Combinations of parabens at concentrations measured in human breast tissue can increase proliferation of MCF-7 human breast cancer cells

The alkyl esters of p-hydroxybenzoic acid (parabens), which are used as preservatives in consumer products, possess oestrogenic activity and have been measured in human breast tissue. This has raised concerns for a potential involvement in the development of human breast cancer. In this paper, we have investigated the extent to which proliferation of MCF-7 human breast cancer cells can be increased by exposure to the five parabens either alone or in combination at concentrations as recently measured in 160 human breast tissue samples. Determination of no-observed-effect concentrations (NOEC), lowest-observed-effect concentrations (LOEC), EC50 and EC100 values for stimulation of proliferation of MCF-7 cells by five parabens revealed that 43/160 (27%) of the human breast tissue samples contained at least one paraben at a concentration ≥ LOEC and 64/160 (40%) > NOEC. Proliferation of MCF-7 cells could be increased by combining all five parabens at concentrations down to the 50th percentile (median) values measured in the tissues. For the 22 tissue samples taken at the site of ER + PR + primary cancers, 12 contained a sufficient concentration of one or more paraben to stimulate proliferation of MCF-7 cells. This demonstrates that parabens, either alone or in combination, are present in human breast tissue at concentrations sufficient to stimulate the proliferation of MCF-7 cells in vitro, and that functional consequences of the presence of paraben in human breast tissue should be assessed on the basis of all five parabens and not single parabens individually.

Exploring combinations of different color and facial expression stimuli for gaze-independent BCIs

Background: Some studies have proven that a conventional visual brain computer interface (BCI) based on overt attention cannot be used effectively when eye movement control is not possible. To solve this problem, a novel visual-based BCI system based on covert attention and feature attention has been proposed and was called the gaze-independent BCI. Color and shape difference between stimuli and backgrounds have generally been used in examples of gaze-independent BCIs. Recently, a new paradigm based on facial expression changes has been presented, and obtained high performance. However, some facial expressions were so similar that users couldn't tell them apart, especially when they were presented at the same position in a rapid serial visual presentation (RSVP) paradigm. Consequently, the performance of the BCI is reduced. New Method: In this paper, we combined facial expressions and colors to optimize the stimuli presentation in the gaze-independent BCI. This optimized paradigm was called the colored dummy face pattern. It is suggested that different colors and facial expressions could help users to locate the target and evoke larger event-related potentials (ERPs). In order to evaluate the performance of this new paradigm, two other paradigms were presented, called the gray dummy face pattern and the colored ball pattern. Comparison with Existing Method(s): The key point that determined the value of the colored dummy faces stimuli in BCI systems was whether the dummy face stimuli could obtain higher performance than gray faces or colored balls stimuli. Ten healthy participants (seven male, aged 21–26 years, mean 24.5 ± 1.25) participated in our experiment. Online and offline results of four different paradigms were obtained and comparatively analyzed. Results: The results showed that the colored dummy face pattern could evoke higher P300 and N400 ERP amplitudes, compared with the gray dummy face pattern and the colored ball pattern. Online results showed that the colored dummy face pattern had a significant advantage in terms of classification accuracy (p < 0.05) and information transfer rate (p < 0.05) compared to the other two patterns. Conclusions: The stimuli used in the colored dummy face paradigm combined color and facial expressions. This had a significant advantage in terms of the evoked P300 and N400 amplitudes and resulted in high classification accuracies and information transfer rates. It was compared with colored ball and gray dummy face stimuli.

A Road Following Approach Using Artificial Neural Networks Combinations

Navigation is a broad topic that has been receiving considerable attention from the mobile robotic community over the years. In order to execute autonomous driving in outdoor urban environments it is necessary to identify parts of the terrain that can be traversed and parts that should be avoided. This paper describes an analyses of terrain identification based on different visual information using a MLP artificial neural network and combining responses of many classifiers. Experimental tests using a vehicle and a video camera have been conducted in real scenarios to evaluate the proposed approach.

Evaluation of galling resistance for some selected combinations of tool steels/stainless steel sheet materials/lubricants using pin-on-disc testing

Stainless steels are well known to be prone to cold welding and material transfer in sliding contacts and therefore difficult to cold form unless certain precautions as discussed in this paper are taken. In the present study different combinations of tool steels/stainless steels/lubricants has been evaluated with respect to their galling resistance using pin-on-disc testing. The results show that a high galling resistance is favored by a high stainless steel sheet hardness and a blasted stainless steel sheet surface topography. The effect of type of lubricant was found to be more complex. For example, the chlorinated lubricants failed to prevent metal-to-metal contact on a brushed sheet surface but succeeded on a blasted sheet surface of the same stainless steel material. This is believed to be due to a protective tribofilm which is able to form on the blasted surface, but not on the brushed surface.

Preparers’ and non-preparers’ lobbying on the proposed prohibition of goodwill amortisation in ED3 ‘business combinations���

In this paper preparers’ and non-preparers’ positions regarding accounting for goodwill are examined through studying submitted comment letters on ED3 ‘Business Combinations���. Preparers have, because of economic consequences, incentives to lobby for the non-amortisation approach and non-preparers for the amortisation approach. As hypothesised, non-preparers are found to support amortisation of goodwill to a greater extent than do preparers. Moreover, the two groups’ supportive arguments, i.e. how they argue for or against the non-amortisation or amortisation approach, are studied. Again, as hypothesised, the results show that the two groups use the same type of ‘sophisticated’ framework based arguments instead of economic consequences arguments. Taken together the examination of the comment letters thus indicates that both preparers and non-preparers point at conceptual strengths and weaknesses, instead of pointing at the real cause of the lobbying activities, i.e. perceived economic consequences, when they try to affect the final outcome of the standard. These findings confirm earlier research which has suggested that self-interested lobbyists use accounting theories and concepts as useful justifications.

Culture-based fisheries in small reservoirs in northern Vietnam: effect of stocking densities and species combinations

This study was conducted in 20 reservoirs, ranging in size from 4 to 30 ha, in the mountainous, northern region of Vietnam, in ThaiNguyen and YenBai provinces, over two growth cycles in 2002/03 and 2003/04. The reservoirs are leased by farmers for fishery activities from the provincial administration, and the trials were managed by the lessee farmers. Three species combinations in ratios (by fingerling weight) of grass carp: silver carp: bighead carp: common carp: mrigal 1:2:1:1:3 (A), 1:3:1:1:2 (B) and 1:2:1:1:2 (C) were used as seed stock. The overall mean yield of stocked fish in 2002/03 and 2003/04 growth cycles in reservoirs in ThaiNguyen and YenBai provinces was 165 (±21) and 190 (39), and 287 (±22) and 325 (±24) kg ha⁻¹ respectively. The yield in reservoirs in both provinces, in both growth cycles and irrespective of the species combinations, increased in relation to stocking density. In reservoirs in ThaiNguyen Province, the species combination B gave the lowest yield (both growth cycles and overall), and differed significantly (P<0.05) from combinations A and C. The stocking efficiency (ratio of the yield of stocked fish in kg ha⁻¹ to the weight of the stocked fish in kg ha⁻¹) in reservoirs in ThaiNguyen Province ranged from 2.9 to 5.1 over the two growth cycles and that in YenBai from 2.8 to 3.9. There was no discernible trend between growth cycles and/or between species combinations. The major cost incurred was for fingerling procurement. In all instances, a net profit was accrued. The mean (±standard error (SE)) net profit ha⁻¹ (in 103VN dong; approximately 15 500 VND=1 US$) was 885 (±270) and 864 (±214), and 1322 (±176) and 1600 (±150) for the growth cycles 2002/03 and 2003/04 for reservoirs in ThaiNguyen and YenBai provinces respectively. Between the two growth cycles, the net profit increased in eight and three reservoirs from YenBai and ThaiNguyen, respectively, the maximum increase being recorded in Khuan Gio (165%) and Dong Man (39%) reservoirs.

Finding coverage using incremental attribute combinations

Coverage is the range that covers only positive samples in attribute (or feature) space. Finding coverage is the kernel problem in induction algorithms because of the fact that coverage can be used as rules to describe positive samples. To reflect the characteristic of training samples, it is desirable that the large coverage that cover more positive samples. However, it is difficult to find large coverage, because the attribute space is usually very high dimensionality. Many heuristic methods such as ID3, AQ and CN2 have been proposed to find large coverage. A robust algorithm also has been proposed to find the largest coverage, but the complexities of time and space are costly when the dimensionality becomes high. To overcome this drawback, this paper proposes an algorithm that adopts incremental feature combinations to effectively find the largest coverage. In this algorithm, the irrelevant coverage can be pruned away at early stages because potentially large coverage can be found earlier. Experiments show that the space and time needed to find the largest coverage has been significantly reduced.

Antifungal synergy of theaflavin and epicatechin combinations against Candida albicans

New antifungal agents are required to compensate for the increase in resistance to standard antifungal agents of Candida albicans, which is an important opportunistic fungal pathogen that causes minor infections in many individuals but very serious infections in those who are immune-compromised. In this study, combinations of theaflavin and epicatechin are investigated as potential antifungal agents and also to establish whether antifungal synergy exists between these two readily accessible and cost-effective polyphenols isolated from black and green tea. The results of disc diffusion assays showed stronger antibacterial activity of theaflavin:epicatechin combinations against C. albicans NCTC 3255 and NCTC 3179, than that of theaflavin alone. Minimum inhibitory concentrations (MICs) of 1,024 μg/ml with theaflavin and 128-256 μg/ml with theaflavin:epicatechin combinations were found. The fractional inhibitory concentration indexes were calculated, and the synergy between theaflavin and epicatechin against both isolates of C. albicans was confirmed. Theaflavin:epicatechin combinations show real potential for future use as a treatment for infections caused by C. albicans.

Minimum inhibitory and bacterial concentrations of theaflavin and synergistic combinations with epicatechin and quercetin against clinical isolates of Stenotrophomonas Maltophilia

Stenotrophomonas maltophilia is an important nosocomial pathogen with intrinsic resistance to multiple antibiotics. Previous investigations have shown flavanols from black tea to possess antibacterial activity. This study describes the determination of minimum inhibitory concentrations and minimum bactericidal concentration for theaflavin independently and in formulations with the polyphenols epicatechin and quercetin against nine clinical isolates of Stenotrophomonas maltophilia and the control isolate NCTC 130141 via the microtitre assay. The results demonstrate that theaflavin has strong antibacterial activity and also shows significant synergism with epicatechin and quercetin. The minimum inhibitory concentrations of the isolates range between 200-400 g/mL for theaflavin and 100-200 g/mL for both theaflavin:epicatechin and theaflavin:quercetin combinations. The minimum bactericidal concentrations were discovered to be a 2 fold increase on those of the minimum inhibitory concentrations. The research highlights the potential use of polyphenols for the clinical treatment of highly antibiotic resistant bacteria.

Structure-property relationships in nylon 6 nanocomposites based on octaphenyl-, dodecaphenyl-POSS, montmorillonite, and their combinations

Binary and ternary nanocomposites were produced by incorporating, via melt compounding, two types of octa-and dodecaphenyl substituted polyhedral oligomeric silsesquioxanes (POSS), montmorillonite (MMT), and combinations of POSS with MMT into nylon 6. The tensile, flexural, and dynamic thermo-mechanical properties of these materials were characterized and their structure-property relationships discussed. The results show that the losses in ductility and toughness experienced after inclusion of MMT into nylon 6 can be balanced out by co-mixing MMT with the dodecaphenyl- POSS to produce a ternary nanocomposite. This trend however was less pronounced in the ternary MMT/octaphenyl-POSS system. Analysis of the microstructure organization in these materials using XRD and SEM sheds some light on understanding the differences in behavior. Both types of POSS particles mixed alone in nylon 6 were found to be polydisperse (500 nm to a few microns in size) and locally aggregated, yielding materials with similar mechanical performance. The co-mixing of MMT with the octaphenyl- POSS served to break down the POSS crystal aggregates, enhancing their micro-mechanical reinforcing action. On the other hand, the POSS crystals were not affected in the MMT/dodecaphenyl-POSS system, which led to improving their toughening ability.

Estimating the proportion of metabolic health outcomes attributable to obesity: a cross-sectional exploration of body mass index and waist circumference combinations

BACKGROUND: Recent evidence suggests that a substantial subgroup of the population who have a high-risk waist circumference (WC) do not have an obese body mass index (BMI). This study aimed to explore whether including those with a non-obese BMI but high risk WC as 'obese' improves prediction of adiposity-related metabolic outcomes.

METHODS: Eleven thousand, two hundred forty-seven participants were recruited. Height, weight and WC were measured. Ten thousand, six hundred fifty-nine participants with complete data were included. Adiposity categories were defined as: BMI(N)/WC(N), BMI(N)/WC(O), BMI(O)/WC(N), and BMI(O)/WC(O) (N = non-obese and O = obese). Population attributable fraction, area under the receiver operating characteristic curve (AUC), and odds ratios (OR) were calculated.

RESULTS: Participants were on average 48 years old and 50 % were men. The proportions of BMI(N)/WC(N), BMI(N)/WC(O), BMI(O)/WC(N) and BMI(O)/WC(O) were 68, 12, 2 and 18 %, respectively. A lower proportion of diabetes was attributable to obesity defined using BMI alone compared to BMI and WC combined (32 % vs 47 %). AUC for diabetes was also lower when obesity was defined using BMI alone (0.62 vs 0.66). Similar results were observed for all outcomes. The odds for hypertension, dyslipidaemia, diabetes and CVD were increased for those with BMI(N)/WC(O) (OR range 1.8-2.7) and BMI(O)/WC(O) (OR 1.9-4.9) compared to those with BMI(N)/WC(N).

CONCLUSIONS: Current population monitoring, assessing obesity by BMI only, misses a proportion of the population who are at increased health risk through excess adiposity. Improved identification of those at increased health risk needs to be considered for better prioritisation of policy and resources.