Water reuse for irrigated agriculture in Jordan: challenges of soil sustainability and the role of management strategies

Reclaimed water provides an important contribution to the water balance in water-scarce Jordan, but the quality of this water presents both benefits and challenges. Careful management of reclaimed water is required to maximize the nutrient benefits while minimizing the salinity risks. This work uses a multi-disciplinary research approach to show that soil response to irrigation with reclaimed water is a function of the management strategies adopted on the farm by the water user. The adoption of management methods to maintain soil productivity can be seen to be a result of farmers’ awareness to potentially plant-toxic ions in the irrigation water (70% of Jordan Valley farmers identified salinization as a hazard from irrigation with reclaimed water). However, the work also suggests that farmers’ management capacity is affected by the institutional management of water. About a third (35%) of farmers in the Jordan Valley claimed that their ability to manage salinization was limited by water shortages. Organizational interviews revealed that institutional awareness of soil management challenges was quite high (34% of interviewees described salinization as a risk from water reuse), but strategies to address this challenge at the institutional level require greater development.

Water reuse for irrigation in Jordan: perceptions of water quality among farmers

The reuse of treated wastewater (reclaimed water) for irrigation is a valuable strategy to maximise available water resources, but the often marginal quality of the water can present agricultural challenges. Semi-structured interviews were held with Jordanian farmers to explore how they perceive the quality of reclaimed water. Of the 11 farmers interviewed who irrigate with reclaimed water directly near treatment plants, 10 described reclaimed water either positively or neutrally. In contrast, 27 of the 39 farmers who use reclaimed water indirectly, after it is blended with fresh water, viewed the resource negatively, although 23 of the indirect reuse farmers also recognised the nutrient benefits. Farmer perception of reclaimed water may be a function of its quality, but consideration should also be given to farmers’ capacity to manage the agricultural challenges associated with reclaimed water (salinity, irrigation system damage, marketing of produce), their actual and perceived capacity to control where and when reclaimed water is used, and their capacity to influence the quality of the water delivered to the farm.

Water reuse for irrigation in Jordan: plant beneficial nutrients, farmers’ awareness and management strategies

The reuse of treated wastewater (reclaimed water) is particularly well suited for irrigated agriculture as it often contains significant quantities of plant essential nutrients. This work has shown that reclaimed water in Jordan can have adequate concentrations of potassium, phosphate, sulphate and magnesium to meet all or part of the crop’s requirements. To fully benefit from these inputs farmers must have an awareness of the water quality and reduce the application of chemical fertilisers accordingly. Interviews with farmers have shown that 75 per cent of farmers indirectly using reclaimed water are aware of the nutrients. Farmers’ decision making as to the application of chemical fertilisers appears to be influenced by a range of factors which include the type of crops being cultivated, the provision of training on nutrient management and the availability of information on the nutrient content of the reclaimed water.

Planning for the reuse of redundant defence estate: disposal processes, policy frameworks and development impacts

This paper reviews recent research and other literature concerning the planning and development of redundant defence estate. It concentrates on UK sources but includes reference to material from Europe and the North America were it is relevant for comparative purposes. It introduces the topic by providing a brief review of the recent restructuring of the UK defence estate and then proceeds to examine the various planning policy issues generated by this process; the policy frameworks used to guide it; comparable approaches to surplus land disposal and the appraisal of impacts; and ending the main body of the review with an analyse of the economic, social and environmental impacts of military base closure and redevelopment. It concludes that there is a significant body of work focusing on the reuse and redevelopment of redundant defence estate in the UK and abroad, but that much of this work is based on limited research or on personal experience. One particular weakness of the current literature is that it does not fully reflect the institutional difficulties posed by the disposal process and the day-to-day pressures which MOD personnel have to deal with. In doing this, it also under-emphasises the embedded cultures of individuals and professional groups who are required to operationalise the policies, procedures and practices for planning and redeveloping redundant defence estate.

Towards effective water reuse: drivers, challenges and strategies shaping the organisational management of reclaimed water in Jordan

Treated wastewater or reclaimed water is gaining recognition as a valuable water resource around the world. To assess why, where and how water reuse takes place in Jordan, semi-structured interviews were conducted with representatives of 29 key organisations in 2008. The analysis reveals that water scarcity is a key driver for water reuse. However, despite such recognition, reuse was described positively by only a small proportion of the interviewees (n = 6). Negative and neutral perceptions regarding reuse dominated and the research found that this was related to two underlying challenges: (i) the requirement for more intensive management when using reclaimed water compared with freshwater and (ii) concern over societal acceptance of water reuse. These factors were found to be associated with the risks posed to humans and their environments, combined with negative emotional and cultural responses to human waste and its applications. Numerous strategies are identified that are employed by organisations to overcome these challenges. Wastewater treatment, regulation, monitoring, the mixing of treated effluent with freshwater and limited public discussion of water reuse are all employed to achieve maximum use of reclaimed water. Each strategy presents benefits of sort, but some may paradoxically also inhibit optimal use of reclaimed water. Careful modifications to the existing strategies of Jordanian agencies, such as more open discussion of reuse, could lead to greater social, economic and environmental gains.

Enabling sharing and reuse of scientific data

The purpose of this study was to develop an understanding of the current state of scientific data sharing that stakeholders could use to develop and implement effective data sharing strategies and policies. The study developed a conceptual model to describe the process of data sharing, and the drivers, barriers, and enablers that determine stakeholder engagement. The conceptual model was used as a framework to structure discussions and interviews with key members of all stakeholder groups. Analysis of data obtained from interviewees identified a number of themes that highlight key requirements for the development of a mature data sharing culture.

Sanitation assessment of wastewater treated by stabilization ponds for potential reuse in agricultural irrigation sanitation assessment

Wastewater reuse has become an important alternative to agricultural irrigation; on the other hand, it poses concern with regard to public health. Total coliform and Escherichia coli concentration, presence of helminth eggs and Salmonella, and physical-chemical parameters were evaluated in raw and treated wastewater. Chemical and biochemical oxygen demand removal efficiency was 74.6 and 77.9%, respectively. As for organic nitrogen, total phosphorus, and total suspended solids, total efficiency removal was 17.4, 12.5, and 32.9%, respectively. The average density of total coliforms and E. coli was 3.5 x 10(9) and 1.8 x 10(8) MPN/100 mL and 1.1 x 10(7) MPN/100 mL and 3.9 x 10(5) MPN/100 mL for raw and treated wastewater, respectively. Ascaris eggs were observed in 80.8% of the samples collected, and viable eggs in 42.3% of the samples. Salmonella was detected in 36.4% of the samples. The values observed in treated wastewater did not show the adequate bacteriological quality, as recommended by World Health Organization (Geneva, Switzerland). Therefore, additional measures should be taken to achieve an improved microbiological and parasitological quality.

Software reuse: The Brazilian industry scenario

This paper aims at identifying some of the key factors in adopting an organization-wide software reuse program. The factors are derived from practical experience reported by industry professionals, through a survey involving 57 Brazilian small, medium and large software organizations. Some of them produce software with commonality between applications, and have mature processes, while others successfully achieved reuse through isolated, ad hoe efforts. The paper compiles the answers from the survey participants, showing which factors were more associated with reuse success. Based on this relationship, a guide is presented, pointing out which factors should be more strongly considered by small, medium and large organizations attempting to establish a reuse program. (C) 2007 Elsevier Inc. All rights reserved.

Recycling workflows and services through discovery and reuse

Scientific workflows are becoming a valuable tool for scientists to capture and automate e-Science procedures. Their success brings the opportunity to publish, share, reuse and repurpose this explicitly captured knowledge. Within the myGrid project, we have identified key resources that can be shared including complete workflows, fragments of workflows and constituent services. We have examined the alternative ways these can be described by their authors (and subsequent users), and developed a unified descriptive model to support their later discovery. By basing this model on existing standards, we have been able to extend existing Web Service and Semantic Web Service infrastructure whilst still supporting the specific needs of the e-Scientist. myGrid components enable a workflow life-cycle that extends beyond execution, to include discovery of previous relevant designs, reuse of those designs, and subsequent publication. Experience with example groups of scientists indicates that this cycle is valuable. The growing number of workflows and services mean more work is needed to support the user in effective ranking of search results, and to support the repurposing process.

APSEE-Reuse : um meta-modelo para apoiar a reutilização de processos de software

Dentre as principais áreas que constituem a Ciência da Computação, uma das que mais influenciam o mundo atual é a Engenharia de Software, envolvida nos aspectos tecnológicos e gerenciais do processo de desenvolvimento de software. Software tornou-se a base de sustentação de inúmeras organizações dos mais diversos ramos de atuação espalhados pelo planeta, consistindo de um elemento estratégico na diferenciação de produtos e serviços atuais. Atualmente, o software está embutido em sistemas relacionados a infindável lista de diferentes ciências e tecnologias. A Tecnologia de Processo de Software surgiu em meados da década de 1980 e representou um importante passo em direção à melhoria da qualidade de software através de mecanismos que proporcionam o gerenciamento automatizado do desenvolvimento de software. Diversas teorias, conceitos, formalismos, metodologias e ferramentas surgiram nesse contexto, enfatizando a descrição formal do modelo de processo de software, para que possa ser automatizado por um ambiente integrado de desenvolvimento de software. Os modelos de processos de software descrevem o conhecimento de uma organização e, portanto, modelos que descrevem experiências bem sucedidas devem ser continuamente disseminados para reutilização em diferentes projetos. Apesar da importância desse tópico, atualmente apenas uma pequena porção do conhecimento produzido durante o desenvolvimento de software é mantido para ser reutilizado em novos projetos. Embora, à primeira vista, o desafio de descrever modelos reutilizáveis para processos de software pareça ser equivalente ao problema tratado pela tradicional área de reutilização de produtos software, isso é apenas parcialmente verdade, visto que os processos envolvem elementos relacionados com aspectos sociais, organizacionais, tecnológicos e ambientais. A crescente complexidade da atual modelagem de processos vem influenciando a investigação de tecnologias de reutilização que sejam viáveis nesse campo específico. A investigação conduzida nesse trabalho culminou na especificação de um meta-modelo que tem como objetivo principal aumentar o nível de automação fornecido na reutilização de processos, apoiando a modelagem de processos abstratos que possam ser reutilizados em diferentes contextos. O meta-modelo proposto por esse trabalho - denominado APSEE-Reuse - fornece uma série de construtores sintáticos que permitem que os diferentes aspectos desse contexto sejam descritos segundo múltiplas perspectivas, complementares entre si, contribuindo para diminuir a complexidade do modelo geral. A solução proposta destaca-se por fornecer um formalismo para modelagem de processos, o qual é integrado à uma infraestrutura de automação de processos de software, permitindo que a reutilização esteja intimamente relacionada com as outras etapas do ciclo de vida de processos. Os diferentes componentes envolvidos na definição do modelo APSEE-Reuse proposto foram especificados algebricamente, constituindo uma base semântica de alto 15 nível de abstração que deu origem a um conjunto de protótipos implementados no ambiente PROSOFT-Java. O texto ainda discute os experimentos realizados com o meta-modelo proposto na especificação de diferentes estudos de casos desenvolvidos a partir de exemplos retirados na literatura especializada, e de processos que fornecem soluções em contextos e necessidades específicas de projetos desenvolvidos no PPGC-UFRGS. Finalmente, são apresentadas considerações acerca dos trabalhos relacionados, os elementos críticos que influenciam a aplicabilidade do modelo e as atividades adicionais vislumbradas a partir do trabalho proposto.

Reuse-based test planning for core-based systems-on-chip

Electronic applications are currently developed under the reuse-based paradigm. This design methodology presents several advantages for the reduction of the design complexity, but brings new challenges for the test of the final circuit. The access to embedded cores, the integration of several test methods, and the optimization of the several cost factors are just a few of the several problems that need to be tackled during test planning. Within this context, this thesis proposes two test planning approaches that aim at reducing the test costs of a core-based system by means of hardware reuse and integration of the test planning into the design flow. The first approach considers systems whose cores are connected directly or through a functional bus. The test planning method consists of a comprehensive model that includes the definition of a multi-mode access mechanism inside the chip and a search algorithm for the exploration of the design space. The access mechanism model considers the reuse of functional connections as well as partial test buses, cores transparency, and other bypass modes. The test schedule is defined in conjunction with the access mechanism so that good trade-offs among the costs of pins, area, and test time can be sought. Furthermore, system power constraints are also considered. This expansion of concerns makes it possible an efficient, yet fine-grained search, in the huge design space of a reuse-based environment. Experimental results clearly show the variety of trade-offs that can be explored using the proposed model, and its effectiveness on optimizing the system test plan. Networks-on-chip are likely to become the main communication platform of systemson- chip. Thus, the second approach presented in this work proposes the reuse of the on-chip network for the test of the cores embedded into the systems that use this communication platform. A power-aware test scheduling algorithm aiming at exploiting the network characteristics to minimize the system test time is presented. The reuse strategy is evaluated considering a number of system configurations, such as different positions of the cores in the network, power consumption constraints and number of interfaces with the tester. Experimental results show that the parallelization capability of the network can be exploited to reduce the system test time, whereas area and pin overhead are strongly minimized. In this manuscript, the main problems of the test of core-based systems are firstly identified and the current solutions are discussed. The problems being tackled by this thesis are then listed and the test planning approaches are detailed. Both test planning techniques are validated for the recently released ITC’02 SoC Test Benchmarks, and further compared to other test planning methods of the literature. This comparison confirms the efficiency of the proposed methods.