Determination of trace elements in bovine semen samples by inductively coupled plasma mass spectrometry and data mining techniques for identification of bovine class

The reproductive performance of cattle may be influenced by several factors, but mineral imbalances are crucial in terms of direct effects on reproduction. Several studies have shown that elements such as calcium, copper, iron, magnesium, selenium, and zinc are essential for reproduction and can prevent oxidative stress. However, toxic elements such as lead, nickel, and arsenic can have adverse effects on reproduction. In this paper, we applied a simple and fast method of multi-element analysis to bovine semen samples from Zebu and European classes used in reproduction programs and artificial insemination. Samples were analyzed by inductively coupled plasma spectrometry (ICP-MS) using aqueous medium calibration and the samples were diluted in a proportion of 1:50 in a solution containing 0.01% (vol/vol) Triton X-100 and 0.5% (vol/vol) nitric acid. Rhodium, iridium, and yttrium were used as the internal standards for ICP-MS analysis. To develop a reliable method of tracing the class of bovine semen, we used data mining techniques that make it possible to classify unknown samples after checking the differentiation of known-class samples. Based on the determination of 15 elements in 41 samples of bovine semen, 3 machine-learning tools for classification were applied to determine cattle class. Our results demonstrate the potential of support vector machine (SVM), multilayer perceptron (MLP), and random forest (RF) chemometric tools to identify cattle class. Moreover, the selection tools made it possible to reduce the number of chemical elements needed from 15 to just 8.

Dental caries-related quality of life and socioeconomic status of preschool children, Bauru, SP

AIM: To evaluate oral health-related quality of life of preschool children of Bauru, State of São Paulo, Brazil, and associate it with socioeconomic profile of households. METHODS: The sample consisted of 229 preschool children between 3 and 5 years and the dmft (decayed, missing due to caries, filled teeth) index was adopted for assessment children's dental caries in accordance with the standards recommended by the World Health Organization. Questionnaires were used for evaluation oral health-related quality of life (Early Childhood Oral Health Impact Scale) and socioeconomic profile of parents or guardians of the preschool children. Statistical analysis was performed descriptively by relative and absolute frequencies and by Spearman's correlation and Kruskal-Wallis test (p <0.05). RESULTS: A dmft of 1.65 (± 2.87) and a Sic Index 4.88 (± 3.20) were found, indicating the polarization of dental caries in the studied group. It was verified low influence of oral health on quality of life of the children examined. With respect to socioeconomic classification, 66.38% of families were in the lower middle class. Linear and statistically significant correlation was found between dmft and oral health-related quality of life for the overall score and domains of the questionnaire (p<0.001). CONCLUSIONS: It was found low influence of oral health on quality of life of the preschool children and the assessment of socioeconomic conditions of the children's families may guide practices aiming to reducing inequalities in the distribution of dental caries in the population.

Prevalence of anxiety, depression and quality of life in HTLV-1 infected patients

The HAM/TSP caused by HTLV-1 infection usually affects patients to disabling states, and sometimes can lead them to paraplegia presenting symptoms of depression and anxiety, impacting on quality of life. Objective: The purpose of this study was to evaluate the frequency of depression and anxiety and its impact on quality of life in HTLV-1-infected TSP/HAM patients. Material and Methods: This was a cross-sectional study including 67 asymptomatic (control group) and 63 with TSP/HAM subjects. The instruments used were a demographic questionnaire, scales for anxiety and depression diagnosis (BDI and BAI), questionnaire for the assessment of Quality of Life of the World Health Organization (WHOQOL-Brief) and neurological scale to measure the disability level (Osame’s Disability Status Scale). All patients had HTLV-I diagnosis by serological and molecular approaches, monitored at Instituto de Infectologia Emílio Ribas from May 2008 to July 2009. Data were analyzed statistically by frequencies, the Mann-Whitney test and the Spearman correlation test. Data among groups were analyzed and correlated with functional and severity aspects. Results: The results showed that patients with HAM/TSP compared to asymptomatic carriers had higher rates of depression (p < 0.001) and anxiety (p < 0.001), and impairment on quality of life in the areas of: dissatisfaction with health (p < 0.001), physical (p < 0.001) and the environment (p = 0.003). The main factors that correlated with levels of depression and anxiety and the domains of the WHOQOL-brief were: education, family income and social class. Conclusion: A well conducted evaluation and counseling may help in treatment, for a better quality of life of these patients.

NMR, Metabonomics and Molecular Profiles: Applications to the Quality Assessment of Foodstuffs

Nuclear Magnetic Resonance (NMR) is a branch of spectroscopy that is based on the fact that many atomic nuclei may be oriented by a strong magnetic field and will absorb radiofrequency radiation at characteristic frequencies. The parameters that can be measured on the resulting spectral lines (line positions, intensities, line widths, multiplicities and transients in time-dependent experi-ments) can be interpreted in terms of molecular structure, conformation, molecular motion and other rate processes. In this way, high resolution (HR) NMR allows performing qualitative and quantitative analysis of samples in solution, in order to determine the structure of molecules in solution and not only. In the past, high-field NMR spectroscopy has mainly concerned with the elucidation of chemical structure in solution, but today is emerging as a powerful exploratory tool for probing biochemical and physical processes. It represents a versatile tool for the analysis of foods. In literature many NMR studies have been reported on different type of food such as wine, olive oil, coffee, fruit juices, milk, meat, egg, starch granules, flour, etc using different NMR techniques. Traditionally, univariate analytical methods have been used to ex-plore spectroscopic data. This method is useful to measure or to se-lect a single descriptive variable from the whole spectrum and , at the end, only this variable is analyzed. This univariate methods ap-proach, applied to HR-NMR data, lead to different problems due especially to the complexity of an NMR spectrum. In fact, the lat-ter is composed of different signals belonging to different mole-cules, but it is also true that the same molecules can be represented by different signals, generally strongly correlated. The univariate methods, in this case, takes in account only one or a few variables, causing a loss of information. Thus, when dealing with complex samples like foodstuff, univariate analysis of spectra data results not enough powerful. Spectra need to be considered in their wholeness and, for analysing them, it must be taken in consideration the whole data matrix: chemometric methods are designed to treat such multivariate data. Multivariate data analysis is used for a number of distinct, differ-ent purposes and the aims can be divided into three main groups: • data description (explorative data structure modelling of any ge-neric n-dimensional data matrix, PCA for example); • regression and prediction (PLS); • classification and prediction of class belongings for new samples (LDA and PLS-DA and ECVA). The aim of this PhD thesis was to verify the possibility of identify-ing and classifying plants or foodstuffs, in different classes, based on the concerted variation in metabolite levels, detected by NMR spectra and using the multivariate data analysis as a tool to inter-pret NMR information. It is important to underline that the results obtained are useful to point out the metabolic consequences of a specific modification on foodstuffs, avoiding the use of a targeted analysis for the different metabolites. The data analysis is performed by applying chemomet-ric multivariate techniques to the NMR dataset of spectra acquired. The research work presented in this thesis is the result of a three years PhD study. This thesis reports the main results obtained from these two main activities: A1) Evaluation of a data pre-processing system in order to mini-mize unwanted sources of variations, due to different instrumental set up, manual spectra processing and to sample preparations arte-facts; A2) Application of multivariate chemiometric models in data analy-sis.

Quality of Service in Distributed Stream Processing for large scale Smart Pervasive Environments

The wide diffusion of cheap, small, and portable sensors integrated in an unprecedented large variety of devices and the availability of almost ubiquitous Internet connectivity make it possible to collect an unprecedented amount of real time information about the environment we live in. These data streams, if properly and timely analyzed, can be exploited to build new intelligent and pervasive services that have the potential of improving people's quality of life in a variety of cross concerning domains such as entertainment, health-care, or energy management. The large heterogeneity of application domains, however, calls for a middleware-level infrastructure that can effectively support their different quality requirements. In this thesis we study the challenges related to the provisioning of differentiated quality-of-service (QoS) during the processing of data streams produced in pervasive environments. We analyze the trade-offs between guaranteed quality, cost, and scalability in streams distribution and processing by surveying existing state-of-the-art solutions and identifying and exploring their weaknesses. We propose an original model for QoS-centric distributed stream processing in data centers and we present Quasit, its prototype implementation offering a scalable and extensible platform that can be used by researchers to implement and validate novel QoS-enforcement mechanisms. To support our study, we also explore an original class of weaker quality guarantees that can reduce costs when application semantics do not require strict quality enforcement. We validate the effectiveness of this idea in a practical use-case scenario that investigates partial fault-tolerance policies in stream processing by performing a large experimental study on the prototype of our novel LAAR dynamic replication technique. Our modeling, prototyping, and experimental work demonstrates that, by providing data distribution and processing middleware with application-level knowledge of the different quality requirements associated to different pervasive data flows, it is possible to improve system scalability while reducing costs.

A new class of bragg stacks and its principle application

This work is focused on the development of high quality nanoporous 1D photonic crystals –so called Bragg stacks – made by spin-coating of approximately 25 nm large SiO2 and TiO2 nanoparticles bearing interparticle voids large enough to infiltrate reactive species. Therefore, the first part of this work describes the synthesis of well-dispersed TiO2 nanoparticles in this size range (the corresponding SiO2 nanoparticles are commercially available). In the second part, a protocol was developed to prepare nanoporous Bragg stacks of up to 12 bilayers with high quality and precision. Tailor-made Bragg stacks were prepared for different applications such as (i) a surface emitting feedback laser with a FWHM of only 6 nm and (ii) an electrochromic device with absorption reversibly switchable by an external electrical bias independently of the Bragg reflection. In the last chapter, the approach to 1D photonic crystals is transferred to 1D phononic crystals. Contrast in the modulus is achieved by spin-coating SiO2 and PMMA as high and low moduli material. This system showed a band gap of fg = 12.6 GHz with a width of Dfg/fg = 4.5 GHz.

Influence of beveling and ultrasound application on marginal adaptation of box-only Class II (slot) resin composite restorations

A laboratory study was performed to assess the influence of beveling the margins of cavities and the effects on marginal adaptation of the application of ultrasound during setting and initial light curing. After minimal access cavities had been prepared with an 80 microm diamond bur, 80 box-only Class II cavities were prepared mesially and distally in 40 extracted human molars using four different oscillating diamond coated instruments: (A) a U-shaped PCS insert as the non-beveled control (EMS), (B) Bevelshape (Intensiv), (C) SonicSys (KaVo) and (D) SuperPrep (KaVo). In groups B-D, the time taken for additional bevel finishing was measured. The cavities were filled with a hybrid composite material in three increments. Ultrasound was also applied to one cavity per tooth before and during initial light curing (10 seconds). The specimens were subjected to thermomechanical stress in a computer-controlled masticator device. Marginal quality was assessed by scanning electron microscopy and the results were compared statistically. The additional time required for finishing was B > D > C (p < or = 0.05). In all groups, thermomechanical loading resulted in a decrease in marginal quality. Beveling resulted in higher values for "continuous" margins compared with that of the unbeveled controls. The latter showed better marginal quality at the axial walls when ultrasound was used. Beveling seems essential for good marginal adaptation but requires more preparation time. The use of ultrasonic vibrations may improve the marginal quality of unbeveled fillings and warrants further investigation.

Benefits of cardiac surgery in octogenarians--a postoperative quality of life assessment

OBJECTIVE: Assessment of postoperative quality of life in patients over 80 years after cardiac surgery including coronary artery bypass grafting (CABG), aortic valve replacement (AVR) and combined procedures. METHODS: Quality of life of n=136 patients over 80 years at operation (82.3+/-2.1 years), undergoing isolated CABG in 61 patients (45%), isolated AVR in 34 patients (25%) and a combination of CABG and AVR in 41 patients (30%) between January 1999 and December 2003 was reviewed. Preoperatively 66.2% presented in NYHA-class III/IV or CCS-class III/IV. Mean ejection fraction (EF) was 59.5%+/-14.0 (range 25-90%). Quality of life assessment was performed via a Seattle Angina Questionnaire. Follow-up was 100% complete for a total of 890 days (69-1853 days). RESULTS: Five-year survival was 70% for the CABG group, 75% for the AVR group and 65% for the CABG/AVR group. Quality of life was remarkable in all of the three groups after surgery. Overall 97 patients (81%) were not or little disabled in their daily activity. One hundred and twelve patients (93%) were free or considerably less symptomatic. Seventy-eight patients or 65% reported to be very satisfied with their current quality of life and 112 patients (93%) felt very reassured to have continuous full access to medical treatment despite of their advanced age. CONCLUSIONS: A remarkable quality of life and important improvement in the functional status after cardiac surgery in patients over 80 paired with a satisfactory medium-term survival justify early intervention for heart disease in this age group. Therefore, referral practice for patients over 80 years for heart surgery should be handled liberally.

Effects of a comprehensive rehabilitation program on quality of life in patients with chronic heart failure

This evaluation was performed to assess the effects of a new, comprehensive outpatient rehabilitation program on generic and disease-specific quality of life related to exercise tolerance in stable chronic heart failure patients. Fifty-one patients (aged 59+/-11 years; 84% men) were treated for 12 weeks. Patients underwent optimized drug treatment, exercise training, and counseling and education. At baseline and at the end of the program, functional status, exercise capacity, and quality of life were assessed using the Medical Outcomes Study 36-item Short-Form Health Survey and the Minnesota Living with Heart Failure Questionnaire. Left ventricular ejection fraction and New York Heart Association functional class, as well as measures of physical fitness and walking distance covered in 6 minutes, improved significantly (by 11%-20% and by 58% on average, respectively). Physical functioning (effect size, 0.38; p<0.0001), role functioning (effect size, 0.17; p<0.05), and mental component score (effect size, 0.47; p<0.0001) on the questionnaire improved significantly. Disease-specific quality of life improved in sum score (effect size, 0.24; p<0.0001) and physical component score (effect size, 0.35; p<0.0001). The latter was inversely correlated to improvement in peak power output (r= -0.31; p<0.05). In patients with stable chronic heart failure, significant improvements in both generic and disease-specific quality of life related to improved exercise tolerance can be achieved within 12 weeks of comprehensive rehabilitation.

[Stress tolerance and quality of life--effect of a comprehensive ambulatory rehabilitation program for patients with chronic heart failure]

Chronic heart failure (CHF) impairs quality of life (QoL) much stronger than other chronic diseases. The objective of this evaluation was to assess the effect of a new integrated comprehensive outpatients rehabilitation program on somatic parameters and quality of life in 51 patients with stable CHF. After rehabilitation, left ventricular ejection fraction, NYHA class, and parameters of sub-maximum and maximum exercise capacity improved significantly between 11 and 20%, and 6-minute walking distance by 58% on average (p < 0.0001). Non-disease specific QoL (Short Form-36 questionnaire) improved in only 2 of 8 subscales (physical functioning [effect size 0.38, p < 0.001], and role functioning [effect size 0.17, p < 0.05]), and a mental component score [effect size 0.47, p < 0.0001]. Disease-specific QoL (Minnesota Living with Heart Failure questionnaire) improved in terms of sum score [effect size 0.24, p < 0.0001], and physical component score [effect size 0.35, p < 0.0001]. Improvement in exercise capacity correlated significantly with improvements in parameters of disease-specific QoL.

Quality of life of grown-up congenital heart disease patients after congenital cardiac surgery

BACKGROUND: Due to better early and long-term outcome, the increasing population of grown-ups with congenital heart disease (GUCH) brings up unexpected quality of life (QoL) issues. The cardiac lesion by itself is not always the major problem for these patients, since issues pertaining to QoL and psychosocial aspects often predominate. This study analyses the QoL of GUCH patients after cardiac surgery and the possible impact of medical and psychosocial complications. PATIENTS AND METHODS: A questionnaire package containing the SF-36 health survey (health related QoL), the HADS test (anxiety/depression aspects) and an additional disease specific questionnaire was sent to 345 patients (mean 26+/-11 years) operated for isolated transposition of the great arteries (TGA), tetralogy of Fallot (TOF), and ventricular septal defect (VSD). The scores were compared with age- and gender-matched standard population data and in relation to the underlying congenital heart disease (CHD). RESULTS: In all SF-36 and HADS health dimensions the GUCH patients showed excellent scores (116+/-20), which are comparable to the standard population (100+/-15), regardless of the initial CHD (p=0.12). Eighty-two percent of the patients were found to be in NYHA class I and 83% patients declared that they do not consider their QoL to be limited by their malformation. Complications like reoperations (p=0.21) and arrhythmias (p=0.10) do not show significant impact on the QoL. The additional questionnaire revealed that 76% of adult patients have a fulltime job, 18% receive a full or partial disability pension, 21% reported problems with insurances, most of them regarding health insurances (67%), and 4.4% of adult patients declared to have renounced the idea of having children due to their cardiac malformation. CONCLUSION: QoL in GUCH patients following surgical repair of isolated TOF, TGA and VSD is excellent and comparable to standard population, this without significant difference between the diagnosis groups. However, these patients are exposed to a high rate of complications and special psychosocial problems, which are not assessed by standardized questionnaires, such as the SF-36 and HADS. These findings highlight the great importance for a multidisciplinary and specialized follow-up for an adequate management of these complex patients.

Increasing Quality in large scale University Courses

Quality of education should be stable or permanently increased – even if the number of students rises. Quality of education is often related to possibilities for active learning and individual facilitation. This paper deals with the question how high-quality learning within oversized courses could be enabled and it presents the approach of e-flashcards that enables active learning and individual facilitation within large scale university courses.

Impact of SLM build parameters on the surface quality

Additive manufacturing by melting of metal powders is an innovative method to create one-offs and customized parts. Branches like dentistry, aerospace engineering and tool making were indicated and the manufacturing methods are established. Besides all the advantages, like freedom of design, manufacturing without a tool and the reduction of time-to-market, there are however some disadvantages, such as reproducibility or the surface quality. The surface quality strongly depends on the orientation of the component in the building chamber, the process parameters which are laser power and exposure time, but also on the so-called “hatch”-strategy, which includes the way the laser exposes the solid areas. This paper deals with the investigation and characterization of the surface quality of generated parts produced by SLM. Main process parameters including part orientation, part size and hatch strategies are investigated and monitored. The outcome is a recommendation of suitable hatch strategies depending on desired part properties. This includes metered values and takes into account process stability and reproducibility.

Surface quality of profile extrusion dies manufactured by Selective Laser Melting

The design of plastics profile extrusion dies becomes increasingly more complex so that conventional manufacture processes reach their limit in the die manufacture. A feasible manufacture of arbitrarily designed dies is only possible by additive manufacturing. An especially promising process is hereby the Selective Laser Melting with which metal parts with series identical mechanical properties can be produced without the need for part specific tooling or downstream sintering processes. Disadvantegeous is, however, the relatively rough surface of additively manufactured parts. Against this background, the manufacturing of an profile extrusion die by Selective Laser Melting and the plastics profile surface quality, that can be achieved with such dies, is investigated. For this purpose, profiles are extruded both with an additively manufactured die and a conventionally milled sample of the same die geometry. In case of the additively manufactured die a concept for the surface finishing of the flow channel is required, which can be applied to arbitrarily shaped geometries. Therefore, two different reworking processes are applied only to the die land of the flow channel. The comparison of the surface roughnesses shows that the additively manufactured die with a polished die land delivers the same surface quality as the conventional die.

Surgery for low-grade glioma infiltrating the central cerebral region: location as a predictive factor for neurological deficit, epileptological outcome, and quality of life

OBJECT A main concern with regard to surgery for low-grade glioma (LGG, WHO Grade II) is maintenance of the patient's functional integrity. This concern is particularly relevant for gliomas in the central region, where damage can have grave repercussions. The authors evaluated postsurgical outcomes with regard to neurological deficits, seizures, and quality of life. METHODS Outcomes were compared for 33 patients with central LGG (central cohort) and a control cohort of 31 patients with frontal LGG (frontal cohort), all of whom had had medically intractable seizures before undergoing surgery with mapping while awake. All surgeries were performed in the period from February 2007 through April 2010 at the same institution. RESULTS For the central cohort, the median extent of resection was 92% (range 80%-97%), and for the frontal cohort, the median extent of resection was 93% (range 83%-98%; p = 1.0). Although the rate of mild neurological deficits was similar for both groups, seizure freedom (Engel Class I) was achieved for only 4 (12.1%) of 33 patients in the central cohort compared with 26 (83.9%) of 31 patients in the frontal cohort (p < 0.0001). The rate of return to work was lower for patients in the central cohort (4 [12.1%] of 33) than for the patients in the frontal cohort (28 [90.3%] of 31; p < 0.0001). CONCLUSIONS Resection of central LGG is feasible and safe when appropriate intraoperative mapping is used. However, seizure control for these patients remains poor, a finding that contrasts markedly with seizure control for patients in the frontal cohort and with that reported in the literature. For patients with central LGG, poor seizure control ultimately determines quality of life because most will not be able to return to work.