Using mobile social media and GIS in health and place research

This paper presents new research methods that combine the use of location-based, social media on mobile phones with geographic information systems (GIS) to explore connections between people, place and health. It discusses the feasibility, limitations, and benefits of using these methods, which enable real-time, location-based, quantitative data to be collected on the recreation, consumption, and physical activity patterns of urban residents in Brisbane, Queensland. The study employs mechanisms already inherent in popular mobile social media applications (Facebook, Twitter and Foursquare) to collect this data. The research methods presented in this paper are innovative and potentially applicable to an increasing number of academic research areas, as well as to a growing range of service providers that benefit from monitoring consumer behaviour, and responding to emerging changes in these patterns and trends. The ability to both collect and map objective, real-time data about the consumption, leisure, recreation, and physical activity patterns amongst urban communities has direct implications for a range of research disciplines including media studies, advertising, health promotion, social marketing, public health inequalities, and urban design.

Genotype x culture media interaction effects on regeneration response of three indica rice cultivars

Interactive effects of genotypes with callus induction and regeneration media combinations on green plantlet regeneration response were studied for three indica rice (Oryza sativa L.) cultivars, IR-72, IR-54 and Karnal Local. Isolated mature-embryoswere used to derive scutellar callus and fifteen media combinations involvingMS, N6, R2, SK1 and some modifications were tested. Regeneration percentage as well as the shoot-bud induction frequency were influenced by genotype, callus induction medium, regeneration medium, interaction between genotype and the two media (callus induction and regeneration) as well the interaction between the callus induction medium and regeneration medium. Basal media combination of SK1m (callusing) and MS (regeneration) was found to be the best for cv. Karnal Local in which regeneration frequency of 88% and shoot-bud induction of 233% was observed. In IR-72, the highest regeneration frequency of 47.5% and shoot-bud induction frequency of 77% was obtained on MS-MS combination. In IR-54, highest regeneration frequency (25%) was recorded on MMS(N)-MMS(N) combination, whereas, highest frequency of shoot-bud induction (50%) was observed on MMS(S)-MS combination. Although genotype and the composition of the callus induction basal medium were the major determinants of regeneration response, an overall analysis of variation also revealed a significant interaction between the media used for de-differentiation (callusing) and re-differentiation (plantlet regeneration)

Emergent innovation through the co-evolution of informal and formal media economies

Well-established distinctions between amateur and professional are blurring as the impact of social media, changes in cultural consumption, and crises in copyright industries’ business models are felt across society and economy. I call this the increasingly rapid co-evolution of the formal market and informal household sectors and analyse it through the concept of ‘social network markets’ – individual choices are made on the basis of other’s choices and such networked preferencing is enhanced by the growing ubiquity of social media platforms. This may allow us better to understand sources of disruption and innovation in audiovisual production and distribution in wealthy Western markets which are as significant as those posed by informal practices outside the West. I examine what is happening around the monetization and professionalization of online video (YouTube, for example) and the socialization of professional production strategies (transmedia, for example) as innovation from the margins.

Performance evaluation of onsite sewage treatment : Evaluation of current research

Efficient management of domestic wastewater is a primary requirement for human well being. Failure to adequately address issues of wastewater collection, treatment and disposal can lead to adverse public health and environmental impacts. The increasing spread of urbanisation has led to the conversion of previously rural land into urban developments and the more intensive development of semi urban areas. However the provision of reticulated sewerage facilities has not kept pace with this expansion in urbanisation. This has resulted in a growing dependency on onsite sewage treatment. Though considered only as a temporary measure in the past, these systems are now considered as the most cost effective option and have become a permanent feature in some urban areas. This report is the first of a series of reports to be produced and is the outcome of a research project initiated by the Brisbane City Council. The primary objective of the research undertaken was to relate the treatment performance of onsite sewage treatment systems with soil conditions at site, with the emphasis being on septic tanks. This report consists of a ‘state of the art’ review of research undertaken in the arena of onsite sewage treatment. The evaluation of research brings together significant work undertaken locally and overseas. It focuses mainly on septic tanks in keeping with the primary objectives of the project. This report has acted as the springboard for the later field investigations and analysis undertaken as part of the project. Septic tanks still continue to be used widely due to their simplicity and low cost. Generally the treatment performance of septic tanks can be highly variable due to numerous factors, but a properly designed, operated and maintained septic tank can produce effluent of satisfactory quality. The reduction of hydraulic surges from washing machines and dishwashers, regular removal of accumulated septage and the elimination of harmful chemicals are some of the practices that can improve system performance considerably. The relative advantages of multi chamber over single chamber septic tanks is an issue that needs to be resolved in view of the conflicting research outcomes. In recent years, aerobic wastewater treatment systems (AWTS) have been gaining in popularity. This can be mainly attributed to the desire to avoid subsurface effluent disposal, which is the main cause of septic tank failure. The use of aerobic processes for treatment of wastewater and the disinfection of effluent prior to disposal is capable of producing effluent of a quality suitable for surface disposal. However the field performance of these has been disappointing. A significant number of these systems do not perform to stipulated standards and quality can be highly variable. This is primarily due to houseowner neglect or ignorance of correct operational and maintenance procedures. The other problems include greater susceptibility to shock loadings and sludge bulking. As identified in literature a number of design features can also contribute to this wide variation in quality. The other treatment processes in common use are the various types of filter systems. These include intermittent and recirculating sand filters. These systems too have their inherent advantages and disadvantages. Furthermore as in the case of aerobic systems, their performance is very much dependent on individual houseowner operation and maintenance practices. In recent years the use of biofilters has attracted research interest and particularly the use of peat. High removal rates of various wastewater pollutants have been reported in research literature. Despite these satisfactory results, leachate from peat has been reported in various studies. This is an issue that needs further investigations and as such biofilters can still be considered to be in the experimental stage. The use of other filter media such as absorbent plastic and bark has also been reported in literature. The safe and hygienic disposal of treated effluent is a matter of concern in the case of onsite sewage treatment. Subsurface disposal is the most common and the only option in the case of septic tank treatment. Soil is an excellent treatment medium if suitable conditions are present. The processes of sorption, filtration and oxidation can remove the various wastewater pollutants. The subsurface characteristics of the disposal area are among the most important parameters governing process performance. Therefore it is important that the soil and topographic conditions are taken into consideration in the design of the soil absorption system. Seepage trenches and beds are the common systems in use. Seepage pits or chambers can be used where subsurface conditions warrant, whilst above grade mounds have been recommended for a variety of difficult site conditions. All these systems have their inherent advantages and disadvantages and the preferable soil absorption system should be selected based on site characteristics. The use of gravel as in-fill for beds and trenches is open to question. It does not contribute to effluent treatment and has been shown to reduce the effective infiltrative surface area. This is due to physical obstruction and the migration of fines entrained in the gravel, into the soil matrix. The surface application of effluent is coming into increasing use with the advent of aerobic treatment systems. This has the advantage that treatment is undertaken on the upper soil horizons, which is chemically and biologically the most effective in effluent renovation. Numerous research studies have demonstrated the feasibility of this practice. However the overriding criteria is the quality of the effluent. It has to be of exceptionally good quality in order to ensure that there are no resulting public health impacts due to aerosol drift. This essentially is the main issue of concern, due to the unreliability of the effluent quality from aerobic systems. Secondly, it has also been found that most householders do not take adequate care in the operation of spray irrigation systems or in the maintenance of the irrigation area. Under these circumstances surface disposal of effluent should be approached with caution and would require appropriate householder education and stringent compliance requirements. However despite all this, the efficiency with which the process is undertaken will ultimately rest with the individual householder and this is where most concern rests. Greywater too should require similar considerations. Surface irrigation of greywater is currently being permitted in a number of local authority jurisdictions in Queensland. Considering the fact that greywater constitutes the largest fraction of the total wastewater generated in a household, it could be considered to be a potential resource. Unfortunately in most circumstances the only pretreatment that is required to be undertaken prior to reuse is the removal of oil and grease. This is an issue of concern as greywater can considered to be a weak to medium sewage as it contains primary pollutants such as BOD material and nutrients and may also include microbial contamination. Therefore its use for surface irrigation can pose a potential health risk. This is further compounded by the fact that most householders are unaware of the potential adverse impacts of indiscriminate greywater reuse. As in the case of blackwater effluent reuse, there have been suggestions that greywater should also be subjected to stringent guidelines. Under these circumstances the surface application of any wastewater requires careful consideration. The other option available for the disposal effluent is the use of evaporation systems. The use of evapotranspiration systems has been covered in this report. Research has shown that these systems are susceptible to a number of factors and in particular to climatic conditions. As such their applicability is location specific. Also the design of systems based solely on evapotranspiration is questionable. In order to ensure more reliability, the systems should be designed to include soil absorption. The successful use of these systems for intermittent usage has been noted in literature. Taking into consideration the issues discussed above, subsurface disposal of effluent is the safest under most conditions. This is provided the facility has been designed to accommodate site conditions. The main problem associated with subsurface disposal is the formation of a clogging mat on the infiltrative surfaces. Due to the formation of the clogging mat, the capacity of the soil to handle effluent is no longer governed by the soil’s hydraulic conductivity as measured by the percolation test, but rather by the infiltration rate through the clogged zone. The characteristics of the clogging mat have been shown to be influenced by various soil and effluent characteristics. Secondly, the mechanisms of clogging mat formation have been found to be influenced by various physical, chemical and biological processes. Biological clogging is the most common process taking place and occurs due to bacterial growth or its by-products reducing the soil pore diameters. Biological clogging is generally associated with anaerobic conditions. The formation of the clogging mat provides significant benefits. It acts as an efficient filter for the removal of microorganisms. Also as the clogging mat increases the hydraulic impedance to flow, unsaturated flow conditions will occur below the mat. This permits greater contact between effluent and soil particles thereby enhancing the purification process. This is particularly important in the case of highly permeable soils. However the adverse impacts of the clogging mat formation cannot be ignored as they can lead to significant reduction in the infiltration rate. This in fact is the most common cause of soil absorption systems failure. As the formation of the clogging mat is inevitable, it is important to ensure that it does not impede effluent infiltration beyond tolerable limits. Various strategies have been investigated to either control clogging mat formation or to remediate its severity. Intermittent dosing of effluent is one such strategy that has attracted considerable attention. Research conclusions with regard to short duration time intervals are contradictory. It has been claimed that the intermittent rest periods would result in the aerobic decomposition of the clogging mat leading to a subsequent increase in the infiltration rate. Contrary to this, it has also been claimed that short duration rest periods are insufficient to completely decompose the clogging mat, and the intermediate by-products that form as a result of aerobic processes would in fact lead to even more severe clogging. It has been further recommended that the rest periods should be much longer and should be in the range of about six months. This entails the provision of a second and alternating seepage bed. The other concepts that have been investigated are the design of the bed to meet the equilibrium infiltration rate that would eventuate after clogging mat formation; improved geometry such as the use of seepage trenches instead of beds; serial instead of parallel effluent distribution and low pressure dosing of effluent. The use of physical measures such as oxidation with hydrogen peroxide and replacement of the infiltration surface have been shown to be only of short-term benefit. Another issue of importance is the degree of pretreatment that should be provided to the effluent prior to subsurface application and the influence exerted by pollutant loadings on the clogging mat formation. Laboratory studies have shown that the total mass loadings of BOD and suspended solids are important factors in the formation of the clogging mat. It has also been found that the nature of the suspended solids is also an important factor. The finer particles from extended aeration systems when compared to those from septic tanks will penetrate deeper into the soil and hence will ultimately cause a more dense clogging mat. However the importance of improved pretreatment in clogging mat formation may need to be qualified in view of other research studies. It has also shown that effluent quality may be a factor in the case of highly permeable soils but this may not be the case with fine structured soils. The ultimate test of onsite sewage treatment system efficiency rests with the final disposal of effluent. The implication of system failure as evidenced from the surface ponding of effluent or the seepage of contaminants into the groundwater can be very serious as it can lead to environmental and public health impacts. Significant microbial contamination of surface and groundwater has been attributed to septic tank effluent. There are a number of documented instances of septic tank related waterborne disease outbreaks affecting large numbers of people. In a recent incident, the local authority was found liable for an outbreak of viral hepatitis A and not the individual septic tank owners as no action had been taken to remedy septic tank failure. This illustrates the responsibility placed on local authorities in terms of ensuring the proper operation of onsite sewage treatment systems. Even a properly functioning soil absorption system is only capable of removing phosphorus and microorganisms. The nitrogen remaining after plant uptake will not be retained in the soil column, but will instead gradually seep into the groundwater as nitrate. Conditions for nitrogen removal by denitrification are not generally present in a soil absorption bed. Dilution by groundwater is the only treatment available for reducing the nitrogen concentration to specified levels. Therefore based on subsurface conditions, this essentially entails a maximum allowable concentration of septic tanks in a given area. Unfortunately nitrogen is not the only wastewater pollutant of concern. Relatively long survival times and travel distances have been noted for microorganisms originating from soil absorption systems. This is likely to happen if saturated conditions persist under the soil absorption bed or due to surface runoff of effluent as a result of system failure. Soils have a finite capacity for the removal of phosphorus. Once this capacity is exceeded, phosphorus too will seep into the groundwater. The relatively high mobility of phosphorus in sandy soils have been noted in the literature. These issues have serious implications in the design and siting of soil absorption systems. It is not only important to ensure that the system design is based on subsurface conditions but also the density of these systems in given areas is a critical issue. This essentially involves the adoption of a land capability approach to determine the limitations of an individual site for onsite sewage disposal. The most limiting factor at a particular site would determine the overall capability classification for that site which would also dictate the type of effluent disposal method to be adopted.

Properties of hand-made clay balls used as a novel filter media

Filtration using granular media such as quarried sand, anthracite and granular activated carbon is a well-known technique used in both water and wastewater treatment. A relatively new prefiltration method called pebble matrix filtration (PMF) technology has been proved effective in treating high turbidity water during heavy rain periods that occur in many parts of the world. Sand and pebbles are the principal filter media used in PMF laboratory and pilot field trials conducted in the UK, Papua New Guinea and Serbia. However during first full-scale trials at a water treatment plant in Sri Lanka in 2008, problems were encountered in sourcing the required uniform size and shape of pebbles due to cost, scarcity and Government regulations on pebble dredging. As an alternative to pebbles, hand-made clay pebbles (balls) were fired in a kiln and their performance evaluated for the sustainability of the PMF system. These clay balls within a filter bed are subjected to stresses due to self-weight and overburden, therefore, it is important that clay balls should be able to withstand these stresses in water saturated conditions. In this paper, experimentally determined physical properties including compression failure load (Uniaxial Compressive Strength) and tensile strength at failure (theoretical) of hand-made clay balls are described. Hand-made clay balls fired between the kiln temperatures of 875oC to 960oC gave failure loads of between 3.0 kN and 7.1 kN. In another test when clay balls were fired to 1250oC the failure load was 35.0 kN compared to natural Scottish cobbles with an average failure load of 29.5 kN. The uniaxial compressive strength of clay balls obtained by experiment has been presented in terms of the tensile yield stress of clay balls. Based on the effective stress principle in soil mechanics, a method for the estimation of maximum theoretical load on clay balls used as filter media is proposed and compared with experimental failure loads.

Growing profitable or growing from profits : putting the horse in front of the cart?

Top lists of and praise for the economy's fastest growing firms abound in business media around the world. Similarly, in academic research there has been a tendency to equate firm growth with business success. This tendency appears to be particularly pronounced in-but not confined to­ entrepreneurship research. In this study we critically examine this tendency to portray firm growth as more or less universally favorable. While several theories suggest that growth drives profitability we first show that the available empirical evidence does not support the existence of a general, positive relation­ ship between growth and profitability. Using the theoretical lens of the Resource-Based View (RBV) we then argue that sound growth usually starts with achieving sufficient levels of profitability. In summary, our theoretical argument is as follows: In a population of SMEs, superior profitability is likely to be indicative of having built a resource-based competitive advantage. Building such a valuable and hard to-copy advantage may at first constrain growth. However, the underlying advantage itself and the financial resources generated through high profitability make it possible for firms in this situation to now achieve sound and sustainable growth - which may require building a series of temporary advantages- without having to sacrifice profitability. By contrast, when firms strive for high growth starting from low profitability, the latter often indicates lack of competitive advantage. Therefore growth must be achieved in head-to-head competition with equally attractive alternatives, leading to profitability deterioration rather than improvement. In addition, these low profitability firms are unlikely to be able to finance strategies toward building valuable and difficult-to-imitate advantages while growing.

Urban agriculture : a growing field of research workshop at INTERACT 2013

Growing food presents diverse challenges and opportunities within the urban environment. As cities develop, population density rises, land prices rise, and the opportunity to use land for traditional farming and gardening diminishes. Counter to this trend there are a growing number of both community gardens, city farms, guerrilla gardening, rooftop and vertical gardens, pot plants, windowsill herbs, and other balcony or backyard gardens cropping up in different cities, all with a purpose to produce food. This workshop brings to-gether practitioners and researchers in the field of urban agriculture and Hu-man-Computer Interaction to explore and opportunities for technology design to support the different forms of growing practice and foster local food production in cities. This 1-day workshop will serve as an active forum for researchers and practi-tioners across various fields including, but not limited to, agriculture and gar-dening, education, urban planning, human-computer interaction, and communi-ty engagement. This workshop has three distinct points of focus: i) Individual and small-scale gardening and food production, and how to connect like minded people who are involved in these practices to share their knowledge ii) Com-munities involved in urban agriculture, either through community gardens, city farms, or grassroots movements, often dependant on volunteer participation, providing the challenge of managing limited resources iii) Environmental and sociocultural sustainability through urban agriculture. The participants will have an opportunity to present their own work. This will be followed by a visit to a nearby city farm, which will provide a local context for a group design exercise. Finally the workshop will conclude with panel dis-cussions to review opportunities for further research and collaborations beyond the conference. For more information, please visit the workshop website, at http://www.urbaninformatics.net/resources/interact2013cfp/

New media and the transformation of higher education

One set of public institutions that has seen growing discussion about the transformative impact of new media technologies has been universities. The higher education sector, historically one of the more venerable and stable areas of public life, is now the subject of almost continuous speculation about whether it can continue in its current form during the 21st century. Digital media technologies are often seen as being at the forefront of such changes. It has been widely noted that moves towards a knowledge economy generates ‘skills-biased technological change’, that places a premium upon higher education qualifications, and that this earnings gap remains despite the continuing increase in the number of university graduates. As the demand for higher education continues to grow worldwide, there are new discussions about whether technologically-mediated education through new forms such as Massively Open Online Courses (MOOCs) are broadening access to quality learning, or severing the vital connection between teacher and student seen as integral to the learning process. This paper critically appraises such debates in the context of early 21st century higher education. It will discuss ten drivers of change in higher education, many of which are related to themes discussed elsewhere in this book, such as the impact of social media, globalization, and a knowledge economy. It will also consider the issues raised in navigating such developments from the perspective of the ‘Five P’s’: practical issues; personal issues; pedagogical issues; policy issues; and philosophical issues. It also includes a critical evaluation of MOOCs from the point of view of their educational qualities. It will conclude with the observation that while universities will continue to play a significant – and perhaps growing – role in the economy, society and culture, the issues raised about what Clayton Christensen and Henry Eyring term the ‘disruptive university’ (Christensen and Eyring 2011) are nonetheless pressing ones, and that cost and policy pressures in particular are likely to generate significant institutional transformations in higher education worldwide.

Social media and its impact on crisis communication: Case studies of Twitter use in emergency management in Australia and New Zealand

There is a growing awareness worldwide of the significance of social media to communication in times of both natural and human-created disasters and crises. While the media have long been used as a means of broadcasting messages to communities in times of crisis – bushfires, floods, earthquakes etc. – the significance of social media in enabling many-to-many communication through ubiquitous networked computing and mobile media devices is becoming increasingly important in the fields of disaster and emergency management. This paper undertakes an analysis of the uses made of social media during two recent natural disasters: the January 2011 floods in Brisbane and South-East Queensland in Australia, and the February 2011 earthquake in Christchurch, New Zealand. It is part of a wider project being undertaken by a research team based at the Queensland University of Technology in Brisbane, Australia, that is working with the Queensland Department of Community Safety (DCS) and the EIDOS Institute, and funded by the Australian Research Council (ARC) through its Linkages program. The project combines large-scale, quantitative social media tracking and analysis techniques with qualitative cultural analysis of communication efforts by citizens and officials, to enable both emergency management authorities and news media organisations to develop, implement, and evaluate new social media strategies for emergency communication.

Growing biodiverse carbon-rich forests

Regrowing forests on cleared land is a key strategy to achieve both biodiversity conservation and climate change mitigation globally. Maximizing these co-benefits, however, remains theoretically and technically challenging because of the complex relationship between carbon sequestration and biodiversity in forests, the strong influence of climate variability and landscape position on forest development, the large number of restoration strategies possible, and long time-frames needed to declare success. Through the synthesis of three decades of knowledge on forest dynamics and plant functional traits combined with decision science, we demonstrate that we cannot always maximize carbon sequestration by simply increasing the functional trait diversity of trees planted. The relationships between plant functional diversity, carbon sequestration rates above-ground and in the soil are dependent on climate and landscape positions. We show how to manage ‘identities’ and ‘complementarities’ between plant functional traits in order to achieve systematically maximal co-benefits in various climate and landscape contexts. We provide examples of optimal planting and thinning rules that satisfy this ecological strategy and guide the restoration of forests that are rich in both carbon and plant functional diversity. Our framework provides the first mechanistic approach for generating decision-making rules that can be used to manage forests for multiple objectives, and supports joined carbon credit and biodiversity conservation initiatives, such as Reducing Emissions from Deforestation and forest Degradation REDD+. The decision framework can also be linked to species distribution models and socio-economic models in order to find restoration solutions that maximize simultaneously biodiversity, carbon stocks and other ecosystem services across landscapes. Our study provides the foundation for developing and testing cost-effective and adaptable forest management rules to achieve biodiversity, carbon sequestration and other socio-economic co-benefits under global change.

The role of the non-government organisation (NGO) in practicing editorial photography in a globalised media environment

The news media industry has changed dramatically in the last 10 to 20 years into a global business with ever increasing attention being devoted to entertainment and celebrity. There is also a growing reliance on images produced by citizens (citizen photojournalism) by media outlets and publishers. It is widely acknowledged this has shrunk publication opportunities for professional photographers undertaking editorial projects. As a result, photographers are increasingly relying on non-government organisations (NGOs) to gain access to photographing issues and events in developing countries and to expand their economic and portfolio opportunities. This increase of photographers working for and alongside NGOs has given rise to a new genre of editorial photography I call NGO Reportage. By way of a case study, an exploration of this new genre reveals important issues for photographers working alongside NGO’s and examines the constructed narratives of images contained within these emerging practices.

The role of Non-Government Organisations (NGOS) in practising editorial photography in a globalised media environment

The news media industry has changed dramatically into a global business with ever-increasing attention being devoted to entertainment and celebrity across the last 10–20 years. There has also been a growing reliance on images produced by citizens (citizen photojournalism), by media outlets and publishers. It is widely acknowledged that in tandem these changes have shrunk publication opportunities for professional photographers undertaking editorial projects. As a result, photographers are increasingly relying on non-government organisations (NGOs) to gain access to photographing issues and events in developing countries and to expand their economic and portfolio opportunities. This increase in photographers working for and alongside NGOs has given rise to a new genre of editorial photography which I call NGO Reportage. By way of a case study, an exploration of this new genre reveals important issues for photographers working with NGOs and examines the constructed narratives of images contained within these emerging practices.

New media [Fourth Edition]

This is the fourth edition of New Media: An Introduction, with the previous editions being published by Oxford University Press in 2002, 2005 and 2008. As the first edition of the book published in the 2010s, every chapter has been comprehensively revised, and there are new chapters on: • Online News and the Future of Journalism (Chapter 7) • New Media and the Transformation of Higher Education (Chapter 10) • Online Activism and Networked Politics (Chapter 12). It has retained popular features of the third edition, including the twenty key concepts in new media (Chapter 2) and illustrative case studies to assist with teaching new media. The case studies in the book cover: the global internet; Wikipedia; transmedia storytelling; Media Studies 2.0; the games industry and exploitation; video games and violence; WikiLeaks; the innovator’s dilemma; massive open online courses (MOOCs); Creative Commons; the Barack Obama Presidential campaigns; and the Arab Spring. Several major changes in the media environment since the publication of the third edition stand out. Of particular importance has been the rise of social media platforms such as Facebook, Twitter and YouTube, which draw out even more strongly the features of the internet as networked and participatory media, with a range of implications across the economy, society and culture. In addition, the political implications of new media have become more apparent with a range of social media-based political campaigns, from Barack Obama’s successful Presidential election campaigns to the Occupy movements and the Arab Spring. At the same time, the subsequent developments of politics in these and other cases has drawn attention to the limitations of thinking about the politics or the public sphere in technologically determinist ways. When the first edition of New Media was published in 2002, the concept of new media was seen as being largely about the internet as it was accessed from personal computers. The subsequent decade has seen a proliferation of platforms and devices: we now access media in all forms from our phones and other mobile platforms, therefore we seen television and the internet increasingly converging, and we see a growing uncoupling of digital media content and delivery platforms. While this has a range of implications for media law and policy, from convergent media policy to copyright reform, governments and policy-makers are struggling to adapt to such seismic shifts from mass communications media to convergent social media. The internet is no longer primarily a Western-based medium. Two-thirds of the world’s internet users are now outside of Europe and North America; three-quarters of internet users use languages other than English; and three-quarters of the world’s mobile cellular phone subscriptions are in developing nations. It is also apparent that conducting discussions about how to develop new media technologies and discussions about their cultural and creative content can no longer be separated. Discussions of broadband strategies and the knowledge economy need to be increasingly joined with those concerning the creative industries and the creative economy.