Who adopts Green Revolution (GR) technology in Ghana?

Sub-Saharan Africa in general and Ghana in particular, missed out on the Green revolution. Efforts are being made to re-introduce the revolution, and this calls for more socio-economic research into the factors influencing the adoption of new technologies, hence, this study. The study sought to find out how socio-economic factors contribute to adoption of Green revolution technology in Ghana. The method of analysis involved a maximum likelihood estimation of a probit model. The proportion of Green revolution inputs was found to be greater for the following: households whose heads had formal education, households with higher levels of non-farm income, credit and labor supply as well as those living in urban centers. It is recommended that levels of complementary inputs such as credit, extension services and infrastructure are increased. Also, households must be encouraged to form farmer-groups as an important source of farm labor. Furthermore, the fundamental problems of illiteracy must be addressed through increasing the levels of formal and non-formal education; and the gap between the rural and urban centers must be bridged through infrastructural and rural development. However, care must be taken to ensure that small-scale farmers are not marginalized, in terms of access to these complementary inputs that go with effective adoption of new technology. With these policies well implemented, Ghana can catch up with her Asian counterparts in this re-introduction of the revolution.

Perspectives on the specification of Building Integrated Photovoltaic (BIPV) technology in construction projects

Innovative, low carbon technologies are already available for use in the construction of buildings, but the impact of their specification on construction projects is unclear. This exploratory research identifies issues which arise following the specification of BIPV in non-residential construction projects. Rather than treating the inclusion of a new technology as a technical problem, the research explores the issue from a socio-technical perspective to understand the accommodations which the project team makes and their effect on the building and the technology. The paper is part of a larger research project which uses a Social Construction of Technology Approach (SCOT) to explore the accommodations made to working practices and design when Building Integrated PhotoVoltaic (BIPV) technology is introduced. The approach explores how the requirements of the technology from different groups of actors (Relevant Social Groups or RSG's) give rise to problems and create solutions. As such it rejects the notion of a rational linear view of innovation diffusion; instead it suggests that the variety and composition of the Relevant Social Groups set the agenda for problem solving and solutions as the project progresses. The research explores the experiences of three people who have extensive histories of involvement with BIPV in construction, looks at how SCOT can inform our understanding of the issues involved and identifies themes and issues in the specification of BIPV on construction projects. A key finding concerns the alignment of inflection points at which interviewees have found themselves changing from one RSG to another as new problems and solutions are identified. The points at which they change RSG often occurred at points which mirror conventional construction categories (in terms of project specification, tender, design and construction).

Technology adoption and effects of transfers across locations

This paper develops a two-period model with heterogeneous agents to analyze the e¤ects of transfers across locations on convergence, growth and welfare. The model has two important features. First, locations are asymmetric as it is assumed that there are more specialized occupations in the more developed one. Second, the returns on the investment to acquire new technology depend positively on the level of each region’s knowledge and on the level of the world knowledge assumed to be available to all. In one hand, the poor region has a disadvantage as it has a lower stock of knowledge. On the other hand, it has the advantage of not having yet exploited a greater stock of useable knowledge available in the world. Hence, there are two possible cases. When the returns are greater in the poor region, we obtain the following results: (i) the rich location grows slower; (ii) the transfers to the poor location enhances the country’s growth rate; and (iii) there is a positive amount of transfers to the poor region that is welfare improving. When the returns are greater in the rich region, the …rst two results are reversed and transfers to the rich region are welfare improving. In both cases, the optimal amount of transfer increases with the level of income disparity across regions and is not dependent on the level of the country’s economic development (measured by its income per capita). Barriers to the adoption of new technology available in the world can constrain the convergence process as it harms in greater length the poor region. The results do not change whether migration is allowed or not.

A First approach on the new transmission system in northern Brazil

This article shows an analysis of the electrical parameters of a three-phase transmission line section using a relatively new design for steel towers characterized by 280 meters high. These main features, the height of the line conductors and distance between them, are intrinsically related to the longitudinal and transversal parameters of the line. By this means, an analysis was carried out in order to show the electrical variations between a transmission line using the new technology and a conventional 440-kV line through a wide range of frequencies and a variable soil resistivity. © 2012 The Institution of Engineering and Technology.

Relações públicas e o Brand Management: storytelling 2.0 na construção de relacionamentos

According to the Informational Society of the twentieth century, man develops society of the spectacle, where life becomes virtual and the individual ceases to be a spectator becoming the protagonist of wikiciberepopéia and organizations seeking to gain the attention and time of its consumers through new communication strategies. If the great epics of mankind brought mythical heroes, divine, with powers (mostly above the mortals), in the era of new technologies, the common man is in the hands the opportunity to become the hero of his own ciberepopéia. Increasingly resistant to traditional advertising, the new model of media consumer, the prosumer, the storytelling is transforming into one of the main communication tools of contemporary organizations. Offer your audience a creative and relevant content across several media platforms is a major brand positioning strategies currently used, in addition to providing the transmission of values and organizational principles in a subjective manner. Storytelling where objects are extensions of the human body (eg, the cell can be treated as an extension of the ears) is a strong indication of a technocratic society, because we can consider the new technologies as extensions of the human brain (as new store technologies, create meanings, share information through a specific language) and the individual who is on the edge of new technology ends up being excluded from certain social events. This new world tends to put an end to separation between seemingly contrary ideas, such as reality/fiction, natural/cultural and the man who emerges from this medium is not the creator, but rather, transforming what already exists. The current human evolution takes place from about half the human mind and tell stories that go beyond the media saturation that really emocionem and who have a real meaning for those who listen, to be interconnected with the socio-environmental reality of this new consumer, is a major chall...

Development of new tools and devices for CMB and foreground data analysis and future experiments

The discovery of the Cosmic Microwave Background (CMB) radiation in 1965 is one of the fundamental milestones supporting the Big Bang theory. The CMB is one of the most important source of information in cosmology. The excellent accuracy of the recent CMB data of WMAP and Planck satellites confirmed the validity of the standard cosmological model and set a new challenge for the data analysis processes and their interpretation. In this thesis we deal with several aspects and useful tools of the data analysis. We focus on their optimization in order to have a complete exploitation of the Planck data and contribute to the final published results. The issues investigated are: the change of coordinates of CMB maps using the HEALPix package, the problem of the aliasing effect in the generation of low resolution maps, the comparison of the Angular Power Spectrum (APS) extraction performances of the optimal QML method, implemented in the code called BolPol, and the pseudo-Cl method, implemented in Cromaster. The QML method has been then applied to the Planck data at large angular scales to extract the CMB APS. The same method has been applied also to analyze the TT parity and the Low Variance anomalies in the Planck maps, showing a consistent deviation from the standard cosmological model, the possible origins for this results have been discussed. The Cromaster code instead has been applied to the 408 MHz and 1.42 GHz surveys focusing on the analysis of the APS of selected regions of the synchrotron emission. The new generation of CMB experiments will be dedicated to polarization measurements, for which are necessary high accuracy devices for separating the polarizations. Here a new technology, called Photonic Crystals, is exploited to develop a new polarization splitter device and its performances are compared to the devices used nowadays.

Technology Development and Consumer Acceptance of Innovation in Fruit Production

Precision Agriculture (PA) and the more specific branch of Precision Horticulture are two very promising sectors. They focus on the use of technologies in agriculture to optimize the use of inputs, so to reach a better efficiency, and minimize waste of resources. This important objective motivated many researchers and companies to search new technology solutions. Sometimes the effort proved to be a good seed, but sometimes an unfeasible idea. So that PA, from its birth more or less 25 years ago, is still a “new” management, interesting for the future, but an actual low adoption rate is still reported by experts and researchers. This work aims to give a contribution in finding the causes of this low adoption rate and proposing a methodological solution to this problem. The first step was to examine prior research about Precision Agriculture adoption, by ex ante and ex post approach. It was supposed as important to find connections between these two phases of a purchase experience. In fact, the ex ante studies dealt with potential consumer’s perceptions before a usage experience occurred, therefore before purchasing a technology, while the ex post studies described the drivers which made a farmer become an end-user of PA technology. Then, an example of consumer research is presented. This was an ex ante research focused on pre-prototype technology for fruit production. This kind of research could give precious information about consumer acceptance before reaching an advanced development phase of the technology, and so to have the possibility to change something with the least financial impact. The final step was to develop the pre-prototype technology that was the subject of the consumer acceptance research and test its technical characteristics.

[Old and new interventional therapies in the treatment of symptomatic benign prostate hyperplasia (BPH)]

Benign Prostatic Hyperplasia is a common entity among the aging male population. Its prevalence is increasing with age and is around 80% in the over 80-years old. The androgen-estrogen ratio changes in favor of the estrogens, which leads to a growth of prostatic tissue, presenting histologically as hyperplasia. BPH can cause irritative or obstructive symptoms or both. Nowadays we speak of bladder storage or bladder voiding symptoms, summarised as LUTS (Lower Urinary Tract Symptoms). LUTS has a structural and a functional component, the structural being caused by the size of the adenoma itself the functional depending on the muscle tone of the bladder neck and the prostatic urethra. To investigate LUTS, we use validated symptom scores, sonography for residual urine and eventually a urodynamic evaluation. There are 3 grades of BPH. The indication for an interventional therapy is relative in BPH II, and absolute in BPH III. Prior to treatment, other diseases mimicking the same symptoms, have to be ruled out and adequatly treated. Electro-resection of the prostate (TUR-P) remains the standard therapy and the benchmark any new technology has to compete with. TUR-P has good short- and longterm results, but can be associated with a considerable perioperative morbidity, and the learning curve for the operator is long. The most promising of the newer techniques is the Holmium-Laser-Enucleation of the prostate (Laser-TUR-P), showing at least identical short- and median-term results, but a lower perioperative morbidity than TUR-P For several minimally-invasive techniques, indications are limited. TUMT TUNA, WIT and laser-coagulation all produce a coagulation necrosis of the prostatic tissue by thermic damage with secondary tissue shrinking. Urodynamic results however, are not comparable to TUR-P or Laser-TUR-P, and significantly more secondary interventions within 2 to 5 years are required. Minimal-invasive techniques present a favorable alternative for younger patients without complications of BPH, and for older patients with relevant comorbidities, and can usually be performed under local anaesthesia. The morbidity is low and further therapies remain possible later, if necessary.

Development and improvement of warm-mix asphalt technology

Traditionally, asphalt mixtures were produced at high temperatures (between 150°C to 180°C) and therefore often referred to as Hot Mix Asphalt (HMA). Recently, a new technology named Warm Mix Asphalt (WMA) was developed in Europe that allows HMA to be produced at a lower temperature. Over years of research efforts, a few WMA technologies were introduced including the foaming method using Aspha-min® and Advera® WMA; organic additives such as Sasobit® and Asphaltan B®; and chemical packages such as Evotherm® and Cecabase RT®. Benefits were found when lower temperatures were used to produce asphalt mixtures, especially when it comes to environmental and energy savings. Even though WMA has shown promising results in energy savings and emission reduction, however, only limited studies and laboratory tests have been conducted to date. The objectives of this project are to 1) develop a mix design framework for WMA by evaluating its mechanical properties; 2) evaluate performance of WMA containing high percentages of recycled asphalt material; and 3) evaluate the moisture sensitivity in WMA. The test results show that most of the WMA has higher fatigue life and TSR which indicated WMA has better fatigue cracking and moisture damage resistant; however, the rutting potential of most of the WMA tested were higher than the control HMA. A recommended WMA mix design framework was developed as well. The WMA design framework was presented in this study to provide contractors, and government agencies successfully design WMA. Mixtures containing high RAP and RAS were studied as well and the overall results show that WMA technology allows the mixture containing high RAP content and RAS to be produced at lower temperature (up to 35°C lower) without significantly affect the performance of asphalt mixture in terms of rutting, fatigue and moisture susceptibility. Lastly, the study also found that by introducing the hydrated lime in the WMA, all mixtures modified by the hydrated lime passed the minimum requirement of 0.80. This indicated that, the moisture susceptibility of the WMA can be improved by adding the hydrated lime.

The impact of new technologies on distance learning students

This is a European Commission Leonardo da Vinci Reference Material project on the impact of new technology on distance learning students. It is known that all the Ministries of Education of the 27 European Union countries pay millions of Euros annually in the provision of educational technology for their schools, colleges and universities. A review of the literature of the impact of technology, however, showed that the research in this field was unacceptably fragile. What research there was focused on the impact of technology on children in American schools. The project set out, therefore, to measure the impact of technology on adult education, lifelong learning and distance education, with a particular focus on adult distance learning.

What is New and Innovative in Emergency Neurosurgery? Emerging Diagnostic Technologies Provide Better Care and Influence Outcome: A Specialist Review

The development of emergency medical services and especially neurosurgical emergencies during recent decades has necessitated the development of novel tools. Although the gadgets that the neurosurgeon uses today in emergencies give him important help in diagnosis and treatment, we still need new technology, which has rapidly developed. This review presents the latest diagnostic tools, which offer precious help in everyday emergency neurosurgery practice. New ultrasound devices make the diagnosis of haematomas easier. In stroke, the introduction of noninvasive new gadgets aims to provide better treatment to the patient. Finally, the entire development of computed tomography and progress in radiology have resulted in innovative CT scans and angiographic devices that advance the diagnosis, treatment, and outcome of the patent. The pressure on physicians to be quick and effective and to avoid any misjudgement of the patient has been transferred to the technology, with the emphasis on developing new systems that will provide our patients with a better outcome and quality of life.

Anticipating intended users - Prospective sensemaking in technology development

How do developers and designers of a new technology make sense of intended users? The critical groundwork for user-centred technology development begins not by involving actual users' exposure to the technological artefact but much earlier, with designers' and developers' vision of future users. Thus, anticipating intended users is critical to technology uptake. We conceptualise the anticipation of intended users as a form of prospective sensemaking in technology development. Employing a narrative analytical approach and drawing on four key communities in the development of Grid computing, we reconstruct how each community anticipated the intended Grid user. Based on our findings, we conceptualise user anticipation in Terms of two key dimensions, namely the intended possibility to inscribe user needs into the technological artefact as well as the intended scope of the application domain. In turn, these dimensions allow us to develop an initial typology of intended user concepts that in turn might provide a key building block towards a generic typology of intended users.

TELMA: Technology enhanced learning environment for minimally invasive surgery

Background: Cognitive skills training for minimally invasive surgery has traditionally relied upon diverse tools, such as seminars or lectures. Web technologies for e-learning have been adopted to provide ubiquitous training and serve as structured repositories for the vast amount of laparoscopic video sources available. However, these technologies fail to offer such features as formative and summative evaluation, guided learning, or collaborative interaction between users. Methodology: The "TELMA" environment is presented as a new technology-enhanced learning platform that increases the user's experience using a four-pillared architecture: (1) an authoring tool for the creation of didactic contents; (2) a learning content and knowledge management system that incorporates a modular and scalable system to capture, catalogue, search, and retrieve multimedia content; (3) an evaluation module that provides learning feedback to users; and (4) a professional network for collaborative learning between users. Face validation of the environment and the authoring tool are presented. Results: Face validation of TELMA reveals the positive perception of surgeons regarding the implementation of TELMA and their willingness to use it as a cognitive skills training tool. Preliminary validation data also reflect the importance of providing an easy-to-use, functional authoring tool to create didactic content. Conclusion: The TELMA environment is currently installed and used at the Jesús Usón Minimally Invasive Surgery Centre and several other Spanish hospitals. Face validation results ascertain the acceptance and usefulness of this new minimally invasive surgery training environment.

Strategic rigidity and foresight for technology adoption among electric utilities

The variation in the adoption of a technology as a major source of competitive advantage has been attributed to the wide-ranging strategic foresight and the integrative capability of a firm. These possible areas of competitive advantage can exist in the periphery of the firm's strategic vision and can get easily blurred as a result of rigidness and can permeate in the decision-making process of the firm. This article explores how electric utility firms with a renewable energy portfolio can become strategically rigid in terms of adoption of newer technologies. The reluctance or delay in the adoption of new technology can be characterized as strategic rigidness, brought upon as a result of a firm's core competence or core capability in the other, more conventional technology arrangement. This paper explores the implications of such rigidness on the performance of a firm and consequently on the energy eco-system. The paper substantiates the results by emphasizing the case of Iberdrola S.A., an incumbent firm as a wind energy developer and its adoption decision behavior. We illustrate that the very routines that create competitive advantage for firms in the electric utility industry are vulnerable as they might also develop as sources of competitive disadvantage, when firms confront environmental change and uncertainty.