Correlation between the mechanical cycling behavior and microstructure in laser welded joints using NiTi memory shape alloys

Dissertação para obtenção do Grau de Mestre em Engenharia de Materiais

Glasses' makeup: the simple and the combined effect of color and shape on perceived volume and beverage intake

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Gas tungsten arc welding of NiTi shape memory alloy

Shape memory alloys are characterized by the ability of recovering their initial shape after being deformed and by superelasticity. Since the discovery of these alloys, a new field of interest emerged not only for the scientific community but also to many industries. However, these alloys present poor machinability which constitute a constrain in the design of complex components for new applications. Thus, the demand for joining techniques able to join these alloys without compromising their properties became of great importance to enlarge the complexity of existing applications. Literature shows that these alloys are joined mainly using laser welding. In the present study, similar NiTi butt joints, were produced using TIG welding. The welds were performed in 1.5 mm thick plates across the rolling direction. A special fixture and gas assist device was designed and manufactured. Also a robot arm was adapted to accommodate the welding torch to assure the repeatability of the welding parameters. Welds were successfully achieved without macroscopic defects, such as pores and distortions. Very superficial oxidation was seen on the top surface due to insufficient shielding gas flow on the weld face. The welded joints were mechanically tested and structurally characterized. Testing methods were used to evaluate macro and microstructure, as well as the phase transformation temperatures, the mechanical single and cyclic behaviour and the shape recovery ability. Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), microhardness measurements were techniques also used to evaluate the welded joints. A depletion in Ni in the fusion zone was seen, as well as a shift in Ms temperature. For strain values of 4% the accumulated irrecoverable strain was of about 30% and increased with the strain imposed during cycling. Nevertheless, a complete recovery of initial shape was observed when testing the shape memory effect on a dedicated device that introduces a deformation of 6.7%. That is, the welding procedure does not remove the ability of the specimens to recover their initial shape.

Finding new opportunities in the Lisbon market through Whitaker consumer lifestyle segmentation

A sample of 445 consumers resident in distinct Lisbon areas was analyzed through direct observations in order to discover each lifestyle’s current proportion, applying the Whitaker Lifestyle™ Method. The findings of the conducted hypothesis tests on the population proportion unveil that Neo-Traditional and Modern Whitaker lifestyles have the significantly highest proportion, while the overall presence of different lifestyles varies across neighborhoods. The research further demonstrates the validity of Whitaker observation techniques, media consumption differences among lifestyles and the importance of style and aesthetics while segmenting consumers by lifestyles. Finally, market opportunities are provided for firms operating in Lisbon.

Shrinking shrinkage:How and why is fruit shrinkage being caused in Sonaemc's convenience stores? Finding opportunities of improvement envisioning its optimization

This work project regards a challenge presented by a Portuguese organization on the retail sector, SONAEMC, which is a case study of how and why fruit shrinkage occurs in the fruit supply chain within their convenience stores. A qualitative research methodology enabled to infer in which stages throughout the chain shrinkage’s causes occur and, to conclude that internal rules for procedures and processes are not always followed and whose compliance would be enough to reduce fruit shrinkage. The key conclusion is that if fruit stock loss is reduced by as much as 15% the category’s profitability could increase about 8%.

New strategies for active finding of leprosy cases in the Amazonian region

AbstractINTRODUCTION: The use of the Self-Image Form (SIF) expands the identification of active leprosy cases to neighbors of index cases.METHODS: The SIF was used to screen two groups: case (neighbors of index cases of leprosy) and control (individuals residing next to houses without leprosy) group. A specialist investigated suspected leprosy cases for disease confirmation.RESULTS: New cases of leprosy were diagnosed in the case group (n = 7, 8.6%), but not the control group.CONCLUSIONS: The new surveillance strategy is inexpensive, efficient, and feasible within a primary health strategy. Future studies can help improve the use of the SIF.

Finding the hidden influencers

This thesis is a first step in the search for the characteristics of funders, and the underlying motivation that drives them to participate in crowdfunding. The purpose of the study is to identify demographics and psychographics that influence a funder’s willingness to financially support a crowdfunding project (WFS). Crowdfunding, crowdsourcing and donation literature are combined to create a conceptual model in which age, gender, altruism and income, together with several control variables, are expected to have an influence on a funder’s WFS. Primary data collection was conducted using a survey, and a dataset of 175 potential crowdfunders was created. The data is analysed using a multiple regression and provided several interesting results. First of all, age and gender have a significant effect on WFS, males and young adults until the age of 30 have a higher intention to give money to crowdfunding projects. Second, altruism is significantly positively related to WFS, meaning that the funders do not just care about the potential rewards they could receive, but also about the benefits that they create for the entrepreneur and the people affected by the crowdfunding project. Third, the moderation effect of income was found to be insignificant in this model. It shows that income does not affect the strength of the relationship between the age, gender and altruism, and WFS. This study provides important theoretical contributions by, to the best of my knowledge, being the first study to quantitatively investigate the characteristics of funders and using the funder as the unit of analysis. Moreover, the study provides important insights for entrepreneurs who wish to target the crowd better in order to attract and retain more funders, thereby increasing the chance of success of their project.

Bioactive nanocomposite spheres with proved shape memory capability in bone defects

Bioactive glass nanoparticles (BGNPs) promote an apatite surface layer in physiologic conditions that lead to a good interfacial bonding with bone.1 A strategy to induce bioactivity in non-bioactive polymeric biomaterials is to incorporate BGNPs in the polymer matrix. This combination creates a nanocomposite material with increased osteoconductive properties. Chitosan (CHT) is a polymer obtained by deacetylation of chitin and is biodegradable, non-toxic and biocompatible. The combination of CHT and the BGNPs aims at designing biocompatible spheres promoting the formation of a calcium phosphate layer at the nanocomposite surface, thus enhancing the osteoconductivity behaviour of the biomaterial. Shape memory polymers (SMP) are stimuli-responsive materials that offer mechanical and geometrical action triggered by an external stimulus.2 They can be deformed and fixed into a temporary shape which remains stable unless exposed to a proper stimulus that triggers recovery of their original shape. This advanced functionality makes such SMPs suitable to be implanted using minimally invasive surgery procedures. Regarding that, the inclusion of therapeutic molecules becomes attractive.  We propose the synthesis of shape memory bioactive nanocomposite spheres with drug release capability.3   1.  L. L. Hench, Am. Ceram. Soc. Bull., 1993, 72, 93-98. 2.  A. Lendlein and S. Kelch, Angew Chem Int Edit, 2002, 41, 2034-2057. 3.  Ã . J. Leite, S. G. Caridade and J. F. Mano, Journal of Non-Crystalline Solids (in Press)

Connecting free volume with shape memory properties in noncytotoxic gamma-irradiated polycyclooctene

The free volume holes of a shape memory polymer have been analysed considering that the empty space between molecules is necessary for the molecular motion, and the shape memory response is based on polymer segments acting as molecular switches through variable flexibility with temperature or other stimuli. Therefore, thermomechanical analysis (TMA) and positron annihilation lifetime spectroscopy (PALS) have been applied to analyse shape recovery and free volume hole sizes in gamma irradiated polycyclooctene (PCO) samples, as a non-cytotoxic alternative to more conventional PCO crosslinked via peroxide for future applications in medicine. Thus, a first approach relating structure, free volume holes and shape memory properties in gamma irradiated PCO is presented. The results suggest that free volume holes caused by gamma irradiation in PCO samples facilitate the recovery process by improving movement of polymer chains and open t possibilities for the design and control of the macroscopic response.

The role of automatic shape and position recognitionin streamlining manufacturing

The main features of most components consist of simple basic functional geometries: planes, cylinders, spheres and cones. Shape and position recognition of these geometries is essential for dimensional characterization of components, and represent an important contribution in the life cycle of the product, concerning in particular the manufacturing and inspection processes of the final product. This work aims to establish an algorithm to automatically recognize such geometries, without operator intervention. Using differential geometry large volumes of data can be treated and the basic functional geometries to be dealt recognized. The original data can be obtained by rapid acquisition methods, such as 3D survey or photography, and then converted into Cartesian coordinates. The satisfaction of intrinsic decision conditions allows different geometries to be fast identified, without operator intervention. Since inspection is generally a time consuming task, this method reduces operator intervention in the process. The algorithm was first tested using geometric data generated in MATLAB and then through a set of data points acquired by measuring with a coordinate measuring machine and a 3D scan on real physical surfaces. Comparison time spent in measuring is presented to show the advantage of the method. The results validated the suitability and potential of the algorithm hereby proposed

Análise estrutural e dimensionamento de estruturas de membrana

Dissertação de mestrado integrado em Engenharia Civil

Synthetic biology approaches to shape bacteriophages towards Pseudomonas aeruginosa biofilm control

Dissertation for Ph.D. degree in Biomedical Engineering.

Capturing the essence of shape of polygonal meshes

Polygonal meshes, essential shape representation, feature detection, external skeleton, mesh decimation, progrssive meshes, silhouettes, hidden line removal, non-photorealistic rendering, OpenNPAR

Active shape structural model

Shape model, deformable models, structural models, biometry, content based image retrieval, sketches