Characterization of an antioxidant surfactant-free topical formulation containing Castanea sativa leaf extract

Context: Inclusion of antioxidants in topical formulations can contribute to minimize oxidative stress in the skin, which has been associated with photoaging, several dermatosis and cancer. Objective: A Castanea sativa leaf extract with established antioxidant activity was incorporated into a semisolid surfactant-free formulation. The objective of this study was to perform a comprehensive characterization of this formulation. Materials and methods: Physical, microbiological and functional stability were evaluated during 6 months storage at 20 °C and 40 °C. Microstructure elucidation (cryo-SEM), in vitro release and in vivo moisturizing effect (Corneometer® CM 825) were also assessed. Results and discussion: Minor changes were observed in the textural and rheological properties of the formulation when stored at 20 °C for 6 months and the antioxidant activity of the plant extract remained constant throughout the storage period. Microbiological quality was confirmed at the end of the study. Under accelerated conditions, higher modifications of the evaluated parameters were observed. Cryo-SEM analysis revealed the presence of oil droplets dispersed into a gelified external phase. The release rate of the antioxidant compounds (610 ± 70 µgh−0.5) followed Higuchi model. A significant in vivo moisturizing effect was demonstrated, that lasted at least 4 h after product’s application. Conclusion: The physical, functional and microbiological stability of the antioxidant formulation was established. Specific storage conditions should be recommended considering the influence of temperature on the stability. A skin hydration effect and good skin tolerance were also found which suggests that this preparation can be useful in the prevention or treatment of oxidative stress-mediated dysfunctions.

Larval control of Anopheles (Nyssorhinchus) darlingiusing granular formulation of Bacillus sphaericus in abandoned gold-miners excavation pools in the Brazilian Amazon Rainforest

INTRODUCTION: Use of a Bacillus sphaericus based mosquito larvicide was evaluated as an intervention for malaria vector control at a mining site in Amapá, Brazil. Impacts on larval and adult densities of the primary vector Anopheles darlingi were measured over the course of a 52 week study period.METHODS: In Calçoene, State of Amapá, gold mining activity occurs in 19 mining sites in gold-miners of Lourenço. Large pools are formed in mining sites and naturally colonized by Anopheles darlingi. During one year, the impact of applications of VectoLex(r) CG to these larval sources was evaluated. Applications of 20kg/ha were made as needed, based on 10 immature (3rd, 4th instars and pupae) surveillance of health and established thresholds. RESULTS: One hundred percent initial control was observed 48h after each treatment. The pools received from 2-10 (5.3±1.6) treatments during the year. The average re-treatment interval in productive pools was 9.4±4.3 weeks. During weeks 3-52 of the study, mean density of late stage larvae was 78% and pupae were 93% lower in the treated pools than in untreated pools (p< 0.0001, n=51) while reduction of adult mosquitoes was 53% in comparison to the untreated area during the last five months of the study, which were the rainy season (p<0.001).CONCLUSIONS:VectoLex(r) CG reduced immature Anopheles darlingi infestation levels during the entire study period, and reduced adult mosquito populations during the rainy season.

The effects of a diet formulation with oats, soybeans, and flax on lipid profiles and uricemia in patients with AIDS and dyslipidemia

Introduction Although the initiation of highly active antiretroviral therapy (HAART) is accompanied by an attenuation of viral load, metabolic disorders characterized by hyperglycemia, dyslipidemia, and lipodystrophy are often observed in patients under this treatment. Certain foods, such as oat bran, soy protein, and flaxseed, have been shown to improve a patient's lipid profile despite possible increases in uricemia. Thus, a bioactive compound was formulated using these foods to help patients with HIV/AIDS control metabolic disorders resulting from HAART. Methods An uncontrolled before and after study was performed. The total cholesterol, HDL-cholesterol, LDL-cholesterol, triglycerides, and uric acid before and after 3 months of consuming the formulation were compared in patients. The compound was formulated such that 40g (the recommended daily intake) contained approximately 10g of flaxseed, 20g of oat bran, and 10g of textured soy protein. Results The study population consisted of 139 patients, 31 of whom were included in the final analysis. There were no significant variations between the laboratory results obtained before and after consumption of the compound. Conclusions The regular consumption of the formulation together with individualized dietary guidance did not reduce lipid levels and did not contribute to an increase in uricemia in the study group. However, new studies with higher doses of the foods that compose the formulation should be encouraged to investigate whether these foods can positively influence the lipid profiles of these patients.

EFFECT – Efficient finite element code

The theme of this dissertation is the finite element method applied to mechanical structures. A new finite element program is developed that, besides executing different types of structural analysis, also allows the calculation of the derivatives of structural performances using the continuum method of design sensitivities analysis, with the purpose of allowing, in combination with the mathematical programming algorithms found in the commercial software MATLAB, to solve structural optimization problems. The program is called EFFECT – Efficient Finite Element Code. The object-oriented programming paradigm and specifically the C ++ programming language are used for program development. The main objective of this dissertation is to design EFFECT so that it can constitute, in this stage of development, the foundation for a program with analysis capacities similar to other open source finite element programs. In this first stage, 6 elements are implemented for linear analysis: 2-dimensional truss (Truss2D), 3-dimensional truss (Truss3D), 2-dimensional beam (Beam2D), 3-dimensional beam (Beam3D), triangular shell element (Shell3Node) and quadrilateral shell element (Shell4Node). The shell elements combine two distinct elements, one for simulating the membrane behavior and the other to simulate the plate bending behavior. The non-linear analysis capability is also developed, combining the corotational formulation with the Newton-Raphson iterative method, but at this stage is only avaiable to solve problems modeled with Beam2D elements subject to large displacements and rotations, called nonlinear geometric problems. The design sensitivity analysis capability is implemented in two elements, Truss2D and Beam2D, where are included the procedures and the analytic expressions for calculating derivatives of displacements, stress and volume performances with respect to 5 different design variables types. Finally, a set of test examples were created to validate the accuracy and consistency of the result obtained from EFFECT, by comparing them with results published in the literature or obtained with the ANSYS commercial finite element code.

Role of Intersectoral Collaboration in Mental Health Policy Formulation And Service Delivery in Saint Lucia

RESUMO: Santa Lúcia pequena ilha de país em desenvolvimento com recursos limitados e é confrontada com uma série de desafios socioeconômicos que exigem soluções criativas e inovadoras. É comprovado que a combinação de recursos entre setores para estabelecer os determinantes social, econômico e ambiental da saúde são uma estratégia útil para melhorar a saúde da população, principalmente a sua saúde mental. Este estudo, o primeiro do seu tipo em Santa Lúcia, procurou examinar até que ponto a disponibilidade de uma política nacional de saúde mental levou a ação intersetorial para o fornecimento de serviços e promoção da saúde mental. Além disso, o estudo examinou o nível de colaboração intersetorial que existe entre as agências que prestam cuidados diretos e serviços de suporte para pessoas com doenças mentais e problemas sérios de saúde mental. O estudo também teve como objetivo identificar os fatores que promovem ou dificultam a colaboração intersectorial e gerar recomendações que possam ser aplicadas para países muito pequenos e com perfis socioeconômicos semelhantes. Os dados gerados a partir de três (3) fontes foram sintetizados para formar uma visão ampla das questões. Uma avaliação da política de saúde mental de 2007, uma avaliação que identifica até que ponto a ação intersetorial atualmente deixa a prestação de serviços de saúde mental e a administração de entrevistas semiestruturadas nas mãos de gestores do programa de diferentes agências em todos os setores. O estudo concluiu que, apesar da disponibilidade de uma política de saúde mental, que articula clara e explicitamente a colaboração intersetorial como área prioritária para ação, quase não existe no sistema de fornecimento atual do serviço. Os provedores de serviços em todos os setores reconhecem que há os benefícios da colaboração intersectorial e com entraves significativos em relação à colaboração intersetorial, que por sua vez, impede uma abordagem nacional para o planejamento e o fornecimento do serviço. A colaboração intersetorial não será possível se os próprios setores dependerem da abordagem direta do setor da saúde ou se a atmosfera geral for ofuscada pela estigmatização das doenças mentais.------------------------------------------------------------------------ABSTRACT: Saint Lucia a small island developing country with limited resources, is faced with a number of socio-economic challenges which require creative and innovative solutions to address. Combining resources across sectors to address the social, economic and environmental determinants of health has proven to be a useful strategy for improving population health in particular mental health. This study, the first of its kind for Saint Lucia sought to examine the extent to which the availability of a national mental health policy led to intersectoral action for mental health promotion and service delivery. In addition the study examined the level of intersectoral collaboration which actually exist between agencies which provide direct care and support services to people with mental illnesses and significant mental health problems. The study also aimed to identify the factors which promote or hinder intersectoral collaboration and generate recommendations which can be applied to extremely small countries with similar socio-economic profiles. Data generated from three (3) sources was synthesized to form a broad picture of the issues. An evaluation of the mental health policy of 2007, an assessment of the extent to which intersectoral action currently exist in mental health service delivery and the administration of semi-structured interviews with program managers from different agencies across sectors to identify implementation issues. The study concluded that despite the availability of a mental health policy which clearly and explicitly articulates intersectoral collaboration as a priority area for action, very little exists in the current service delivery system. Services providers across sectors acknowledge the benefits of intersectoral collaboration and that there are significant barriers to intersectoral collaboration, which in turn hinders a national approach to service planning and delivery. Intersectoral collaboration is not possible if sectors themselves are dependent on a top-down health sector driven and dominated approach, or if the general atmosphere is clouded by stigmatization of mental health illnesses.

Contribution to the marine propeller hydrodynamic design for small boats in the Amazon region

ABSTRACTIn the Amazon, river navigation is very important due to the length of navigable rivers and the lack of alternative road networks. Boats usually operate in unfavorable conditions, since there is no hydrodynamic relation among propellers, geometry, and the dimensions of the boat hull. Currently, there is no methodology for propeller hydrodynamic optimization with low computational cost and easy implementation in the region. The aim of this work was to develop a mathematical approach for marine propeller design applied to boats typically found on Amazon rivers. We developed an optimized formulation for the chord and pitch angle distributions, taking into account the classical model of Glauert. A theoretical analysis for the thrust and torque relationships on an annular control volume was performed. The mathematical model used was based on the Blade Element Momentum Theory (BEMT). We concluded that the new methodology proposed in this work demonstrates a good physical behavior when compared with the theory of Glauert and the experimental data of the Wageningen B3-50 propeller.

Presence of starch enhances in vitro biodegradation and biocompatibility of a gentamicin delivery formulation

The effect of α-amylase degradation on the release of gentamicin from starch-conjugated chitosan microparticles was investigated up to 60 days. Scanning electron microscopic observations showed an increase in the porosity and surface roughness of the microparticles as well as reduced diameters. This was confirmed by 67% weight loss of the microparticles in the presence of α-amylase. Over time, a highly porous matrix was obtained leading to increased permeability and increased water uptake with possible diffusion of gentamicin. Indeed, a faster release of gentamicin was observed with α-amylase. Starch-conjugated chitosan particles are non-toxic and highly biocompatible for an osteoblast (SaOs-2) and fibroblast (L929) cell line as well as adipose-derived stem cells. When differently produced starch-conjugated chitosan particles were tested, their cytotoxic effect on SaOs-2 cells was found to be dependent on the crosslinking agent and on the amount of starch used.

Euler angles, Bryant angles and Euler parameters

This chapter deals with the different approaches for describing the rotational coordinates in spatial multibody systems. In this process, Euler angles and Bryant angles are briefly characterized. Particular emphasis is given to Euler parameters, which are utilized to describe the rotational coordinates in the present work. In addition, for all the types of coordinates considered in this chapter, a characterization of the transformation matrix is fully described.

Vector of coordinates, velocities and accelerations

This chapter describes the how the vector of coordinates are defined in the formulation of spatial multibody systems. For this purpose, the translational motion is described in terms of Cartesian coordinates, while rotational motion is specified using the technique of Euler parameters. This approach avoids the computational difficulties associated with the singularities in the case of using Euler angles or Bryant angles. Moreover, the formulation of the velocities vector and accelerations vector is presented and analyzed here. These two sets of vectors are defined in terms of translational and rotational coordinates.

Multibody systems formulation

"Series: Solid mechanics and its applications, vol. 226"

Analytical and numerical investigation of the ultra-relativistic Euler equations

Magdeburg, Univ., Fak. für Mathematik, Diss., 2013