Crop optimization and pre-steps standardization to get a Bipolaris euphorbiae-based bioherbicide

Making bioproducts available to the market requires finding appropriate processes for mass production and formulation of biological agents. This study aimed at evaluating the Bipolaris euphorbiae production in a solid medium (fermentation in solid substrate) and in a biphasic system (growth in a liquid medium followed by growth in a solid medium), as well as determining the processes for collecting and drying conidia, under laboratory conditions. The influence of the incubation period and inoculum quantity were also investigated. The conidia were dried by using an oven (30ºC, 35ºC, 40ºC, 45ºC, 50ºC, 55ºC and 60ºC), and laminar flow, continuous air flow and aseptic chamber at room temperature. Dry conidia were obtained by sieving and grinding in a ball mill, hammer mill or grain grinder. The conidia viability and sporulation efficiency were evaluated in the solid medium and in the biphasic system. For growth period, the best sporulation on solid medium was obtained after 10 days of incubation, reaching 8.3 x 10(7) conidia g-1 of substrate. The biphasic system did not increase the B. euphorbiae sporulation (4.5 x 10(7) conidia g-1 of substrate), after 14 days, and the amount of liquid inoculum used in this system was not an important factor for increasing its production. The continuous air flow and laminar flow preserved the conidial viability (94.6% and 99.1%, respectively), while promoting a great moisture loss (62.6% and 54.0%, respectively). All the grinding processes reduced the conidia germination (86.2%, 10.5% and 12%, respectively), while sieving allowed the collecting of powdered conidia with high viability (94.8%).

The effect of an Er,Cr:YSGG laser on external adaptation of healthy and decayed cavities

The aim of this study was to evaluate the influence of chlorhexidine and Er, Cr:YSGG laser irradiation on the bond strength and external adaptation in mixed healthy and caries-affected class V cavities before and after thermal cycling. Thirty-six cavity preparations were made in mixed class V buccal human molars, half of them being artificially caries-induced. Any remaining affected dentin was removed from the cavity with a round burr at low speed. The teeth were divided into six groups, according to cleaning agent for both healthy and caries-induced dentin: no treatment, chlorhexidine and erbium, chromium-doped: yttrium, scandium, gallium, garnet (Er,Cr:YSGG) laser irradiation. A Filtek P90 (3M ESPE, St Paul, MN, USA) silorane adhesive restorative system was used. The specimens were subjected to 5000 thermal cycles (5-55 degrees C 60 min). Epoxy replicas were obtained to characterize the external adaptation under scanning electron microscopy. The average percentages of non-continuous margins were 5.41% and 6.49% in enamel dentin before thermal cycling and 25% and 33.7% after thermal cycling, respectively. The caries-affected and laser irradiated cavities showed higher non-continuous margins. Thermal cycling was able to raise the percentage of non-continuous margin for all groups. Chlorhexidine did not affect the marginal adaptation results, and the Er,Cr:YSGG laser irradiation showed significantly worse results compared with the control group.

Effect of Water Exchange and Mechanical Aeration on Grow-out of the Amazon River Prawn in Ponds

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de uma metodologia numérica para escoamentos viscoelásticos não-isotérmicos

Pós-graduação em Matematica Aplicada e Computacional - FCT

Aplicação do lean six sigma na linha de produção de turbinas industriais a vapor

This work evaluates the implementation of Lean Six Sigma into the Steam Turbine’s Blades Manufacturing Process, aiming to improve productivity, quality and operational efficiency. Therefore, several tools have been applied, such as VSM, Spaghetti Diagram, Ishikawa, Pareto, DMAIC, Benchmarking and Control Charts, seeking to propose process improvements, as well as Quality Indicators creation. It was obtained a significant waste reduction throughout the process, achieving a lead time reduction of 42% and 83,41% in transport. Also, were introduced the Lean Thinking concepts, such as pull production and Continuous material flow. At the same time, it was possible to calculate the process capability and the sigma level, evaluating and proposing some improvements

Efeitos do treinamento com pesos nas atividades de vida diária básicas e instrumentais de pacientes com doença de Alzheimer

The Alzheimer's disease (AD) is a neurodegenerative and progressive disease, mostly seen in elderly people, characterized by memory loss. This commitment leads causes deficits in functional capacity, compromising the individual in execution of activities of daily living, like dressing and bathing. This study, with a longitudinal character, aimed analyze the effects of a protocol of weights training (WT) in global cognitive status and realization of activities of daily living (ADL´s) basic and instrumental in AD patients, comparing the effects of four months of WT in the performance of ADL´s in global cognitive status. And also aimed to verify the possible relations between ADL's and global cognitive status of patients before and after the experimental period. The study included 24 patients with clinical diagnosis of AD, divided into two groups: a) training group (TG) consisted of 13 patients who underwent a protocol of WT b) Social Gathering Group (SCG) consists of 11 patients participating in a protocol of social gathering not systematized with activities of reading, writing and walking. Both protocols lasted four months, being developed in three non-consecutive weekly sessions, lasting 60 minutes each. To quantify global cognitive status and the basic and instrumental ADLs were used, respectively, the Mini-Mental State Examination and the Self Perception of Performance in Activities of Daily Living, along with the battery of tests of Activities of Daily Life of Andreotti and Okuma (1999). To analyze the results where complied the nature of the data, using analysis of variance for repeated measures ANOVA two-way and Pearson correlation for continuous data and tests of U Mann Whitney, Wilcoxon and Spearman correlation for non-continuous data, assuming level significance of 5% for all analysis. After analysis it´s possible... (Complete abstract click electronic access below)

Comunicação e ações sociais na era da convergência e da interatividade

This paper aims to propose a communication plan to Internet media that explores interaction, expanding “Agência Propagação” institutional communication and of its principal product, the social propaganda messages named “Minuto Consciente”. This study will be based on the concepts of Convergence Culture (JENKINS, 2009), Digital Marketing (TORRES, 2009), Integrated Communication (KUNSCH, 2003) and Computer Mediated Interaction (PRIMO, 2007) to understand the communication an interaction phenomenon in digital era and select the strategies to establish a continuous communication flow in different medias. Therefore, this paper will use exploratory and empirical methodology

Adaptação marginal do agregado de trióxido mineral com e sem cloreto de cálcio em retrocavidades

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Infecção experimental para avaliar a excreção do vírus da diarreia viral bovina por leitões desmamados e transmissão viral por via aerógena

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Formale Struktur, Narrativitaet und Wahrnehmung des Zuschauers

Die vorliegende Arbeit untersucht, wie sich Greenaways Filme selbstreflexiv zur Problematik des filmischen Mediums stellen, d.h. wie der Illusions- und Artefaktcharakter des Films im Film selbst thematisiert wird. Die Untersuchung der Selbstreflexion wird konkret unter drei Untersuchungsaspekten erfolgt, nämlich die systematisch und künstlich organisierte formale Struktur, die Narrativität und die Wahrnehmungsweise des Zuschauers. Greenaways Filme veranschaulichen auf der formalen Ebene:· daß die Filmbilder diskontinuierlich und uneinheitlich sind, · wie einzelnen visuellen, akustischen und technischen Zeichen systematisch und künstlich organisiert sind und schließlich· wie die diskontinuierlichen und uneinheitlichen Filmbilder durch die systematische und künstliche Organisation der Zeichen kontinuierlich und einheitlich wirken. Seine Filme thematisieren auch auf der allegorischen, symbolischen und metaphorischen Ebene das Verhältnis zwischen der formalen Struktur, der Geschichte und der interaktiven Wahrnehmungsweise des Zuschauers, und die Beziehung zwischen dem Zuschauer, dem Film, dem Filmemacher. Die männliche Hauptfigur metaphorisiert den Zuschauer. Die Frauenfiguren allegorisieren die zwei Seiten des Films, die Form und den Inhalt des Films. Die sexuelle Beziehung zwischen der männlichen Hauptfigur und den Frauen umfaßt auf der metaphorischen Ebene die Interaktivität des Zuschauers mit dem Film.

Position-dependent effects on stability in tricyclo-DNA modified oligonucleotide duplexes

A series of oligodeoxyribonucleotides and oligoribonucleotides containing single and multiple tricyclo(tc)-nucleosides in various arrangements were prepared and the thermal and thermodynamic transition profiles of duplexes with complementary DNA and RNA evaluated. Tc-residues aligned in a non-continuous fashion in an RNA strand significantly decrease affinity to complementary RNA and DNA, mostly as a consequence of a loss of pairing enthalpy DeltaH. Arranging the tc-residues in a continuous fashion rescues T(m) and leads to higher DNA and RNA affinity. Substitution of oligodeoxyribonucleotides in the same way causes much less differences in T(m) when paired to complementary DNA and leads to substantial increases in T(m) when paired to complementary RNA. CD-spectroscopic investigations in combination with molecular dynamics simulations of duplexes with single modifications show that tc-residues in the RNA backbone distinctly influence the conformation of the neighboring nucleotides forcing them into higher energy conformations, while tc-residues in the DNA backbone seem to have negligible influence on the nearest neighbor conformations. These results rationalize the observed affinity differences and are of relevance for the design of tc-DNA containing oligonucleotides for applications in antisense or RNAi therapy.

The recoil transfer chamber - An interface to connect the physical preseparator TASCA with chemistry and counting setups

Performing experiments with transactinide elements demands highly sensitive detection methods due to the extremely low production rates (one-atom-at-a-time conditions). Preseparation with a physical recoil separator is a powerful method to significantly reduce the background in experiments with sufficiently long-lived isotopes (t1/2≥0.5 s). In the last years, the new gas-filled TransActinide Separator and Chemistry Apparatus (TASCA) was installed and successfully commissioned at GSI. Here, we report on the design and performance of a Recoil Transfer Chamber (RTC) for TASCA—an interface to connect various chemistry and counting setups with the separator. Nuclear reaction products recoiling out of the target are separated according to their magnetic rigidity within TASCA, and the wanted products are guided to the focal plane of TASCA. In the focal plane, they pass a thin Mylar window that separates the ∼1 mbar atmosphere in TASCA from the RTC kept at ∼1 bar. The ions are stopped in the RTC and transported by a continuous gas flow from the RTC to the ancillary setup. In this paper, we report on measurements of the transportation yields under various conditions and on the first chemistry experiments at TASCA—an electrochemistry experiment with osmium and an ion exchange experiment with the transactinide element rutherfordium.

Results of herd health management in veal calf production

The aim of this study was to document experience gained with herd health management in veal calf production and to describe the calves' most frequent health problems. Fifteen farms with an 'all-in-all-out' animal flow system and 20 farms with a continuous animal flow system were investigated and data on animal movements, housing, feeding, medical treatments, and management were collected. Cadavers underwent pathological examination, and data were recorded from the carcasses of slaughtered calves. On the 15 'all-in-all-out'-farms, 2'747 calves were clinically examined by the contract-veterinarian upon arrival at the farm, and 71,1 % of the calves showed at least one sign of illness. The main causes of death were with 54,9 % digestive disorders (a perforating abomasal ulcer being the most frequent diagnosis), followed by respiratory diseases (29,6 %, mainly pneumonia). The meat color of 25 % of the carcasses was red. Calves from farms with the continuous animal flow system, which recruit mainly animals originating from the same farm, showed significantly better results regarding antibiotic use, performance and carcass quality than those calves from farms with the 'all-in-all-out'-system.

A compact and portable deposition chamber to study nanoparticles in air-exposed tissue

BACKGROUND Epidemiological studies show that elevated levels of particulate matter in ambient air are highly correlated with respiratory and cardiovascular diseases. Atmospheric particles originate from a large number of sources and have a highly complex and variable composition. An assessment of their potential health risks and the identification of the most toxic particle sources would require a large number of investigations. Due to ethical and economic reasons, it is desirable to reduce the number of in vivo studies and to develop suitable in vitro systems for the investigation of cell-particle interactions. METHODS We present the design of a new particle deposition chamber in which aerosol particles are deposited onto cell cultures out of a continuous air flow. The chamber allows for a simultaneous exposure of 12 cell cultures. RESULTS Physiological conditions within the deposition chamber can be sustained constantly at 36-37°C and 90-95% relative humidity. Particle deposition within the chamber and especially on the cell cultures was determined in detail, showing that during a deposition time of 2 hr 8.4% (24% relative standard deviation) of particles with a mean diameter of 50 nm [mass median diameter of 100 nm (geometric standard deviation 1.7)] are deposited on the cell cultures, which is equal to 24-34% of all charged particles. The average well-to-well variability of particles deposited simultaneously in the 12 cell cultures during an experiment is 15.6% (24.7% relative standard deviation). CONCLUSIONS This particle deposition chamber is a new in vitro system to investigate realistic cell-particle interactions at physiological conditions, minimizing stress on the cell cultures other than from deposited particles. A detailed knowledge of particle deposition characteristics on the cell cultures allows evaluating reliable dose-response relationships. The compact and portable design of the deposition chamber allows for measurements at any particle sources of interest.

Comparison of turbulence models for the computational fluid dynamics simulation of wind turbine wakes in the atmospheric boundary layer

An elliptic computational fluid dynamics wake model based on the actuator disk concept is used to simulate a wind turbine, approximated by a disk upon which a distribution of forces, defined as axial momentum sources, is applied on an incoming non-uniform shear flow. The rotor is supposed to be uniformly loaded with the exerted forces estimated as a function of the incident wind speed, thrust coefficient and rotor diameter. The model is assessed in terms of wind speed deficit and added turbulence intensity for different turbulence models and is validated from experimental measurements of the Sexbierum wind turbine experiment.