Identifying (territorial) tensions in the servitization value chain

Purpose: To understand the tensions that servitization activities create between actors within networks. Design/methodology/approach: Interviews were conducted with manufacturers, intermediaries and customers across a range of industrial sectors. Findings: Tensions relating to two key sets of capabilities are identified: in developing or acquiring (i) operant technical expertise and (ii) operand service infrastructure. The former tension concerns whom knowledge is co-created with and where expertise resides. The latter involves a territorial investment component; firms developing strategies to acquire greater access to, or ownership of, infrastructures closer to customers. Developing and acquiring these capabilities is a strategic decision on the part of managers of servitizing firms, in order to gain recognized power and control in a particular territory. Originality/value: This paper explores how firms’ servitization activities involve value appropriation (from the rest of the network), contrasting with the narrative norm for servitization: that it creates additional value. There is a need to understand the tensions that servitization activities create within networks. Some firms may be able to improve servitization performance through co-operation rather than competition, generating co-opetitive relationships. Others may need to become much more aggressive, if they are to take a greater share of the ‘value’ from the value chain.

Decision support system for vendor managed inventory supply chain:a case study

Vendor-managed inventory (VMI) is a widely used collaborative inventory management policy in which manufacturers manages the inventory of retailers and takes responsibility for making decisions related to the timing and extent of inventory replenishment. VMI partnerships help organisations to reduce demand variability, inventory holding and distribution costs. This study provides empirical evidence that significant economic benefits can be achieved with the use of a genetic algorithm (GA)-based decision support system (DSS) in a VMI supply chain. A two-stage serial supply chain in which retailers and their supplier are operating VMI in an uncertain demand environment is studied. Performance was measured in terms of cost, profit, stockouts and service levels. The results generated from GA-based model were compared to traditional alternatives. The study found that the GA-based approach outperformed traditional methods and its use can be economically justified in small- and medium-sized enterprises (SMEs).

Servitization and competitive advantage:the importance of organizational structure and value chain position

Servitization represents a business-model change and organizational transformation from selling goods to selling an integrated combination of goods and services. Competitive advantage is one outcome of this shift. During servitization, companies follow stages to realize services as an opportunity to differentiate from goods and achieve higher customer satisfaction. This study analyzes this transition from base, intermediate, and advanced services by presenting results from 102 senior executives in multinational companies. Our results suggest increasing interest in service-led strategies in manufacturing companies. The results also show that increasing differentiation and high customer satisfaction are fundamental to achieving competitive advantage and superior performance with services. The analysis also indicates the importance of a company’s position in the value chain and the organizational structure it selects to support services in successful servitization.

The challenges of representing human behaviour in simulation models:some case examples from supply chain, evacuation modelling and rail disruption

As more of the economy moves from traditional manufacturing to the service sector, the nature of work is becoming less tangible and thus, the representation of human behaviour in models is becoming more important. Representing human behaviour and decision making in models is challenging, both in terms of capturing the essence of the processes, and also the way that those behaviours and decisions are or can be represented in the models themselves. In order to advance understanding in this area, a useful first step is to evaluate and start to classify the various types of behaviour and decision making that are required to be modelled. This talk will attempt to set out and provide an initial classification of the different types of behaviour and decision making that a modeller might want to represent in a model. Then, it will be useful to start to assess the main methods of simulation in terms of their capability in representing these various aspects. The three main simulation methods, System Dynamics, Agent Based Modelling and Discrete Event Simulation all achieve this to varying degrees. There is some evidence that all three methods can, within limits, represent the key aspects of the system being modelled. The three simulation approaches are then assessed for their suitability in modelling these various aspects. Illustration of behavioural modelling will be provided from cases in supply chain management, evacuation modelling and rail disruption.

Single-Server Queueing System with Markov-Modulated Arrivals and Service Times

Key words: Markov-modulated queues, waiting time, heavy traffic.

Non-stationary stochastic inventory lot-sizing with emission and service level constraints in a carbon cap-and-trade system

Firms worldwide are taking major initiatives to reduce the carbon footprint of their supply chains in response to the growing governmental and consumer pressures. In real life, these supply chains face stochastic and non-stationary demand but most of the studies on inventory lot-sizing problem with emission concerns consider deterministic demand. In this paper, we study the inventory lot-sizing problem under non-stationary stochastic demand condition with emission and cycle service level constraints considering carbon cap-and-trade regulatory mechanism. Using a mixed integer linear programming model, this paper aims to investigate the effects of emission parameters, product- and system-related features on the supply chain performance through extensive computational experiments to cover general type business settings and not a specific scenario. Results show that cycle service level and demand coefficient of variation have significant impacts on total cost and emission irrespective of level of demand variability while the impact of product's demand pattern is significant only at lower level of demand variability. Finally, results also show that increasing value of carbon price reduces total cost, total emission and total inventory and the scope of emission reduction by increasing carbon price is greater at higher levels of cycle service level and demand coefficient of variation. The analysis of results helps supply chain managers to take right decision in different demand and service level situations.

Representing supply chain events on the Web of data

The Electronic Product Code Information Service (EPCIS) is an EPCglobal standard, that aims to bridge the gap between the physical world of RFID1 tagged artifacts, and information systems that enable their tracking and tracing via the Electronic Product Code (EPC). Central to the EPCIS data model are "events" that describe specific occurrences in the supply chain. EPCIS events, recorded and registered against EPC tagged artifacts, encapsulate the "what", "when", "where" and "why" of these artifacts as they flow through the supply chain. In this paper we propose an ontological model for representing EPCIS events on the Web of data. Our model provides a scalable approach for the representation, integration and sharing of EPCIS events as linked data via RESTful interfaces, thereby facilitating interoperability, collaboration and exchange of EPC related data across enterprises on a Web scale.

To what extent and in what manner do Chinese and Indian contract research organisation learn and upgrade with the unbundling the global pharmaceutical R&D value chain?

The paper applies the GVC framework to analyse the organisational and geographical reconfiguration of the global R&D function of leading US and European pharmaceutical MNCs. Though pharmaceutical MNCs have been outsourcing clinical trial activities since the mid-1990s, the outsourcing of discovery research tasks is a phenomenon of the 2000s (Ramirez 2013). Moreover, in the context of a crisis of R&D productivity and increasing pressure from shareholders, a number of US and European pharmaceutical MNCs are breaking up their R&D function in an attempt to increase flexibility and reduce risk as well as costs and are thereby restructuring the global architecture of their R&D function. This break-up, or unbundling (Sako 2006), of the R&D function is particularly interesting given the prevalence of market failure in innovation (Howells et al 2008), the non-modular nature of the R&D process in this industry (Pisano 2006) and the strategic important of this activity to the core competence and long-term competitive advantage of firms in this sector. The focus of this paper is on the outsourcing of R&D activities to Chinese and Indian independently-owned contract research organisations (CROs) and the way these firms are becoming integrated as service providers into the global R&D function (or R&D value chain) of pharmaceutical MNCs. Above all the paper is concerned with the development of capabilities of CROs from these two countries and the dynamics of upgrading in GVCs in knowledge-intensive functions. The paper therefore discusses the role of both knowledge flows within global pharmaceutical R&D value chains as well as national innovation systems on the development of capabilities of Chinese and Indian CROs. Our analysis is based on data from semi-structured interviews collected from senior R&D managers from a sample of ten US and European pharmaceutical MNCs and owners and senior R&D managers from five Chinese and five Indian CROs who are providing research services to MNCs in this industry. We discuss the emergence of R&D outsourcing in this industry and the nature and mechanisms of knowledge flows within R&D value chains. The embeddedness of CROS in the national innovation systems of their home countries is also discussed.

Szolgáltatások ellátási láncának speciális menedzsment jellemzői = Specialties in managing service supply chains

Az elmúlt évtizedekben a gazdálkodástudomány kitüntetett figyelemmel kísért két - mind a makrogazdaság, mind az egyes vállalatok működésének sikere szempontjából meghatározó fontosságú - jelenséget, egyrészt a szolgáltatásoknak a hagyományos termeléssel szembeni egyre erőteljesebb térnyerését, másrészt a fogyasztói érték teremtése szempontjából növekvő jelentőségű ellátási láncoknak, illetve azok menedzsmentjének kérdéskörét. Ugyanakkor igen kevés elemzés, de kevés leíró jellegű munka is született a két jelenséget és menedzsment problémát összekapcsoló területről, azaz a szolgáltatások ellátási láncáról, ezen ellátási láncok kezelésének speciális problémáiról. Jelen műhelytanulmányban a szolgáltatások ellátási láncának és menedzsmentjének jellegzetességeit, a klasszikus terméket előállító ellátási láncokhoz viszonyított sajátosságait foglaltuk össze a nemzetközi szakirodalom alapján. Ennek során bemutattuk, hogy az ún. tiszta szolgáltatások széles körben ismert jellemzői hatással vannak a szolgáltatások előállítását és értékesítését végző ellátási láncok működésére is. Ezek a hatások és a specialitások megjelennek az ellátási lánc menedzsment irodalomban megjelenő mindhárom problémakörre, rányomják tehát bélyegüket mind az ellátási lánc felépítésére, struktúrájára, mind az ellátási láncban együttműködő partnerek kapcsolatának = In the last decades scholars have paid a lot of attention to both service operation and supply chain management. There is still limited research on the overlapping field of theses two management areas, on service supply chain specialties. This working paper gives a structured overview on the latest research results published in English. Doing so the paper would like to draw attention of the Hungarian researchers to this field and facilitate these empirical researches. As described in the paper traditional service specialties (intangibility, perishability, inseparability, heterogeneity and the importance of human capital) create special management problems concerning (i) the structure of these supply chains, (ii) their relationship management and (iii) the management of supply chain processes.

A szolgáltatások ellátási láncának speciális menedzsmentjellemzői (Management specialties of supply chain of services)

Az elmúlt évtizedekben a gazdálkodástudomány kitüntetett figyelemmel kísért két – mind a makrogazdaság, mind az egyes vállalatok működésének sikere szempontjából meghatározó fontosságú – jelenséget, egyrészt a szolgáltatásoknak a hagyományos termeléssel szembeni egyre erőteljesebb térnyerését, másrészt a fogyasztói érték teremtése szempontjából növekvő jelentőségű ellátási láncoknak, illetve azok menedzsmentjének kérdéskörét. Ugyanakkor igen kevés elemzés, de kevés leíró jellegű munka is született a két jelenséget és menedzsmentproblémát összekapcsoló területről, azaz a szolgáltatások ellátási láncáról, ezen ellátási láncok kezelésének speciális problémáiról. A szerzők cikkükben a szolgáltatások ellátási láncának és menedzsmentjének jellegzetességeit, a klasszikus terméket előállító ellátási láncokhoz viszonyított sajátosságait foglalják össze a nemzetközi szakirodalom alapján. Ennek során bemutatják, hogy az ún. tiszta szolgáltatások széles körben ismert jellemzői hatással vannak a szolgáltatások előállítását és értékesítését végző ellátási láncok működésére is. Ezek a hatások és specialitások megjelennek az ellátásilánc-menedzsment irodalmában kiemelten tárgyalt mindhárom problémakörben, rányomják tehát bélyegüket mind az ellátási lánc felépítésére, mind az ellátási láncban együttműködő partnerek kapcsolatának kezelésére és végül, de nem utolsósorban az ellátásilánc-menedzsment folyamatok kezelésére. _________ In the last decades scholars have paid a lot of attention to both service operation and supply chain management. There is still limited research on the overlapping field of theses two management areas, on service supply chain specialties. This article gives a structured overview on the latest research results on this topic. Doing so the paper would like to draw attention of the Hungarian researchers to this field and facilitate these empirical researches. As described in the paper traditional service specialties (intangibility, perishability, inseparability, heterogeneity and the importance of human capital) create special management problems concerning (i) the structure of these supply chains, (ii) their relationship management and (iii) the management of supply chain processes.

Best practices in exemplary service delivery: A multiple case study of service quality

The purpose of this study was to explain how exemplary service providers in luxury hotels provide consistently excellent service. Using a case study framework, the study investigated the service provider's strategies and concepts of service delivery, the importance and implementation of organizational and individual controls, and the role of training and learning. The study identified barriers to service provision and characteristics of the exemplary individuals that affect their ability to deliver luxury service. This study sought to better understand how exemplary service providers learn, think about, and do their work. The sample population of three Five-Diamond-Award winning resorts was selected for their potential for learning about the phenomenon of interest. The results demonstrate that exemplary service providers possess individual characteristics that are enhanced by the organizations for which they work. Exemplary service providers are often exemplary communicators who are emotionally generous and genuinely enjoy helping and serving others. Exemplary service organizations treat their employees as they treat their customers, as suggested by the Service-Profit Chain (Heskett, Sasser & Schlesinger, 1997). Further, they have systems and standards to guarantee satisfactory service experiences for every guest. They also encourage their service providers to personalize their service delivery and to seek opportunities to delight their guests, using a combination of controls, traditions and cultural values. Several customer service theories are discussed in relationship to whether they were or were not supported by the data. The study concluded that the delivery of exemplary service is a complex phenomenon that requires successful interactions between guests, service providers and the organization. A Model of Exemplary Service Delivery is presented and discussed that demonstrates the components of service quality as shown in the data. The model can be used by practitioners seeking to create, enhance, or evaluate their service quality, and by researchers seeking insights into the complex concepts in service quality research. Implications for future research are discussed.

A capability maturity model to assess supply chain performance

In an overcapacity world, where the customers can choose from many similar products to satisfy their needs, enterprises are looking for new approaches and tools that can help them not only to maintain, but also to increase their competitive edge. Innovation, flexibility, quality, and service excellence are required to, at the very least, survive the on-going transition that industry is experiencing from mass production to mass customization. In order to help these enterprises, this research develops a Supply Chain Capability Maturity Model named S(CM)2. The Supply Chain Capability Maturity Model is intended to model, analyze, and improve the supply chain management operations of an enterprise. The Supply Chain Capability Maturity Model provides a clear roadmap for enterprise improvement, covering multiple views and abstraction levels of the supply chain, and provides tools to aid the firm in making improvements. The principal research tool applied is the Delphi method, which systematically gathered the knowledge and experience of eighty eight experts in Mexico. The model is validated using a case study and interviews with experts in supply chain management. The resulting contribution is a holistic model of the supply chain integrating multiple perspectives, and providing a systematic procedure for the improvement of a company’s supply chain operations.

Customer Perception of Drive-Thru Service

The rapid growth of off-premise dining and, consequently, drive- thru service, presents the challenge of building customer loyalty in a highly competitive marketplace. In this study, customer perceptions of drive-thru service associated with quick service restaurants were examined. Results suggest that service time appears to differ among quick service restaurants, even those within the same chain. Employee courtesy was rated positively at all restaurants, as was food quality. The implications of these results for restaurateurs who offer drive-thru service are discussed.

A branch and efficiency algorithm for the optimal design of supply chain networks

Supply chain operations directly affect service levels. Decision on amendment of facilities is generally decided based on overall cost, leaving out the efficiency of each unit. Decomposing the supply chain superstructure, efficiency analysis of the facilities (warehouses or distribution centers) that serve customers can be easily implemented. With the proposed algorithm, the selection of a facility is based on service level maximization and not just cost minimization as this analysis filters all the feasible solutions utilizing Data Envelopment Analysis (DEA) technique. Through multiple iterations, solutions are filtered via DEA and only the efficient ones are selected leading to cost minimization. In this work, the problem of optimal supply chain networks design is addressed based on a DEA based algorithm. A Branch and Efficiency (B&E) algorithm is deployed for the solution of this problem. Based on this DEA approach, each solution (potentially installed warehouse, plant etc) is treated as a Decision Making Unit, thus is characterized by inputs and outputs. The algorithm through additional constraints named “efficiency cuts”, selects only efficient solutions providing better objective function values. The applicability of the proposed algorithm is demonstrated through illustrative examples.

Frontline employees’ innovative service behavior as key to customer loyalty:insights into FLEs’ resource gain spiral

Many service firms require frontline service employees (FLEs) to follow routines and standardized operating procedures during the service encounter, to deliver consistently high service standards. However, to create superior, pleasurable experiences for customers, featuring both helpful services and novel approaches to meeting their needs, firms in various sectors also have begun to encourage FLEs to engage in more innovative service behaviors. This study therefore investigates a new and complementary route to customer loyalty, beyond the conventional service-profit chain, that moves through FLEs' innovative service behavior. Drawing on conservation of resources (COR) theory, this study introduces a resource gain spiral at the service encounter, which runs from FLEs' emotional job engagement to innovative service behavior, and then leads to customer delight and finally customer loyalty. In accordance with COR theory, the proposed model also includes factors that might hinder (customer aggression, underemployment) or foster (colleague support, supervisor support) FLEs' resource gain spiral. A multilevel analysis of a large-scale, dyadic data set that contains responses from both FLEs and customers in multiple industries strongly supports the proposed resource gain spiral as a complementary route to customer loyalty. The positive emotional job engagement-innovative service behavior relationship is undermined by customer aggression and underemployment, as hypothesized. Surprisingly though, and contrary to the hypotheses, colleague and supervisor support do not seem to foster FLEs' resource gain spiral. Instead, colleague support weakens the engagement-innovative service behavior relationship, and supervisor support does not affect it. These results indicate that if FLEs can solicit resources from other sources, they may not need to invest as many of their individual resources. In particular, colleague support even appears to serve as a substitute for FLEs' individual resource investments in the resource gain spiral.