactive state. In fact, mutations of E289(6.30) that weakened the R143(3.50)-E289(6.30) interaction constitutively activated the receptor. The functional effect of mutating other amino acids on helix 6 (F286(6.27), A292(6.33), L296(6.37), V299(6.40,) V300(6.41), and F303(6.44)) correlates with the extent of their interaction with helix 3 and in particular with R143(3.50) of the E/DRY sequence.

Oxidative stress and inflammation response after nanoparticle exposure : differences between human lung cell monocultures and an advanced three-dimensional model of the human epithelial airways

Combustion-derived and manufactured nanoparticles (NPs) are known to provoke oxidative stress and inflammatory responses in human lung cells; therefore, they play an important role during the development of adverse health effects. As the lungs are composed of more than 40 different cell types, it is of particular interest to perform toxicological studies with co-cultures systems, rather than with monocultures of only one cell type, to gain a better understanding of complex cellular reactions upon exposure to toxic substances. Monocultures of A549 human epithelial lung cells, human monocyte-derived macrophages and monocyte-derived dendritic cells (MDDCs) as well as triple cell co-cultures consisting of all three cell types were exposed to combustion-derived NPs (diesel exhaust particles) and to manufactured NPs (titanium dioxide and single-walled carbon nanotubes). The penetration of particles into cells was analysed by transmission electron microscopy. The amount of intracellular reactive oxygen species (ROS), the total antioxidant capacity (TAC) and the production of tumour necrosis factor (TNF)-a and interleukin (IL)-8 were quantified. The results of the monocultures were summed with an adjustment for the number of each single cell type in the triple cell co-culture. All three particle types were found in all cell and culture types. The production of ROS was induced by all particle types in all cell cultures except in monocultures of MDDCs. The TAC and the (pro-)inflammatory reactions were not statistically significantly increased by particle exposure in any of the cell cultures. Interestingly, in the triple cell co-cultures, the TAC and IL-8 concentrations were lower and the TNF-a concentrations were higher than the expected values calculated from the monocultures. The interplay of different lung cell types seems to substantially modulate the oxidative stress and the inflammatory responses after NP exposure. [Authors]

Intestinal fibrovascular nodules caused by Schistosoma mansoni infection in Calomys callosus Rengger, 1830 (Rodentia: Cricetidae): a model of concomitant fibrosis and angiogenesis

Human schistosomiasis develops extensive and dense fibrosis in portal space, together with congested new blood vessels. This study demonstrates that Calomys callosus infected with Schistosoma mansoni also develops fibrovascular lesions, which are found in intestinal subserosa. Animals were percutaneously infected with 70 cercariae and necropsied at 42, 45, 55, 80, 90 and 160 days after infection. Intestinal sections were stained for brightfield, polarization microscopy, confocal laser scanning, transmission and scanning electron microscopies. Immunohistological analysis was also performed and some nodules were aseptically collected for cell culture. Numerous intestinal nodules, appearing from 55 up to 160 days after infection, were localized at the interface between external muscular layer and intestinal serosa, consisting of fibrovascular tissue forming a shell about central granuloma(s). Intranodular new vessels were derived from the vasculature of the external vascular layer and were positive for laminin, chondroitin-sulfate, smooth muscle alpha-actin and FVIII-RA. Fibroblastic cells and extracellular matrix components (collagens I, III and VI, fibronectin and tenascin) comprised the stroma. Intermixed with the fibroblasts and vessels there were variable number of eosinophils, macrophages and haemorrhagic foci. In conclusion, the nodules constitute an excellent and accessible model to study fibrogenesis and angiogenesis, dependent on S. mansoni eggs. The fibrogenic activity is fibroblastic and not myofibroblastic-dependent. The angiogenesis is so prominent that causes haemorrhagic ascites.