System Design: UML Activity and Sequence Diagrams

In this session we look at how to model flow of control and interactions between components using UML Activity and Sequence Diagrams. This is an introductory session and so for Activity Diagrams we only cover branching, forks and joins and swim lanes, and for Sequence we cover lifelines, messages and returns, and alt, par and opt frames.

Systems Design: Activity and Sequence modelling using Visual Paradigm

This lab follows the lectures 'System Design: http://www.edshare.soton.ac.uk/9653/ and http://www.edshare.soton.ac.uk/6280/ . Students use Visual Paradigm for UML to build Activity and Sequence models through project examples: Library, Plant Nursery and a Health Spa

Design of a turn-linker-turn foldamer by incorporating meta-amino benzoic acid in the middle of a helix forming hexapeptide sequence: A helix breaking approach

Single crystal X-ray diffraction studies reveal that the incorporation of meta-amino benzoic acid in the middle of a helix forming hexapeptide sequence such as in peptide I Boc-Ile(1)-Aib(2)-Val(3)-m-ABA(4)-Ile(5)-Aib(6)-Leu(7)-OMe (Aib: alpha-amino isobutyric acid: m-ABA: meta-amino benzoic acid) breaks the helix propagation to produce a turn-linker-turn (T-L-T) foldamer in the solid state. In the crystalline state two conformational isomers of peptide I self-assemble in antiparallel fashion through intermolecular hydrogen bonds and aromatic pi-pi interactions to form a molecular duplex. The duplexes are further interconnected through intermolecular hydrogen bonds to form a layer of peptides. The layers are stacked one on top of the other through van der Waals interactions to form hydrophilic channels filled with solvent methanol. (C) 2009 Elsevier B.V. All rights reserved.

Fast Acquisition of (13)C NMR Spectra using the Steady-state Free Precession Sequence

In this paper, we show that the steady-state free precession sequence can be used to acquire (13)C high-resolution nuclear magnetic resonance spectra and applied to qualitative analysis. The analysis of brucine sample using this sequence with 60 degrees flip angle and time interval between pulses equal to 300 ms (acquisition time, 299.7 ms; recycle delay, 300 ms) resulted in spectrum with twofold enhancement in signal-to-noise ratio, when compared to standard (13)C sequence. This gain was better when a much shorter time interval between pulses (100 ms) was applied. The result obtained was more than fivefold enhancement in signal-to-noise ratio, equivalent to more than 20-fold reduction in total data recording time. However, this short time interval between pulses produces a spectrum with severe phase and truncation anomalies. We demonstrated that these anomalies can be minimized by applying an appropriate apodization function and plotting the spectrum in the magnitude mode.

Using genetic algorithm to design protein sequence

In this work, genetic algorithms concepts along with a rotamer library for proteins side chains are used to optimize the tertiary structure of the hydrophobic core of Cytochrome b(562) starting from the known PDB structure of its backbone which is kept fixed while the side chains of the hydrophobic core are allowed to adopt the conformations present in the rotamer library. The atoms of the side chains forming the core interact via van der Waals energy. Besides the prediction of the native core structure, it is also suggested a set of different amino acid sequences for this core. Comparison between these new cores and the native are made in terms of their volumes, van der Waals energies values and the numbers of contacts made by the side chains forming the cores. This paper proves that genetic algorithms area efficient to design new sequence for the protein core. (C) 2007 Elsevier B.V. All rights reserved.

Design, Synthese und biochemische/biologische Evaluierung bioisosterer Oligopyrrolcarboxamide mit aliphatisch-amidisch verknüpften DNA-Interkalatoren

Die DNA stellt aufgrund der genetischen Krankheitsursache nach wie vor ein überaus attraktives Target für das Design antitumoraktiver Zytostatika dar. Ein wesentlicher Schwerpunkt der heutigen Forschung besteht vor allem in der Entwicklung niedermolekularer, sequenzspezifischer DNA-Liganden zur gezielten Ausschaltung defekter Gene. Im Rahmen dieser Arbeit erfolgte daher in Anlehnung an die antitumoral wirksame Leitsubstanz Netropsin - ein AT-selektiver Minor Groove Binder mit Bispyrrolcarboxamid-Grundstruktur - erstmals der systematische Aufbau einer neuen Serie bioisosterer Hybridmoleküle, bestehend aus einem interkalierenden Strukturelement (Acridon, Naphthalimid, 5-Nitronaphthalimid, Anthrachinon, 11H-Pyrido[2,3-a]carbazol) und Thiophenpyrrol-, Imidazolpyrrol-, Thiazolpyrrol- bzw. Bisimidazolcarboxamid als rinnenbindende Oligoamid-Einheit (sog. Combilexine). Die chromophoren Systeme am N-Terminus wurden hierbei über aliphatische Linker variabler Kettenlänge mit der Carboxamid-Kette verknüpft. Als C-terminale Funktion kam sowohl die N,N-Dimethyl-1,3-diaminopropan- als auch die um ein C-Atom kürzere Dimethylaminoethylamin-Seitenkette zum Einsatz. Unter Verwendung modernster Reagenzien aus der Peptidkupplungschemie ist es gelungen, ein präparativ gut zugängliches, reproduzierbares Verfahren zur Synthese dieser bioisosteren Combilexine zu entwickeln. Anhand biophysikalischer/biochemischer, zellbiologischer und physikochemischer (1H-NMR-spektroskopischer und röntgenstrukturanalytischer) Methoden sowie Molecular Modelling Studien wurden erstmals bezüglich der DNA-Bindung, der Topoisomerase-Hemmung und der Antitumor-Zellzytotoxizität in einem breiten Rahmen vororientierende Struktur-Wirkungsbeziehungen an bioisosteren Liganden erstellt. Wenngleich zwischen den in vitro und in silico ermittelten Befunden keine konkreten Gesetzmäßigkeiten zu erkennen waren, so ließ die Summation der Ergebnisse dennoch darauf schließen, dass es sich bei den Naphthalimidpropion- und Acridonbuttersäure-Derivaten mit C-terminaler Propylendiamin-Funktion um die aussichtsreichsten Kandidaten in Bezug auf die DNA-Affinität bzw. Zytotoxizität handelte.

Design of artificial sequence-specific DNA bending ligands.

Proteins that bend DNA are important regulators of biological processes. Sequence-specific DNA bending ligands have been designed that bind two noncontiguous sites in the major groove and induce a bend in the DNA. An oligonucleotide containing pyrimidine segments separated by a central variable linker domain simultaneously binds by triple helix formation two 15-bp purine tracts separated by 10 bp. Bend angles of 61 degrees, 50 degrees, and 38 degrees directed towards the minor groove were quantitated by phasing analysis for linkers of four, five, and six T residues, respectively. The design and synthesis of nonnatural architectural factors may provide a new class of reagents for use in biology and human medicine.

A novel suite of cyclotides from Viola odorata: sequence variation and the implications for structure, function and stability

Cyclotides are a fascinating family of plant-derived peptides characterized by their head-to-tail cyclized backbone and knotted arrangement of three disulfide bonds. This conserved structural architecture, termed the CCK (cyclic cystine knot), is responsible for their exceptional resistance to thermal, chemical and enzymatic degradation. Cyclotides have a variety of biological activities, but their insecticidal activities suggest that their primary function is in plant defence. In the present study, we determined the cyclotide content of the sweet violet Viola odorata, a member of the Violaceae family. We identified 30 cyclotides from the aerial parts and roots of this plant, 13 of which are novel sequences. The new sequences provide information about the natural diversity of cyclotides and the role of particular residues in defining structure and function. As many of the biological activities of cyclotides appear to be associated with membrane interactions, we used haemolytic activity as a marker of bioactivity for a selection of the new cyclotides. The new cyclotides were tested for their ability to resist proteolysis by a range of enzymes and, in common with other cyclotides, were completely resistant to trypsin, pepsin and thermolysin. The results show that while biological activity varies with the sequence, the proteolytic stability of the framework does not, and appears to be an inherent feature of the cyclotide framework. The structure of one of the new cyclotides, cycloviolacin O14, was determined and shown to contain the CCK motif. This study confirms that cyclotides may be regarded as a natural combinatorial template that displays a variety of peptide epitopes most likely targeted to a range of plant pests and pathogens.

Sequence distributions in free-radical polymers

This thesis is concerned with demonstrating how the visual representation of the sequence distribution of individual monomer units, of a polymer, that would be observed upon polymerisation, may be utilised in designing and synthesizing polymers with relatively low cell adhesion characteristics, The initial part of this thesis is concerned with demonstrating the use of a computer simulation technique, in illustrating the sequence distribution that would be observed upon the polymerisation of a set of monomers. The power of the computer simulation technique has been demonstrated through the simulation of the sequence distributions of some generic contact lens materials. These generic contact lens materials were chosen simply because in the field of biomaterials their compositions are amongst the most systematically regulated and they present a wide range of compositions. The validity of the computer simulation technique has been assessed through the synthesis and analysis of linear free-radical polymers at different conversions. Two main parameters were examined, that of composition and the number-average sequence lengths of individual monomer units, at various conversions. The polymers were synthesized through the solution polymerisation process. The monomer composition was determined by elemental analysis and 13C nuclear magnetic analysis (NMR). Number-average sequence lengths were determined exclusively through 13C NMR. Although the computer simulation technique provides a visual representation of the monomer sequence distribution up to 100% conversion, these assessments were made on linear polymers at a reasonably high conversion (above 50%) but below 100% conversion of ease for analysis. The analyses proved that the computer simulation technique was reasonably accurate in predicting the sequence distribution of monomer units, upon polymerisation, in the polymer.An approach has been presented which allows one to manipulate the use of monomers, with their reactivity ratios, thereby enabling us to design polymers with controlled sequence distributions.Hydrogel membranes, with relatively controlled sequence distributions and polymerised to 100% conversion, were synthesized to represent prospective biomaterials. Cell adhesion studies were used as a biological probe to investigate the susceptibility of the surface of these membranes to cell adhesion. This was necessary in order to assess the surface biocompatibility or biotolerance of these prospective biomaterials.

Design and construction of an ultrasonic probe for use in a Cryo-Magnet NMR Spectrometer

SINNMR (Sonically Induced Narrowing of the Nuclear Magnetic Resonance spectra of solids), is a novel technique that is being developed to enable the routine study of solids by nuclear magnetic resonance spectroscopy. SINNMR aims to narrow the broad resonances that are characteristic of solid state NMR by inducing rapid incoherent motion of solid particles suspended in a support medium, using high frequency ultrasound in the range 2-10 MHz. The width of the normal broad resonances from solids are due to incomplete averaging of several components of the total spin Hamiltonian caused by restrictions placed on molecular motion within a solid. At present Magic Angle Spinning (MAS) NMR is the classical solid state technique used to reduce line broadening, but: this has associated problems, not least of which is the appearance of many spinning side bands which confuse the spectra. It is hoped that SlNNMR will offer a simple alternative, particularly as it does not reveal spinning sidebands The fundamental question concerning whether the use of ultrasound within a cryo-magnet will cause quenching has been investigated with success, as even under the most extreme conditions of power, frequency and irradiator time, the magnet does not quench. The objective of this work is to design and construct a SINNMR probe for use in a super conducting cryo-magnet NMR spectrometer. A cell for such a probe has been constructed and incorporated into an adapted high resolution broadband probe. It has been proved that the cell is capable of causing cavitation, up to 10 MHz, by running a series of ultrasonic reactions within it and observing the reaction products. It was found that the ultrasound was causing the sample to be heated to unacceptable temperatures and this necessitated the incorporation of temperature stabilisation devices. Work has been performed on the investigation of the narrowing of the solid state 23Na spectrum of tri-sodium phosphate using high frequency ultrasound. Work has also been completed on the signal enhancement and T1 reduction of a liquid mixture and a pure compound using ultrasound. Some preliminary "bench" experiments have been completed on a novel ultrasonic device designed to help minimise sample heating. The concept involves passing the ultrasound through a temperature stabilised, liquid filled funnel that has a drum skin on the end that will enable the passage of ultrasound into the sample. Bench experiments have proved that acoustic attenuation is low and that cavitation in the liquid beyond the device is still possible.

The use of driven equilibrium conditions in the measurement of NMR relaxation times

The further development of the use of NMR relaxation times in chemical, biological and medical research has perhaps been curtailed by the length of time these measurements often take. The DESPOT (Driven Equilibrium Single Pulse Observation of T1) method has been developed, which reduces the time required to make a T1 measurement by a factor of up to 100. The technique has been studied extensively herein and the thesis contains recommendations for its successful experimental application. Modified DESPOT type equations for use when T2 relaxation is incomplete or where off-resonance effects are thought to be significant are also presented. A recently reported application of the DESPOT technique to MR imaging gave good initial results but suffered from the fact that the images were derived from spin systems that were not driven to equilibrium. An approach which allows equilibrium to be obtained with only one non-acquisition sequence is presented herein and should prove invaluable in variable contrast imaging. A DESPOT type approach has also been successfully applied to the measurement of T1. T_1's can be measured, using this approach significantly faster than by the use of the classical method. The new method also provides a value for T1 simultaneously and therefore the technique should prove valuable in intermediate energy barrier chemical exchange studies. The method also gives rise to the possibility of obtaining simultaneous T1 and T1 MR images. The DESPOT technique depends on rapid multipulsing at nutation angles, normally less than 90^o. Work in this area has highlighted the possible time saving for spectral acquisition over the classical technique (90^o-5T_1)_n. A new method based on these principles has been developed which permits the rapid multipulsing of samples to give T_1 and M_0 ratio information. The time needed, however, is only slightly longer than would be required to determine the M_0 ratio alone using the classical technique. In ^1H decoupled ^13C spectroscopy the method also gives nOe ratio information for the individual absorptions in the spectrum.

Grating design of oppositely chirped FBGs for pulse shaping

In this letter, we analyze and develop the required basis for a precise grating design in a scheme based on two oppositely chirped fiber Bragg gratings, and apply it in several examples which are numerically simulated. We obtain the interesting result that the broader bandwidth of the reshaped pulse, the shorter gratings required.

Proposal and design of phase-modulated fiber gratings in transmission for pulse shaping

A novel approach to pulse shaping using a phase-modulated fiber Bragg grating (FBG) in transmission is proposed and designed. We show that phase-modulated FBGs can provide transmission responses suitable for pulse shaping applications, offering important technological feasibility benefits, since the coupling strength remains basically uniform in the grating. Moreover, this approach retains the substantial advantages of FBGs in transmission, such as optimum energy efficiency, no requirement for an optical circulator, and robustness against fabrication errors.