Influence of grease rheology on thrust ball bearings friction torque

The friction torque and the operating temperatures in a thrust ball bearing were measured for seven different types of greases, including three biodegradable greases having low toxicity. These friction torque tests were performed using a modified Four-Ball machine. Rheological evaluations of the lubricating greases were made using a rheometer. Bleed oils were extracted from the greases and the dynamic viscosities were measured. In order to compare the performance of the lubricant greases in terms of friction, the grease characteristics were related to experimental results, showing that the interaction between thickener and base oil have strong influences in the bearing friction torque.

Experimental measuring procedure for the friction torque in rolling bearings

The reduction of the power loss generated in mechanical transmissions and the use of low friction biodegradable lubricants has been attracting considerable attention in recent times. Therefore, it is necessary to develop methods to test and evaluate the performance of such lubricants and compare them with conventional ones. In this sense, a Four-Ball Machine was modified allowing the test of rolling bearings. A 51107 thrust ball bearing was used to test two different greases and the corresponding base oils. Friction torque and operating temperatures were continuously monitored to quantify the power loss and the heat evacuation for each lubricant tested. Copyright © 2010 John Wiley & Sons, Ltd.

Friction and wear in thrust ball bearings lubricated with biodegradable greases

Thrust ball bearings lubricated with several different types of grease, including three biodegradable low-toxicity greases, were tested in a modified four-ball machine in order to evaluate the bearing friction torque. At the end of each test, grease samples were obtained and analysed through ferrography, allowing the quantification and evaluation of the bearing wear. In order to compare the grease performance in terms of friction and wear, a correlation between the grease characteristics (base oil, bleed oil, thickener structure, and rheological parameters) and the experimental results was established.

Friction torque in grease lubricated thrust ball bearings

Thrust ball bearings lubricated with several different greases were tested on a modified Four-Ball Machine, where the Four-Ball arrangement was replaced by a bearing assembly. The friction torque and operating temperatures in a thrust ball bearing were measured during the tests. At the end of each test a grease sample was analyzed through ferrographic techniques in order to quantify and evaluate bearing wear. A rolling bearing friction torque model was used and the coefficient of friction in full film lubrication was determined for each grease, depending on the operating conditions. The experimental results obtained showed that grease formulation had a very significant influence on friction torque and operating temperature. The friction torque depends on the viscosity of the grease base oil, on its nature (mineral, ester, PAO, etc.), on the coefficient of friction in full film conditions, but also on the interaction between grease thickener and base oil, which affected contact replenishment and contact starvation, and thus influenced the friction torque.

Influence of grease formulation on thrust bearings power loss

The minimization of the power loss and the use of the biodegradable greases have attracting considerable attention. To compare the energetic performance of biodegradable lubricant greases, power loss tests were performed on a modified four-ball machine. A correlation between the grease formulation and rheology was established with its energetic performance

Rapid [Gamma]-amino acid synthesis and the inhibition of the growth and development of oblique banded leaf-roller larvae

The hypothesis that rapid y-aminobutyric acid (GABA) accumulation is a plant defense against phytophagous insects was investigated. Simulation of mechanical damage resulting from phytophagous insect activity increased soybean (Glycine max L.) leaf GABA 10- to 25-fold within 1 to 4 min. Pulverizing leaf tissue resulted in a value of 2. 15 (±O. 11 SE) ~mol GABA per gram fresh weight. Increasing the GABA levels in a synthetic diet from 1.6 to 2.6 Jlffiol GABA per gram fresh weight reduced the growth rates, developmental rates, total biomass (50% reduction), and survival rates (30% reduction) of cultured Oblique banded leaf-roller (OBLR) (Choristonellra rosacealla Harris) larvae. In field experiments OBLR larvae were found predominantly on young terminal leaves which have a reduced capacity to produce GABA in response to mechanical damage. Glutamate decarboxylase (GAD) is a cytosolic enzyme which catalyses the decarboxylation of L-Glu to GABA. GAD is a calmodulin binding enzyme whose activity is stimulated dramatically by increased cytosolic H+ or Ca2 + ion concentrations. Phytophagous insect activity will disrupt the cellular compartmentation of H+ and Ca2 +, activate GAD and subsequent GABA accumulation. In animals GABA is a major inhibitory neurotransmitter. The possible mechanisms resulting in GABA inhibited growth and development of insects are discussed.

Roller Toaster Food Truck

Creación y desarrollo de un restaurante móvil "Food Truck Roller Toaster" el cual produce y comercializa Sándwiches y Ensaladas Gourmet bajo el concepto de lo Tostado. Durante la Tesis se tratan temas de desarrollo de marca, diseño de producto, estudios de mercado, entre otros.

Specialpedagogers och speciallärares olika roller och uppdrag : skilda föreställningar möts och möter en pedagogisk praktik

Syftet med artikeln är att belysa olika föreställningar kring specialpedagogers och speciallärares roller och uppdrag samt att förstå varför denna olikhet finns. Syftet är också att problematisera  dessa föreställningar  och synliggöra dilemman som kommer till uttryck i talet om de båda yrkesgruppernas roller och uppdrag.  Bakgrunden till studien är de skilda och ofta disparata uppfattningar som råder om vad yrkesgrupperna ska arbeta med, hur de ska genomföra sina uppdrag och varför. Konsekvenserna av detta kan leda till att uppdrag genomförs på ett sätt som inte står i överensstämmelse med styrdokumentens föreskrivna demokrati-, samhälls- och kunskapsuppdrag. Samtal har genomförts med specialpedagoger, speciallärare utbildade efter 2008 och rektorer. Den metodologiska ansatsen har varit kunskapande samtal. Kunskapande samtal utgår från ett kommunikationsteoretiskt perspektiv och bygger på Jürgen Habermas teori om det kommunikativa handlandet. Karen Barads teori om agentisk realism har använts för att förstå hur olika föreställningar kring roller och uppdrag uppstår, skapas och förändras i samspel med andras uppfattningar men även i samspel med exempelvis rum, texter och metoder. Olika föreställningar om roller och uppdrag belyses liksom dilemman som dessa föreställningar kan ge upphov till då yrkesrollerna möts i, och möter, en pedagogisk praktik. Resultatet visar att specialpedagoger och speciallärare behöver finnas med i det kontinuerliga arbetet ute på skolor och förskolor men att det kan betyda olika slags organisatoriska lösningar för yrkesgrupperna. En fråga som uppstår är om de specialpedagogiska yrkesgrupperna alltid och i alla sammanhang bör finns så nära barnen/eleverna som möjligt eller om det finns grund för ett mer distanserat sätt att arbeta? Författaren föreslår att svensk förskola och skola bör utnyttja det faktum att det finns två olika specialpedagogiska yrkesgrupper och särskilja deras roller och uppdrag på ett tydligt sätt. Om specialpedagogik dessutom tar avstamp i ett kommunikationsteoretiskt perspektiv skapas förutsättningar och möjligheter för barns/elevers lärande utifrån ett inkluderande synsätt.

Comments on Magnetically levitated micro PM motors by two types of active magnetic bearings

This note clarifies the design of proportional derivative (PD) controllers for the magnetic levitation systems of micro PM motors proposed in the above paper. It is shown that the PD controllers cannot stabilize the described levited micro motors because it is necessary to use other values of parameters for these controllers. We present necessary and sufficient conditions for the stability of the controlled systems described in the paper.

Linear parameter varying control design for rotating systems supported by journal bearings

Linear parameter varying (LPV) control is a model-based control technique that takes into account time-varying parameters of the plant. In the case of rotating systems supported by lubricated bearings, the dynamic characteristics of the bearings change in time as a function of the rotating speed. Hence, LPV control can tackle the problem of run-up and run-down operational conditions when dynamic characteristics of the rotating system change significantly in time due to the bearings and high vibration levels occur. In this work, the LPV control design for a flexible shaft supported by plain journal bearings is presented. The model used in the LPV control design is updated from unbalance response experimental results and dynamic coefficients for the entire range of rotating speeds are obtained by numerical optimization. Experimental implementation of the designed LPV control resulted in strong reduction of vibration amplitudes when crossing the critical speed, without affecting system behavior in sub- or supercritical speeds. (C) 2012 Elsevier Ltd. All rights reserved.

Roller, Brustbild

Signatur des Originals: S 36/F06037

Full-Wafer Roller-NIL Processes for Silicon Solar Cell Texturisation

The highest solar cell efficiencies both for c-Si and mc-Si were reached using template based texturing processes. Especially for mc-Si the benefit of a defined texture, the so called honeycomb texture, was demonstrated impressively. However, up until now, no industrially feasible process has been available to pattern the necessary etching masks with the sufficient resolution. Roller-Nanoimprint Lithography (Roller-NIL) has the potential to overcome these limitations and to allow high quality pattern transfers, even in the sub-micron regime, in continuous in-line processes. Therefore, this etch-mask patterning technique is a suitable solution to bring such elaborate features like the honeycomb texture to an industrial realization. Beyond that, this fast printing-like technology opens up new possibilities to introduce promising concepts like photonic structures into solar cells.