Functional characterization of acetylated Brazil nut (Bertholletia excelsa HBK) kernel globulin

Defatted Brazil nut kernel flour, a rich source of high quality proteins, is presently being utilized in the formulation of animal feeds. One of the possible ways to improve its utilization for human consumption is through improvement in its functional properties. In the present study, changes in some of the functional properties of Brazil nut kernel globulin were evaluated after acetylation at 58.6, 66.2 and 75.3% levels. The solubility of acetylated globulin was improved above pH 6.0 but was reduced in the pH range of 3.0-4.0. Water and oil absorption capacity, as well as the viscosity increased with increase in the level of acetylation. Level of modification also influenced the emulsifying capacity: decreased at pH 3.0, but increased at pH 7.0 and 9.0. Highest emulsion activity (approximately 62.2%) was observed at pH 3.0 followed by pH 9.0 and pH 7.0 and least (about 11.8%) at pH 5.0. Emulsion stability also followed similar behavior as that of emulsion activity.

Production and partial characterization of lipase from Penicillium verrucosum obtained by submerged fermentation of conventional and industrial media

The growing interest in lipase production is related to the potential biotechnological applications that these enzymes present. Current studies on lipase production by submerged fermentation involve the use of agro-industrial residues aiming at increasing economic attractiveness. Based on these aspects, the objective of this work was to investigate lipase production by Penicillium verrucosum in submerged fermentation using a conventional medium based on peptone, yeast extract, NaCl and olive oil, and an industrial medium based on corn steep liquor, Prodex Lac (yeast hydrolysate), NaCl and olive oil, as well as to characterize the crude enzymatic extracts obtained. Kinetics of lipase production was evaluated and the highest enzymatic activities, of 3.15 and 2.22 U.mL-1, were observed when conventional and industrial media were used, respectively. The enzymatic extract showed optimal activity in the range from 30 to 40 °C and at pH 7.0. Although the industrial medium presents economical advantages over the conventional medium, the presence of agro-industrial residues rich in nitrogen and other important nutrients seemed to contribute to a reduction in lipase activity.

Chemical characterization and antimicrobial activity of essential oils of salvia L. species

In this work, the essential oils of S. officinalis, S. sclarea, S. lavandulifolia and S. triloba were chemically analyzed by gas chromatography coupled to a mass spectrometry detector (GC/MSD), and their antimicrobial activity was tested against 10 microorganisms using the disk diffusion method and the Minimum Inhibitory Concentration (MIC) technique. The following major compounds were identified in the essential oils: α - and β-thujone, camphor and 1,8-cineole, except in S. sclarea, where linalool, linalyl acetate and α-terpineol were the major constituents. The antimicrobial activity showed significant differences (p < 0.05) only when obtained by the MIC method. Gram-positive microorganisms presented larger sensitivity for the essential oils. The lowest MIC was observed when Staphylococcus aureus was exposed to 2.31 mg.mL-1 of S. lavandulifolia essential oil, while the highest MIC value was obtained when Shigella flexneri was exposed to 9.25 mg.mL-1 of the same essential oil, thus demonstrating that this essential oil may be effective as a bacteriostatic agent against Gram-positive microorganisms.

Characterization of microalgae native to Quebec for biofuel production.

La production de biodiésel par des microalgues est intéressante à plusieurs niveaux. Dans le premier chapitre, un éventail de pour et contres concernant l’utilisation de microalgues pour la production de biocarburant sont ici révisés. La culture d’algues peut s'effectuer en utilisant des terres non-arables, de l’eau non-potable et des nutriments de base. De plus, la biomasse produite par les algues est considérablement plus importante que celle de plantes vasculaires. Plusieurs espèces on le contenu lipidique en forme de triacylglycérols (TAGs), qui peut correspondre jusqu'à 30% - 40% du poids sec de la biomasse. Ces proportions sont considérablement plus élevées que celui des huiles contenues dans les graines actuellement utilisées pour le biodiésel de première génération. Par contre, une production pratique et peu couteuse de biocarburant par des microalgues requiert de surpasser plusieurs obstacles. Ceci inclut le développement de systèmes de culture efficace à faible coût, de techniques de récupération requérant peu d’énergie, et de méthodes d’extraction et de conversion de l’huile non-dommageables pour l’environnement et peu couteuses. Le deuxième chapitre explore l'une des questions importantes soulevées dans le premier chapitre: la sélection d'une souche pour la culture. Une collection de souches de microalgues d'eau douce indigène au Québec a été établi et examiné au niveau de la diversité physiologique. Cette collection est composée de cent souches, que apparaissaient très hétérogènes en terme de croissance lorsque mises en culture à 10±2 °C ou 22±2 °C sur un effluent secondaire d’une usine municipale de traitement des eaux usées (EU), défini comme milieu Bold's Basal Medium (BBM). Des diagrammes de dispersion ont été utilisés pour étudier la diversité physiologique au sein de la collection, montrant plusieurs résultats intéressants. Il y avait une dispersion appréciable dans les taux de croissance selon les différents types de milieux et indépendamment de la température. De manière intéressante, en considérant que tous les isolats avaient initialement été enrichis sur milieu BBM, la distribution était plutôt symétrique autour de la ligne d’iso-croissance, suggérant que l’enrichissement sur BBM n’a pas semblé biaiser la croissance des souches sur ce milieu par rapport aux EU. Également, considérant que les isolats avaient d’abord été enrichis à 22°C, il est assez surprenant que la distribution de taux de croissance spécifiques soit aussi symétrique autour de la ligne d’iso-croissance, avec grossièrement des nombres égaux d’isolats de part et d’autre. Ainsi, l’enrichissement à 22°C ne semble pas biaiser les cellules vers une croissance à cette température plutôt que vers 10°C. Les diagrammes de dispersion obtenus lorsque le pourcentage en lipides de cultures sur BBM ont été comparées à des cultures ayant poussé sur EU soit à 10°C ou 22°C rendent évident que la production de lipides est favorisée par la culture sur EU aux deux températures, et que la production lipidique ne semble pas particulièrement plus favorisée par l’une ou l’autre de ces températures. Lorsque la collection a été examinée pour y déceler des différences avec le site d’échantillonnage, une analyse statistique a montré grossièrement que le même degré de diversité physiologique était retrouvé dans les échantillons des deux différents sites. Le troisième chapitre a poursuivi l'évaluation de la culture d'algues au Québec. L’utilisation de déchets industriels riches en nutriments minéraux et en sources de carbone pour augmenter la biomasse finale en microalgues et le produit lipidique à faible coût est une stratégie importante pour rendre viable la technologie des biocarburants par les algues. Par l’utilisation de souches de la collection de microalgues de l’Université de Montréal, ce rapport montre pour la première fois que des souches de microalgues peuvent pousser en présence de xylose, la source de carbone majoritairement retrouvée dans les eaux usées provenant des usines de pâte et papier, avec une hausse du taux de croissance de 2,8 fois par rapport à la croissance photoautotrophe, atteignant jusqu’à µ=1,1/jour. En présence de glycérol, les taux de croissance atteignaient des valeurs aussi élevées que µ=1,52/jour. La production lipidique augmentait jusqu’à 370% en présence de glycérol et 180% avec le xylose pour la souche LB1H10, démontrant que cette souche est appropriée pour le développement ultérieur de biocarburants en culture mixotrophe. L'ajout de xylose en cultures d'algues a montré certains effets inattendus. Le quatrième chapitre de ce travail a porté à comprendre ces effets sur la croissance des microalgues et la production de lipides. Quatre souches sauvages indigènes ont été obersvées quotidiennement, avant et après l’ajout de xylose, par cytométrie en flux. Avec quelques souches de Chlorella, l’ajout de xylose induisait une hausse rapide de l’accumulation de lipide (jusqu’à 3,3 fois) pendant les premières six à douze heures. Aux temps subséquents, les cellules montraient une diminution du contenu en chlorophylle, de leur taille et de leur nombre. Par contre, l’unique membre de la famille des Scenedesmaceae avait la capacité de profiter de la présence de cette source de carbone sous culture mixotrophe ou hétérotrophe sans effet négatif apparent. Ces résultats suggèrent que le xylose puisse être utilisé avant la récolte afin de stimuler l’augmentation du contenu lipidique de la culture d’algues, soit en système de culture continu ou à deux étapes, permettant la biorestauration des eaux usées provenant de l’industrie des pâtes et papiers. Le cinquième chapitre aborde une autre déché industriel important: le dioxyde de carbone et les gaz à effet de serre. Plus de la moitié du dioxyde de carbone qui est émis dans l'atmosphère chaque jour est dégagé par un processus stationnaire, soit pour la production d’électricité ou pour la fabrication industrielle. La libération de CO2 par ces sources pourrait être atténuée grâce à la biorestauration avec microalgues, une matière première putative pour les biocarburants. Néanmoins, toutes les cheminées dégagent un gaz différent, et la sélection des souches d'algues est vitale. Ainsi, ce travail propose l'utilisation d’un état de site particulier pour la bioprospection de souches d'algues pour être utilisé dans le processus de biorestauration. Les résultats montrent que l'utilisation d'un processus d'enrichissement simple lors de l'étape d'isolement peut sélectionner des souches qui étaient en moyenne 43,2% mieux performantes dans la production de biomasse que les souches isolées par des méthodes traditionnelles. Les souches isolées dans ce travail étaient capables d'assimiler le dioxyde de carbone à un taux supérieur à la moyenne, comparées à des résultats récents de la littérature.

Physicochemical and Biochemical Characterization of Enzymes Immobilized on lnorganic Matrices

Biotechnology is currently considered as a useful altemative to conventional process technology in industrial and catalytic fields. The increasing awareness of the need to create green and sustainable production processes in all fields of chemistry has stimulated materials scientists to search for innovative catalysts supports. lmmobilization of enzymes in inorganic matrices is very useful in practical applications due to the preserved stability and catalytic activity of the immobilized enzymes under extreme conditions. Nanostructured inorganic, organic or hybrid organic-inorganic nanocomposites present paramount advantages to facilitate integration and miniaturization of the devices (nanotechnologies), thus affording a direct connection between the inorganic, organic and biological worlds. These properties, combined with good chemical stability, make them competent candidates for designed biocatalysts, protein-separation devices, drug delivery systems, and biosensors Aluininosilicate clays and layered double hydroxides, displaying, respectively, cation and anion exchange properties, were found to be attractive materials for immobilization because of their hydrophilic, swelling and porosity properties, as well as their mechanical and thermal stability.The aim of this study is the replacement of inorganic catalysts by immobilized lipases to obtain purer and healthier products.Mesocellular silica foams were synthesized by oil-in-water microemulsion templating route and were functionalized with silane and glutaraldehyde. " The experimental results from IR spectroscopy and elemental analysis demonstrated the presence of immobilized lipase and also functionalisation with silane and glutaraldehyde on the supports.The present work is a comprehensive study on enzymatic synthesis of butyl isobutyrate through esterification reaction using lipase immobilized onto mesocellular siliceous foams and montmorillonite K-10 via adsorption and covalent binding. Moreover, the irnrnobil-ization does not modify the nature of the kinetic mechanism proposed which is of the Bi-Bi Ping—Pong type with inhibition by n-butanol. The immobilized biocatalyst can be commercially exploited for the synthesis of other short chain flavor esters. Mesocellular silica foams (MCF) were synthesized by microemusion templating method via two different routes (hydrothermal and room temperature). and were functionalized with silane and glutaraldehyde. Candida rugosa lipase was adsorbed onto MCF silica and clay using heptane as the coupling medium for reactions in non-aqueous media. I From XRD results, a slight broadening and lowering of d spacing values after immobilization and modification was observed in the case of MCF 160 and MCF35 but there was no change in the d-spacing in the case of K-10 which showed that the enzymes are adsorbed only on the external surface. This was further confirmed from the nitrogen adsorption measurements

Synthesis, Characterization and Catalytic Activity of Nanocrystalline Ceria Modified With Zirconia

The use of catalysts in chemical and refining processes has increased rapidly since 1945, when oil began to replace coal as the most important industrial raw material. Catalysis has a major impact on the quality of human life as well as economic development. The demand for catalysts is still increasing since catalysis is looked up as a solution to eliminate or replace polluting processes. Metal oxides represent one of the most important and widely employed classes of solid catalysts. Much effort has been spent in the preparation, characterization and application of metal oxides. Recently, great interest has been devoted to the cerium dioxide (CeO2) containing materials due to their broad range of applications in various fields, ranging from catalysis to ceramics, fuel cell technologies, gas sensors, solid state electrolytes, ceramic biomaterials, etc., in addition to the classical application of CeO2 as an additive in the so-called three way catalysts (TWC) for automotive exhaust treatment. Moreover, it can promote water gas shift and steam reforming reactions, favours catalytic activity at the interfacial metal-support sites. The solid solutions of ceria with Group IV transitional-metals deserve particular attention for their applicability in various technologically important catalytic processes. Mesoporous CeO2−ZrO2 solid solutions have been reported to be employed in various reactions which include CO oxidation, soot oxidation, water-gas shift reaction, and so on. Inspired by the unique and promising characteristics of ceria based mixed oxides and solid solutions for various applications, we have selected ceria-zirconia oxides for our studies. The focus of the work is the synthesis and investigation of the structural and catalytic properties of modified and pure ceria-zirconia mixed oxide.

Perfil de exposición ocupacional a polvo de cemento y sílice cristalina en procesos de cementación y Fracturamiento hidráulico en el sector Oil & Gas en Colombia: un estudio retrospectivo (2009 – 2013).

La exposición a polvo de cemento y sílice ha sido estudiada por años en países como Estados Unidos y Canadá, cuando el polvo de cemento se inhala durante diferentes actividades, se puede ocasionar afectación del tracto respiratorio de las personas expuestas. El estudio “Perfil de exposición ocupacional a polvo de cemento y sílice cristalina en procesos de cementación y Fracturamiento hidráulico en el sector Oil & Gas en Colombia: un estudio retrospectivo (2009 – 2013).” Permitió identificar las actividades funcionales que representan un riesgo potencial por la presencia de partículas aerosuspendidas, analizar una base de datos que reúne cerca de 18298 registros de evaluaciones higiénicas en el sector Oil & Gas, realizar posteriormente el cálculo de material particulado en la fracción respirable y sílice cristalina aplicables para cada proceso y el procesamiento de los datos estadísticamente, confrontar estos estimadores estadísticos con los valores límites permisibles definidos por el gobierno nacional, los resultados incluyeron la caracterización de un perfil de exposición ocupacional por actividad funcional para el proceso de cementación, la identificación de los trabajadores más expuestos según las condiciones de exposición y cuáles de estos perfiles superan los límites máximos permisibles para un turno de trabajo de 12 horas, esta información permitirá a los profesionales de la salud e higiene laboral orientar actividades de seguimiento, vigilancia y control en los grupos de exposición similar específicos. Para el proceso de fracturamiento hidráulico los datos encontrados no fueron estadísticamente significativos.

Geophysical investigation using resistivity and GPR methods: a case study of a lubricant oil waste disposal area in the city of Ribeiro Preto, So Paulo, Brazil

Geophysics has been shown to be effective in identifying areas contaminated by waste disposal, contributing to the greater efficiency of soundings programs and the installation of monitoring wells. In the study area, four trenches were constructed with a total volume of about 25,000 m(3). They were almost totally filled with re-refined lubricating oil waste for approximately 25 years. No protection liners were used in the bottoms and laterals of the disposal trenches. The purpose of this work is to evaluate the potential of the resistivity and ground penetrating radar (GPR) methods in characterizing the contamination of this lubricant oil waste disposal area in Ribeiro Preto, SP, situated on the geological domain of the basalt spills of the Serra Geral Formation and the sandstones of the Botucatu Formation. Geophysical results were shown in 2D profiles. The geophysical methods used enabled the identification of geophysical anomalies, which characterized the contamination produced by the trenches filled with lubricant oil waste. Conductive anomalies (smaller than 185 Omega m) immediately below the trenches suggest the action of bacteria in the hydrocarbons, as has been observed in several sites contaminated by hydrocarbons in previously reported cases in the literature. It was also possible to define the geometry of the trenches, as evidenced by the GPR method. Direct sampling (chemical analysis of the soil and the water in the monitoring well) confirmed the contamination. In the soil analysis, low concentrations of several polycyclic aromatic hydrocarbons (PAHs) were found, mainly naphthalene and phenanthrene. In the water samples, an analysis verified contamination of the groundwater by lead (Pb). The geophysical methods used in the investigation provided an excellent tool for environmental characterization in this study of a lubricant oil waste disposal area, and could be applied in the study of similar areas.

Biosynthesis and characterization of biodegradable Poly(3-hydroxybutyrate) from renewable sources

Poly(3-hydroxybutyrate) was produced in fed-batch cultures of Ralstonia eutropha DSM 428 and Alcaligenes latus ATCC 29712 on a mineral medium with different carbon sources such as sucrose, sodium lactate, lactic acid, soybean oil and fatty acid. The bacteria converted the different carbon sources supplied into P3HB. The best results were obtained when lactate or soybean oil were supplied as the sole carbon source. The range of number average molar mass (Mn) for the polymers, analyzed by Gel Permeation Chromatography was 1.65 to 0.79 x 10(5) g mol(-1). FTIR spectroscopy revealed a characteristic absorbance associated with polyester structures. The crystallinity degree, determinate from X-ray diffractograms, was about 69% in all synthesized polymers. The thermal properties associated to semicrystalline polymers indicated a glass transition at 0.1 degrees C and a melting point at about 175 degrees C and enthalpy of 63-89 J g(-1). The (1)H-NMR and (13)C-NMR spectra of the polymers were in agreement with the calculated chemical shifts associated with P3HB structures.

Oxide surface modification: Synthesis and characterization of zirconia-coated alumina

Four aluminas were used as Supports for impregnation with a zirconium oxide with the aim to achieve a coating, without phase separation, between Support and modifier. The Supports were impregnated with different concentrations Of zirconium aqueous resin, obtained through the polymeric precursor method. After impregnation the samples were calcined and then characterized by XRD, which led to identification of crystalline zirconia in different concentrations from each support used. Using a simple geometric model the maximum amount Of Surface modifier Oxide required for the complete coating of a support with a layer of unit cells was estimated. According to this estimate, only the support should be identified below the limit proposed and crystalline zirconium oxide Should be identified above this limit when a complete coating is reached. The results obtained From XRD agree with the estimated values and to confirm the coating, the samples were also characterized by EDS/STEM, HRTEM, XPS, and XAS. The results showed that the zirconium oxide oil the Surface of alumina Support reached the coating in the limit of 15 Zr nm(-2), without the formation of the ZrO(2) phase. (c) 2009 Elsevier Inc. All rights reserved.

Characterization of organic matter in sediment cores of the Todos os Santos Bay, Bahia, Brazil, by elemental analysis and (13)C NMR

The impact of human activity on the sediments of Todos os Santos Bay in Brazil was evaluated by elemental analysis and (13)C Nuclear Magnetic Resonance ((13)C NMR). This article reports a study of six sediment cores collected at different depths and regions of Todos os Santos Bay. The elemental profiles of cores collected on the eastern side of Frades Island suggest an abrupt change in the sedimentation regime. Auto-regressive Integrated Moving Average (ARIMA) analysis corroborates this result. The range of depths of the cores corresponds to about 50 years ago, coinciding with the implantation of major onshore industrial projects in the region. Principal Component Analysis of the (13)C NMR spectra clearly differentiates sediment samples closer to the Subae estuary, which have high contents of terrestrial organic matter, from those closer to a local oil refinery. The results presented in this article illustrate several important aspects of environmental impact of human activity on this bay. (C) 2011 Elsevier Ltd. All rights reserved.

Isolation, chemical composition and anti-inflammatory activity of Copaifera langsdorffii desf. fruit peels essential oil according to successive hydrodistillations

In this study, the isolation and characterization of chemical composition of C. langsdorffii (copaiba) fruit peel volatile oil from Alfenas - MG was carried out according to successive hydrodistillations, likewise the anti-inflammatory activity was evaluated by rat paw edema model. The chemical composition of the oil was determined by GC-MS analysis. The major components were (E)-caryophyllene, germacrene B, 1,5-epoxysalvial-4(14)-ene, caryophyllene oxide and isospathulenol. The inflammatory process was inhibited in 39 +/- 6 % (p<0.05, Tukey-Kramer) by one sample of essential oil. The C. langsdorffii fruit peel is a rich source of essential oil (3.8% w/w), and due to potential industrial interest of its components this ecotype presents feasible crop seeking productivity and it could constitutes in a good alternative to the sustainable use of this specie.

Structure and Applications of a Rhamnolipid Surfactant Produced in Soybean Oil Waste

Soybean oil soapstock was utilized as an alternative carbon source for the production of rhamnolipids by Pseudomonas aeruginosa LBI strain. The chemical composition and properties of the rhamnolipid mixture obtained were determined to define its potential applications. The chemical characterization of the rhamnolipid has revealed the presence of ten different homologues. The monorhamnolipid RhaC(10)C(10) and the dirhamnolipid Rha(2)C(10)C(10) were the main components of the mixture that showed predominance of 44% and 29%, respectively, after 144-h of cultivation. The biosurfactant was able to form stable emulsions with several hydrocarbons and showed excellent emulsification for soybean oil and chicken fat (100%). The rhamnolipid removed 67% of crude oil present in sand samples and presented antimicrobial activity against Bacillus cereus and Mucor miehei at 64 mu g/mL and inhibition of Neurospora crassa, Staphylococcus aureus, and Micrococcus luteus at 256 mu g/mL. The results demonstrated that the rhamnolipid produced in soybean oil soapstock can be useful in environmental and food industry applications.

Nuclear magnetic resonance characterization of metabolite disorder in orange trees caused by citrus sudden death disease

Citrus sudden death (CSD) is a new disease of sweet orange and mandarin trees grafted on Rangpur lime and Citrus volkameriana rootstocks. It was first seen in Brazil in 1999, and has since been detected in more than four million trees. The CSD causal agent is unknown and the current hypothesis involves a virus similar to Citrus tristeza virus or a new virus named Citrus sudden death-associated virus. CSD symptoms include generalized foliar discoloration, defoliation and root death, and, in most cases, it can cause tree death. One of the unique characteristics of CSD disease is the presence of a yellow stain in the rootstock bark near the bud union. This region also undergoes profound anatomical changes. In this study, we analyse the metabolic disorder caused by CSD in the bark of sweet orange grafted on Rangpur lime by nuclear magnetic resonance (NMR) spectroscopy and imaging. The imaging results show the presence of a large amount of non-functional phloem in the rootstock bark of affected plants. The spectroscopic analysis shows a high content of triacylglyceride and sucrose, which may be related to phloem blockage close to the bud union. We also propose that, without knowing the causal CSD agent, the determination of oil content in rootstock bark by low-resolution NMR can be used as a complementary method for CSD diagnosis, screening about 300 samples per hour.

Characterization of Post-Consumer PET after Removal of the Original Surface: Influence of Raw Material

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)