Effect of the competition of Cu(II) and Ni(II) on the kinetic and thermodynamic stabilities of Cr(III)-organic ligand complexes using competitive ligand exchange (EDTA)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Supramolecular organization-electrical properties relation in nanometric organic films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Organic fertilization of peach trees: implication on nitrogen availability, root growth and carbon distribution within plant

In the last years, sustainable horticulture has been increasing; however, to be successful this practice needs an efficient soil fertility management to maintain a high productivity and fruit quality standards. For this purpose composted organic materials from agri-food industry and municipal solid waste has been used as a source to replace chemical fertilizers and increase soil organic matter. To better understand the influence of compost application on soil fertility and plant growth, we carried out a study comparing organic and mineral nitrogen (N) fertilization in micro propagated plants, potted trees and commercial peach orchard with these aims: 1. evaluation of tree development, CO2 fixation and carbon partition to the different organs of two-years-old potted peach trees. 2. Determination of soil N concentration and nitrate-N effect on plant growth and root oxidative stress of micro propagated plant after increasing rates of N applications. 3. Assessment of soil chemical and biological fertility, tree growth and yield and fruit quality in a commercial orchard. The addition of compost at high rate was effective in increasing CO2 fixation, promoting root growth, shoot and fruit biomass. Furthermore, organic fertilizers influenced C partitioning, favoring C accumulation in roots, wood and fruits. The higher CO2 fixation was the result of a larger tree leaf area, rather than an increase in leaf photosynthetic efficiency, showing a stimulation of plant growth by application of compost. High concentrations of compost increased total soil N concentration, but were not effective in increasing nitrate-N soil concentration; in contrast mineral-N applications increased linearly soil nitrate-N, even at the lowest rate tested. Soil nitrate-N concentration influenced positively plant growth at low rate (60- 80 mg kg-1), whereas at high concentrations showed negative effects. In this trial, the decrease of root growth, as a response to excessive nitrate-N soil concentration, was not anticipated by root oxidative stress. Continuous annual applications of compost for 10 years enhanced soil organic matter content and total soil N concentration. Additionally, high rate of compost application (10 t ha-1 year-1) enhanced microbial biomass. On the other hand, different fertilizers management did not modify tree yield, but influenced fruit size and precocity index. The present data support the idea that organic fertilizers can be used successfully as a substitute of mineral fertilizers in fruit tree nutrient management, since they promote an increase of soil chemical and biological fertility, prevent excessive nitrate-N soil concentration, promote plant growth and potentially C sequestration into the soil.

Thiophene- Based Materials for Photovoltaic Applications

Thiophene oligomers (OTs) and polymers (PTs) are currently attracting remarkable attention as organic materials showing semiconducting, fluorescent, nonlinear optical and liquid crystalline properties. All these properties can be fine-tuned through minor structural modifications. As a consequence, thiophene oligomers and polymers are among the most investigated compounds for applications in organic electronics, optoelectronics and thin film devices such as field effect transistors (FETs), light emitting diodes (LEDs) and photovoltaic devices (PVDs). Our research aims to explore the self-assembly features and the optical, electrical and photovoltaic properties of a class of thiophene based materials so far scarcely investigated, namely that of oligo- and polythiophenes head-to-head substituted with alkyl or S-alkyl chains. In particular, we synthesized these compounds in short reaction times, high yields, high purity and environmentally friendly procedures taking advantage of ultrasound (US) and microwave (MW) enabling technologies in Suzuki-Miyaura cross-couplings.

Extended donor and acceptor molecules for organic electronics

Die Untersuchung von halbleitenden Materialien auf der Basis von organischen Molekülen stellt ein Gebiet der angewandten Forschung an der Schwelle zur industriellen Nutzung dar. Geringes Gewicht und hohe mechanische Flexibilität ermöglichen völlig neue Produkte, die mit anorganischen Halbleitern nicht zu realisieren sind. Die Herstellung von Bauteilen wie Transistoren, Solarzellen oder Leuchtdioden aus organischen Materialien ist ein komplexes Gebiet, das einer Vielzahl von unterschiedlichen Optimierungen bedarf, um eine konkurrenzfähige Leistung zu erreichen. Die synthetische organische Chemie bietet vielfältige Möglichkeiten, mit maßgeschneiderten Lösungen zum Optimierungsprozess beizutragen. Zum einen können neue aktive Materialien hergestellt werden mit besserer Leistung und leichterer Verarbeitbarkeit. Zum anderen sind Substanzen zugänglich, die z.B. bei der Ladungsträgerinjektion hilfreich sein können.rnIn dieser Arbeit wurde an beiden dieser Fronten gearbeitet. Dabei lag die Entwicklungsstrategie darin, ausgedehnte π-konjugierte Moleküle herzustellen, die entweder besonders elektronenarme Akzeptoren oder elektronenreiche Donoren darstellen. Die genaue Kontrolle der elektronischen Niveaus stellt einen wichtigen Bestandteil dar, um niedrige elektrische Kontaktbarrieren zu Metallen zu erreichen und ausreichend stabile Materialien zu erreichen.rnDer erste Fokus der Arbeiten lag in der Funktionalisierung von Coronen. Dieser PAH stellt einen guten Kompromiss bezüglich seiner Größe dar: Er ist groß genug, um Diffusion in andere Schichten von Bauteilen zu vermeiden, aber nicht zu groß, um Verarbeitung durch Vakuumsublimation zu ermöglichen. Bislang sind praktisch keine Coronen-Derivate in der Literatur beschrieben, weshalb eine neue Synthese entwickelt werden musste, die die Einführung starker Donor- und Akzeptorfunktionalitäten erlaubt. Die photochemische Cyclodehydrierung von substituierten [2.2.2]paracyclophan-trienen stellte sich als hervorragende Möglichkeit heraus, dies zu bewerkstelligen. Es wurde eine Reihe von methoxy-substitutierten Coronenen mit unterschiedlicher Symmetrie hergestellt. Mittels optischer Spektroskopie konnte gezeigt werden, dass Methoxygruppen wenig Einfluss auf die elektronischen Eigenschaften von Coronen haben. Unter Spaltung der Methylether und anschließender Oxidation allerdings sind Coronenketone zugänglich, welche bis zu drei α-Diketongruppen besitzen. Diese Moleküle sind enorm starke Akzeptoren, was durch Cyclovoltammetrie und Vergleich zu anderen Akzeptoren eindrucksvoll gezeigt werden konnte. Die Sublimation dieses Akzeptors auf die Oberfläche von Metallen zeigt einen dramatischen Einfluss auf die Austrittsarbeit dieses Metalls, was zur Herstellung eines ohmschen Kontakts zu organischen Halbleitern von außerordentlichem Nutzen ist. rnDen zweiten Teil der Arbeit bilden Benzodithiophen enthaltende Polymere, die für den Einsatz als aktive Komponente in elektronischen Bauteilen entwickelt wurden. Nach systematischer Strukturoptimierung wurde ein Polymer enthalten, welches in einem Feldeffekt-Transistor auf Standard-Silizium-Substraten Ladungsträger-Mobilitäten über 0,1 cm2/Vs erreicht mit großer Reproduzierbarkeit und ausgezeichneter Transistor-Charakteristik. Es konnte gezeigt werden, dass die durch die Monomergeometrie erzeugte Kurvung des Polymers zu einem optimalen Kompromiss aus Löslichkeit und effektiver Packung darstellt. Auf für industrielle Anwendungen besonders interessanten polymer-basierten Substraten wurde eine noch erheblich bessere Leistung gezeigt. Auf einem PET-Substrat wurden Feldeffekt-Mobilitäten von 0,5 cm2/Vs gemessen mit überzeugenden Reproduzierbarkeit und Stabilität.rnDamit konnte in der Arbeit ein bedeutender Beitrag zur Weiterentwicklung von Materialien für den Einsatz in elektronischen Bauteilen geleistet werden. Die Substanzen versprechen noch erhebliches Potenzial nach intensiver Optimierung und wurden deshalb zum Patent angemeldet.rn

Interfacial interactions, charge transport and growth phenomena in Organic Field Effect Transistors

Organic electronics is an emerging field with a vast number of applications having high potential for commercial success. Although an enormous progress has been made in this research area, many organic electronic applications such as organic opto-electronic devices, organic field effect transistors and organic bioelectronic devices still require further optimization to fulfill the requirements for successful commercialization. The main bottle neck that hinders large scale production of these devices is their performances and stability. The performance of the organic devices largely depends on the charge transport processes occurring at the interfaces of various material that it is composed of. As a result, the key ingredient needed for a successful improvement in the performance and stability of organic electronic devices is an in-depth knowledge of the interfacial interactions and the charge transport phenomena taking place at different interfaces. The aim of this thesis is to address the role of the various interfaces between different material in determining the charge transport properties of organic devices. In this framework, I chose an Organic Field Effect Transistor (OFET) as a model system to carry out this study as it An OFET offers various interfaces that can be investigated as it is made up of stacked layers of various material. In order to probe the intrinsic properties that governs the charge transport, we have to be able to carry out thorough investigation of the interactions taking place down at the accumulation layer thickness. However, since organic materials are highly instable in ambient conditions, it becomes quite impossible to investigate the intrinsic properties of the material without the influence of extrinsic factors like air, moisture and light. For this reason, I have employed a technique called the in situ real-time electrical characterization technique which enables electrical characterization of the OFET during the growth of the semiconductor.

Charge transport in organic photovoltaic cells

Die vorliegende Dissertation dient dazu, das Verständnis des Ladungstransportes in organischen Solarzellen zu vertiefen. Mit Hilfe von Computersimulationen wird die Bewegung von Ladungsträgern in organischen Materialien rekonstruiert, und zwar ausgehend von den quantenmechanischen Prozessen auf mikroskopischer Ebene bis hin zur makroskopischen Skala, wo Ladungsträgermobilitäten quantifizierbar werden. Auf Grundlage dieses skalenübergreifenden Ansatzes werden Beziehungen zwischen der chemischen Struktur organischer Moleküle und der makroskopischen Mobilität hergestellt (Struktur-Eigenschafts-Beziehungen), die zu der Optimierung photovoltaischer Wirkungsgrade beitragen. Das Simulationsmodell beinhaltet folgende drei Schlüsselkomponenten. Erstens eine Morphologie, d. h. ein atomistisch aufgelöstes Modell der molekularen Anordnung in dem untersuchten Material. Zweitens ein Hüpfmodell des Ladungstransportes, das Ladungswanderung als eine Abfolge von Ladungstransferreaktionen zwischen einzelnen Molekülen beschreibt. Drittens ein nichtadiabatisches Modell des Ladungstransfers, das Übergangsraten durch drei Parameter ausdrückt: Reorganisationsenergien, Lageenergien und Transferintegrale. Die Ladungstransport-Simulationen richten sich auf die Materialklasse der dicyanovinyl-substituierten Oligothiophene und umfassen Morphologien von Einkristallen, Dünnschichten sowie amorphen/smektischen Mesophasen. Ein allgemeiner Befund ist, dass die molekulare Architektur, bestehend aus einer Akzeptor-Donor-Akzeptor-Sequenz und einem flexiblen Oligomergerüst, eine erhebliche Variation molekularer Dipolmomente und damit der Lageenergien bewirkt. Diese energetische Unordnung ist ungewöhnlich hoch in den Kristallen und umso höher in den Mesophasen. Für die Einkristalle wird beobachtet, dass Kristallstrukturen mit ausgeprägter π-Stapelung und entsprechend großer Transferintegrale zu verhältnismäßig niedrigen Mobilitäten führen. Dieses Verhalten wird zurückgeführt auf die Ausbildung bevorzugter Transportrichtungen, die anfällig für energetische Störungen sind. Für die Dünnschichten bestätigt sich diese Argumentation und liefert ein mikroskopisches Verständnis für experimentelle Mobilitäten. In der Tat korrelieren die Simulationsergebnisse sowohl mit gemessenen Mobilitäten als auch mit photovoltaischen Wirkungsgraden. Für die amorphen/smektischen Systeme steigt die energetische Unordnung mit der Oligomerlänge, sie führt aber auch zu einer unerwarteten Mobilitätsabnahme in dem stärker geordneten smektischen Zustand. Als Ursache dafür erweist sich, dass die smektische Schichtung der räumlichen Korrelation der energetischen Unordnung entgegensteht.

Electron density building block approach for metal organic frameworks

A general introduction to the state of the art in modeling metal organic materials using transferable atomic multipoles is provided. The method is based on the building block partitioning of the electron density, which is illustrated with some examples of potential applications and with detailed discussions of the advantages and pitfalls. The interactions taking place between building blocks are summarized and are used to discuss the properties that can be calculated.

Materials properties from electron density distributions: Molecular magnetism and linear optical properties

The general goal of this thesis is correlating observable properties of organic and metal-organic materials with their ground-state electron density distribution. In a long-term view, we expect to develop empirical or semi-empirical approaches to predict materials properties from the electron density of their building blocks, thus allowing to rationally engineering molecular materials from their constituent subunits, such as their functional groups. In particular, we have focused on linear optical properties of naturally occurring amino acids and their organic and metal-organic derivatives, and on magnetic properties of metal-organic frameworks. For analysing the optical properties and the magnetic behaviour of the molecular or sub-molecular building blocks in materials, we mostly used the more traditional QTAIM partitioning scheme of the molecular or crystalline electron densities, however, we have also investigated a new approach, namely, X-ray Constrained Extremely Localized Molecular Orbitals (XC-ELMO), that can be used in future to extracted the electron densities of crystal subunits. With the purpose of rationally engineering linear optical materials, we have calculated atomic and functional group polarizabilities of amino acid molecules, their hydrogen-bonded aggregates and their metal-organic frameworks. This has enabled the identification of the most efficient functional groups, able to build-up larger electric susceptibilities in crystals, as well as the quantification of the role played by intermolecular interactions and coordinative bonds on modifying the polarizability of the isolated building blocks. Furthermore, we analysed the dependence of the polarizabilities on the one-electron basis set and the many-electron Hamiltonian. This is useful for selecting the most efficient level of theory to estimate susceptibilities of molecular-based materials. With the purpose of rationally design molecular magnetic materials, we have investigated the electron density distributions and the magnetism of two copper(II) pyrazine nitrate metal-organic polymers. High-resolution X-ray diffraction and DFT calculations were used to characterize the magnetic exchange pathways and to establish relationships between the electron densities and the exchange-coupling constants. Moreover, molecular orbital and spin-density analyses were employed to understand the role of different magnetic exchange mechanisms in determining the bulk magnetic behaviour of these materials. As anticipated, we have finally investigated a modified version of the X-ray constrained wavefunction technique, XC-ELMOs, that is not only a useful tool for determination and analysis of experimental electron densities, but also enables one to derive transferable molecular orbitals strictly localized on atoms, bonds or functional groups. In future, we expect to use XC-ELMOs to predict materials properties of large systems, currently challenging to calculate from first-principles, such as macromolecules or polymers. Here, we point out advantages, needs and pitfalls of the technique. This work fulfils, at least partially, the prerequisites to understand materials properties of organic and metal-organic materials from the perspective of the electron density distribution of their building blocks. Empirical or semi-empirical evaluation of optical or magnetic properties from a preconceived assembling of building blocks could be extremely important for rationally design new materials, a field where accurate but expensive first-principles calculations are generally not used. This research could impact the community in the fields of crystal engineering, supramolecular chemistry and, of course, electron density analysis.

(Table 1) Organic carbon isotopic composition in Cretaceous sediments at DSDP Hole 75-530A

Cretaceous sediments from DSDP Site 530 have been analyzed for organic carbon isotopic composition. The d13C values in the sediments decrease from -22.7 per mil to -27.5 per mil in the following order: light-olive green mudstone/claystone, dark brown-red mudstone/siltstone/claystone, and black shale. This large range is primarily the result of variation in the relative amounts of terrestrial organic carbon superimposed on that derived from marine organisms. The black shales have an average d13C value of -25.9 per mil (range is from -23.7 per mil to -27.5 per mil). These values indicate that they originated primarily in terrigenous organic materials. The average d13C value present throughout the Cretaceous suggests that a large amount of terrestrial organic matter was supplied into this paleoenvironment, except during the Campanian, when an average d13C of -23.9 per mil is found near the marine end of the range.

Organic geochemistry, visual composition, atomic ratios, and reflectance at DSDP Site 87-582, 87-583 and 87-584

Geochemical analyses of organic matter were carried out on Quaternary sediments from Sites 582 and 583 (Nankai Trough) and on Pliocene to Miocene sediments from Site 584 (Japan Trench), DSDP Leg 87, to evaluate petroleum-generating potential and to characterize the organic matter. The vitrinite-huminite reflectances of indigenous materials for these sites are less than 0.3% indicating the immature nature of the sediments. The sediments, however, contain remarkable amounts of recycled organic materials. The Quaternary sediments from Sites 582 and 583 contain small amounts of amorphous organic matter (less than 0.75 wt.% organic carbon and 66-90% amorphous debris), which is composed of predominantly recycled, oxidized, and over-matured (or matured) Type III material. The amount of hydrocarbon yield indicates that those sediments have lean-source potential for commercial hydrocarbon generation. The Pliocene to Miocene sediments from Site 584 contain organic matter (0.3-1.09 wt.% organic carbon) of predominantly amorphous debris (68-96%) that originated in two sources, an indigenous Type II material and a recycled, over-matured material. Pyrolysis shows an upward increase in the section of hydrocarbon yield and the same trend is also observed in organic-carbon content. The amount of the yield indicates that the Miocene sediments have lean-to-fair source potential and the Pliocene sediments have fair-to-good source potential.

Molecular dissolved organic matter composition in lakes across Sweden as relative intensities of FT-ICR-MS peaks and PARAFAC components and optical indices

Whether intrinsic molecular properties or extrinsic factors such as environmental conditions control the decomposition of natural organic matter across soil, marine and freshwater systems has been subject to debate. Comprehensive evaluations of the controls that molecular structure exerts on organic matter's persistence in the environment have been precluded by organic matter's extreme complexity. Here we examine dissolved organic matter from 109 Swedish lakes using ultrahigh-resolution mass spectrometry and optical spectroscopy to investigate the constraints on its persistence in the environment. We find that degradation processes preferentially remove oxidized, aromatic compounds, whereas reduced, aliphatic and N-containing compounds are either resistant to degradation or tightly cycled and thus persist in aquatic systems. The patterns we observe for individual molecules are consistent with our measurements of emergent bulk characteristics of organic matter at wide geographic and temporal scales, as reflected by optical properties. We conclude that intrinsic molecular properties are an important control of overall organic matter reactivity.

Alkenone UK37 measured in the upper water column at pump stations CariacoTrench, Peru and Vertex

A series of long-chain (C37, C38, C39), primarily di and tri-unsaturated methyl and ethyl ketones, first identified in sediments from Walvis Ridge off West Africa and from Black Sea (de Leeuw et al., 1979), has been found in marine sediments throughout the world (Brassell et al., 1986 doi:10.1038/320129a0). The marine coccolithophorid Emiliania huxleyi and members of the class Prymnesiophyceae are now the recognized sources of these compounds (Volkman et al., 1979; Marlowe, et al., 1984). Experiments with laboratory cultures of algae showed the degree of unsaturation in the ketone seris biosynthesized depends on growth temperature (Brassell et al., 1986; Marlowe, 1984), a physiological respons observed for classical membrane lipids (vanDeenen et al., 1972). Brassell and co-workers (Brassell et al., 198; Brassell et al., 1986b) thus proposed that systematic fluctuations in the unsaturation of these alkenones noted down-core in sediments from the Kane Gap region of the north-east tropical Atlantic Ocean and correlated with glacial-interglacial cycles provide an organic geochemical measure of past sea-surface water temperatures. Using laboratory cultures of E. huxleyi, we have calibrated changes in the unsaturation pattern of the long-chain ketone series versus growth temperature. The calibration curve is linear and accurtely predicts unsuturation patterns observed in natural particulate materials collected from oceanic waters of known temperature. We present evidence supporting the proposed paleotemperature hypothesis (Brassell et al., 1986, Brassel et al., 1986b) and suggesting absolute 'sea-surface temperatures' for a given oceanic location can be estimated from an analysis of long-chain ketone compositions preserved in glacial and interglacial horizons of deep-sea sediment cores.

Valoración de Indicadores de calidad para el diseño e implementación de tecnologías de manejo en Luvisoles de la zona norte de la provincia de Las Tunas, Cuba

La calidad del suelo es una herramienta de evaluación que puede facilitar la adaptación de prácticas de manejo que promuevan sistemas agropecuarios sostenibles. La investigación de este trabajo se inició con un diagnóstico participativo en 12 comunidades rurales de la provincia de Las Tunas en el año 2009 en el cual los productores identificaron los puntos críticos de calidad de los suelos de la región y sirvieron de punta de partida para seleccionar las variables físicas, químicas y biológicas a determinar en cinco sistemas de uso agropecuario (arboleda, pasto natural, pasto cultivado y dos sistemas silvopastoriles) en la zona La Veguita, municipio Las Tunas. El sistema arboleda se utilizó como referencia de las propiedades naturales del suelo. El pasto natural se distingue por el desarrollo de especies de baja productividad, sin embargo el pasto cultivado está representado por Pennisetum purpureum vc CUBA CT-115, y constituye una contribución a la tecnología de bancos de biomasa, para utilizarse en el pastoreo durante la seca. Los sistemas silvopastoriles están representados por Leucaena leucocephala Lam. en franjas y Panicum maximun vc. Likoni, los que se diferencian en su diseño, manejo y propiedades mineralógicas. El objetivo fundamental fue valorar indicadores de calidad de los suelos Luvisoles háplicos sobre granitoides, para diseñar e implementar tecnologías de manejo que permitan incrementar la capacidad agroproductiva de los suelos. Mediante el análisis de componentes principales se obtuvo un conjunto mínimo de indicadores físicos, químicos y biológicos que proporcionaron información útil referente a los procesos edáficos y se integraron para determinar un índice de calidad. En el sistema de uso, caracterizado por el pasto cultivado (Pennisetum purpureum) se estableció, en parcelas experimentales, un ensayo de corta duración, en el que se comparó el laboreo tradicional y el laboreo sin inversión del prisma, con y sin aplicación de compost. En ambos sistemas de labranza se evaluó el desarrollo del cultivo e indicadores de calidad del suelo. Los resultados mostraron que del conjunto de indicadores edáficos estudiados se seleccionaron 6 en los que la capacidad de intercambio catiónico, materia orgánica, potasio intercambiable, contenido de arena, densidad aparente y biomasa de lombrices explicaron la mayor variabilidad y sirvieron de base para evaluar la calidad de estos suelos. Se establecieron valores umbrales de referencia de indicadores de calidad, que permitirán evaluar y monitorear los sistemas de uso y manejo de la región. El sistema Silvopastoril 2 resultó el de mayor índice de calidad de los suelos tomando como referencia la arboleda por su condición natural. El manejo silvopastoril influyó predominantemente en mejores resultados productivos pero las características edáficas principalmente físicas, deben definir su diseño y manejo. El sistema de pastos cultivados con Pennisetum purpureum vc CUBA CT 115, alcanzó la mayor acumulación de carbono orgánico, sin embargo, el manejo limitó su calidad física y el funcionamiento productivo del sistema. De manera general los sistemas de uso no garantizan un índice de la calidad del suelo, puesto que se ve afectado por las propiedades edáficas y las prácticas de manejo. En el ámbito biológico, las lombrices constituyeron los organismos más numerosos con predominio en los sistemas silvopastoriles y arboleda. Los valores superiores de densidad y biomasa de oligoquetos y mayor diversidad de otros individuos de la macrofauna, indican que la presencia de árboles en los pastizales de gramínea potencia y diversifican las comunidades de macroinvertebrados del suelo. El sistema de labranza sin inversión del prisma propicia una mejor calidad física del suelo, manteniendo el carbono e incrementando los rendimientos del Penisetum purpureum cv CUBA CT 115. La labranza tradicional, a base de aradura y grada, afecta a los contenidos de materia orgánica en el corto plazo y mantiene capas compactas en el horizonte subyacente, además influye desfavorablemente al flujo del aire, agua y al desarrollo radical de los pastos. La aplicación de compost favoreció mejores resultados productivos en ambas tecnologías de manejo. Los resultados alcanzados recomiendan la implantación de tecnologías de manejo conservacionistas y la aplicación de materiales orgánicos que restituyan los elementos nutricionales requeridos por los pastos, por lo que no se justifica la continuidad del uso de prácticas tradicionales de laboreo con inversión del prisma que se realizan actualmente. ABSTRACT The soil quality is an assessment tool, which could facilitate the adaptation of management practices that promote sustainable agricultural systems. The present investigation was carried out with a participatory diagnostic in twelve rural communities from Las Tunas province in 2009, in which producers identified the critical soil quality points of region and served as a starting point to select the physical, chemical and biological variables, in order to determine on five agricultural used systems (grove, natural grass, cultivated grass and two silvopastoral systems) in La Veguita zone from municipality Las Tunas. The system grove was used as reference of natural soil properties. The natural grass is distinguished by the development of low-productivity species, however the cultivated grass is represented by Pennisetum purpureum vc CUBA CT-115, and is a contribution to the biomass banks technology, in order to use in grazing during the dry season. The silvopastoral systems are represented by Leucaena leucocephala Lam. in stripes and Panicum maximum cv. Likoni, which differ in their design, handling and mineralogical properties. The main aim of this study was to assess the quality indicators for haplic Luvisols on granitoids for designing and implementing management technologies in order to increase the agroproductive capacity of soils. A minimal set of physical, chemical and biological indicators by Principal Component Analysis was obtained, which provided some useful information regarding soil processes and their integration for determining an index of quality. In the use system, characterized for the cultivated grass (Pennisetum purpureum) a short term assay in experimental plots was established, where the traditional and prism without inversion tillage were compared with and without compost application. In both tillage systems were evaluated the crop development and soil quality indicators. The results showed that the studied soil indicators set, six were selected, specifically the ones with exchangeable cationic capacity, organic matter, interchangeable potassium, sand content, bulk density and earthworm biomass, which explained the higher variability and served as the basis for evaluating the soil quality. The Reference threshold values of quality indicators for evaluating and monitoring the use and management systems from the region were established. The silvopastoral system 2 had the highest quality soil index, taking of reference the grove system for its natural condition. The silvopastoral management influenced on better productive results, but the soil characteristics, particularly the physical properties to be defined its design and management. However, the cultivated grass system with Pennisetum purpureum vc CUBA CT 115, reached the greatest accumulation of organic carbon. However, the management limited its physical quality and productive performance of the system. In addition, the use systems do not guarantee an index of soil quality, since it is affected by soil properties and management practices. From the biological aspect, the earthworms are the most numerous organisms on the silvopastoral systems and grove. The higher values of oligochaetes biomass and density and the greater diversity of other organisms from macrofauna indicate that the tree presence on the pasture grasses allows enhancing and diversifying soil macro invertebrate communities. The non-inversion prism tillage system provides a better physical quality of soil, maintaining the carbon content and increasing the yields of Penisetum purpureum vc CUBA CT 115. The traditional tillage, using the plowing and harrowing affects the organic matter content in a short term and keeps on compact layers of underlying horizon, and adversely affects the air and water flow, and pasture radical development. The compost application favored the best production results in both management technologies. The results obtained recommend the implementation of conservation management technologies and the application of organic materials that restore the nutritional elements required by the pasture, so it does not justify the continued use of traditional tillage practices with prism investment that are currently being made.

The potential of organic fertilizers and water management to reduce N2O emissions in Mediterranean climate cropping systems. A review.

Environmental problems related to the use of synthetic fertilizers and to organic waste management have led to increased interest in the use of organic materials as an alternative source of nutrients for crops, but this is also associated with N2O emissions. There has been an increasing amount of research into the effects of using different types of fertilization on N2O emissions under Mediterranean climatic conditions, but the findings have sometimes been rather contradictory. Available information also suggests that water management could exert a high influence on N2O emissions. In this context, we have reviewed the current scientific knowledge, including an analysis of the effect of fertilizer type and water management on direct N2O emissions. A meta-analysis of compliant reviewed experiments revealed significantly lower N2O emissions for organic as opposed to synthetic fertilizers (23% reduction). When organic materials were segregated in solid and liquid, only solid organic fertilizer emissions were significantly lower than those of synthetic fertilizers (28% reduction in cumulative emissions). The EF is similar to the IPCC factor in conventionally irrigated systems (0.98% N2O-N N applied−1), but one order of magnitude lower in rainfed systems (0.08%). Drip irrigation produces intermediate emission levels (0.66%). Differences are driven by Mediterranean agro-climatic characteristics, which include low soil organic matter (SOM) content and a distinctive rainfall and temperature pattern. Interactions between environmental and management factors and the microbial processes involved in N2O emissions are discussed in detail. Indirect emissions have not been fully accounted for, but when organic fertilizers are applied at similar N rates to synthetic fertilizers, they generally make smaller contributions to the leached NO3− pool. The most promising practices for reducing N2O through organic fertilization include: (i) minimizing water applications; (ii) minimizing bare soil; (iii) improving waste management; and (iv) tightening N cycling through N immobilization. The mitigation potential may be limited by: (i) residual effect; (ii) the long-term effects of fertilizers on SOM; (iii) lower yield-scaled performance; and (iv) total N availability from organic sources. Knowledge gaps identified in the review included: (i) insufficient sampling periods; (ii) high background emissions; (iii) the need to provide N2O EF and yield-scaled EF; (iv) the need for more research on specific cropping systems; and (v) the need for full GHG balances. In conclusion, the available information suggests a potential of organic fertilizers and water-saving practices to mitigate N2O emissions under Mediterranean climatic conditions, although further research is needed before it can be regarded as fully proven, understood and developed.