Keeping Research Data Safe 2 (KRDS2)

Data has always been fundamental to many areas of research but in recent years it has become central to more disciplines and inter-disciplinary projects and grown substantially in scale and complexity. There is increasing awareness of its strategic importance as a resource in addressing modern global challenges and the possibilities being unlocked by rapid technological advances and their application in research (NAS2009). The first Keeping Research Data Safe study funded by JISC made a major contribution to understanding of long-term preservation costs for research data by developing a cost model and identifying cost variables for preserving research data in UK universities (Beagrie et al, 2008). The Keeping Research Data Safe 2 (KRDS2) project has built on this work.

Looking for safe harbor in a crowded sea: Coastal space use conflict and marine renewable energy development

Technological advances in the marine renewable energy industry and increased clarity about the leasing and licensing process are fostering development proposals in both state and federal waters. The ocean is becoming more industrialized and competition among all marine space users is developing (Buck et al. 2004). More spatial competition can lead to conflict between ocean users themselves, and to tensions that spill over to include other stakeholders and the general public (McGrath 2004). Such conflict can wind up in litigation, which is costly and takes agency time and financial resources away from other priorities. As proposals for marine renewable energy developments are evaluated, too often decision-makers lack the tools and information to properly account for the cumulative effects and the tradeoffs associated with alternative human uses of the ocean. This paper highlights the nature of marine space conflicts associated with marine renewable energy literature highlights key issues for the growth of the marine renewable energy sector in the United States. (PDF contains 4 pages)

Safe use of pesticide in rice-fish culture

Results of the study on the relative safety of nine different pesticides: Diazinon 40% EC, Diazinon 10 G, Elsan 50% EC, Sumithion 50% EC, Furadan 3 G, Padan 50% SP, Kitazin 48% EC, Kitasin 17% G and EPN 45% EC for various fish species: Cyprinus carpio, Labeo rohita, Oreochromis mossambicus, Channa punctata, Clarias batrachus and Anabas testudineus used in rice-fish culture are presented and discussed.

Improving aquaculture feed in Bangladesh: From feed ingredients to farmer profit to safe consumption

Use of manufactured feeds in aquaculture in Bangladesh has grown rapidly over the last five years. More than 1 million tonnes of commercially formulated feeds and 0.3-0.4 million tonnes of farm-made feeds were produced in 2012, and sectoral growth is projected to increase substantially over the medium term. This working paper summarizes findings from a study, conducted as part of the WorldFish/USAID “Feed the Future-Aquaculture” project in 2012, assessing the current status of the aquaculture feed sector in Bangladesh. Fish feed value chains, market trends, ingredients and formulation systems, farm feeding practices, ancillary services and feed regulations were investigated. The study identifies a number of entry points for interventions in the sector, and investments which would improve feed quality and farmer access to better feeds and support the growth of sustainable aquaculture.

Improved handling and preservation of freshwater giant prawn, Macrobrachium rosenbergii for producing safe and wholesome products

Studies were undertaken to evaluate the quality changes in freshwater giant prawn, Macrobrachium rosenbergii during various storage conditions of handling and preservation and producing safe and quality products. The samples kept in ice immediately after catch with head-on and head-less condition were found to be acceptable for 6 days and 7 days, respectively. Delaying of icing considerably shortened the shelf-life. The pH value increased from 6.36 to 8.0 after 10 days in ice. The initial average TVB-N value of sample increased from below 10 mg/100 g to 25 mg/100 g with the lapse of storage period. The Ca++ ATPase activity in presence of 0.1M KCl slightly decreased at the end of 10 days of ice storage. Immediately after harvest, initial aerobic plate count (APC) was 2.88x10^6 CFU/g which gradually increased to 1.12x10^8 CFU/g after 6 days in ice storage and showed early signs of spoilage. Initial bacterial genera in the prawn iced at 0 hours were comprised of Coryneform (22.21 %), Bacillus (7.40%), Micrococcus (11.11 %), Achromobacter (48.14%), Flavobacterium/Cytophaga (7.40%), Pseudomonas (3.70%) and Aeromonas (3.70%). During ice storage Coryneforms and Bacillus were always dominating along with less prominent ones - Micrococcus, Achromobacter and Flavobacterium. Studies were conducted on the stability of myofibrillar protein of M. rosenbergii under different storage and pH conditions. The influence of a wide range of pH on the remaining Ca++ ATPase activity of M. rosenbergii muscle myofibrils after storage at -20°C for 2 days, at 0°C for 2 days and at 35°C for 30 minutes demonstrated that ATPase activities were lower in acidic and alkaline pH regions and the activity remained relatively high. Mg++ ATPase activities both in presence and absence of Ca++ remained high at neutral pH compared to those of acidic and alkaline region. The solubility of myofibrillar protein decreased gradually both in acidic and alkaline pH regions. The study also examined the bacteriological quality of freshly harvested M. rosenbergii, pond sediment and pond water from four commercial freshwater prawn farms at Fulpur and Tarakanda upazilas in the district of Mymensingh. The study included aerobic plate count (APC), total coliform count, detection, isolation and identification of suspected public health hazard bacteria and their seasonal variation, salt tolerance test, antibiotic sensitivity test of the isolates and washing effect of chlorinated water on the bacterial load in the prawn samples. APC in sediment soil and water of the farm and gill and hepatopancreas of freshly harvested prawns varied considerably among the farms and between summer and winter season. The range of coliform count in water, gill and hepatopancreas ranged between 6 - 2.8x10^2 CFU/ml, 1.2x10^2 - 3.32x10^2 CFU/g and 1.43x10^2 - 3.89 x10^3 CFU/g, respectively. No coliform was detected in pond sediment sample. Suspected health hazard bacteria isolated and identified from pond sediment, water, gill and hepatopancreas included Streptococcus, Bacillus, Escherichia coli, Klebsialla, Salmonella, Staphylococcus, Pseudomonas and Aeromonas. Bacillus, Salmonella and Staphyloccus [sic], and were found to be highly salt tolerant and capable of growing at 10% NaCl. The antibiotic discs with different concentration of antibiotics were used for the sensitivity test. The organisms were found to be most sensitive against Tetracyclin and Gentamycin.

Guidewire retention following central venous catheterisation: a human factors and safe design investigation.

BACKGROUND: Central Venous Catheterisation (CVC) has occasionally been associated with cases of retained guidewires in patients after surgery. In theory, this is a completely avoidable complication; however, as with any human procedure, operator error leading to guidewires being occasionally retained cannot be fully eliminated. OBJECTIVE: The work described here investigated the issue in an attempt to better understand it both from an operator and a systems perspective, and to ultimately recommend appropriate safe design solutions that reduce guidewire retention errors. METHODS: Nine distinct methods were used: observations of the procedure, a literature review, interviewing CVC end-users, task analysis construction, CVC procedural audits, two human reliability assessments, usability heuristics and a comprehensive solution survey with CVC end-users. RESULTS: The three solutions that operators rated most highly, in terms of both practicality and effectiveness, were: making trainees better aware of the potential guidewire complications and strongly emphasising guidewire removal in CVC training, actively checking that the guidewire is present in the waste tray for disposal, and standardising purchase of central line sets so that differences that may affect chances of guidewire loss is minimised. CONCLUSIONS: Further work to eliminate/engineer out the possibility of guidewires being retained is proposed.

Formal specification and refinement of a safe train control function

Motivated by the design and development challenges of the BART case study, an approach for developing and analyzing a formal model for reactive systems is presented. The approach makes use of a domain specific language for specifying control algorithms able to satisfy competing properties such as safety and optimality. The domain language, called SPC, offers several key abstractions such as the state, the profile, and the constraint to facilitate problem specification. Using a high-level program transformation system such as HATS being developed at the University of Nebraska at Omaha, specifications in this modelling language can be transformed to ML code. The resulting executable specification can be further refined by applying generic transformations to the abstractions provided by the domain language. Problem dependent transformations utilizing the domain specific knowledge and properties may also be applied. The result is a significantly more efficient implementation which can be used for simulation and gaining deeper insight into design decisions and various control policies. The correctness of transformations can be established using a rewrite-rule based induction theorem prover Rewrite Rule Laboratory developed at the University of New Mexico.

Eye-safe, high-energy, single-mode all-fiber laser with widely tunable repetition rate

We present a novel high-energy, single-mode, all-fiber-based master-oscillator-power-amplifier (MOPA) laser system operating in the C-band with 3.3-ns pulses and a very widely tunable repetition rate, ranging from 30 kHz to 50 MHz. The laser with a maximum pulse energy of 25 mu J and a repetition rate of 30 kHz is obtained at, a wavelength of 1548 nm by using a double-clad, single-mode, Er:Yb co-doped fiber power amplifier.