Control design for positioning of underwater vehicles with control allocation

In this paper, we address the control design problem of positioning of over-actuated underwater vehicles. The proposed design is based on a control architecture with combined position and velocity loops and a control tuning method based on the decoupled models. We derive analytical tuning rules based on requirements of closed-loop stability, positioning performance, and the vehicle velocity dynamic characteristics. The vehicle modelling is considered from force to motion with appropriate simplifications related to low-speed manoeuvring hydrodynamics and vehicle symmetry. The control design is considered together with a control allocation mapping. This approach makes the control tuning independent of the characteristics of the force actuators and provides the basis for control reconfiguration in the presence of actuator failure. We propose an anti-wind-up implementation of the controller, which ensures that the constraints related to actuation capacity are not violated. This approach simplifies the control allocation problem since the actuator constraints are mapped into generalised force constraints.

Anti-wind-up designs for dynamic positioning of marine vehicles with control allocation

This paper presents a framework for the design of a joint motion controller and a control allocation strategy for dynamic positioning of marine vehicles. The key aspects of the proposed designs are a systematic approach to deal with actuator saturation and to inform the motion controller about saturation. The proposed system uses a mapping that translates the actuator constraint sets into constraint sets at the motion controller level. Hence, while the motion controller addresses the constraints, the control allocation algorithm can solve an unconstrained optimisation problem. The constrained control design is approached using a multivariable anti-wind-up strategy for strictly proper controllers. This is applicable to the implementation of PI and PID type of motion controllers.

Development of an inter-vehicle communications & positioning platform for transport safety applications

This project is a breakthrough in developing new scientific approaches for the design, development and evaluation of inter-vehicle communications, networking and positioning systems as part of Cooperative Intelligent Transportation Systems ensuring the safety of both roads and rail networks. This research focused on the elicitation, specification, analysis and validation of requirements for Vehicle-to-Vehicle communications and networking, and Vehicle-to-Vehicle positioning, which are accomplished with the research platform developed for this study. A number of mathematical models for communications, networking and positioning were developed from which simulations and field experiments were conducted to evaluate the overall performance of the platform. The outcomes of this research significantly contribute to improving the performance of the communications and positioning components of Cooperative Intelligent Transportation Systems.

High-frequency global navigation satellite system’s receivers for airborne gravimetry

The development of global navigation satellite systems (GNSS) provides a solution of many applied problems with increasingly higher quality and accuracy nowadays. Researches that are carried out by the Bavarian Academy of Sciences and Humanities in Munich (BAW) in the field of airborne gravimetry are based on sophisticated data processing from high frequency GNSS receiver for kinematic aircraft positioning. Applied algorithms for inertial acceleration determination are based on the high sampling rate (50Hz) and on reducing of such factors as ionosphere scintillation and multipath at aircraft /antenna near field effects. The quality of the GNSS derived kinematic height are studied also by intercomparison with lift height variations collected by a precise high sampling rate vertical scale [1]. This work is aimed at the ways of more accurate determination of mini-aircraft altitude by means of high frequency GNSS receivers, in particular by considering their dynamic behaviour.

Precise relative clock synchronization for distributed control using TSC registers

Precise clock synchronization is essential in emerging time-critical distributed control systems operating over computer networks where the clock synchronization requirements are mostly focused on relative clock synchronization and high synchronization precision. Existing clock synchronization techniques such as the Network Time Protocol (NTP) and the IEEE 1588 standard can be difficult to apply to such systems because of the highly precise hardware clocks required, due to network congestion caused by a high frequency of synchronization message transmissions, and high overheads. In response, we present a Time Stamp Counter based precise Relative Clock Synchronization Protocol (TSC-RCSP) for distributed control applications operating over local-area networks (LANs). In our protocol a software clock based on the TSC register, counting CPU cycles, is adopted in the time clients and server. TSC-based clocks offer clients a precise, stable and low-cost clock synchronization solution. Experimental results show that clock precision in the order of 10~microseconds can be achieved in small-scale LAN systems. Such clock precision is much higher than that of a processor's Time-Of-Day clock, and is easily sufficient for most distributed real-time control applications over LANs.

A runtime integrity monitoring framework for real-time relative positioning systems based on GPS and DSRC

This paper provides a three-layered framework to monitor the positioning performance requirements of Real-time Relative Positioning (RRP) systems of the Cooperative Intelligent Transport Systems (C-ITS) that support Cooperative Collision Warning (CCW) applications. These applications exploit state data of surrounding vehicles obtained solely from the Global Positioning System (GPS) and Dedicated Short-Range Communications (DSRC) units without using other sensors. To this end, the paper argues the need for the GPS/DSRC-based RRP systems to have an autonomous monitoring mechanism, since the operation of CCW applications is meant to augment safety on roads. The advantages of autonomous integrity monitoring are essential and integral to any safety-of-life system. The autonomous integrity monitoring framework proposed necessitates the RRP systems to detect/predict the unavailability of their sub-systems and of the integrity monitoring module itself, and, if available, to account for effects of data link delays and breakages of DSRC links, as well as of faulty measurement sources of GPS and/or integrated augmentation positioning systems, before the information used for safety warnings/alarms becomes unavailable, unreliable, inaccurate or misleading. Hence, a monitoring framework using a tight integration and correlation approach is proposed for instantaneous reliability assessment of the RRP systems. Ultimately, using the proposed framework, the RRP systems will provide timely alerts to users when the RRP solutions cannot be trusted or used for the intended operation.

Reframe QUT's evaluation framework : a case study of planning, policy and positioning leading to educational best practice

Every university in Australia has a set of policies that guide the institution in its educational practices, however, the policies are often developed in isolation to each other. Now imagine a space where policies are evidence-based, refined annually, cohesively interrelated, and meet stakeholders’ needs. Is this happenstance or the result of good planning? Culturally, Queensland University of Technology (QUT) is a risk-averse institution that takes pride in its financial solvency and is always keen to know “how are we going?” With a twenty-year history of annual reporting that assures the quality of course performance through multiple lines of evidence, QUT’s Learning and Teaching Unit went one step further and strategically aligned a suite of policies that take into consideration the needs of their stakeholders, collaborate with other areas across the institution and use multiple lines of evidence to inform curriculum decision-making. In QUT’s experience, strategic planning can lead to policy that is designed to meet stakeholders’ needs, not manage them; where decision-making is supported by evidence, not rhetoric; where all feedback is incorporated, not ignored; and where policies are cohesively interrelated, not isolated. While many may call this ‘policy nirvana’, QUT has positioned itself to demonstrate good educational practice through Reframe, its evaluation framework. In this case, best practice was achieved through the application of a theory of change and a design-led logic model that allows for transition to other institutions with different cultural specificity. The evaluation approach follows Seldin’s (2003) notion to offer depth and breadth to the evaluation framework along with Berk’s (2005) concept of multiple lines of evidence. In summary, this paper offers university executives, academics, planning and quality staff an opportunity to understand the critical steps that lead to strategic planning and design of evidence-based educational policy that positions a university for best practice in learning and teaching.

Scrutinising the other : incapacity, suspicion and manipulation in a death investigation

In common law countries like England, Australia, the USA and Canada, certain deaths come to be investigated through the coronial system. These include sudden, unnatural or suspicious deaths as well as those which appear to be the result of naturally occurring disease but the precise cause is unknown. When a reportable death occurs in Australia, a number of professional groups become involved in its investigation – police, coroners, pathologists and counsellors. While research has demonstrated the importance of training and education for staff in the context of criminal investigations – with its over-representation of vulnerable and marginalised populations – this is less likely to occur in the context of death investigations, despite such investigations also involving the over-representation of vulnerable populations. This paper, part of larger funded research on the decision-making of coronial professionals in the context of cultural and religious difference, explores the ways in which cultural and religious minority groups – in this case Islam, Judaism and Indigeneity – become differently positioned during the death investigation based upon how they are perceived as ‘other’. Our research raises three issues. First, positioning as ‘the other’ is dependent on the professional training of the staff member, with police and pathologists far more likely than coroners to be suspicious or ignorant of difference. Second, specific historical and contemporary events effect the Othering of religious and cultural difference. Third, the grieving practices associated with religious and cultural difference can be collectively Othered through their perceived opposition to modernity.

Positioning as a source of competitive advantage: Benchmarking Rotorua’s position as a domestic short break holiday destination

Travellers are spoilt by holiday choice, and yet will usually only seriously consider a few destinations during the decision process. With thousands of destination marketing organisations (DMOs) competing for attention, places are becoming increasingly substitutable. The study of destination competitiveness is an emerging field, and thesis contributes to an enhanced understanding by addressing three topics that have received relatively little attention in the tourism literature: destination positioning, the context of short break holidays, and domestic travel in New Zealand. A descriptive model of positioning as a source of competitive advantage is developed, and tested through 12 propositions. The destination of interest is Rotorua, which was arguably New Zealand’s first tourist destination. The market of interest is Auckland, which is Rotorua’s largest visitor market. Rotorua’s history is explored to identify factors that may have contributed to the destination’s current image in the Auckland market. A mix of qualitative and quantitative procedures is then utilised to determine Rotorua’s position, relative to a competing set of destinations. Based on an applied research problem, the thesis attempts to bridge the gap between academia and industry by providing useable results and benchmarks for five regional tourism organisations (RTOs). It is proposed that, in New Zealand, the domestic short break market represents a valuable opportunity not explicitly targeted by the competitive set of destinations. Conceptually, the thesis demonstrates the importance of analysing a destination’s competitive position, from the demand perspective, in a travel context; and then the value of comparing this ‘ideal’ position with that projected by the RTO. The thesis concludes Rotorua’s market position in the Auckland short break segment represents a source of comparative advantage, but is not congruent with the current promotional theme, which is being used in all markets. The findings also have implications for destinations beyond the context of the thesis. In particular, a new definition for ‘destination attractiveness’ is proposed, which warrants consideration in the design of future destination positioning analyses.

Positioning the nursing librarian on the wards: nursing grand rounds with a difference

The concept nursing grand rounds (NGR) has been reported in the nursing literature since the 1960s. Many of the reported initiatives are based on a presentation forum in the manner of medical grand rounds, as an approach to undergraduate education, or as a means to monitor patients. Among the points of difference in the design of the pilot project undertaken in a busy surgical ward to investigate the effectiveness of NGR in increasing nurses work satisfaction was the inclusion of the nursing librarian as an integral part of the NGR team and processes which previously has not reported in the literature. The nursing librarian’s role was to search the literature and find the best evidence on the predetermined patient topic prior to the NGR to enable the nurse presenting to integrate the research findings into the presentation of the patient. The nursing librarian attended each NGR and commented where appropriate on the level of evidence. Nurses discussed current practice and the impact the retrieved literature would have on patient care comparing best practice with current practice. Outcomes of this project include in some cases change in practice, change in culture where NGRs are now embedded into ward culture, NGR extended to other wards, enthusiasm for EBP, the initiation of a “super searcher” model where the nursing librarian is more of a consultant and develops the searching skills of nominated nurses who become the resource on the ward.

Reliability control of GNSS carrier-phase integer ambiguity resolution

This research investigates how to obtain accurate and reliable positioning results with global navigation satellite systems (GNSS). The work provides a theoretical framework for reliability control in GNSS carrier phase ambiguity resolution, which is the key technique for precise GNSS positioning in centimetre levels. The proposed approach includes identification and exclusion procedures of unreliable solutions and hypothesis tests, allowing the reliability of solutions to be controlled in the aspects of mathematical models, integer estimation and ambiguity acceptance tests. Extensive experimental results with both simulation and observed data sets effectively demonstrate the reliability performance characteristics based on the proposed theoretical framework and procedures.