On the relationship between C and N fixation in nodulated alfalfa (Medicago sativa)

Legumes such as alfalfa (Medicago sativa L.) are vital N2-fixing crops accounting for a global N2 fixation of ~35 MtNyear-1. Although enzymatic and molecular mechanisms of nodule N2 fixation are now well documented, some uncertainty remains as to whether N2 fixation is strictly coupled with photosynthetic carbon fixation. That is, the metabolic origin and redistribution of carbon skeletons used to incorporate nitrogen are still relatively undefined. Here, we conducted isotopic labelling with both 15N2 and 13C-depleted CO2 on alfalfa plants grown under controlled conditions and took advantage of isotope ratio mass spectrometry to investigate the relationship between carbon and nitrogen turn-over in respired CO2, total organic matter and amino acids. Our results indicate that CO2 evolved by respiration had an isotopic composition similar to that in organic matter regardless of the organ considered, suggesting that the turn-over of respiratory pools strictly followed photosynthetic input. However, carbon turn-over was nearly three times greater than N turn-over in total organic matter, suggesting that new organic material synthesised was less N-rich than pre-existing organic material (due to progressive nitrogen elemental dilution) or that N remobilisation occurred to sustain growth. This pattern was not consistent with the total commitment into free amino acids where the input of new C and N appeared to be stoichiometric. The labelling pattern in Asn was complex, with contrasted C and N commitments in different organs, suggesting that neosynthesis and redistribution of new Asn molecules required metabolic remobilisation. We conclude that the production of new organic material during alfalfa growth depends on both C and N remobilisation in different organs. At the plant level, this remobilisation is complicated by allocation and metabolism in the different organs. Additional keywords: carbon exchange, carbon isotopes, nitrogen fixation, nitrogen 15 isotope

SEM evidence for existence of an apical disc on the scolex of Clestobothrium crassiceps (Rudolphi, 1819): comparative results of various fixation techniques

The scolex of the bothriocephalidean cestode Clestobothrium crassiceps was studied by means of scanning electron microscopy (SEM). The comparative results of various fixation procedures and techniques are presented. The scolex of C. crassiceps is oval to globular and exhibits two deep bothria which appear in the form of two lobes separated by a longitudinal groove. At the apex of the scolex, resembling a beret, an apical disc is present (oval, flattened and with a sinuous edge). Our results are compared with those previously reported in other species of Clestobothrium. This study represents the first report which highlights the presence of an apical disc in the scolex of C. crassiceps. It describes the effects of different procedures applied to our material during preparation and a comparative analysis results obtained using these various methods.

SEM evidence for existence of an apical disc on the scolex of Clestobothrium crassiceps (Rudolphi, 1819): comparative results of various fixation techniques

The scolex of the bothriocephalidean cestode Clestobothrium crassiceps was studied by means of scanning electron microscopy (SEM). The comparative results of various fixation procedures and techniques are presented. The scolex of C. crassiceps is oval to globular and exhibits two deep bothria which appear in the form of two lobes separated by a longitudinal groove. At the apex of the scolex, resembling a beret, an apical disc is present (oval, flattened and with a sinuous edge). Our results are compared with those previously reported in other species of Clestobothrium. This study represents the first report which highlights the presence of an apical disc in the scolex of C. crassiceps. It describes the effects of different procedures applied to our material during preparation and a comparative analysis results obtained using these various methods.

Labyrinthine fenestration for stapes fixation in chronic ear disease others than otosclerosis.

The objective of this study is to assess the results of labyrinthine fenestration for fixed stapes in chronic ear disease. Using a prospective database, pre- and postoperative audiometric data from patients undergoing labyrinthine fenestration for fixation of the stapes in chronic ear disease others than otosclerosis between 2002 and 2012 were evaluated. Twenty-three labyrinthine fenestrations in chronic ear disease were performed (17 malleo-stapedotomies, 4 incus-stapedotomies, 1 neo-malleus-stapedotomy, 1 TORP-stapedotomy). Overall, the mean short-term (2 months) and long-term (42 months) postoperative air-bone gap (0.5-3 kHz) were 17.5 and 16.5 dB, respectively; long-term air-bone gap of <20 dB was obtained in 73 % of patients. There was no significant difference in air-bone gap closure between tympanosclerotic and post inflammatory osteogenic fixation of the stapes (p = 0.267). Hearing benefit success using the 'Belfast rule of the thumb' was achieved in 48 %. Normal bilateral hearing was achieved in 17 % and bilateral symmetric hearing impairment in 26 %. Only in 4 %, bone conduction worsened by more than 5 dB. Labyrinthine fenestration is an option in selected cases of stapes fixation in chronic ear disease and provides hearing gain without significant risk for sensorineural hearing loss. In those already selected cases, hearing benefit success 'Belfast rule of the thumb' is achieved only in half of the cases. This and the possible alternatives, should therefore be discussed preoperatively.

Utilisation d'un marché de prédictions dans le cadre du projet MICS

Ce diplôme présente les marchés prédictifs, qui sont un moyen d'agréger l'information en utilisant les processus à la base des marchés financiers et en proposant des contrats à termes représentant la probabilité de survenance d'une proposition. Des publications dans le domaine de la finance, du management ou de l'informatique font référence à l'utilisation des marchés prédictifs et démontrent les bons résultats obtenus par cette méthode. Nous nous sommes demandé s'il était possible de concevoir et utiliser un tel marché dans un milieu académique, pour prédire l'émergence de nouvelles théories et applications dans le domaine des communications mobiles. Pour supporter notre réflexion, nous avons mis en place un prototype qui devrait pouvoir nous permettre de tester le concept, d'étudier les fonctions de calcul de prix et les mécanismes d'agrégation de l'information. Pour débuter, nous présentons l'état de l'art en nous appuyant sur la littérature parue depuis 1988 lorsque l'University of Iowa a lancé sa plate-forme Iowa Electronic Market (IEM) dans le cadre de l'élection présidentielle Bush-Dukakis. Depuis, plusieurs chercheurs se sont penchés sur les marchés prédictifs comme instrument de prévision dans de nombreux domaines: politique, sport, cinéma, marketing, ... Nous allons comparer les marchés prédictifs à d'autres outils de prévision puis nous présenterons en détail les marchés prédictifs ainsi qu'un essai d'en formaliser les spécifications. Nous illustrerons alors ceci par des exemples tirés des principales plates-formes en activité pour le moment. S'ensuit une discussion sur l'orientation ludique des plates-formes actuelles et une présentation des utilisations que l'on pourrait en faire et qui apporteraient un réel bénéfice. Nous nous penchons alors sur l'analyse des besoins tant de l'expérimentateur que des utilisateurs. Cherchant des raisons à l'absence totale de telles plates-formes dans le cadre de la recherche, nous avons mené une série d'entretiens avec des professeurs de l'EPFL engagés dans la direction du projet MICS. Leurs réticences et craintes ont été prises en compte pour la définition des spécifications du prototype. Nous utilisons la méthode de (Spann and Skiera 2003) pour définir les spécifications de la plate-forme. Ces spécifications comprennent le choix du but prévisionnel, qui dans notre cas découle directement de notre proposition de recherche, des mécanismes financiers à la base des transactions, ainsi que des moyens incitatifs mis en place pour amener les utilisateurs à utiliser la plate-forme et surtout, pour amener les plus éclairés d'entre eux à transmettre leurs informations au marché. Ces spécifications débouchent sur la présentation de quatre cas d'utilisation. Notre objectif étant de développer un prototype pour y tester nos hypothèses, nous faisons un tour d'horizon des plates-formes à disposition et présentons l'architecture de ce dernier, basé sur les développements à la base d'USIFEX, qui n'est plus en activité depuis quatre ans. Le prototype utilise la souplesse de la programmation objet en se basant sur le langage Python dans sa version 2.3. Nous nous attardons ensuite sur la présentation de l'interface du prototype et des interactions avec les utilisateurs. Il faudra par la suite s'attacher à refondre l'interface pour le faire évoluer vers plus de convivialité, et nous permettre de guider l'utilisateur lors de ses sessions sur la plate-forme. Les parties théoriques et logicielles sous toit il nous reste encore à décrire les contrats et la manière de les formuler. A nouveau nous nous penchons sur les marchés actuels pour y tirer des enseignements qui pourraient nous être utiles. N'ayant malheureusement pas fait l'objet de publications, la définition des contrats est intimement liée avec les auteurs qui les rédigent. Nous tentons de tirer quelques enseignements provenant des contrats actifs sur les marchés des matières premières pour proposer un cadre nous permettant de formaliser la rédaction d'un contrat. Ne s'agissant que d'une proposition, il faudra encore tester et compléter ce cadre pour pouvoir s'assurer que la manière de rédiger les contrats n'influence pas sur la pertinence des prédictions. Finalement, nous esquissons les travaux qu'il reste à accomplir avant de pouvoir mener les premiers tests réels de la plate-forme. De la formulation des contrats à l'étude des mécanismes combinatoires d'agrégation de l'information en passant par les fonctions de fixation du prix. Nous revenons sur les travaux effectués dans le cadre de ce diplôme et présentons quelques idées de recherche futures.

Development of porous glass-fiber reinforced composite for bone implants. Evaluation of antimicrobial effect and implant fixation

Cranial bone reconstructions are necessary for correcting large skull bone defects due to trauma, tumors, infections and craniotomies. Traditional synthetic implant materials include solid or mesh titanium, various plastics and ceramics. Recently, biostable glass-fiber reinforced composites (FRC), which are based on bifunctional methacrylate resin, were introduced as novel implant solution. FRCs were originally developed and clinically used in dental applications. As a result of further in vitro and in vivo testing, these composites were also approved for clinical use in cranial surgery. To date, reconstructions of large bone defects were performed in 35 patients. This thesis is dedicated to the development of a novel FRC-based implant for cranial reconstructions. The proposed multi-component implant consists of three main parts: (i) porous FRC structure; (ii) bioactive glass granules embedded between FRC layers and (iii) a silver-polysaccharide nanocomposite coating. The porosity of the FRC structure should allow bone ingrowth. Bioactive glass as an osteopromotive material is expected to stimulate the formation of new bone. The polysaccharide coating is expected to prevent bacterial colonization of the implant. The FRC implants developed in this study are based on the porous network of randomly-oriented E-glass fibers bound together by non-resorbable photopolymerizable methacrylate resin. These structures had a total porosity of 10–70 volume %, of which > 70% were open pores. The pore sizes > 100 μm were in the biologically-relevant range (50-400 μm), which is essential for vascularization and bone ingrowth. Bone ingrowth into these structures was simulated by imbedding of porous FRC specimens in gypsum. Results of push-out tests indicated the increase in the shear strength and fracture toughness of the interface with the increase in the total porosity of FRC specimens. The osteopromotive effect of bioactive glass is based on its dissolution in the physiological environment. Here, calcium and phosphate ions, released from the glass, precipitated on the glass surface and its proximity (the FRC) and formed bone-like apatite. The biomineralization of the FRC structure, due to the bioactive glass reactions, was studied in Simulated Body Fluid (SBF) in static and dynamic conditions. An antimicrobial, non-cytotoxic polysaccharide coating, containing silver nanoparticles, was obtained through strong electrostatic interactions with the surface of FRC. In in vitro conditions the lactose-modified chitosan (chitlac) coating showed no signs of degradation within seven days of exposure to lysozyme or one day to hydrogen peroxide (H2O2). The antimicrobial efficacy of the coating was tested against Staphylococcus aureus and Pseudomonas aeruginosa. The contact-active coating had an excellent short time antimicrobial effect. The coating neither affected the initial adhesion of microorganisms to the implant surface nor the biofilm formation after 24 h and 72 h of incubation. Silver ions released to the aqueous environment led to a reduction of bacterial growth in the culture medium.

Changes in N2 fixation in Stylosanthes scabra derived from tissue culture

Plants were regenerated from leaf-derived callus culture of Stylosanthes scabra, a polyploid legume tolerant to drought and adapted to acid soils. A total of 168 regenerants were planted out in Leonard jars in a complete randomized design. Nitrogen fixation and vegetative growth were indirectly evaluated by shoot dry weight, root dry weight, shoot N content and acetylene reduction activity. The results showed higher variation in the regenerants than in controls not submitted to tissue culture. Significant differences were found for all nitrogen fixation related-traits

Purification and binding analysis of the nitrogen fixation regulatory NifA protein from Azospirillum brasilense

NifA protein activates transcription of nitrogen fixation operons by the alternative sigma54 holoenzyme form of RNA polymerase. This protein binds to a well-defined upstream activator sequence (UAS) located at the -200/-100 position of nif promoters with the consensus motif TGT-N10-ACA. NifA of Azospirillum brasilense was purified in the form of a glutathione-S-transferase (GST)-NifA fusion protein and proteolytic release of GST yielded inactive and partially soluble NifA. However, the purified NifA was able to induce the production of specific anti-A. brasilense NifA-antiserum that recognized NifA from A. brasilense but not from K. pneumoniae. Both GST-NifA and NifA expressed from the E. coli tac promoter are able to activate transcription from the nifHDK promoter but only in an A. brasilense background. In order to investigate the mechanism that regulates NifA binding capacity we have used E. coli total protein extracts expressing A. brasilense nifA in mobility shift assays. DNA fragments carrying the two overlapping, wild-type or mutated UAS motifs present in the nifH promoter region revealed a retarded band of related size. These data show that the binding activity present in the C-terminal domain of A. brasilense NifA protein is still functional even in the presence of oxygen.

Délibération des fermiers généraux sur la fixation des ventes, les apurements et les bons de masse

[Acte. 1710-11-21. Paris]

Déliberation des fermiers généraux sur la fixation des ventes, les apurements et les bons de masse

[Acte. 1712-12-23. Paris]

Déliberation de MM. les fermiers généraux sur la fixation des ventes, les apurements et les bons de masse, pendant la 4e année de la régie de Ch. Cordier

[Acte. 1724-06-23. Paris]