Discursos e a construção do "real": um estudo do processo de formação e institucionalização do campo da biotecnologia

Comprehension of the processes of formation of new organizational fields is the main objective that stimulated the theoretical reflection and empirical research that I present in this paper. My intention here is to uphold the potential for the application of seemingly dichotomous perspectives in terms of the objectivity/subjectivity dimension in the comprehension of the objective in question. The contribution of Foucault, with his concept of discourse, is linked to the proposal of critical constructivism represented by Latour and studies of science and technology. Juxtaposing these perspectives, I examined the dynamics of the biotechnological field on the basis of the dialectic of movements of demarcation/circularity, which is basically a simultaneous movement of (dis)construction of the boundaries of a field. The dialectic of demarcation/circularity is made up of the set of relations established between heterogeneous elements ¿ institutions, economic and social processes, behavioral patterns, systems of norms, techniques, types of classification, forms of characterization, in other words it finds ways of emerging in the course of discursive formations. This theoretical proposal ¿ which incorporates an overlooked dimension in institutional analysis, especially in organization studies (power) ¿ has the advantage of contributing to enhancing comprehension of the dynamics of institutionalization. By proposing that the institutional processes arise within discursive fields, the argument put forward is that such processes contribute to the productivity of the power relations in these fields. In empirical terms, I conducted a descriptive and exploratory research directed at the biotechnology sector. The research was based on a historical perspective, since the analysis spans the period from the origins of genetic science (beginning of the 20th century) through to recent developments in biotechnology in the USA (beginning of the 21st century). The USA was chosen as the locus of research, principally due to the fact that structuring of the field of biotechnology originated in that country, subsequently spreading to other countries around the world. Starting from this theoretical and methodological framework, three discursive formations are highlighted: organization, information and network. Each of the discursive formations is characterized by a dominant set of discourses that prepare the ground for the appearance and (trans)formation of the focus-objects under analysis. In this process, organizations appear in at least two ways: as boundary-organizations ¿ which are important for understanding the movement of the approximation of different discursive domains ¿ and as new organizations, which accompany the (trans)formation of new fields, whereby prevailing discourses materialize at a given historical moment and contribute to breathe life into new discourses, which in turn spark off new power relations. Among the conclusions of this work, I would highlight the following: questioning the 'organizational' dimension of the fields; the relationship revealed not only between the discourses and the institutionalized practices, but also with the process of construction of legitimacy; and the redefinition of the concept of organizations, based on new conceptions relating to the limits of the topic, the objectivity/subjectivity, and space/time dichotomy.

Determinação do comportamento carga-recalque de sapatas em solos residuais a partir de ensaios SPT

O comportamento carga-recalque de sapatas assentes em solos residuais é perfeitamente representado a partir da interpretação de provas de carga. No entanto, a execução de provas de carga em fundações reais ou em placa é indesejada pela maioria dos construtores e contratantes por razões de cronograma e custo. Por outro lado, sondagens de simples reconhecimento (SPT) são de rápida execução, exigidas pela normalização vigente de projeto e execução de fundações (ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS, 1996) e largamente utilizados na geotecnia nacional, sendo tal ensaio normalizado pela da norma NBR 6.484/2001. Deste modo, nesta pesquisa, pretende-se estabelecer uma metodologia semi-empírica para estimar o comportamento de sapatas assentes em solos residuais a partir de correlação estatística de resultados de sondagens de simples reconhecimento (NSPT) com a tensão admissível e os recalques sob tensão de trabalho, obtidos a partir de resultados de provas de carga em placa ou fundações reais assentes em solos residuais. Deste modo, a partir de retro-análise de um conjunto de resultados de provas de carga executados em diferentes solos residuais, encontrados na literatura, e o uso de conceitos de estatística, obteve-se diversas correlações que possibilitam estimar o comportamento tensão-recalque deste tipo de solo através dos resultados médios dos ensaios de SPT Como resultados destas correlações foram obtidas equações para a previsão de recalques e tensão admissível de fundações assentes sobre solos residuais, bem como do módulo de elasticidade de tais solos. As equações de estimativa de recalques são dependentes, além dos resultados de SPT, da geometria da fundação e da tensão aplicada. Já as equações para a estimativa da tensão admissível e módulo de elasticidade são dependentes somente dos valores médios do ensaio de SPT. E finalmente, para testar as equações desenvolvidas, foi realizada uma análise “Classe A” no comportamento carga-recalque de três provas de carga realizadas em locais diferentes, mostrando a eficiência da metodologia desenvolvida para a determinação da tensão admissível e dos recalques em sapatas sob a aplicação de carga de trabalho assentes em solos residuais.

Estado da arte da S.C.I.E. desde 1951 a 2008 e a sua aplicação como especialidade da engenharia

No âmbito da dissertação apresentada à Universidade da Madeira para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Engenharia Civil, foi desenvolvida uma pesquisa na área da Segurança Contra Incêndio em Edifícios, abreviadamente designada por SCIE, desde 1951 a 2008 e a sua aplicação como especialidade da Engenharia, designadamente ao nível da fenomenologia da combustão, no que concerne à evolução histórica dos organismos, legislação, normas técnicas e factos históricos marcantes ao nível socioeconómico. Foi feita uma abordagem às normas europeias e à sua transcrição para as normas portuguesas devido ao factor político com a entrada de Portugal na C.E.E. em 1986. Neste sentido, este trabalho pretende dar a conhecer a evolução da SCIE em Portugal e exemplifica a sua aplicação como especialidade obrigatória para o licenciamento de qualquer edifício, independentemente da sua Utilização-Tipo à excepção dos estabelecimentos prisionais, instalações das forças armadas, espaços destinados ao armazenamento de explosivos e pirotecnia. O estudo de caso escolhido foi de um edifício de utilização mista da 4ª Categoria de Risco. Identificaram-se as diferenças entre a legislação anterior e o novo Diploma, a evolução histórica e as medidas a implementar no estudo de caso, apresentado no (anexo II), de acordo com o novo quadro legislativo.

Análise do licenciamento ambiental como instrumento de política do meio ambiente no Rio Grande do Norte Período 1992-2003

This analysis on the ambient licensing is based on a research that identifies the fragilities and advances of the application of this instrument of politics of the environment in the ambient politics of the Rio Grande do Norte, in the period of 1992 the 2003. The isolated urban area of Búzios, situated in the City of Nísia Floresta/RN, situated in the eastern coast of the State, where concentrates the boarding of the ambient question as a matter in the Brazilian process of urbanization, over all the institutionalization and implementation of the ambient licensing. They are distinguished in the used methodology in consultation to the diverse involved social segments with the ambient subject in study, the example of the managers, technician and specialists, as well as the application of the legislation and norms techniques, the forms of appropriation of the common wealth and the procedures of ambient licensing of the competent agencies. The results of the research designate that the ambient licensing while instrument of the ambient politics is one of the alternatives more efficient as techniques in the process of sustainable development, since it is beyond the prerogatives to conciliate the activities and enterprises with the conservation of the environmental resources and natural benefits to the societies. In the RN one evidenced progress in the ambient legislation and the instructions techniques, and that the imperfections and limitations in the system of ambient licensing are not directly on to the instruments, but in the implementation of mechanisms of the ambient agencies. This because they do not make use of operational structure to apply in practical and established abilities, as an ambient management, institutional joint and deliberations of the State Counselor for Environment

Investigação e avaliação da toxicidade aguda dos agrotóxicos mais utilizados no cinturão verde da Grande Natal (RN, Brasil) para o peixe-zebra (Danio rerio Hamilton Buchanan, 1822, Teleostei, Cyprinidae

The objectives of this research were to investigate the agrotoxic most used in the Gramorezinho region in the green belt of Natal, and to evaluate the acute toxicity of these, based on the LC50-48h values estimated in tests for Danio rerio, internationally used as test organism. The acute toxicity tests were performed under laboratory conditions, according to standardized methods (ABNT/NBR/15088/04) for this species. The LC50-48h estimated to Tamaron BR was 352.89 mg.L-1, which characterizes that as practically non-toxic, according to toxicological classes cited by Zucker. For Decis 25EC, the LC50-48h estimated was 0.0004156 mg.L-1 (4.156 X 10-4 mg.L-1), which classifies it as highly toxic to this species

Avaliação da conformidade de blocos cerâmicos para alvenaria de vedação produzidas na Região Integrada de Desenvolvimento da Grande Teresina

This research presents an outlook of the industries of red ceramic in the region next to the city of Teresina and an analysis of the ceramic products producted in this pole. The microregion investigated possesses 13 boroughs where were identified 32 ceramic in operation, being that 24 are located in Teresina, the ceramic region more important of Piauí, 1 is located in the city of Miguel Leão and 7 is located in Timon city that belongs to the state of Maranhão. The majority of ceramics are pulverized in these two cities, Teresina and Timon , responsible by a largely production independent of distance between fabric and consumer market. Furthermore, there is an artisanal production realized in other boroughs, mainly manual conformation bricks, where are producted diverse types of handicraft and ceramics utilitarian. The objective of this research is to evalue the conformity of ceramic blocks for brick of obstruction made by red ceramic industry of microregion at studying, verifying their pontentialities and adequacy in terms of production. In this research universe made a search of ceramic industries related to the Foundation CEPRO (Foundation Center of Research Social and Economic of Piauí). For the analysis of the ceramic products , were colected 60 crude bricks sample in three industries for their characterization, and 39 burned bricks sample for the Evaluation of Conformity. The results of the characterization made reached a accetptable standard in all formulations and temperature studied. The burned samples were applied to the geometric, physical and mechanical assays according to the ABNT standards (Brazilian Association of Technical Standards). The results of the physical assays showed that all the samples are at the same band recommended by standard. However, through the geometric assays just two industries did not present results according to the standard, due to lack of control in their process such as in their equipments. Taking into account the mechanical properties, only one industry investigated was not according to the standard

Efeito da incorporação de diatomita na estabilidade e permeabilidade de compósitos cimentíceos espumados aplicados a poços de petróleo

Lightweight oilwell cement slurries have been recently studied as a mean to improve zonal isolation and sheath-porous formation adherence. Foamed slurries consisting of Portland cement and air-entraining admixtures have become an interesting option for this application. The loss in hydrostatic pressure as a consequence of cement hydration results in the expansion of the air bubbles entrapped in the cement matrix, thus improving the sheath-porous formation contact. Consequently, slurries are able to better retain their water to complete the hydration process. The main objective of the present study was to evaluate the effect of the addition of an air-entraining admixture on the density, stability and permeability of composite slurries containing Portland cement and diatomite as light mineral load. Successful formulations are potential cementing materials for low fracture gradient oilwells. The experimental procedures used for slurry preparation and characterization were based on the American Petroleum Institute and ABNT guidelines Slurries containing a pre-established concentration of the air-entraining admixture and different contents of diatomite were prepared aiming at final densities of 13 to 15 lb/gal. The results revealed that the reduction of 15 to 25% of the density of the slurries did not significantly affect their strength. The addition of both diatomite and the air-entraining admixture increased the viscosity of the slurry providing better air-bubble retention in the volume of the slurry. Stable slurries depicted bottom to top density variation of less than 1.0 lb/gal and length reduction of the stability sample of 5.86 mm. Finally, permeability coefficient values between 0.617 and 0.406 mD were obtained. Therefore, lightweight oilwell cement slurries depicting a satisfactory set of physicochemical and mechanical properties can be formulated using a combination of diatomite and air-entraining admixtures for low fracture gradient oilwells

Estudo da adição de resíduo de scheelita em matriz cerâmica: formulação, propriedades físicas e microestrutura

Extractivism mineral is considered an activity highly degrading, due to the large volume of material that he moves in the form of ore and residues. The vast majority of mining companies do not show any technology or economically viable application that will allow the recycling of mineral residue, these being launched in areas receiving located the "open skies" degrade the environment. In Rio Grande do Norte to the production of ceramic red restricts their activities to the production of products such as: solid bricks, ceramic blocks, tiles, among others. Seeking to unite experiences and technical information that favor sustainable development, with important benefits to the construction sector and civil society in general, the present work studies the incorporation of the residue of scheelite in ceramic matrix kaolinitic, coming from the municipality of Boa Saúde - RN, in percentage of 5 %, 10 %, 20 %, 30% 40% and 50 %, by evaluating its microstructure, physical properties and formulation. The raw materials were characterized through the trials of X ray fluorescence, Diffraction of X rays, Differential Thermal Analysis and Termogravimetric Analysis. The samples were formed and fired at temperatures of 850o, 900o, 1000o, 1050o, 1100o, 1150o and 1200 oC, with isotherm of 1 hour and heating rate of 10 oC/min. Assays were performed technological of loss to fire, Water Absorption, Apparent Porosity, Apparent Density, Mass Loss in Fire and Bending Resistance; in addition to the Scanning Electron Microscopy, analyzing their physical and mechanical properties. The use of residue of scheelite in ceramic mass kaolinitic provided a final product with technological properties that meet the technical standards for the production of bricks and roofing tiles, with the percentage of 20% of waste that showed the best results

Formulação de bloco intertravado cerâmico com adição de resíduos urbanos e industriais

The production of waste from urban and industrial activities is one of the factors of environmental contamination and has aroused attention of the scientific community, in the sense of its reuse. On the other hand, the city of Salvador/Ba, with approximately 262 channels, responsible for storm water runoff, produces every year, by the intervention of cleaning and clearing channels, a significant volume of sediments (dredged mud), and thus an appropriate methodology for their final destination. This study aims to assess the influence of incorporation of these tailings in arrays of clay for production of interlocked block ceramic, also known as ceramic paver. All the raw materials from the metropolitan region of Salvador (RMS) were characterized by x-ray fluorescence, x-ray diffraction, thermal analysis (TG and TDA), particle size analysis and dilatometry. With the use of statistical experimental planning technique, ternary diagram was defined in the study region and the analyzed formulations. The specimens were prepared with dimensions of 60x20x5mm³, by uniaxial pressing of 30 MPa and after sintering at temperatures of 900°, 1000º and 1100ºC the technological properties were evaluated: linear shrinkage, water absorption, apparent porosity, apparent specifies mass, flexural rupture and module. For the uniaxial compression strength used cylindrical probe body with Ø 50 mm. The standard mass (MP) was prepared with 90% by weight of clay and 10% by weight of Channel sediment (SCP), not being verified significant variations in the properties of the final product. With the incorporation of 10% by weight of manganese residue (PFM) and 10% by weight of the Ceramic waste (RCB) in the mass default, in addition to adjusting the plasticity due to less waste clay content, provided increased linear firing shrinkage, due the significant concentration of K2O, forming liquid phase at low temperature, contributing to decreased porosity and mechanical resistance, being 92,5 MPa maximum compressive strength verified. After extract test leachate and soluble, the piece containing 10% of the PFM, was classified as non-hazardous and inert material according to NBR10004/04 ABNT. The results showed the feasibility on using waste, SCP, RCB and PFM clay mass, at temperatures above 900ºC, paver ceramic production, according to the specifications of the technical standards, so that to exceed the 10% of the PFM, it becomes imperative to conduct studies of environmental impacts

Formulação e caracterização de pastas espumadas por incorporação de ar e estabilizantes minerais

Cementing operations may occur at various stages of the life cycle of an oil well since its construction until its definitive abandonment. There are some situations in which the interest zones are depleted or have low fracture pressure. In such cases, the adoption of lowdensity cement slurries is an efficient solution. To this end, there are basically three ways to reduce the density of cement slurries: using microspheres, water extending additives or foamed cement. The objective of this study is to formulate, to study and to characterize lowdensity foamed cement, using an air entrainment surfactant with vermiculite or diatomite as water extenders and stabilizers. The methodology consists on preparation and evaluation of the slurries under the American Petroleum Institute (API) and the Brazilian Association of Technical Standards (ABNT) guidelines. Based on calculated densities between 13 and 15 ppg (1.559 and 1.799 g/cm3), the slurries were prepared with fixed surfactant concentration, varying the concentrations of vermiculite and diatomite and were compared with the base slurries. The results of plastic viscosity, yield point and gel strength and the compressive strength for 24 h showed that the slurries presented suitable rheology and mechanical strength for cementing operations in oil wells, and had their densities reduced between 8.40 and 11.89 ppg (1.007 and 1.426 g/cm3). The conclusion is that is possible, under atmospheric conditions, to obtain light weighted foamed cement slurries with satisfactory rheological and mechanical properties by means of air entrainment and mineral additions with extenders and stabilizers effects. The slurries have great potential for cementing operations; applicability in deep wells, in low fracture gradient formations and in depleted zones and bring cost savings by reducing the cementing consumption

Desenvolvimento de pastas leves utilizando incorporadores de ar para aplicação em poços de petróleo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Avaliação do nível de ruído em colhedoras combinadas

O presente trabalho teve o objetivo de determinar os níveis de pressão sonora nas cabines de colhedoras combinadas, por meio do uso de um medidor de nível de pressão sonora. Foram avaliadas as colhedoras New Holland TC-57, SLC 6200 e Massey Ferguson 3640, sendo determinado o nível de ruído na cabine do operador. O delineamento adotado foi o inteiramente casualizado, com 12 tratamentos e três repetições. Os resultados obtidos evidenciam que todas as colhedoras estudadas apresentaram ruído acima do nível máximo estabelecido pelas normas técnicas.

Incidência da varíola, causada por Asperisporium caricae, em folhas de mamoeiros submetidos ao manejo orgânico, em diferentes ambientes de cultivo

Mudas de mamoeiro da cultivar Baixinho de Santa Amália foram transplantadas para covas de 40x60x40 cm, em áreas de três estruturas contíguas: (a) estufa sombreada (cobertura de plástico), (b) estufa sombreada + sombrite (cobertura adicional de sombrite com 30% de sombreamento sobre o plástico) e (c) telado (cobertura exclusiva de sombrite 30%). Ao lado de tais estruturas foi implantada uma área de cultivo de mamoeiro em ambiente natural. Os tratos culturais aplicados foram os condizentes às normas técnicas vigentes na agricultura orgânica. As irrigações foram procedidas com mangueira plástica, evitando-se molhar folhas e frutos. Aos 45 dias pós-transplantio e, subseqüentemente, a intervalos mensais, as plantas foram inspecionadas em relação à incidência de lesões foliares causada pelo fungo Asperisporium caricae. Para efeito de análise estatística, após o teste de homogeneidade das variâncias, foram consideradas quatro repetições por ambiente (tratamento), com seis plantas úteis por parcela. O modelo de quantificação da doença indicou efeito altamente significativo dos ambientes protegidos, estufa e estufa sombreada, quanto à incidência de sintomas, em comparação com ambientes de telado e em área natural de cultivo. Durante os 12 meses de avaliações foi constatada alta correlação entre incidência da doença e pluviosidade e umidade relativa do ar. As estruturas cobertas com plástico demonstraram alto potencial de controle de A. caricae, sendo, portanto, recomendáveis no sistema orgânico de produção do mamoeiro.

Impactos da certificação ISO 9000 no desempenho estratégico :um estudo em empresas brasileiras do setor químico

This thesis deals with analyzing the contribution grade of the ISO 9000 quality system to the strategic performance of the Brazilian firms in the Chemistry sector, using the Balanced Scorecard system as reference. An exploratory research is developed to get technical information about these two management systems, with emphasis in their integration. After, a quantitative research is implemented using a questionnaire, to know and to obtain necessaries data for improving statistical estimations of the multiple relationships between the variables and the strategic performance for the universe of 352 Brazilians firms that make use of ISO 9000 as quality system. The size of the sample totalized 111 firms, which represent more than 31% of the selected universe. The main results show different visions of directors and managers about the significant variables that contribute for the strategic performance of the analyzed firms. The ISO 9000 system presents a big contribution to the strategic performance, when referred by the four perspectives of the Balanced Scorecard: learning and growth; internal process; customer and financial. Better performance was verified in the learning and growth perspective and reasonable performance was verified in the financial perspective

Resistência a compressão de tijolos de solo-cimento fabricados com o montículo do cupim Cornitermes cumulans (Kollar, 1832)

Objetivou-se neste trabalho, comparar a resistência à compressão de tijolos de solo-cimento fabricados com o montículo do cupim Cornitermes cumulans (Kollar, 1832), com tijolos que utilizaram como matéria prima um NEOSSOLO QUARTZARÊNICO (Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA), 1999), ambos submetidos a duas idades de cura (07 ou 28 dias). O experimento foi montado em delineamento inteiramente casualizado, em esquema fatorial 2x2, sendo analisados dois cofatores: a matéria prima base e a idade de cura. Os ensaios físicos e mecânicos obedeceram às prescrições das normas da Associação Brasileira de Normas Técnicas NBR-8492 (ABNT, 1982) e NBR-8491 (ABNT, 1984). Concluiu-se que a resistência à compressão dos tijolos foi maior com o aumento das idades de cura. O tratamento T4 apresentou maior valor de resistência à compressão, não diferindo estatisticamente dos tratamentos T2 e T1. Os tijolos fabricados com o montículo do cupim C. cumulans (Kollar, 1832) apresentaram diminuição da absorção de água com o aumento das idades de cura, o que normalmente corresponde a um maior aumento da resistência à compressão, ao contrário dos que utilizaram o NEOSSOLO QUARTZARÊNICO (Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA), 1999).