Efeitos da laserterapia na atividade biológica de células de carcinoma epidermóide de língua humano

The low level laser therapy (LLLT) has shown to be effective in promoting the proliferation of different cells in vitro, including keratinocytes, osteoblasts, endothelial cells and stem cells. It has been speculated that the biostimulatory effect of LLLT could cause undesirable enhancement of tumor growth in neoplastic diseases, since the malignant cells are more susceptible to proliferative stimuli. Within this context, this study evaluated the effect of LLLT on epidermoid carcinoma of the tongue cell line (SCC25) proliferation and invasion. Cultured cells were irradiated with an InGaAIP diode laser, 660nm, 30mW using two energy densities (0.5J/cm2 and 1.0J/cm2). Proliferative activity was assessed through trypan blue staining method and through cell cycle analysis using flow cytometry. The invasive potential was measured through cell invasion assay using matrigel. Cyclin D1, E-cadherin, -catenin and MMP-9 expressions were analyzed by immunofluorescence and flow cytometry and related to the investigated biological activities. Proliferation curve demonstrated that SCC25 irradiated with 1.0J/cm2 had the highest proliferative rate when compared to the control group and the group irradiated with 0.5J/cm2 (p<0.05). LLLT affected cell cycle distribution and energy density of 1.0 J/cm2 promoted a higher percentage of cells in S/G2/M phases, with statistically significant differences at 24h interval (p<0.05). LLLT, mainly with 1.0J/cm2, revealed significantly higher potential for invasion and influenced the expression of cyclin D1, E-cadherin, -catenin and MMP-9, promoting the malignant phenotype. In conclusion, our results indicate that LLLT has an important stimulatory effect on proliferation and invasion of SCC25 cells, likely due to altered expression of proteins associated with these processes

Electrophoretic and chromatographic profile for S-like hemoglobin

Hemoglobin variants originate mainly by simple amino acid substitutions, the result of nucleotide sequence changes. Recently, the number of known abnormal hemoglobins has increased due to improvement in analysis methodologies; however, many laboratories are not prepared to correctly identify mutants. Hb S is a very well-characterized hemoglobin variant that varies in prevalence in different regions of Brazil. However, there is a type of Hb that presents electrophoretic migration in alkaline pH similar to Hb S, named S-like Hb, which can be incorrectly diagnosed; therefore, its frequency is underestimated. We obtained reference ranges for Hb S by HPLC, and we examined the electrophoretic and chromatographic profiles of S-like Hb. Hb Hasharon, Hb D-Los Angeles, Hb Korle-Bu, Hb Lepore, Hb D-Iran, Hb G-like, Hb Queens, Hb Montgomery, and Hb Q-India were found. Cases of association between two beta chain mutants were also found. Electrophoresis in alkaline and acid pH was utilized to initially screen these Hb variants, and globin chain electrophoresis at both high and low pH was performed to identify the globin chain mutant. Chromatographic analysis permitted the identification of the hemoglobin variant and also facilitated the quantification of these variants. Therefore, an association of classical laboratory diagnostic methodologies is fundamental for the correct identification of suspect Hb variants. The S and S-like hemoglobin profiles determined in this study will help in the diagnosis of these variants in health care services.

Environmental evaluation of cogeneration scenarios in sugar industry

The development of new techniques that allow the analysis and optimization of energy systems bearing in mind environmental issues is indispensable in a world with finite natural resources and growing demand of energy. Among the energy systems that deserve special attention, cogeneration in the sugar industry must be pointed out, because it uses efficiently a common fuel for generation of useful heat and power. Within this frame, thermoeconomical optimization - 2nd Law of Thermodynamics analysis by exergy function and economic evaluation of the thermal system - gradually is taking importance as a powerful tool to assist to the decision making process. Also, the explicit consideration of environmental issues offers a better way to explore trade-offs between different aspects to support the decisions that must be made. In this work it is used the technique of Life Cycle Analysis (LCA) which allows to consider environmental matters as an integral part of the problem, in opposite to most of the environmental approaches that only reduce residuals generation , without taking into account impacts associated to other related processes. On the other hand, the consideration of environmental issues in optimization of energy systems is a novel and promissory contribution in the state of the art of energy optimization and LCA. The system under study is a sugar plant of Tucumán (Argentina) given the particular importance that this industry had inside the regional economy of the Argentinean Northwest. Although cogeneration comes being used a while ago in sugar industry, being the main objective the generation of heat and as secondary objective the electric power generation and mechanic power to cover several needs of working machineries, to the date it is no available a versatile tool that allows to analyze economical feasible alternatives bearing in mind environmental issues. At sugar plants, steam is generated in boilers using as fuel bagasse - cellulosic fiber waste obtained crushing the sugar cane- and it is used to give useful heat and shaft work to the plant, but it can also be used to generate electricity with export opportunities to the electrical network. The great number of process alternatives outlines a serious decision making problem in order to take advantage of the resources. Although the problem turns out to be a mixed non-linear problem (MINLP), the main contribution of this work is the development of a hybrid strategy to evaluate cogeneration alternatives that combines optimization approaches with environmental indicators. This powerful tool for its versatility and robustness to analyze cogeneration systems, will be of great help in the decision making process, because of their easy implementation to analyze the kind of problems presented in the sugar industry.

Estudo de viabilidade de implantação, operação e monitoramento de aterros sanitários: uma abordagem econômica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Subsídios para avaliação do ciclo de vida de modo simplificada da produção agrícola de milho por meio de um estudo de caso

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise da viabilidade e ciclo celular de fibroblastos equinos cultivados in vitro: comparação pré e pós-descongelação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Um modelo de avaliação de fluxos de biomassa e carbono em madeireiras de comunidades isoladas da região amazônica

A Amazônia tem imensos recursos florestais, abrigando um terço das florestas tropicais do mundo. A Amazônia brasileira compreende uma área maior que 5 milhões de km², o que corresponde a 61 % do território brasileiro. A região norte produz 72,45% da madeira em tora do Brasil, o estado do Pará contribui com 55,47% de acordo com IBMA (2007). A exploração madeireira na Amazônia é caracterizada como “garimpagem florestal”, ou seja, os exploradores entram na floresta selecionam as toras de valor comercial e a retiram. Passando-se certo tempo, eles voltam novamente a essa área e a exploram, esse processo de exploração está acontecendo em um intervalo de tempo cada vez menor. A Amazônia legal abrigava 833 serrarias circulares em 1998. Essas serrarias estavam localizadas principalmente no estuário amazônico (71%) – nos furos e tributários dos rios Amazonas, Xingu, Tocantins e Pará. Essas processadoras familiares consumiram conjuntamente 1,3 milhões de metros cúbicos de madeira em tora (5% da produção da Amazônia). Neste trabalho estimou-se o balanço de carbono em serrarias do estuário do rio Amazonas e foi desenvolvido o ciclo de vida do carbono para uma serraria no estuarino amazônico. Foi identificado que no processo produtivo da comunidade há um caminho bem definido do recurso natural (biomassa/madeira): exploração florestal, transporte de biomassa, transformação (empresas madeireiras) / processos produtivos, geração e utilização de resíduos, transporte de madeira processada, comercialização/mercado. O objetivo deste trabalho foi avaliar os recursos energéticos através do fluxo (inputs e outputs) da madeira e da energia no processo. Para isso, desenvolveu um modelo que simulou os fluxos de carbono, da madeira e a área afetada pela exploração. Neste trabalho criou-se um modelo específico onde se avaliou o fluxo de carbono para o cenário estudado; a avaliação do impacto ambiental foi alcançada, onde obteve um valor positivo, uma captura de carbono cerca de 55 tCO₂/mês, mesmo com a baixa eficiência do sistema produtivo, em torno de 36% conclui-se que o sistema atual de exploração não polui mas poderia ser melhorado a fim de alcançar uma maior eficiência do processo produtivo. Enquanto ao resíduo gerado aproximadamente 64% do volume de madeira que entra na serraria conseguira gerar aproximadamente 1240 kW de energia elétrica mensal.

Aplicabilidade da metodologia ecodesign à produção de calçados femininos

Pós-graduação em Design - FAAC

Genistein at Maximal Physiologic Serum Levels Induces G0/G1 Arrest in MCF-7 and HB4a Cells, But Not Apoptosis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Simulação da produtividade de cana-de-açúcar (Saccharum officinarum L.) na região nordeste do Brasil, utilizando o modelo DSSAT

The objective of this study was to simulate the potential stem and sugar yield of sugar cane (Saccharum officinarum L.) in the Northeastern Brazil (Petrolina-PE and Teresina-PI) and analyze 4 varieties in different planting seasons in two environments: irrigated and rainfed cultivars. The model of simulation was DSSAT/CANEGRO (Decision Support System for Agrotechnology Transfer) and the four sugar cane varieties were as follows: RB86 7515, CTC 4, CTC 7 and CTC 20 (all in 1.5 year cycle). Analysis of variance was performed on the results and means were compared using the Tukey test with probability level at 5%. March is the recommended month for planting in Teresina, PI. In Petrolina, PE, rainfed planting is not advisable because of the extended water deficit all year long. In an irrigated environment, no difference was found concerning stem yield as a function of planting season, for all varieties in the study regions. The stem and sugar yields were always higher in irrigated environment as compared with those in rainfed environment in all municipalities and study varieties. The simulation model provided good estimate of stem and sugar yields as compared with experimental data in Teresina, PI.

Anticancer Effects of Synthetic Phosphoethanolamine on Ehrlich Ascites Tumor: An Experimental Study

Background: Antineoplastic phospholipids (ALPs) represent a promising class of drugs with a novel mode of action undergoes rapid turnover in the cell membrane of tumors, interfering with lipid signal transduction, inducing cell death. The aim of this study was to investigate the synthetic phosphoethanolamine (Pho-s) as a new anticancer agent. Materials and Methods: Cell viability and morphology were assessed by (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), Hoechst and rhodamine staining. Apoptosis was assessed by Annexin V and propidium iodide (PI) staining, caspase-3 activity, mitochondrial membrane potential (Delta m psi) and cell cycle analysis, combined with evaluation of tumor growth in Ehrlich Ascites Tumor (EAT) bearing mice. Results: We found that Pho-s 2.30 mg/ml induced cytotoxicity in all tumor cell lines studied without affecting normal cells. In vitro studies with EAT cells indicated that Pho-s induced apoptosis, demonstrated by an increase in Annexin-V positive cells, loss of mitochondrial potential (Delta m psi) and increased caspase-3 activity. It was also shown to increase the sub-G(1) apoptotic fraction and inhibit progression to the S phase of the cell cycle. Additionally, antitumor effects on the EAT-bearing mice showed that Pho-s, at a concentration of 35 and 70 mg/kg, inhibited tumor growth and increased the lifespan of animals without causing liver toxicity. Conclusion: These findings suggest that Pho-s is a potential anticancer candidate drug.

Design of alternative energy storage systems for hybrid vehicles based on statistical processing of driving cycles information

Hybrid vehicles represent the future for automakers, since they allow to improve the fuel economy and to reduce the pollutant emissions. A key component of the hybrid powertrain is the Energy Storage System, that determines the ability of the vehicle to store and reuse energy. Though electrified Energy Storage Systems (ESS), based on batteries and ultracapacitors, are a proven technology, Alternative Energy Storage Systems (AESS), based on mechanical, hydraulic and pneumatic devices, are gaining interest because they give the possibility of realizing low-cost mild-hybrid vehicles. Currently, most literature of design methodologies focuses on electric ESS, which are not suitable for AESS design. In this contest, The Ohio State University has developed an Alternative Energy Storage System design methodology. This work focuses on the development of driving cycle analysis methodology that is a key component of Alternative Energy Storage System design procedure. The proposed methodology is based on a statistical approach to analyzing driving schedules that represent the vehicle typical use. Driving data are broken up into power events sequence, namely traction and braking events, and for each of them, energy-related and dynamic metrics are calculated. By means of a clustering process and statistical synthesis methods, statistically-relevant metrics are determined. These metrics define cycle representative braking events. By using these events as inputs for the Alternative Energy Storage System design methodology, different system designs are obtained. Each of them is characterized by attributes, namely system volume and weight. In the last part the work, the designs are evaluated in simulation by introducing and calculating a metric related to the energy conversion efficiency. Finally, the designs are compared accounting for attributes and efficiency values. In order to automate the driving data extraction and synthesis process, a specific script Matlab based has been developed. Results show that the driving cycle analysis methodology, based on the statistical approach, allows to extract and synthesize cycle representative data. The designs based on cycle statistically-relevant metrics are properly sized and have satisfying efficiency values with respect to the expectations. An exception is the design based on the cycle worst-case scenario, corresponding to same approach adopted by the conventional electric ESS design methodologies. In this case, a heavy system with poor efficiency is produced. The proposed new methodology seems to be a valid and consistent support for Alternative Energy Storage System design.

Applicazione delle metodologie LCA ed LCC per la valutazione ambientale ed economica della produzione del pellet realizzato tramite scarti agricoli di potature degli uliveti

Nel seguente lavoro è stata sviluppata una analisi ambientale ed economica del ciclo di vita del pellet, realizzato con scarti agricoli dalle potature degli uliveti. L’obiettivo di tale lavoro è dimostrare se effettivamente l’utilizzo del pellet apporti vantaggi sia dal punto di vista ambientale sia da quello economico. In tale progetto si sviluppano quindi un LCA, Life cycle analysis, e un LCC, Life Cycle Cost, secondo gli steps standard suggeriti da tali metodologie. Per effettuare l’analisi del ciclo di vita è stato utilizzato il software Simapro che ha permesso di valutare gli impatti ambientali sulle varie categorie di impatto incluse. In particolare sono stati considerati due metodologie, una midpoint ed una endpoint, ossia l’Ecoindicator 99 e il CML2 baseline 2000. Per le valutazioni finali è stata poi utilizzata la normativa spagnola sugli impatti ambientali, BOE 21/2013 del 9 dicembre, che ci ha permesso di caraterizzare le varie categorie d’impatto facendo emergere quelle più impattate e quelle meno impattate. I risultati finali hanno mostrato che la maggior parte degli impatti sono di tipo compatibile e moderato; pochi, invece, sono gli impatti severi e compatibili, che si riscontrano soprattutto nella categoria d’impatto “Fossil Fuels”. Per quanto riguarda invece l’analisi economica, si è proceduto effettuando una valutazione iniziale fatta su tutto il processo produttivo considerato, poi una valutazione dal punto di vista del produttore attraverso una valutazione dell’investimento ed infine, una valutazione dal punto di vista del cliente finale. Da queste valutazioni è emerso che ciò risulta conveniente dal punto di vista economico non solo per il produttore ma anche per l’utente finale. Per il primo perché dopo i primi due anni di esercizio recupera l’investimento iniziale iniziando ad avere un guadagno; e per il secondo, poiché il prezzo del pellet è inferiore a quello del metano. Quindi, in conclusione, salvo cambiamenti in ambito normativo ed economico, l’utilizzo del pellet realizzato da scarti di potature di uliveti risulta essere una buona soluzione per realizzare energia termica sia dal punto di vista ambientale, essendo il pellet una biomassa il cui ciclo produttivo non impatta severamente sull’ambiente; sia dal punto di vista economico permettendo al produttore introiti nell’arco del breve tempo e favorendo al cliente finale un risparmio di denaro sulla bolletta.

Chalcone JAI-51 improves efficacy of synchrotron microbeam radiation therapy of brain tumors

Microbeam radiation therapy (MRT), a preclinical form of radiosurgery, uses spatially fractionated micrometre-wide synchrotron-generated X-ray beams. As MRT alone is predominantly palliative for animal tumors, the effects of the combination of MRT and a newly synthesized chemotherapeutic agent JAI-51 on 9L gliosarcomas have been evaluated. Fourteen days (D14) after implantation (D0), intracerebral 9LGS-bearing rats received either MRT, JAI-51 or both treatments. JAI-51, alone or immediately after MRT, was administered three times per week. Animals were kept up to ∼20 weeks after irradiation or sacrificed at D16 or D28 after treatment for cell cycle analysis. MRT plus JAI-51 increased significantly the lifespan compared with MRT alone (p = 0.0367). JAI-51 treatment alone had no effect on rat survival. MRT alone or associated with JAI-51 induced a cell cycle blockade in G2/M (p < 0.01) while the combined treatment also reduced the proportion of G0/G1 cells. At D28 after irradiation, MRT and MRT/JAI-51 had a smaller cell blockade effect in the G2/M phase owing to a significant increase in tumor cell death rate (<2c) and a proportional increase of endoreplicative cells (>8c). The combination of MRT and JAI-51 increases the survival of 9LGS-bearing rats by inducing endoreduplication of DNA and tumor cell death; further, it slowed the onset of tumor growth resumption two weeks after treatment.

Targeting sphingosine kinase 1 in carcinoma cells decreases proliferation and survival by compromising PKC activity and cytokinesis

Sphingosine kinases (SK) catalyze the phosphorylation of proapoptotic sphingosine to the prosurvival factor sphingosine 1-phosphate (S1P), thereby promoting oncogenic processes. Breast (MDA-MB-231), lung (NCI-H358), and colon (HCT 116) carcinoma cells were transduced with shRNA to downregulate SK-1 expression or treated with a pharmacologic SK-1 inhibitor. The effects of SK-1 targeting were investigated by measuring the level of intracellular sphingosine, the activity of protein kinase C (PKC) and cell cycle regulators, and the mitotic index. Functional assays included measurement of cell proliferation, colony formation, apoptosis, and cell cycle analysis. Downregulation of SK-1 or its pharmacologic inhibition increased intracellular sphingosine and decreased PKC activity as shown by reduced phosphorylation of PKC substrates. In MDA-MB-231 cells this effect was most pronounced and reduced cell proliferation and colony formation, which could be mimicked using exogenous sphingosine or the PKC inhibitor RO 31-8220. SK-1 downregulation in MDA-MB-231 cells increased the number of cells with 4N and 8N DNA content, and similar effects were observed upon treatment with sphingosine or inhibitors of SK-1 or PKC. Examination of cell cycle regulators unveiled decreased cdc2 activity and expression of Chk1, which may compromise spindle checkpoint function and cytokinesis. Indeed, SK-1 kd cells entered mitosis but failed to divide, and in the presence of taxol also failed to sustain mitotic arrest, resulting in further increased endoreduplication and apoptosis. Our findings delineate an intriguing link between SK-1, PKC and components of the cell cycle machinery, which underlines the significance of SK-1 as a target for cancer therapy.