The determination of three selected sites for the construction and operation of a low level radioactive waste storage and burial facility

Radioactive wastes are by-products of the use of radiation technologies. As with many technologies, the wastes are required to be disposed of in a safe manner so as to minimise risk to human health. This study examines the requirements for a hypothetical repository and develops techniques for decision making to permit the establishment of a shallow ground burial facility to receive an inventory of low-level radioactive wastes. Australia’s overall inventory is used as an example. Essential and desirable siting criteria are developed and applied to Australia's Northern Territory resulting in the selection of three candidate sites for laboratory investigations into soil behaviour. The essential quantifiable factors which govern radionuclide migration and ultimately influence radiation doses following facility closure are reviewed. Simplified batch and column procedures were developed to enable laboratory determination of distribution and retardation coefficient values for use in one-dimensional advection-dispersion transport equations. Batch and column experiments were conducted with Australian soils sampled from the three identified candidate sites using a radionuclide representative of the current national low-level radioactive waste inventory. The experimental results are discussed and site soil performance compared. The experimental results are subsequently used to compare the relative radiation health risks between each of the three sites investigated. A recommendation is made as to the preferred site to construct an engineered near-surface burial facility to receive the Australian low-level radioactive waste inventory.

Operation and control of a DVR in the presence of interharmonics

The paper discusses the operating principles and control characteristics of a dynamic voltage restorer (DVR). It is assumed that the source voltages contain interharmonic components in addition to fundamental components. The main aim of the DVR is to produce a set of clean balanced sinusoidal voltages across the load terminals irrespective of unbalance, distortion and voltage sag/swell in the supply voltage. An algorithm has been discussed for extracting fundamental phasor sequence components from the samples of three-phase voltages or current waveforms having integer harmonics and interharmonics. The DVR operation based on extracted components is demonstrated. The switching signal is generated using a deadbeat controller. It has been shown that the DVR is able to compensate these interharmonic components such that the load voltages are perfectly regulated. The DVR operation under deep voltage sag is also discussed. The proposed DVR operation is verified through the computer simulation studies using the MATLAB software package.

A fiber Bragg grating sensor system for train axle counting

Railway signaling facilitates two main functions, namely, train detection and train control, in order to maintain safe separations among the trains. Track circuits are the most commonly used train detection means with the simple open/close circuit principles; and subsequent adoption of axle counters further allows the detection of trains under adverse track conditions. However, with electrification and power electronics traction drive systems, aggravated by the electromagnetic interference in the vicinity of the signaling system, railway engineers often find unstable or even faulty operations of track circuits and axle counting systems, which inevitably jeopardizes the safe operation of trains. A new means of train detection, which is completely free from electromagnetic interference, is therefore required for the modern railway signaling system. This paper presents a novel optical fiber sensor signaling system. The sensor operation, field setup, axle detection solution set, and test results of an installation in a trial system on a busy suburban railway line are given.

Coasting control of train operation by genetic algorithm

Balancing between the provision of high quality of service and running within a tight budget is one of the biggest challenges for most metro railway operators around the world. Conventionally, one possible approach for the operator to adjust the time schedule is to alter the stop time at stations, if other system constraints, such as traction equipment characteristic, are not taken into account. Yet it is not an effective, flexible and economical method because the run-time of a train simply cannot be extended without limitation, and a balance between run-time and energy consumption has to be maintained. Modification or installation of a new signalling system not only increases the capital cost, but also affects the normal train service. Therefore, in order to procure a more effective, flexible and economical means to improve the quality of service, optimisation of train performance by coasting point identification has become more attractive and popular. However, identifying the necessary starting points for coasting under the constraints of current service conditions is no simple task because train movement is attributed by a large number of factors, most of which are non-linear and inter-dependent. This paper presents an application of genetic algorithms (GA) to search for the appropriate coasting points and investigates the possible improvement on computation time and fitness of genes.

Advances in vegetation management for power line corridor monitoring using aerial remote sensing techniques

This paper presents a comprehensive discussion of vegetation management approaches in power line corridors based on aerial remote sensing techniques. We address three issues 1) strategies for risk management in power line corridors, 2) selection of suitable platforms and sensor suite for data collection and 3) the progress in automated data processing techniques for vegetation management. We present initial results from a series of experiments and, challenges and lessons learnt from our project.

Life on the edge : housing experiences in three remote Australian indigenous settlements

This analysis of housing experiences and aspirations in three remote Indigenous settlements in Australia (Mimili, Maningrida and Palm Island) reveals extreme liveability problems directly related to the scale and form of housing provision. Based upon field visits to each of the settlements and extensive interviews with residents and local housing and community officers, the paper analyses two aspects of living in such housing conditions at two spatial scales, the layout of the settlement and the design of individual houses. The failings at both scales are shown to be the fault of a dysfunctional housing system that is only recently been addressed.

Operation and control of hybrid microgrid with angle droop controller

This paper compares the performance of two droop control schemes in a hybrid microgrid. With presence of both converter interfaced and inertial sources, the droop controller share power in a decentralized fashion. Both the droop controllers facilitate reactive power sharing based on voltage droop. However in frequency droop control, the real power sharing depends on the frequency, while in angle droop control, it depends on output voltage angle. For converter interfaced sources this reference voltage is tracked while for inertial DG, reference power for the prime mover is calculated from the reference angle with the proposed angle control scheme. This coordinated control scheme shows significant improvement in system performance. The comparison with the conventional frequency droop shows that the angle control scheme shares power with much lower frequency deviation. This is a significant improvement particularly in a frequent load changing scenario.

Directional earth fault relay operation in mutually coupled multiple circuit distribution lines

Many of the power utilities around the world experienced spurious tripping of directional earth fault relays in their mesh distribution networks due to induced circulating currents. This circulating current is zero sequence and induced in the healthy circuit due to the zero sequence current flow resulting from a ground fault of a parallel circuit. This paper quantitatively discusses the effects of mutual coupling on earth fault protection of distribution systems. An actual spurious tripping event is analyzed to support the theory and to present options for improved resilience to spurious tripping.

Finding the remote: Immersive learning in an outback community

Real-world design education projects present particular challenges when in a place remote from and distinctively different to students’ familiar territory. The teaching challenge is to assist students to translate the skills they learn at university into an entirely new context, facilitating a project they will learn from, and the community will value. In 2008 QUT design and engineering students undertook a project called Linking Karumba for this remote Queensland town. They engaged with a landscape, climate and community dramatically different from their base in urban Brisbane, and in a fortnight produced locally responsive strategic planning options. The theoretical approach to this was twofold: they needed to make a rapid shift along a continuum from being “outsiders” towards becoming “insiders” (Relph 1976), and to create designs responsive to local distinctiveness (Cumberlidge and Musgrave 2007). This paper outlines Linking Karumba’s teaching strategy via an analogy with the “immersion” method in bilingual education. Three teaching methods were adopted. Firstly, the overall framework drew on Brockbank and McGill (1998), and Thomas’ (2006a) approaches to student reflective practice. Within this, Girot’s “Four Trace Concepts” (1999) inspired exercises for finding Karumba and moving toward insideness; and a program of community engagement sought immersion in local distinctiveness, and “conversation” between the differing forms of knowledge and capacities embedded within the community and students (Armstrong 1999, Thomas 2006). The responsiveness of the student work to the character of Karumba’s culture and environment indicated remarkable levels of immersion, and the community highly valued the project outcomes: four strategic planning options which attracted $830 000 in state government funding for implementation.

Applying incremental EM to Bayesian classifiers in the learning of hyperspectral remote sensing data

In this paper, we apply the incremental EM method to Bayesian Network Classifiers to learn and interpret hyperspectral sensor data in robotic planetary missions. Hyperspectral image spectroscopy is an emerging technique for geological investigations from airborne or orbital sensors. Many spacecraft carry spectroscopic equipment as wavelengths outside the visible light in the electromagnetic spectrum give much greater information about an object. The algorithm used is an extension to the standard Expectation Maximisation (EM). The incremental method allows us to learn and interpret the data as they become available. Two Bayesian network classifiers were tested: the Naive Bayes, and the Tree-Augmented-Naive Bayes structures. Our preliminary experiments show that incremental learning with unlabelled data can improve the accuracy of the classifier.

Development of an online condition monitoring system for slow speed machinery

One of the main challenges of slow speed machinery condition monitoring is that the energy generated from an incipient defect is too weak to be detected by traditional vibration measurements due to its low impact energy. Acoustic emission (AE) measurement is an alternative for this as it has the ability to detect crack initiations or rubbing between moving surfaces. However, AE measurement requires high sampling frequency and consequently huge amount of data are obtained to be processed. It also requires expensive hardware to capture those data, storage and involves signal processing techniques to retrieve valuable information on the state of the machine. AE signal has been utilised for early detection of defects in bearings and gears. This paper presents an online condition monitoring (CM) system for slow speed machinery, which attempts to overcome those challenges. The system incorporates relevant signal processing techniques for slow speed CM which include noise removal techniques to enhance the signal-to-noise and peak-holding down sampling to reduce the burden of massive data handling. The analysis software works under Labview environment, which enables online remote control of data acquisition, real-time analysis, offline analysis and diagnostic trending. The system has been fully implemented on a site machine and contributing significantly to improve the maintenance efficiency and provide a safer and reliable operation.

Extending constructability concept to include operation and maintenance issues

The concept of constructability uses integration art of individual functions through a valuable and timely construction inputs into planning and design development stages. It results in significant savings in cost and time needed to finalize infrastructure projects. However, available constructability principles, developed by CII Australia (1993), do not cover Operation and Maintenance (O&M) phases of projects, whilst major cost and time in multifaceted infrastructure projects are spent in post-occupancy stages. This paper discusses the need to extend the constructability concept by examining current O&M issues in the provision of multifaceted building projects. It highlights available O&M problems and shortcomings of building projects, as well as their causes and reasons in different categories. This initial categorization is an efficient start point for testing probable present O&M issues in various cases of complex infrastructure building projects. This preliminary categorization serve as a benchmark to develop an extended constructability model that considers the whole project life cycle phases rather than a specific phase. It anticipates that the development of an extended constructability model can reduce significant number of reworks, mistakes, extra costs and time wasted during delivery stages of multifaceted building projects.

Mapping the ethical journey of experienced nurses now practising in rural and remote hospitals in central and south-west Queensland and in domiciliary services in Brisbane : a grounded theory approach

The aim of this thesis has been to map the ethical journey of experienced nurses now practising in rural and remote hospitals in central and south-west Queensland and in domiciliary services in Brisbane. One group of the experienced nurses in the study were Directors of Nursing in rural and remote hospitals. These nurses were “hands on”, “multi-skilled “ nurses who also had the task of managing the hospital. Also there were two Directors of Nursing from domiciliary services in Brisbane. A grounded theory method was used. The nurses were interviewed and the data retrieved from the interviews was coded, categorised and from these categories a conceptual framework was generated. The literature which dealt with the subject of ethical decision making and nurses also became part of the data. The study revealed that all these nurses experienced moral distress as they made ethical decisions. The decision making categories revealed in the data were: the area of financial management; issues as end of life approaches; allowing to die with dignity; emergency decisions; experience of unexpected death; the dilemma of providing care in very difficult circumstances. These categories were divided into two chapters: the category related to administrative and financial constraints and categories dealing with ethical issues in clinical settings. A further chapter discussed the overarching category of coping with moral distress. These experienced nurses suffered moral distress as they made ethical decisions, confirming many instances of moral distress in ethical decision making documented in the literature to date. Significantly, the nurses in their interviews never mentioned the ethical principles used in bioethics as an influence in their decision making. Only one referred to lectures on ethics as being an influence in her thinking. As they described their ethical problems and how they worked through them, they drew on their own previous experience rather than any knowledge of ethics gained from nursing education. They were concerned for their patients, they spoke from a caring responsibility towards their patients, but they were also concerned for justice for their patients. This study demonstrates that these nurses operated from the ethic of care, tempered with the ethic of responsibility as well as a concern for justice for their patients. Reflection on professional experience, rather than formal ethics education and training, was the primary influence on their ethical decision making.