Deposits of the sandy braided South Saskatchewan River: Implications for the use of modern analogs in reconstructing channel dimensions in reservoir characterization

Estimation of the dimensions of fluvial geobodies from core data is a notoriously difficult problem in reservoir modeling. To try and improve such estimates and, hence, reduce uncertainty in geomodels, data on dunes, unit bars, cross-bar channels, and compound bars and their associated deposits are presented herein from the sand-bed braided South Saskatchewan River, Canada. These data are used to test models that relate the scale of the formative bed forms to the dimensions of the preserved deposits and, therefore, provide an insight as to how such deposits may be preserved over geologic time. The preservation of bed-form geometry is quantified by comparing the Alluvial architecture above and below the maximum erosion depth of the modem channel deposits. This comparison shows that there is no significant difference in the mean set thickness of dune cross-strata above and below the basal erosion surface of the contemporary channel, thus suggesting that dimensional relationships between dune deposits and the formative bed-form dimensions are likely to be valid from both recent and older deposits. The data show that estimates of mean bankfull flow depth derived from dune, unit bar, and cross-bar channel deposits are all very similar. Thus, the use of all these metrics together can provide a useful check that all components and scales of the alluvial architecture have been identified correctly when building reservoir models. The data also highlight several practical issues with identifying and applying data relating to cross-strata. For example, the deposits of unit bars were found to be severely truncated in length and width, with only approximately 10% of the mean bar-form length remaining, and thus making identification in section difficult. For similar reasons, the deposits of compound bars were found to be especially difficult to recognize, and hence, estimates of channel depth based on this method may be problematic. Where only core data are available (i.e., no outcrop data exist), formative flow depths are suggested to be best reconstructed using cross-strata formed by dunes. However, theoretical relationships between the distribution of set thicknesses and formative dune height are found to result in slight overestimates of the latter and, hence, mean bankfull flow depths derived from these measurements. This article illustrates that the preservation of fluvial cross-strata and, thus, the paleohydraulic inferences that can be drawn from them, are a function of the ratio of the size and migration rate of bed forms and the time scale of aggradation and channel migration. These factors must thus be considered when deciding on appropriate length:thickness ratios for the purposes of object-based modeling in reservoir characterization.

Chemical study of leaves of Chrysophyllum marginatum (Hook. & Arn.) Radlk (Sapotaceae)

The fractionation of the antioxidant ethyl acetate extract obtained from the dried leaves of Chrysophyllum marginatum afforded six substances identified as: alpha-amirin, gallic acid, myricitrin, quercitrin, (-)-epigallocatechin and (-)-epigallocatechin-3-O-gallate. This study contributes to the knowledge of the secondary metabolites produced by one more species of the Brazilian Flora, until now not investigated. Moreover, this study allowed the identification of three substances with antioxidant activity previously detected in this species.

Resistência natural da madeira de Corymbia maculata (Hook.) K.D.Hill & L.A.S. Johnson a fungos e cupins xilófagos, em condições de laboratório

A pesquisa teve o objetivo de avaliar a resistência natural da madeira de Corymbia maculata a fungos e a cupins xilófagos, em condições de laboratório. De peças radiais (tábuas) que continham o cerne e o alburno intactos foram retirados corpos-de-prova de 2,00 x 2,00 x 1,00 cm, com a menor dimensão na direção tangencial (ensaio com fungos), e de 2,54 x 2,00 x 0,64 cm, com a maior dimensão na direção das fibras (ensaio com cupins), em quatro posições na direção medula-casca. As amostras foram submetidas à ação dos fungos Postia placenta, Neolentinus lepideus e Polyporus fumosus por 12 semanas, ou à ação de cupins do gênero Nasutitermes por 30 dias. Constatou-se que a resistência da madeira ao apodrecimento foi dependente da posição na direção medula-casca e dos fungos utilizados. As amostras retiradas nas posições mais externas do tronco foram mais deterioradas que as internas. Dentro de cada posição, os fungos causaram deterioração semelhante à madeira, exceto para a posição mais externa (alburno), em que o fungo P. fumosus causou menos deterioração que os demais. De modo geral, a madeira de C. maculata foi altamente resistente (posições internas) ou resistente (posições externas) aos fungos ensaiados. Somente para o fungo N. lepideus a posição mais externa foi moderadamente resistente. Quanto aos cupins, a resistência da madeira não foi afetada pela posição na direção medula-casca e apresentou uma baixa perda de massa para as posições analisadas. Além disto, os cupins causaram somente desgaste superficial à madeira, e morreram durante o ensaio, o que permitiu classificar a madeira de C.maculata como resistente aos cupins ensaiados.

Caracterização morfológica, viabilidade e vigor de sementes de Tabebuia aurea (Silva Manso) Benth. & Hook. f. ex. S. Moore

A espécie Tabebuia aurea é encontrada em áreas de Cerrado, Caatinga, Floresta Amazônica e Pantanal, sendo utilizada para fins ornamentais, medicinais, construção civil, carpintaria e produção de carvão, entre outros. Por apresentar ampla utilização e distribuição, os objetivos deste estudo foram caracterizar morfologicamente e analisar a viabilidade e o vigor das sementes dessa espécie quando colhidas e armazenadas por diferentes períodos. As sementes foram germinadas recém-colhidas, 30, 60 e 90 dias após o armazenamento em laboratório e em campo, sendo também submetidas ao teste de tetrazólio. As sementes mediram, em média, 57,8 x 20,6 x 3,1 mm (com alas) e 17,3 x 13,3 x 1,7 mm (sem alas), sendo assimétricas. Seu peso médio foi de 13,18 g (com alas) e 11,55 g (sem alas). As sementes apresentaram maior viabilidade quando recém-colhidas, maior porcentagem de germinação em laboratório após 30 dias de armazenamento e maior porcentagem de germinação acumulada a campo quando semeadas na superfície. A viabilidade das sementes, medida através do teste de tetrazólio, apresentou resultados similares aos obtidos por meio do teste de germinação em laboratório, indicando ser esse teste adequado para medir a viabilidade desta espécie.

Superação da dormência das sementes de Delonix regia (Bojer ex Hook.) Raf.

Delonix regia (flamboyant) é uma espécie arbórea amplamente utilizada no Brasil, de alto valor ornamental. Sua propagação ocorre por meio de sementes, que apresentam dormência pela impermeabilidade do tegumento à água. Com o objetivo de determinar a melhor metodologia para a superação da dormência, as sementes da espécie foram submetidas a diferentes tratamentos: 1) imersão em água fervente por 1 min; 2) imersão em água a 80 °C e a 90 °C por 1 e 3 min; 3) escarificação manual com lixa; e 4) imersão em ácido sulfúrico concentrado por 15, 30, 45 e 60 min, além da testemunha. Após cada tratamento, as sementes foram colocadas para germinar em rolo de papel, na temperatura de 25 ºC. Em uma segunda etapa, os tratamentos mais efetivos na quebra de dormência das sementes foram aplicados e a germinação, testada à temperatura de 30 °C. Em ambas as temperaturas, as contagens de germinação (plântulas normais) foram realizadas diariamente. O tratamento das sementes de flamboyant em água quente a 90 ºC por 1 min foi o mais eficiente na promoção da germinação, sendo prático e dispensando o uso de tratamentos químicos. O teste de germinação realizado à temperatura de 30 °C não forneceu resultados satisfatórios, com menores porcentagens de plântulas normais e IVG que os testes a 25 ºC. Foram descritas como plântulas normais as que possuíam visíveis dois cotilédones semiabertos, hipocótilo alongado, raiz primária bem desenvolvida e raízes adventícias curtas. Conclui-se que sementes de Delonix regia germinam melhor a 25 ºC após a imersão por 1 min em água a 90 ºC, sendo este indicado como tratamento para superação da dormência da espécie.

VALORES LIMÍTROFES PARA TRANSPIRAÇÃO, DESENVOLVIMENTO E CRESCIMENTO DE Corymbia citriodora (Hook.) K.D. Hill & L.A.S. Johnson EM RESPOSTA À DEFICIÊNCIA HÍDRICA NO SOLO1

RESUMO Quando a disponibilidade de água no solo é reduzida, as plantas respondem diminuindo a taxa de transpiração, o crescimento e o desenvolvimento, na tentativa de aclimatação à deficiência hídrica. Com o objetivo de quantificar essas respostas em mudas de Corymbia citriodora (Hook.) K.D. Hill & L.A.S. Johnson, foi utilizada a metodologia da fração de água transpirável no solo (FATS), em um experimento conduzido em casa de vegetação, sob o delineamento inteiramente casualizado, sendo dois níveis de suplementação hídrica, duas épocas de aplicação da deficiência hídrica e nove repetições. A FATS e os parâmetros de transpiração, crescimento e desenvolvimento foram medidos diariamente durante a aplicação da deficiência hídrica. A FATS crítica, em que a transpiração, o crescimento e desenvolvimento começam a ser reduzidos, foi distinta nas épocas de aplicação da deficiência hídrica devido à diferença das condições meteorológicas. Os valores elevados de FATS indicaram que a espécie possuiu boa aclimatação à deficiência hídrica no solo, quando comparada com as espécies anuais e outras perenes.

Citrus root distribution under water stress grown in sandy soil of central Florida

The experiment was conducted in an orchard located in University of Florida (Citrus Research and Education Center), Lake Alfred, Polk County, Florida, USA. The objective of this study was to evaluate the effects of water stress in root distribution of 'Valencia' orange tree on 'Swingle' citrumelo rootstock. Three treatments were imposed on the trees: 1) normal irrigation with microsprinklers, 2) no irrigation in winter (November through mid-March) and 3) rainfall exclusion by placing a water repelling fabric (Tyvek) under the trees. Trees in treatments 1 and 2 received normal rainfall during the winter, but treatment 3 received no rain. Normal irrigation was resumed on all treatments in mid March. Soil was collected using root auger head (0.09 m diameter and height 0.25 m) in two opposing quadrants (West and East at 3 horizontal distances from tree trunk (1, 2 and 3 m) and 4 depths (0.0-0.15; 0.15-0.30; 0.30-0.60 and 0.60-0.90 m). The results from root sampling showed that there was a significant difference in root distribution between irrigated treatment and non irrigated/non rainfall.

Distribution of water in sandy soil applied by drip

The search for the use of water with high levels of efficiency has motivated the use of drip irrigation in several agricultural systems. However, for the efficiency be ensured, it is necessary that the water distribution in the soil profile must to be known in more details. As it is a highly variable process, function of the local characteristics, is essential the study of each case. The objective of this research was evaluating the water distribution in the soil profile, from drippers installed in surface and 0.15 m below the soil surface. The experiment was realized in the Technical Center of Irrigation (TCI) of the State University of Maringá - PR. The water monitoring in the soil profile was done with TDR probes installed in a box containing sandy soil, at the depths from 0.05 to 0.80 m; and 0.05 to 0.35 m of lateral spacing, at intervals of 0.05 m, totalizing 30 probes. The treatments were differentiated in relation of the installation depth of the emitters (0.0 and 0.15 m) and flow (1, 2, 4, 6, and 8 L h-1). The irrigation time was 8 hours continuous with reading of the TDR probes each 30 minutes. The results allowed concluding that the wet area with the emitter positioned on the soil surface was directly proportional to the flow increase. For the underground dripper, this area was substantially smaller and the water losses by percolation were higher, mainly to the flows higher than 4 L h-1, which provided to unacceptable water losses that should be avoided.

Linfadenectomia no câncer gástrico com hook laparotômico

O câncer gástrico é uma neoplasia frequente e de tratamento cirúrgico. Gastrectomia com linfadenectomia D2 é o procedimento padrão com intuito curativo. Os autores relatam o uso do hook laparotômico como alternativa técnica para linfadenectomia.

Application of Sulfentrazone in Stages of Germination of IAC 90 Cassava Cuttings in Clay Soils and Sandy

Weeds interfere dramatically in the productive potential of cassava; however, information regarding herbicides that are selective to crops is still scarce. Thus, the aim in this study was to assess the initial growth of IAC 90 cassava plants after the application of sulfentrazone at different stages of germination of cassava in clayey and sandy soils. Three experiments were simultaneously deployed: the first experiment consisted in the application of sulfentrazone in the non-germinated stage of cassava cuttings; the second one in the stage of germinated cassavas cuttings (0.9 cm shoots); and the third one in applications in the stage of cassava cuttings with buds emerging (6.5 cm shoots and emerging from the soil). For each experiment the experimental design in randomized blocks was used in the 2 x 5 factorial arrangement with four replications. The factors were composed of two soils (sandy and clayey) and five doses of sulfentrazone (0, 250, 500, 750 and 1,000 g ha-1). It was found that depending on the herbicide dose, development stage of the buds of cassava cuttings and the type of soil, damage can occur in the initial development of the IAC 90 cassava plants. The greatest potential of sulfentrazone selectivity has occurred in applications in the non-germinated cassava cuttings stage and in doses lower than 500 g ha-1 in the clayey soil.

SULFENTRAZONE SELECTIVITY AND EFFICIENCY IN CASSAVA CROPS IN SANDY AND CLAYEY SOILS

ABSTRACT Weeds have the potential to dramatically interfere in cassava cultivation, reducing its productive potential; however, there are few studies on the selective herbicides in this crop. Therefore, the objective was to evaluate in this work the selectivity and efficiency of sulfentrazone in cassava crops grown in sandy and clayey soils. Two experiments were carried out: The first one was carried out in sandy soil conditions in the conventional system; and the second one was carried out in clayey soil conditions in the no-tillage system. The experimental design was a randomized block with four replications. The treatments consisted in doses of 250, 500, 750 and 1,000 g ha-1 of sulfentrazone, and weeded and non-weeded controls. Sulfentrazone application in cassava crops has linearly reduced the production of roots in a proportion of 0.0153 and 0.0107 t ha-1 at each increment in grams of the active ingredient, respectively. It was concluded that sulfentrazone was not selective for cassava crops grown both in sandy and in clayey soil; however, it was highly effective in weed control in both soils.

Light and storage on the germination of spores of Dicksonia sellowiana (Presl.) Hook., Dicksoniaceae

Spores of Dicksonia sellowiana are positively photoblastic and reach the maximum percentage of germination at 23 ± 2°C in white light after seven days of imbibition. The pre-induction phase for spores induced by white or red light for 24 hours was 72 hours. Gametophytes grown in white light were plane and bidimensional, while those grown under red light were filamentous. The higher the number of hours of light applied per day during 10 days, the higher the percentage of germination. Germination was higher for long white light treatments applied on a daily basis. The effect of different light intensities on germination was also investigated here. The lower percentages of germination were observed for spores kept under 43% and 2% of full sunlight, while those kept under 26, 19 and 4% presented higher percentages. Spores presented circa 82% of germination after 731 days of storage under refrigeration at aproximately 10°C.

Respuestas morfológicas y anatómicas de Tessaria absinthioides (Hook. et Arn.) DC. a la salinidad

T. absinthioides, Inuleae, Compositae, is a weedy species that is spreading in the irrigation area of the Colorado River, Argentina. This species can be found in normal and saline soils. Morphological and anatomical variables were measured with two salts, sodium chloride and sodium sulfate, with three levels of osmotic potential -0.4, -0.8 and -1.5 MPa, in hydroponic culture, using Hoagland solution as the cultivation media. The total diameter of the roots of plants growing in Na2SO4 and NaCl increased when the osmotic potential was -0.4 MPa. In plants growing in NaCl this may have resulted from the increase in the size of the cortical cells and in plants growing in Na2SO4, the diameter increased may be due to an increase in the cambial activity. The number and length of shoot internodes decreased with increasing salinity, even though this was not statistically significant. In comparison to the control, the total diameter of the shoot increased at -0.4 MPa and decreased with the reduction of the osmotic potential. In comparison to the control, the length of the leaves decreased at -0.4 MPa and the leaves width increased at the same concentration. The palisade parenchyma appeared less developed in saline conditions. In comparison to the control, the number of hairs increased at -0.4 MPa. T. absinthioides acts as a semihalophytic species, according to the salt ranks it tolerates. The mechanisms of adaptation to saline conditions are succulence in root and stunted growth if the salt in the media is NaCl, and the production of haloxeromorphic characters if the salt in the media is Na2 SO4