Wind-induced loads over double cantilever bridges under construction

Within the last century the interest in wind-induced loads over civil engineering structures has become more and more important, the reason being that the development of new construction techniques and materials has allowed engineers and architects to design new structures far from the traditional concepts, and in many cases wind actions over these singular structures are not included in the existing codes of practice. In this paper the windinduced static loads over bridges constructed by the double cantilever method during erection stages are considered. The aerodynamic load over a double cantilever bridge under a yawing-angled wind produces a yawing (torsional) moment on the bridge deck, which can lead to undesirable rotation of the deck about the supporting pier. The effects of the wind yaw angle and the length of the deck are analysed. The wind action caused by the presence of sliding concrete forms at the ends of the deck is also studied.

Definición de los procedimientos e indicadores de la cadena de custodia de la industria de pasta y papel vinculados a la normativa ISO 9000/14000

En el trabajo se ha reflejado la génesis del término „desarrollo sostenible‟ y la preocupación social y de los gobiernos hacia la sostenibilidad de los recursos, generando una política forestal a escala internacional, cuyo hito inicial desempeña la Cumbre de Rio y otros procesos, donde surge el término „sostenibilidad‟ - procesos gubernamentales que ponen su atención en los bosques,entre ellos el Proceso paneuropeo del que emanan los Criterios e indicadores de la gestión forestal sostenible, así como otros foros donde aparece la vinculación entre los productos y la sostenibilidad de los bosques de donde proceden. A partir de esos conceptos aparecen los sistemas de certificación, primero FSC, promovido por las ONG ambientalistas, y en respuesta a ello, el sistema PEFC de los propietarios forestales privados con las industrias forestales. En su introducción, el trabajo recoge como surge y evoluciona esta preocupación y como se sucede y desarrollan los sistemas de certificación en España, orientados tanto a la superficie forestal como a sus productos derivados. Tratando de ser una herramienta técnica, en estos últimos quince años, se han ido planteando metodologías y propuestas técnicas que puedan garantizar el origen sostenible del bosque de donde procede la materia prima. Aunque la persistencia de la masa forestal como término tiene importancia, no considera numerosos aspectos incluidos en el concepto “gestión forestal sostenible”. El trabajo manifiesta qué es y cómo se origina la Gestión Forestal Sostenible y muy ligado con ello, el origen de la certificación como herramienta, explicando cómo se incardina la certificación forestal española con las estructuras internacionales y se construyen nuevas estructuras a escala española y autonómica. Se expone el dominio y alcance técnico de la certificación, sus inicios y un análisis de la diversidad de sistemas y etiquetas existentes -como ha ido evolucionando a escala internacional y nacional, por sistemas, sectores y continentes, con especial atención en España, recopilando lo sucedido relevante para el sector forestal, industrias forestales y sistemas de certificación en los años de estudio de elaboración de la tesis. Se refleja la relevancia que adquiere la certificación forestal y de la cadena de custodia para la industria del papel, tanto por las regulaciones, normativas y legislación que involucran al producto derivado del bosque como por ser herramienta que enlaza el bosque sostenible con el consumidor. La aplicación de todas esas especificaciones técnicas que muestran la sostenibilidad del bosque y al trazabilidad en el proceso productivo comporta una carga administrativa de recopilación de información, de control para el seguimiento asociado con los registros necesarios, y de archivo de documentos, conforme a las exigencias que plantean los sistemas de certificación forestal. Por tanto, es importante definir un método y procedimientos genéricos para los correspondientes sistemas de gestión preexistentes en las empresas del sector de pasta y papel (de calidad/ de medio ambiente/integrados), para implantar un Sistema de Cadena de Custodia genérico (común a FSC y PEFC) en una instalación de celulosa y papel y un sistema de diligencia debida. Para ello, ha sido necesario analizar la línea de producción y establecer los puntos de su diagrama en los que se requiere el control de la trazabilidad, puntos en los que se procede al seguimiento y registro de la materia prima, materia semielaborada y producto, y de ahí proceder a redactar o retocar los procedimientos de gestión calidad/ medioambiental, en su caso, para incluir los campos de registro. Según determinen los procedimientos, se efectuará un seguimiento y registro de los, derivados que configuran una característica y se determinará una serie de indicadores del sistema de trazabilidad de la madera en la industria de celulosa y papel, es decir, un conjunto de parámetros cuantitativos y descriptivos, sujetos al seguimiento de forma periódica, que muestren el cambio y permitan observar la evaluación y control del Sistema de Cadena de Custodia. Además de asegurar la trazabilidad de la madera y fibra en la industria de pasta y papel y con ello la sostenibilidad del bosque del que procede, se avalará la legalidad de los aprovechamientos que proporcionan ese recurso maderable, cumpliendo así no sólo la legislación vigente sino también ambos sistemas de certificación FSC y PEFC. El sistema de cadena de custodia de la pasta y papel se caracteriza por los indicadores de seguimiento que permite el control de la trazabilidad. ABSTRACT This paper traces the origins of the term „Sustainable Development‟ and of both citizen and institutional concern for the sustainability of resources, leading to the enactment of a forestry policy at international level, of which the initial milestones are the Rio Summit and other processes in which the term „Sustainability‟ was born. Those forestfocused institutional initiatives include the pan-European process that led to the publication of Sustainable Forest Management Criteria and Indicators, and other forums that highlight the link between finished wood-based products and the sustainability of the forests from which that wood is sourced. Those concepts were the culture in which forest certification systems were engendered, first FSC, promoted by environmental NGOs, and subsequently PEFC, fostered in response to FSC by private forest owners and forest-based industries. In its Introduction, this paper looks at how such concern arose and has evolved and how certification systems came into existence in Spain and developed to encompass both forest lands and forest-based products. As part of a mission to provide an applicable technical tool, new methodologies and technical proposals have been put forward over the past fifteen years aimed at guaranteeing the sustainable origin of the forest from which raw material is sourced. Although the maintenance of forest stands as a term in its own right is important, it does not take many of the aspects included in the concept of “sustainable forest management” into account. This thesis describes what SFM is and how it was born, underlying the close link between SFM and the origin of certification as a tool, explaining how Spanish forest certification is embodied in international structures, while new structures are built here in Spain on both the national and regional scale. This work also details the domain and scope of forest certification from the technical standpoint, explains its beginnings, and assesses the various systems and labels that exist - how certification has evolved internationally and nationally across systems, sectors and continents, with special emphasis on Spain. It provides a compilation of events relevant to forestry, forest industries and forest certification systems that have taken place during the years this thesis has been in preparation. It reflects on the relevance that forest and chain of custody certification holds for the paper industry, in view not only of the regulations, policies and legislation that affect forest-based products but also of its role as a tool that bonds the sustainable forest with the consumer. Implementing the range of technical specifications to demonstrate forest sustainability and traceability throughout the production process entails the administrative burden of collecting information and providing controls to process the relevant records and documents to be kept on file in compliance with the requirements made by forest certification schemes. It is therefore important to define a generic method, together with its relevant procedures,that fits the management systems (quality / environmental / integrated)existing today in pulp and paper companies, in order to implement a generic Chain of Custody scheme (common to FSC and PEFC) in a pulp and paper mill, and a due diligence system. To achieve that, it has first been necessary to analyse the production line and establish points along the route where traceabilitycontrols need to be implemented and points where raw material, semi-finished goods and end products should be monitored and recorded. Subsequently, the procedures in quality / environmental management systems need to be drafted or amended as required to include fields that reflect those records. As required by the procedures, forest-based products that have a specific characteristic shall be monitored and recorded, and a number of indicators identified in the traceability system of wood for pulp & paper, i.e.createa set of quantitative and descriptive parameters subject to regular monitoringthat reveal changes and enable the Chain of Custody system to be assessed and controlled. In addition to ensuring the traceability of wood and fibre in the pulp and paper industry -and so the sustainability of the forest from which it is sourced -, the legality of the harvesting that produces that timber will also be enhanced, thus fulfilling not only the law but also both FSC and PEFC certification schemes. The chain of custody system for pulp and paper is characterised by monitoring indicators that enable traceability to be controlled.

A rapid classification protocol for the CATH Domain Database to support structural genomics

In order to support the structural genomic initiatives, both by rapidly classifying newly determined structures and by suggesting suitable targets for structure determination, we have recently developed several new protocols for classifying structures in the CATH domain database (http://www.biochem.ucl.ac.uk/bsm/cath). These aim to increase the speed of classification of new structures using fast algorithms for structure comparison (GRATH) and to improve the sensitivity in recognising distant structural relatives by incorporating sequence information from relatives in the genomes (DomainFinder). In order to ensure the integrity of the database given the expected increase in data, the CATH Protein Family Database (CATH-PFDB), which currently includes 25 320 structural domains and a further 160 000 sequence relatives has now been installed in a relational ORACLE database. This was essential for developing more rigorous validation procedures and for allowing efficient querying of the database, particularly for genome analysis. The associated Dictionary of Homologous Superfamilies [Bray,J.E., Todd,A.E., Pearl,F.M.G., Thornton,J.M. and Orengo,C.A. (2000) Protein Eng., 13, 153–165], which provides multiple structural alignments and functional information to assist in assigning new relatives, has also been expanded recently and now includes information for 903 homo­logous superfamilies. In order to improve coverage of known structures, preliminary classification levels are now provided for new structures at interim stages in the classification protocol. Since a large proportion of new structures can be rapidly classified using profile-based sequence analysis [e.g. PSI-BLAST: Altschul,S.F., Madden,T.L., Schaffer,A.A., Zhang,J., Zhang,Z., Miller,W. and Lipman,D.J. (1997) Nucleic Acids Res., 25, 3389–3402], this provides preliminary classification for easily recognisable homologues, which in the latest release of CATH (version 1.7) represented nearly three-quarters of the non-identical structures.

Crystal structure of cytochrome P450 14α-sterol demethylase (CYP51) from Mycobacterium tuberculosis in complex with azole inhibitors

Cytochrome P450 14α-sterol demethylases (CYP51) are essential enzymes in sterol biosynthesis in eukaryotes. CYP51 removes the 14α-methyl group from sterol precursors such as lanosterol, obtusifoliol, dihydrolanosterol, and 24(28)-methylene-24,25-dihydrolanosterol. Inhibitors of CYP51 include triazole antifungal agents fluconazole and itraconazole, drugs used in treatment of topical and systemic mycoses. The 2.1- and 2.2-Å crystal structures reported here for 4-phenylimidazole- and fluconazole-bound CYP51 from Mycobacterium tuberculosis (MTCYP51) are the first structures of an authentic P450 drug target. MTCYP51 exhibits the P450 fold with the exception of two striking differences—a bent I helix and an open conformation of BC loop—that define an active site-access channel running along the heme plane perpendicular to the direction observed for the substrate entry in P450BM3. Although a channel analogous to that in P450BM3 is evident also in MTCYP51, it is not open at the surface. The presence of two different channels, with one being open to the surface, suggests the possibility of conformationally regulated substrate-in/product-out openings in CYP51. Mapping mutations identified in Candida albicans azole-resistant isolates indicates that azole resistance in fungi develops in protein regions involved in orchestrating passage of CYP51 through different conformational stages along the catalytic cycle rather than in residues directly contacting fluconazole. These new structures provide a basis for rational design of new, more efficacious antifungal agents as well as insight into the molecular mechanism of P450 catalysis.

Projeto e desenvolvimento de uma arquitetura de baixo consumo de potência para microprocessadores.

O trabalho trata do projeto e do desenvolvimento de um processador de baixo consumo de potência, de forma simplificada, explorando técnicas de microarquitetura, para atingir menor consumo de potência. É apresentada uma sequência lógica de desenvolvimento, a partir de conceitos e estruturas básicas, até chegar a estruturas mais complexas e, por fim, mostrar a microarquitetura completa do processador. Esse novo modelo de processador é comparado com estudos prévios de três processadores, sendo o primeiro modelo síncrono, o segundo assíncrono e o terceiro uma versão melhorada do primeiro modelo, que inclui minimizações de registradores e circuitos. Uma nova metodologia de criação de padring de microcontroladores, baseada em reuso de informações de projetos anteriores, é apresentada. Essa nova metodologia foi criada para a rápida prototipagem e para diminuir possíveis erros na geração do código do padring. Comparações de resultados de consumo de potência e área são apresentadas para o processador desenvolvido e resultados obtidos com a nova metodologia de geração de padring também são apresentados. Para o processador, um modelo, no qual se utilizam múltiplos barramentos para minimizar o número de ciclos de máquina por instrução, é apresentado. Também foram ressaltadas estruturas que podem ser otimizadas e circuitos que podem ser reaproveitados para diminuir a quantidade de circuito necessário na implementação. Por fim, a nova implementação é comparada com os três modelos anteriores; os ganhos obtidos de desempenho com a implementação dessas estruturas foram de 18% que, convertidos em consumo de potência, representam economia de 13% em relação ao melhor caso dos processadores comparados. A tecnologia utilizada no desenvolvimento dos processadores foi CMOS 250nm da TSMC.

Mesostructured zeolites: bridging the gap between zeolites and MCM-41

Surfactant-templating is one of the most versatile and useful techniques to implement mesoporous systems into solid materials. Various strategies based on various interactions between surfactants and solid precursors have been explored to produce new structures. Zeolites are invaluable as size- and shape-selective solid acid catalysts. Nevertheless, their micropores impose limitations on the mass transport of bulky feed and/or product molecules. Many studies have attempted to address this by utilizing surfactant-assisting technology to alleviate the diffusion constraints. However, most efforts have failed due to micro/mesopore phase separation. Recently, a new technique combining the uses of cationic surfactants and mild basic solutions was introduced to synthesise mesostructured zeolites. These materials sustain the unique characteristics of zeolites (i.e., strong acidity, crystallinity, microporosity, and hydrothermal stability), including tunable mesopore sizes and degrees of mesoporosity. The mesostructured zeolites are now commercially available through Rive Technology, and show superior performance in VGO cracking. This feature article provides an overview of recent explorations in the introduction of mesoporosity into zeolites using surfactant-templating techniques. Various porous materials, preparation methods, physical and catalytic properties of mesostructured zeolites will be discussed.

Chain scission and branching in irradiated poly(tetrafluoroethylene-co-hexafluoropropylene)

The radiation chemistry of poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) with a TFE mole fraction of 0.90 has been studied under vacuum using Co-60 gamma-radiation over a range of temperatures and absorbed doses. The radiolysis temperatures were 300, 363, 423, 523 and 543 K. New structure formation in the copolymers was analysed by solid-state F-19 NMR spectroscopy. The new structures formed in the copolymers have been identified and the G-values for the formation of new chemical structures have been investigated at 363 and 523 K. These two temperatures are just above and just below the polymer T-g and T-m, respectively. At the lower temperature, there was no evidence for any chain branching and an estimate of G(S) of 1.0 was obtained. A value of G(S) of 1.3 and a minimum value of G(X)(Y) of 1.3 were obtained at 523 K. (C) 2003 Society of Chemical Industry.

The 1000 brightest HIPASS galaxies H I properties

We present the HIPASS Bright Galaxy Catalog (BGC), which contains the 1000 H I brightest galaxies in the southern sky as obtained from the H i Parkes All-Sky Survey ( HIPASS). The selection of the brightest sources is based on their H I peak flux density (S-peak greater than or similar to116 mJy) as measured from the spatially integrated HIPASS spectrum. The derived H I masses range from similar to10(7) to 4 x 10(10) M-.. While the BGC ( z< 0.03) is complete in S-peak, only a subset of &SIM;500 sources can be considered complete in integrated H I flux density (F-H I &GSIM;25 Jy km s(-1)). The HIPASS BGC contains a total of 158 new redshifts. These belong to 91 new sources for which no optical or infrared counterparts have previously been cataloged, an additional 51 galaxies for which no redshifts were previously known, and 16 galaxies for which the cataloged optical velocities disagree. Of the 91 newly cataloged BGC sources, only four are definite H I clouds: while three are likely Magellanic debris with velocities around 400 km s(-1), one is a tidal cloud associated with the NGC 2442 galaxy group. The remaining 87 new BGC sources, the majority of which lie in the zone of avoidance, appear to be galaxies. We identified optical counterparts to all but one of the 30 new galaxies at Galactic latitudes > 10degrees. Therefore, the BGC yields no evidence for a population of free-floating'' intergalactic H I clouds without associated optical counterparts. HIPASS provides a clear view of the local large-scale structure. The dominant features in the sky distribution of the BGC are the Supergalactic Plane and the Local Void. In addition, one can clearly see the Centaurus Wall, which connects via the Hydra and Antlia Clusters to the Puppis Filament. Some previously hardly noticable galaxy groups stand out quite distinctly in the H I sky distribution. Several new structures, including some not behind the Milky Way, are seen for the first time.

Chemistry of phospholipid oxidation

The oxidation of lipids has long been a topic of interest in biological and food sciences, and the fundamental principles of non-enzymatic free radical attack on phospholipids are well established, although questions about detail of the mechanisms remain. The number of end products that are formed following the initiation of phospholipid peroxidation is large, and is continually growing as new structures of oxidized phospholipids are elucidated. Common products are phospholipids with esterified isoprostane-like structures and chain-shortened products containing hydroxy, carbonyl or carboxylic acid groups; the carbonyl-containing compounds are reactive and readily form adducts with proteins and other biomolecules. Phospholipids can also be attacked by reactive nitrogen and chlorine species, further expanding the range of products to nitrated and chlorinated phospholipids. Key to understanding the mechanisms of oxidation is the development of advanced and sensitive technologies that enable structural elucidation. Tandem mass spectrometry has proved invaluable in this respect and is generally the method of choice for structural work. A number of studies have investigated whether individual oxidized phospholipid products occur in vivo, and mass spectrometry techniques have been instrumental in detecting a variety of oxidation products in biological samples such as atherosclerotic plaque material, brain tissue, intestinal tissue and plasma, although relatively few have achieved an absolute quantitative analysis. The levels of oxidized phospholipids in vivo is a critical question, as there is now substantial evidence that many of these compounds are bioactive and could contribute to pathology. The challenges for the future will be to adopt lipidomic approaches to map the profile of oxidized phospholipid formation in different biological conditions, and relate this to their effects in vivo. This article is part of a Special Issue entitled: Oxidized phospholipids-their properties and interactions with proteins.

Chapter 1 : nucleobases with designed patterns of hydrogen bonding

The chemistry used in key bond-forming steps to prepare nucleobases with designed patterns of hydrogen bonding is surveyed. Incorporation of the nucleobases into DNA and RNA oligomers is achieved either chemically using building blocks such as nucleoside phosphoramidites or enzymatically using nucleotide triphosphates. By varying the hydrogen bonding pattern within nucleobases, and by incorporating additional substituents, new structures have been designed that "reach over" so that contacts with both strands in targeted duplex DNA can be made in antigene strategies to control gene expression. Various new base-pairing systems have been evaluated that expand the genetic alphabet beyond Watson-Crick base pairs A.T and G.C. For example, benzo-homologated analogs of the natural DNA bases represent a new genetic set of orthogonal, size-expanded derivatives that have been shown to encode amino acids of a protein in a living organism.

Project financing 8th edition

The eighth edition is a fundamental and essential update to the seventh edition published in 2000. This new edition examines a comprehensive range of existing and newer topics that are relevant to project financing in 2012 and explores current trends in the project finance and leasing industries. Contributors are experienced academics and practitioners. Since the first edition was published, the financial markets have undergone tremendous upheavals and many new structures and instruments have been created to meet the financing needs of business. This edition considers the wider world of project finance, applicable to such diverse situations as venture capital and leveraged buyouts, and using new approaches such as Islamic finance techniques. The eighth edition is an essential and over-due update to the previous edition published in 2000. The eighth edition updates a comprehensive review of financial and related topics which are relevant to project financing in 2012 and explores current trends in financial modelling of a project, risk management and the private finance initiatives. This is a comprehensive and practical book full of advice and tips for successful project financing, including leasing, offering a clear, easy to understand guide to a complex area with examples. The topic coverage is well organized and complete moving from the fundamentals to the more complex issues. There is an extensive glossary to support readers. Finally the use of 12 practitioner case studies brings many of these complex issues to life. This is the new edition of the clear, easy-to-understand industry-standard text on project financing. With a good overview of a broad area and using principles of project financing to explain complex structures, this book includes lots of examples and case studies (including Eurotunnel, Dabhol, multiple Paiton deals and other recent deals along with subsequent developments) to show the concepts in use, examine outcomes and to ensure you understand important issues such as effective project structuring and financing, financial modelling for project valuation, and risk management. Substantially updated and expanded to provide the latest developments in all aspects of project financing. An important manual reference, this book is a must-have for every project financier's desk. The text unites the domain of project financing with a wealth of project management techniques, supported by diagrams and charts and other pictorial features, where appropriate. All these supporting features facilitate a better understanding of the accompanying text for the reader. In many chapters there are diagrams to clarify the specific transaction structure discussed in the accompanying text. These diagrams enable the reader to get a very clear idea of the transaction structure, which is particularly useful where it is complex or unusual. There are also a number of checklists to assist stakeholders in the project and resource management of complex project financings. The new financial modelling chapters allow exploration of some of the pitfalls project models encounter, challenging the accurate replication of the project cash flows for stakeholders to evaluate. In the later new risk management chapters, worked examples are included to illustrate the techniques in practice. The new public private partnership/private finance initiatives chapter introduces readers to this new approach to public projects. References are made to useful websites throughout the text. Cases are included at the end of the main text to encourage examination of real-life examples of project financing in practice and also highlight specific issues of current interest. The book will be helpful to project finance sponsors, lawyers, host governments, bankers and providers of capital

Seawater carbonate chemistry, physiology and skeletal mineralogy of coralline alga Corallina elongata in a laboratory experiment

Marine organisms inhabiting environments where pCO2/pH varies naturally are suggested to be relatively resilient to future ocean acidification. To test this hypothesis, the effect of elevated pCO2 was investigated in the articulated coralline red alga Corallina elongata from an intertidal rock pool on the north coast of Brittany (France), where pCO2 naturally varied daily between 70 and 1000 µatm. Metabolism was measured on algae in the laboratory after they had been grown for 3 weeks at pCO2 concentrations of 380, 550, 750 and 1000 µatm. Net and gross primary production, respiration and calcification rates were assessed by measurements of oxygen and total alkalinity fluxes using incubation chambers in the light and dark. Calcite mol % Mg/Ca (mMg/Ca) was analysed in the tips, branches and basal parts of the fronds, as well as in new skeletal structures produced by the algae in the different pCO2 treatments. Respiration, gross primary production and calcification in light and dark were not significantly affected by increased pCO2. Algae grown under elevated pCO2 (550, 750 and 1000 µatm) formed fewer new structures and produced calcite with a lower mMg/Ca ratio relative to those grown under 380 µatm. This study supports the assumption that C. elongata from a tidal pool, where pCO2 fluctuates over diel and seasonal cycles, is relatively robust to elevated pCO2 compared to other recently investigated coralline algae.

Convex Optimization Algorithms and Statistical Bounds for Learning Structured Models

Thesis (Ph.D.)--University of Washington, 2016-08

Electrical and dielectric properties of uncoated and coated wood-free paper for electrophotography

The print substrate influences the print result in dry toner electrophotography, which is a widely used digital printing method. The influence of the substrate can be seen more easily in color printing, as that is a more complex process compared to monochrome printing. However, the print quality is also affected by the print substrate in grayscale printing. It is thus in the interests of both substrate producers and printing equipment manufacturers to understand the substrate properties that influence the quality of printed images in more detail. In dry toner electrophotography, the image is printed by transferring charged toner particles to the print substrate in the toner transfer nip, utilizing an electric field, in addition to the forces linked to the contact between toner particles and substrate in the nip. The toner transfer and the resulting image quality are thus influenced by the surface texture and the electrical and dielectric properties of the print substrate. In the investigation of the electrical and dielectric properties of the papers and the effects of substrate roughness, in addition to commercial papers, controlled sample sets were made on pilot paper machines and coating machines to exclude uncontrolled variables from the experiments. The electrical and dielectric properties of the papers investigated were electrical resistivity and conductivity, charge acceptance, charge decay, and the dielectric permittivity and losses at different frequencies, including the effect of temperature. The objective was to gain an understanding of how the electrical and dielectric properties are affected by normal variables in papermaking, including basis weight, material density, filler content, ion and moisture contents, and coating. In addition, the dependency of substrate resistivity on the electric field applied was investigated. Local discharging did not inhibit transfer with the paper roughness levels that are normal in electrophotographic color printing. The potential decay of paper revealed that the charge decay cannot be accurately described with a single exponential function, since in charge decay there are overlapping mechanisms of conduction and depolarization of paper. The resistivity of the paper depends on the NaCl content and exponentially on moisture content although it is also strongly dependent on the electric field applied. This dependency is influenced by the thickness, density, and filler contents of the paper. Furthermore, the Poole-Frenkel model can be applied to the resistivity of uncoated paper. The real part of the dielectric constant ε’ increases with NaCl content and relative humidity, but when these materials cannot polarize freely, the increase cannot be explained by summing the effects of their dielectric constants. Dependencies between the dielectric constant and dielectric loss factor and NaCl content, temperature, and frequency show that in the presence of a sufficient amount of moisture and NaCl, new structures with a relaxation time of the order of 10-3 s are formed in paper. The ε’ of coated papers is influenced by the addition of pigments and other coating additives with polarizable groups and due to the increase in density. The charging potential decreases and the electrical conductivity, potential decay rate, and dielectric constant of paper increase with increasing temperature. The dependencies are exponential and the temperature dependencies and their activation energies are altered by the ion content. The results have been utilized in manufacturing substrates for electrophotographic color printing.

A produção do mobiliário urbano nos espaços públicos :o desenho do mobiliário urbano nos projetos de reordenamento das orlas do Rio Grande do Norte

This work aims to analyze and evaluate the Urban furniture designed to public areas according to the Revitalization planning for Rio Grande do Norte coastland, defining visual relations among urban elements in the landscape of revitalized public urban areas with cultural, paisagistic and touristic values and the design process used for developing urban furniture to those areas, observing the incoming consequences use to that process in a specific urban context which alters use, functions, cultural images as well as social values attributed to each particular place. Environmental perceptions, legibility of local cultural references and their representation through the design of urban elements, act in a positive or negative manner over the inhabitants cognition process of some particular revitalized area, determining new use and attributions to those areas. Designs for coastal urban interventions try excessively to standardize technical media, construction materials and planning configurations, creating artificial sceneries that segregates users, imposing new structures and usage, generating, consequently, the so called non-places and burlesque regionalism. The research is divided into 4 chapters: 1) Theoretical support (Industrial design; Urban furniture; Public urban spaces; Urban image and environmental perception; Urban occupation and interventions in coastland areas); 2) Methodological procedures and data collection; 3) Analysis of Rio Grande do Norte coastal areas and their urban interventions; 4) Final considerations and Industrial Design contributions to the subject