Experimental investigation on low-temperature fatigue crack propagation in offshore structural steel A131 under random sea ice loading

An apparatus of low-temperature controlling for fatigue experiments and its crack measuring system were developed and used for offshore structural steel A131 under conditions of both low temperature and random sea ice. The experimental procedures and data processing were described, and a universal random data processing software for FCP under spectrum loading was written. Many specific features of random ice-induced FCP which differed with constant amplitude FCP behaviours were proposed and temperature effect on ice-induced FCP was pointed out with an easily neglected aspect in designing for platforms in sea ice emphasized. In the end, differences of FCP behaviours between sea ice and ocean wave were presented.

Efficient tunable diode-pumped Yb : LYSO laser

We demonstrated efficient laser action of a new ytterbium-doped oxyorthosilicate crystal Yb:LuYSiO5 ( Yb: LYSO) under high-power diode-pumping. The spectroscopic features and laser performance of the alloyed oxyorthosilicate crystal are compared with those of ytterbium-doped lutetium and yttrium oxyorthosilicates. In the continuous-wave laser operation of Yb: LYSO, a maximal slope efficiency of 96% and output power of 7.8 W were respectively achieved with different pump sources. The Yb: LYSO laser exhibits not only little sensitivity to the pump wavelength drift but also a broad tunability. By using a dispersive prism as the intracavity tuning element, we demonstrated that the continuous-wave Yb: LYSO laser exhibit a continuous tunability in the spectral range of 1014-1091 nm. (c) 2006 Optical Society of America.

Duration of unassisted swimming activity for spotted dolphin (Stenella attenuata) calves: implications for mother-calf separation during tuna purse-seine sets

Size-related differences in power production and swim speed duration may contribute to the observed deficit of nursing calves in relation to lactating females killed in sets by tuna purse-seiners in the eastern tropical Pacific Ocean (ETP). Power production and swim-speed duration were estimated for northeastern spotted dolphins (Stenella attenuata), the species (neonate through adult) most often captured by the fishery. Power required by neonates to swim unassisted was 3.6 times that required of an adult to swim the same speed. Estimated unassisted burst speed for neonates is only about 3 m/s compared to about 6 m/s for adults. Estimated long-term sustainable speed is about 1 m/s for neonates compared to about 2.5 m/s for adults. Weight-specific power requirements decrease as dolphin calves increase in size, but power estimates for 2-year-old spotted dolphin calves are still about 40% higher than power estimates for adults, to maintain the same speed. These estimated differences between calves and adults are conservative because the calculations do not include accommodation for reduced aerobic capacity in dolphin calves compared to adults. Discrepancies in power production are probably ameliorated under normal circumstances by calves drafting next to their mothers, and by employing burst-coast or leap-burst-coast swimming, but the relatively high speeds associated with evasion behaviors during and after tuna sets likely diminish use of these energy-saving strategies by calves.

Beam propagation modelling of tapered waveguide lasers

A dynamic beam propagation model allows design optimization of high power low divergence tapered waveguide lasers. The model is extended to include spatially-resolved temperature profiles and a temperature dependent gain. Using this model, design parameters such as the optimum facet reflectivity, taper angle, and waveguide dimension can be calculated for low far-field divergence and high continuous wave power.

Use of a high-temperature superconducting coil for magnetic energy storage

A high temperature superconducting magnetic energy storage device (SMES) has been realised using a 350 m-long BSCCO tape wound as a pancake coil. The coil is mounted on a cryocooler allowing temperatures down to 17.2 K to be achieved. The temperature dependence of coil electrical resistance R(T) shows a superconducting transition at T 102.5 K. Measurements of the V(I) characteristics were performed at several temperatures between 17.2 K and 101.5 K to obtain the temperature dependence of the critical current (using a 1 νV/cm criterion). Critical currents were found to exceed 100 A for T < 30 K. An electronic DC-DC converter was built in order to control the energy flow in and out of the superconducting coil. The converter consists of a MOS transistor bridge switching at a 80 kHz frequency and controlled with standard Pulse Width Modulation (PWM) techniques. The system was tested using a 30 V squared wave power supply as bridge input voltage. The coil current, the bridge input and output voltages were recorded simultaneously. Using a 10 A setpoint current in the superconducting coil, the whole system (coil + DC-DC converter) can provide a stable output voltage showing uninterruptible power supply (UPS) capabilities over 1 s. © 2006 IOP Publishing Ltd.

波浪能海水淡化的应用研究

简要介绍了“十五”期问在广东省汕尾市研建的波浪能海水淡化系统的组成和工作原理。为了验证波浪能海水淡化装置运行的实用性和可靠性，在国内外波浪能海水淡化研究的基础上，对汕尾波浪能海水淡化装置进行了不同操作压力情况下的试验研究。研究结果表明，随着高压海水压力的升高，产出淡水量会明显增加，淡水质量提高，装置产出淡水的能耗较低。

Depth inversion in coastal water based on SAR image of waves

Wave-number spectrum technique is proposed to retrieve coastal water depths by means of Synthetic Aperture Radar (SAR) image of waves. Based on the general dispersion relation of ocean waves, the wavelength changes of a surface wave over varying water depths can be derived from SAR. Approaching the analysis of SAR images of waves and using the general dispersion relation of ocean waves, this indirect technique of remote sensing bathymetry has been applied to a coastal region of Xiapu in Fujian Province, China. Results show that this technique is suitable for the coastal waters especially for the near-shore regions with variable water depths.

合成孔径雷达提取海面风、浪信息研究

传统海洋测量方法例如岸基观测站、船只和浮标等方式只能对海面进行单点观测，存在很多不足之处：观测点少，只能获得有限的点的资料，无法得到大范围的海面信息；费用较高，无法大范围的密集观测；传统方法受天气影响较大，无法长时间的连续观测；星载合成孔径雷达能全天候、全天时、高分辨率对海面成像，能实现多波段、多极化、多视角得观测海面，提供大范围、高精度的实时动态海面信息。同时，这种全天候、全天时和高分辨率观测海洋的优势是可见光和红外传感器所没有的。总之研究如何从SAR影像中有效地获取海面信息具有重要的科学和实用意义。 自从1978年Seasat卫星发射以来SAR图像就广泛的应用于海洋要素的反演如海面风场、波高、平均周期。其中对海面风场的反演研究的最多，一般的方法是首先对SAR图像进行快速傅立叶变换得到SAR图像谱，通过图像谱的峰值信息能够得到具有180°模糊的风向，利用SAR图像的条纹或者浮标等外部信息来消除180°模糊确定风向，其次把风向和图像的正交后向散射截面数值(NRCS)带入经验函数CMOD4通过迭代计算得到风速。这种方法得到的海面风场需要外部信息的辅助，不利于大范围的业务化的反演海面风场。因此本文试图直接通过SAR图像来反演海面风场而不利用其他外部信息的帮助。2002年3月1日发射的ENVISAT卫星所获得的ASAR图像具有不同于ERS系列的SAR图像的新特点：不同入射角的情况下获得ASAR图片、双极化数据以及可以获得更宽的带幅的图像。双极化数据可以同时地提供同极化和交错极化的影像，两种极化的数据能够增加分辨目标的能力和提供目标更多的信息，这方面的优势也使得利用双极化的数据来消除SAR图像反演风场中的180º模糊问题提供了可能。本文推导了利用双极化的ASAR图像反演海面风场的新函数，该函数是在同极化和交错极化函数的基础上推导出来的，有效的消除了只用一副ASAR图片反演风场所固有的180º模糊现象。风速和风向的反演结果与Quikscat数据之间的均方根误差分别为0.53 m/s和2.21º。该方法与传统方法的比较可以看出新方法与浮标数据以及Quikscat数据符合的更好。 利用SAR图像来反演海浪的波高也是一个研究的比较多的领域。比较传统的方法是由SAR图像得到的海浪谱计算出波高，目前国际上比较流行的SAR图像反演海浪谱的模式有两种：一种是Hasselmann（1991）提出的在Max－Planck Institute（MPI）发展起来的方法，Hasselmann（1996）进行了改进和完善。另一种是Mastenbroek和de Valk（2000）提出的半参数化反演方法。这两种方法的最主要的缺点就是需要引进外部信息(WAM模式结果或者散射计的风的信息)来消除图像所固有的180°方向模糊问题。而本文应用的经验函数方法(CWAVE)不需要引进任何外部信息而直接得到海浪的重要参数－有效波高(Hs)，输入该经验函数的参数主要有：波模式图像的雷达截面、图像方差以及由SAR谱得到的20个参数。这些参数的选择是通过逐步回归方法进行筛选的。CWAVE经验函数的系数是通过6000幅全球分布的ERS-2波模式的图像谱拟合同时同地点的WAM模式结果得到的。利用CWAVE经验函数反演了1998年9月到2000年11月两年多的全球接近一百万的ERS-2 SAR图像的有效波高，利用NOAA浮标数据对反演结果进行了验证，他们之间的相关系数为0.83, 均方根误差为0.61m，偏差为0.02 m；反演结果也与欧洲中长期预报中心(ECMWF)的ERA-40有效波高资料和高度计资料进行了比较，结果表明该方法是通过SAR图像反演Hs的一种有效方法。 SAR的反演结果也应用于有效波高的非线性统计分布的研究。结合动力学和随机统计学原理推导了海面高度、波高和有效波高的非线性统计分布，同时利用了NOAA浮标数据、华师大的波高数据以及SAR的有效波高数据分别对推导出的非线性统计分布函数进行了检验。 SAR的结果也用来反演新的风浪成长关系： ，与已有的风浪成长关系的比较表明该成长关系与已有的结果比较一致。

星载散射计海浪参数提取方法研究

海浪是重要的海洋动力环境参数之一,迄今为止，合成孔径雷达是唯一测量海浪谱的传感器，然而，由于它存在方位波数的截止和能量短缺，限制了其应用。卫星高度计可以测量全球有效波高，但其二维空间分辨率低，其应用也受到了限制。因此，发展一个能够全天候全天时测量海浪参数的有效方法迫在眉睫。 本论文希望利用散射计提取波浪参数,主要研究工作如下： 1、利用二尺度理论模拟了涌浪对C-波段后向散射系数的影响，并与前人在L-波段 和 Ku-波段模拟的结果进行了比较，验证了涌浪对雷达后向散射截面的影响随雷达频率增加而减小，同样也随入射角增大而减小。 2、根据浮标和散射计匹配的数据发现，当海浪参数和雷达入射角给定后，雷达后向散射截面同方位角的关系显示二阶余弦函数关系，为此建立了一种BP神经网络波浪参数反演模式。 3、分别发展了ERS卫星和QuikSCAT卫星散射计资料反演海浪参数的方法，利用NDBC浮标数据分别对它们反演的波浪参数进行了验证。并发现风浪占优势时反演有效波高的结果好于涌浪占优势；C-波段反演有效波高的结果要好于Ku波段,且在Ku波段，水平极化好于垂直极化；波陡反演的结果不受海况影响。 关键词：散射计，风浪，涌浪，有效波高，平均周期，波陡，神经网络

干涉合成孔径雷达海浪遥感理论与应用研究

干涉合成孔径雷达 (Interferometric Synthetic Aperture Radar，InSAR) 是以合成孔径雷达复数据提取的相位为信息源获取地表三维信息和海表散射体运动信息的新型微波成像雷达。 InSAR通过两幅天线同时观测 (单轨模式)，或两次近平行的观测 (重复轨道模式)，获取地面或海面同一景观的复图像对。20世纪90年代以来，InSAR陆地和海洋研究成为微波遥感的热点，广泛应用于地表变形监测、南极冰流测量、地面或海面慢速运动目标检测等领域。 近年来，国际上逐渐应用机载顺轨或交轨干涉合成孔径雷达进行海表面流速测量以及海面波成像机制研究。相对于传统单天线合成孔径雷达 (Synthetic Aperture Radar, SAR)，双天线干涉合成孔径雷达 (InSAR) 测量海表面波有着独特的优势： (1) InSAR复图像的相位近似正比于海面散射体的径向速度，这种内在的成像机制提供了直接测量海表面动态运动的机会。 (2) 真实孔径雷达调制传递函数几乎对InSAR相位图像没有影响，而对传统SAR图像影响较大。 基于干涉合成孔径雷达测量海浪的优势，本文做了一些干涉合成孔径雷达海浪遥感理论与应用研究工作，主要内容大致可归纳如下： (1)基于新建立的顺轨干涉合成孔径雷达 (Along-Track Interferometric Synthetic Aperture Radar，ATI-SAR) 相位谱与海浪谱之间的非线性映射关系，通过数值模拟研究了不同雷达参数和海况参数对应的ATI-SAR相位谱。数值模拟结果表明：距离速度比率、雷达入射角、天线间距和有效波高和波长比率是影响ATI-SAR海浪成像的重要因素。进一步，利用机载X波段水平极化相位图像和机载C波段水平极化相位图像谱结合方向波骑士浮标测量的海浪方向谱验证了ATI-SAR相位谱与海浪谱之间的非线性映射关系。结果显示用前向映射关系计算的相位谱与实际观测的相位谱较为一致，二者相关系数总体大于0.6，而且对成像非线性不敏感. (2)建立了包含海表面高度和速度聚束的交轨干涉合成孔径雷达 (Across-Track Interferometric Synthetic Aperture Radar，XTI-SAR) 涌浪干涉相位模型，得到了涌浪成像的解析表达式，进一步研究了XTI-SAR沿方位向传播的涌浪成像机制。定义二次谐波振幅与基波振幅比率来表征成像非线性，通过比较XTI-SAR和ATI-SAR相位的二阶调和分量，分析不同海况和干涉SAR参数情况下的数值模拟，结果表明：当速度聚束弱时，XTI-SAR相位比ATI-SAR相位具有较强的非线性，ATI-SAR比XTI-SAR更适合测量海浪。当速度聚束强时，XTI-SAR相位比ATI-SAR相位具有较弱的非线性，XTI-SAR比ATI-SAR更适合测量海浪。 (3)基于包含海表面高度和速度聚束的交轨干涉合成孔径雷达 (XTI-SAR) 涌浪干涉相位模型，结合多维高斯变量的特征函数方法建立了新的XTI-SAR相位谱与海浪谱非线性积分变换。新积分变换不同于Bao (1999) 建立的积分变换，两者形式上区别在于新积分变换中包含了长波径向轨道速度一阶倒数项。数值模拟显示：通常情况下，长波径向轨道速度一阶倒数项不能忽略。进一步，我们针对不同雷达参数和海况结合新非线积分变换对XTI-SAR海浪成像进行了数值模拟，结果表明：同顺轨干涉合成孔径雷达 (ATI-SAR) 海浪成像一致，距离速度比率 和有效波高与波长比率 是影响XTI-SAR海浪成像的重要因子。 (4)基于新的ATI-SAR相位谱与海浪谱之间的非线性映射关系，发展了利用ATI-SAR相位图像反演海浪方向谱的参数化反演模式，并由此得到海浪波长、波向和有效波高。反演结果与现场浮标观测结果比较一致。相对于其它反演模式，参数化反演模式的优点在于：(1) 不需要任何附加信息如初猜海浪谱、散射计提供的风速风向等信息。 (2) 不需要对相位图像进行辐射定标，可以由反演的海浪谱直接计算有效波高。(3) 反演结束后还可以得到成像区域的局地风速信息。因此，参数化反演模式可以实现风、浪信息的联合反演。

Electrical machine characterisation and analysis for renewable energy applications

There has been an increased use of the Doubly-Fed Induction Machine (DFIM) in ac drive applications in recent times, particularly in the field of renewable energy systems and other high power variable-speed drives. The DFIM is widely regarded as the optimal generation system for both onshore and offshore wind turbines and has also been considered in wave power applications. Wind power generation is the most mature renewable technology. However, wave energy has attracted a large interest recently as the potential for power extraction is very significant. Various wave energy converter (WEC) technologies currently exist with the oscillating water column (OWC) type converter being one of the most advanced. There are fundemental differences in the power profile of the pneumatic power supplied by the OWC WEC and that of a wind turbine and this causes significant challenges in the selection and rating of electrical generators for the OWC devises. The thesis initially aims to provide an accurate per-phase equivalent circuit model of the DFIM by investigating various characterisation testing procedures. Novel testing methodologies based on the series-coupling tests is employed and is found to provide a more accurate representation of the DFIM than the standard IEEE testing methods because the series-coupling tests provide a direct method of determining the equivalent-circuit resistances and inductances of the machine. A second novel method known as the extended short-circuit test is also presented and investigated as an alternative characterisation method. Experimental results on a 1.1 kW DFIM and a 30 kW DFIM utilising the various characterisation procedures are presented in the thesis. The various test methods are analysed and validated through comparison of model predictions and torque-versus-speed curves for each induction machine. Sensitivity analysis is also used as a means of quantifying the effect of experimental error on the results taken from each of the testing procedures and is used to determine the suitability of the test procedures for characterising each of the devices. The series-coupling differential test is demonstrated to be the optimum test. The research then focuses on the OWC WEC and the modelling of this device. A software model is implemented based on data obtained from a scaled prototype device situated at the Irish test site. Test data from the electrical system of the device is analysed and this data is used to develop a performance curve for the air turbine utilised in the WEC. This performance curve was applied in a software model to represent the turbine in the electro-mechanical system and the software results are validated by the measured electrical output data from the prototype test device. Finally, once both the DFIM and OWC WEC power take-off system have been modeled succesfully, an investigation of the application of the DFIM to the OWC WEC model is carried out to determine the electrical machine rating required for the pulsating power derived from OWC WEC device. Thermal analysis of a 30 kW induction machine is carried out using a first-order thermal model. The simulations quantify the limits of operation of the machine and enable thedevelopment of rating requirements for the electrical generation system of the OWC WEC. The thesis can be considered to have three sections. The first section of the thesis contains Chapters 2 and 3 and focuses on the accurate characterisation of the doubly-fed induction machine using various testing procedures. The second section, containing Chapter 4, concentrates on the modelling of the OWC WEC power-takeoff with particular focus on the Wells turbine. Validation of this model is carried out through comparision of simulations and experimental measurements. The third section of the thesis utilises the OWC WEC model from Chapter 4 with a 30 kW induction machine model to determine the optimum device rating for the specified machine. Simulations are carried out to perform thermal analysis of the machine to give a general insight into electrical machine rating for an OWC WEC device.

The effect of doubled CO2 and model basic state biases on the monsoon-ENSO system. II: Changing ENSO regimes

Integrations of a fully-coupled climate model with and without flux adjustments in the equatorial oceans are performed under 2×CO2 conditions to explore in more detail the impact of increased greenhouse gas forcing on the monsoon-ENSO system. When flux adjustments are used to correct some systematic model biases, ENSO behaviour in the modelled future climate features distinct irregular and periodic (biennial) regimes. Comparison with the observed record yields some consistency with ENSO modes primarily based on air-sea interaction and those dependent on basinwide ocean wave dynamics. Simple theory is also used to draw analogies between the regimes and irregular (stochastically forced) and self-excited oscillations respectively. Periodic behaviour is also found in the Asian-Australian monsoon system, part of an overall biennial tendency of the model under these conditions related to strong monsoon forcing and increased coupling between the Indian and Pacific Oceans. The tropospheric biennial oscillation (TBO) thus serves as a useful descriptor for the coupled monsoon-ENSO system in this case. The presence of obvious regime changes in the monsoon-ENSO system on interdecadal timescales, when using flux adjustments, suggests there may be greater uncertainty in projections of future climate, although further modelling studies are required to confirm the realism and cause of such changes.

Latching control of a point absorber

In this paper the authors investigate the use of optimal control techniques for improving the efficiency of the power conversion system in a point absorber wave power device. A simple mathematical model of the system is developed and an optimal control strategy for power generation is determined. They describe an algorithm for solving the problem numerically, provided the incident wave force is given. The results show that the performance of the device is significantly improved with the handwidth of the response being widened by the control strategy.