纳米半导体技术

本书介绍了纳米半导体材料的定义、性质及其在未来信息技术中的地位的同时，主要介绍了纳米半导体材料制备的方法和共性关键技术，几种常用的纳米半导体材料的评价技术和应变自组装半导体量子点(线)的尺寸、密度分布、形貌、组分及结构特性的实验研究，纳米半导体材料的电子结构、光学和电学性质，基于子带跃迁的量子级联激光器的工作原理、特性和它的发展现状及其应用前景分析，最后重点介绍了纳米半导体器件及应用。本书适合于从事或对纳米半导体科学技术有兴趣的科研工作者、教师、研究生、本科生和工程技术人员阅读，有些章节可作为科普读物。

Homoepitaxial growth and characterization of 4H-SiC epilayers by low-pressure hot-wall chemical vapor deposition

Horizontal air-cooled low-pressure hot-wall CVD (LP-HWCVD) system is developed to get high quality 4H-SiC epilayers. Homoepitaxial growth of 4H-SiC on off-oriented Si-face (0001) 4H-SiC substrates purchased from Cree is performed at a typical temperature of 1500 degrees C with a pressure of 40 Torr by using SiH4+C2H4+H-2 gas system. The surface morphologies and structural and optical properties of 4H-SiC epilayers are characterized with Nomarski optical microscope, atomic force microscopy (AFM), x-ray diffraction, Raman scattering, and low temperature photoluminescence (LTPL). The background doping of 32 pm-thick sample has been reduced to 2-5 x 10(15) cm(-3). The FWHM of the rocking curve is 9-16 arcsec. Intentional N-doped and B-doped 4H-SiC epilayers are obtained by in-situ doping of NH3 and B2H6, respectively. Schottky barrier diodes with reverse blocking voltage of over 1000 V are achieved preliminarily.

Morphological defects and uniformity issues of 4H-SiC homoepitaxial layers grown on off-oriented (0001)Si faces

The morphological defects and uniformity of 4H-SiC epilayers grown by hot wall CVD at 1500 degrees C on off-oriented (0001) Si faces are characterized by atomic force microscope, Nomarski optical microscopy, and Micro-Raman spectroscopy. Typical morphological defects including triangular defects, wavy steps, round pits, and groove defects are observed in mirror-like SiC epilayers. The preparation of the substrate surface is necessary for the growth of high-quality 4H-SiC epitaxial layers with low-surface defect density under optimized growth conditions. (c) 2006 Elsevier Ltd. All rights reserved.

冠醚修饰电极及其在分析化学中的应用

本论文较系统地研究了Naf:on聚合物薄膜冠醚修饰电极阳极溶出伏安法在分析中的应用。首次将Naf:on薄膜冠醚类化合物修饰电极应用于铊、银和铅三种离子的测定，得到了高灵敏度的分析方法亦用于实际样品测定。用涂层法制备了Naf:on聚合物薄膜冠醚（二环已基18－冠－6）化学修饰电极，用这种修饰电极测定金属离子的高灵敏度来源于将Naf:on对大阳离子的强离子交换能力、冠醚类化合物络合金属阳离子形成大阳离子的能力与溶出伏安法的高灵敏度三者的结合，冠醚化合物中性分子可与金属阳离子络合形成大络阳离子：M~(n+)＋qC=(MC_q)~(n+) Naf:on膜由于其具有的对大阳离子的强交换能力而将冠醚与和金属离子形成的大阳离子络合并吸附于电极表面，在溶出伏安法的富集过程中，电位置于是以令（MCq）~(n+)还原的位置以使（MCq）~(n+)还原：（MCq）~(n+)＋ne=M＋qC 析出的零价态的金属可在Naf:on膜内固定，同时又放出冠醚分子成为新的未被占据的络合吸附中心，继续捕获溶液中的阳离子从而起到富集作用。由于使用溶出伏安法排除电极表面络合吸附饱和的问题，从而使本方法灵敏度大大高于一般的使用化学修饰电极进行预富集的分析测定方法。提出了Naf:on薄膜冠醚修饰电极阳极溶出伏安法测定水溶液中Te(I)的方法，在电位为－1.30 Vvs.Ag/Ag ce处0.1高氯酸锂溶液中，用该修饰电极富集30分钟，检测下限可低至2×10~(-12)M（0.4 ppt）。溶液中Te(I)浓度在5×10(-12)M～1×10(-8)M范围内与溶出峰电流成良好的线性关系且通过原点，可以用标准加入法测定。常见共存元素Zn（II），Su（II），Cu（II），Fe（II），Co（II），Ni（II），In（III）等无干扰。Pb（II）与Cd（II）共存时对Te（I）有干扰，同1×10~(-3)M EDTA掩蔽可有消除干扰。测定了合成样品中的Te（I）含量，平行测定七组样品相对标准偏差4.2％。本文法是目前Te（I）的分析中最灵敏的电化学方法之一。提出了Naf:on薄膜冠醚修饰电极阳极溶出伏安法测定水溶液中Ag（I）的方法。在0.01MHNO_3 4～7×10~(-3)M Cl混合溶液中，检测电位在－0.30Vvs.SCE富集30分钟，检出下限可低至2×10~(-12)M，是迄今所见Ag（I）的分析中灵敏度最高的电分析方法。Ag（I）浓度在2×10~(-11)M～1×10~(-8)M范围内与溶出峰电流成良好的线性关系且通过原点。五到十倍量的Hg（II）和Au（II）有干扰。用本法测定了分析纯硝酸铵中的银含量为0.000048％，平行测定七组样品相对标准偏差为3.7％。提出用Naf:on薄膜冠醚修饰电极阳极溶出伏安法测定水样中铅的方法。在0.lMLiNO_3底液中，电位在－1.10Vvs.SCE富庥3分钟检测限达5×10~(-10)M，方法快速灵敏。Pb（II）浓度在1×10~(-9)～1×10~(-7)M范围内与溶出峰电流呈线性关系。1×10~(-6)以上Cu（II）存在使Pb（II）的峰电流时显增加。用本方法测定了自来水样中的铅含量，平行测定七组样品相对标准偏差8.0％。该修饰电极在K~+浓度为1×10~(-5)～1×10~(-7)M范围内对K~+有能斯特响应。本工作为铊、铅、银的痕量分析提供了高灵敏度的方法，为溶出伏安法摆脱汞污染的问题做出了贡献，为化学修饰电极用于分析化学领域提供了新的途径。

Sequential coupling transport for the dark current of quantum dots-in-well infrared photodetectors

The dark current characteristics and temperature dependence for quantum dot infrared photodetectors have been investigated by comparing the dark current activation energies between two samples with identical structure of the dots-in-well in nanoscale but different microscale n-i-n environments. A sequential coupling transport mechanism for the dark current between the nanoscale and the microscale processes is proposed. The dark current is determined by the additive mode of two activation energies: E-a,E-micro from the built-in potential in the microscale and E-a,E-nano related to the thermally assisted tunneling in nanoscale. The activation energies E-a,E-micro and E-a,E-nano decrease exponentially and linearly with increasing applied electric field, respectively.

Influence of processing medium on frictional wear properties of ball bearing steel prepared by laser surface melting coupled with bionic principles

Coupling with bionic principles, an attempt to improve the wear resistance of ball bearing steel (GCr15) with biomimetic units on the surface was made using a pulsed Nd: YAG laser. Air and water film was employed as processing medium, respectively. The microstructures of biomimeitc units were examined by scanning electron microscope and X-ray diffraction was used to describe the microstructure and identify the phases as functions of different mediums as well as water film with different thicknesses. The results indicated that the microstructure zones in the biomimetic specimens processed with water film were more refined and had better wear resistance increased by 55.8% in comparison with that processed in air; a significant improvement in microhardness was achieved by laser surface melting. The application of water film provided considerable microstructural changes and much more regular grain shape in biomimetic units, which played a key role in improving the wear resistance of ball bearing steel. (c) 2010 Elsevier B.V. All rights reserved.

The thermal fatigue resistance of vermicular cast iron coupling with H13 steel units by cast-in process

This paper focuses on improving the thermal fatigue resistance on the surface of vermicular cast iron coupling with inserted H13 steel blocks that had different cross sections, by cast-in processing. The microstructure of bionic units was examined by scanning electron microscope. Micro-hardness and thermal fatigue resistance of bionic samples with varied cross sections and spacings were investigated, respectively. Results show that a marked metallurgical bonding zone was produced at interface between the inserted H13 steel block and the parent material - a unique feature of the bionic structure in the vermicular cast iron samples. The micro-hardness of the bionic samples has been significantly improved. Thermal resistance of the samples with the circular cross section was the highest and the bionics sample with spacing of 2 mm spacing had a much longer thermal fatigue life, thus resulting in the improvement for the thermal fatigue life of the bionic samples, due to the efficient preclusion for the generation and propagation of crack at the interface of H13 block and the matrix. Crown Copyright (c) 2010 Published by Elsevier Ltd. All rights reserved.

Fabrication of nano-sized grains by pulsed laser surface melting

In this work, the formation and characterization of nano-sized grains on the modified surfaces of GCr15 and H13 steels have been investigated. The material was processed by pulsed laser surface melting (LSM) under different depths of de-ionized water. The microstructures and phases of the melted zones were examined by x-ray diffraction, environmental field emission scanning electron microscopy and high resolution transmission electron microscopy. The results indicate that LSM under water can successfully fabricate nano-scaled grains on the surfaces of steel, due to the rapid solidification and crystallization by heterogeneous nucleation. The elemental segregation of chromium and activated heterogeneous nucleation mechanism of austenite in liquid metal play a key role in the formation of nano-sized grains at high cooling rates. This one-step technique provides us a new way to prepare uniform nano-scaled grains, and is of great importance for further understanding the growth of nano-materials under extreme conditions.

高电荷态离子~(126)Xe~(q+)与Ti固体表面作用的激发光谱

报道用 15 0keV的高电荷态离子1 2 6 Xeq + (6≤q≤ 30 )轰击Ti固体表面产生 2 0 0— 10 0 0nm波段发射光谱的实验结果 .结果显示 ,用电荷态足够高的离子作光谱激发源 ,无需很强的束流强度 (nA量级 ) ,便可激发起样品表面的原子和离子在可见光波段的特征谱线 .当入射离子剥离度q >qc≈ 2 0时 ,Ti原子及其离子的特征谱线强度突然显著增强 ;不同金属靶 ,特征谱线突然增强的qc值不同 .理论分析表明 ,这与q大于此临界值后 ,单电子转移释放能量激发靶材料传导电子气体的表面等离激元密切相关 .

Au LX射线发射截面和Al、Ti、Ni表面可见、红外光谱测量

本实验工作是在中国原子能科学研究院的HI-13串列加速器国家实验室第二测量厅原子物理实验平台上完成。本工作采用能量为20-50MeV的高电荷态O5+离子去轰击Au, 测量了不同能量下Au的L1、Lα、Lβ、Lγ的X射线谱，计算了不同能量下各条X射线的产生截面，并与ECPSSR理论计算结果进行了比较。实验结果表明σ（Ll）/σ(Lα) 和σ（Lγ）/σ(Lα)与ECPSSR理论计算结果符合比较好，而对于σ（Lβ）/σ(Lα)，在较低能区实验值略高于理论值。在中国科学院近代物理研究所320kV高电荷态离子实验研究平台上测量了Xeq+ (q=17-29)入射Al、Ti和Ni等表面诱发的可见光和红外光。通过对靶原子光谱线的研究，实验发现，随着入射离子的电荷态增高，原子和离子的各种光谱线可得到有效地激发。低速高电荷态离子入射金属固体表面，靶原子的特征谱线的激发强度，与入射离子的电荷态q密切相关。qc的实验测量值和理论计算值符合的较好

Phosphoproteome analysis of mouse liver using immobilized metal affinity purification and linear ion trap mass spectrometry

Since protein phosphorylation is a dominant mechanism of information transfer in cells, there is a great need for methods capable of accurately elucidating sites of phosphorylation. In recent years mass spectrometry has become an increasingly viable alternative to more traditional methods of phosphorylation analysis. The present study used immobilized metal affinity chromatography (IMAC coupled with a linear ion trap mass spectrometer to analyze phosphorylated proteins in mouse liver. A total of 26 peptide sequences defining 26 sites of phosphorylation were determined. Although this number of identified phosphoproteins is not large, the approach is still of interest because a series of conservative criteria were adopted in data analysis. We note that, although the binding of non-phosphorylated peptides to the IMAC column was apparent, the improvements in high-speed scanning and quality of MS/MS spectra provided by the linear ion trap contributed to the phosphoprotein identification. Further analysis demonstrated that MS/MS/MS analysis was necessary to exclude the false-positive matches resulting from the MS/MS experiments, especially for multiphosphorylated peptides. The use of the linear ion trap considerably enabled exploitation of nanoflow-HPLC/MS/MS, and in addition MS/MS/MS has great potential in phosphoproteome research of relatively complex samples. Copyright (C) 2004 John Wiley Sons, Ltd.