The findings from a single pass deghoster prototype for terrestrial transmitted video

A deterministic prototype video deghoster is presented which is capable of calculating all the multipath channel distortion characteristics in one single pass and subsequently removing the multipath distortions, commonly termed ghosts. Within the system, a channel identification algorithm finds in isolation all the ghost components while a dedicated DSP filter subsystem is capable of removing ghosts in real time. The results from the system are presented.

A new detector for ghosted VIF signals

Under multipath conditions, video intermediate frequency (VIF) detectors may generate a local oscillator phase error and consequently produce a dispersed detected signal due to the presence of additional IF carriers. A new detector is presented which by processing the detected phase quadrature information, derives the correct phase for synchronous detection in the presence of multipath effects. This minimises dispersion and produces a detected video signal with the linear addition of amplitude scaled ghosts.

Random-walk-based characterisation of multiple access interference in a DS/SSMA system

The problem of calculating the probability of error in a DS/SSMA system has been extensively studied for more than two decades. When random sequences are employed some conditioning must be done before the application of the central limit theorem is attempted, leading to a Gaussian distribution. The authors seek to characterise the multiple access interference as a random-walk with a random number of steps, for random and deterministic sequences. Using results from random-walk theory, they model the interference as a K-distributed random variable and use it to calculate the probability of error in the form of a series, for a DS/SSMA system with a coherent correlation receiver and BPSK modulation under Gaussian noise. The asymptotic properties of the proposed distribution agree with other analyses. This is, to the best of the authors' knowledge, the first attempt to propose a non-Gaussian distribution for the interference. The modelling can be extended to consider multipath fading and general modulation

Reusing values in a dynamic conditional execution architecture

A Execução Condicional Dinâmica (DCE) é uma alternativa para redução dos custos relacionados a desvios previstos incorretamente. A idéia básica é buscar todos os fluxos produzidos por um desvio que obedecem algumas restrições relativas à complexidade e tamanho. Como conseqüência, um número menor de previsões é executado, e assim, um número mais baixo de desvios é incorretamente previsto. Contudo, tal como outras soluções multi-fluxo, o DCE requer uma estrutura de controle mais complexa. Na arquitetura DCE, é observado que várias réplicas da mesma instrução são despachadas para as unidades funcionais, bloqueando recursos que poderiam ser utilizados por outras instruções. Essas réplicas são geradas após o ponto de convergência dos diversos fluxos em execução e são necessárias para garantir a semântica correta entre instruções dependentes de dados. Além disso, o DCE continua produzindo réplicas até que o desvio que gerou os fluxos seja resolvido. Assim, uma seção completa do código pode ser replicado, reduzindo o desempenho. Uma alternativa natural para esse problema é reusar essas seções (ou traços) que são replicadas. O objetivo desse trabalho é analisar e avaliar a efetividade do reuso de valores na arquitetura DCE. Como será apresentado, o princípio do reuso, em diferentes granularidades, pode reduzir efetivamente o problema das réplicas e levar a aumentos de desempenho.

Os benefícios de impactar: as mitigações contraditórias do Conselho de Desenvolvimento Urbano do Recife

Esta dissertação estuda as medidas mitigadoras nos processos de licenciamento dos Empreendimentos de Impacto, determinadas pelo Conselho de Desenvolvimento Urbano do Recife – CDU. Busca contribuir com a eficácia da administração pública municipal quanto aos critérios e considerações necessárias para a aprovação de Empreendimentos de Impacto, num contexto do aumento significativo da demanda por essa tipologia de projeto nos órgãos de regulação. Foi analisado o processo de discussão e determinação das diretrizes de mitigação para os Empreendimentos de Impacto na cidade do Recife na última década. A coleta dos dados teve como base a pesquisa documental de legislações e registros oficiais, na tramitação dos projetos, bem como da utilização de entrevistas espontâneas, semiestruturadas, com atores do poder público e sociedade civil. Esclarece o papel e a importância do CDU no processo de gestão democrática, mostrando as características dos Empreendimentos de Impacto, bem como as influências negativas e positivas das diretrizes mitigadoras na qualidade de vida urbana e o entendimento sobre quem é o real beneficiado. As análises constatam que as medidas mitigadoras propostas são ineficazes, pois, são ações compulsórias, ou seja, obrigações legais que o empreendedor deveria cumprir. As diretrizes de compensações são baseadas em diagnósticos inadequados, sem a incorporação de propostas dos grupos sociais afetados e sem avaliações da eficiência das mitigações dirimidas. Na maioria das vezes, apenas servem de incremento local, beneficiando o empreendimento, sem um planejamento macro, desconsiderando o papel da gestão pública no desenvolvimento sustentável da cidade.

Podcast na educação brasileira: natureza, potencialidades e implicações de uma tecnologia da comunicação

This thesis aims to build a panoramic analysis with the intention of providing the theoretical initial a thought articulated educational of podcast, a technology orality distributed demand. This joint search considering the various spheres that educational technology in Brazilian use, both in school and non-school contexts, including scenarios and distance. This study unites questions addressed piecemeal in the area to new perspectives about the podcast, in order to characterize its nature, examining such technology from a perspective of educational technology itself, as well as unveiling its main potentials and implications. The survey was conducted from the combined use of quantitative and qualitative categories, with emphasis on the last one. The method of participant observation was followed by immersion of the researcher in the audience groups of Brazilians podcasts. Data collection with sources held in non-school contexts, from a look at targeted interactions given the blogs of Brazilian productions, as well as from open-ended interviews with producers - made online - besides giving themselves from the hearing itself about five hundred podcasts of Brazil. In the school context, the research focused on a literature review of the literature of the study area. Were added to the corpus described statistics derived mainly from "Podpesquisa 2009," Numerical major survey on the use of podcasts in Brazil. The articulation and analysis of the collected data, we used the concept of Education Paulo Freire (1971, 1987), so that, understanding it as synonymous to communication - understood this concept in Freire - were able to reveal the various ramifications educational podcast Brazilian atmosphere permeated by a dialogic between its participants. Moreover, the ideas of Célestin Freinet (1998) about the cooperation, while education practice, conducted the analyzes productive technology addressed in this work. The philosophical thought of Andrew Feenberg (2003) on the notion of "technologies" buoyed technological design elaborate. Such consideration provided the foundation for the reflections and proposals offered in this study, which, in the characterization of the oral nature of the podcast - especially their version for the deaf - appropriated the placements Luis Antonio Marcuschi (2001) about the relationship between orality and writing. In addition to these references, several other authors were considered, dealing with issues that pervade the theme here delimited, contemplating discussions on topics such as educational interest, online production, inclusive education, among other aspects. At the end, there was the podcast as a technology, while still reproducing social asymmetries Brazilian fairly directed at promoting mitigations hierarchical and open production in digital orality promotes. In view of its technical and educational implications in national use, the technology study has revealed potential relevant to the sophistication of teaching practices with orality, in various contexts, and proved adequate to serve as a motto to the revision of school practices, to even the very role of the school. This, by the prospects unveiled here, can, through the podcast, mitigate their questions reproductivist to constitute themselves as under privileged communication, boosted by critical rescue and sophistication of management through the most basic education component: speech

Modelo 2,5D de predição de propagação para ambientes interiores utilizando o método do traçado de raios

A 2.5D ray-tracing propagation model is proposed to predict radio loss in indoor environment. Specifically, we opted for the Shooting and Bouncing Rays (SBR) method, together with the Geometrieal Theory of Diffrartion (GTD). Besides the line-of-sight propagation (LOS), we consider that the radio waves may experience reflection, refraction, and diffraction (NLOS). In the Shooting and Bouncing Rays (SBR) method, the transmitter antenna launches a bundle of rays that may or may not reach the receiver. Considering the transmitting antenna as a point, the rays will start to launch from this position and can reach the receiver either directly or after reflections, refractions, diffractions, or even after any combination of the previous effects. To model the environment, a database is built to record geometrical characteristics and information on the constituent materials of the scenario. The database works independently of the simulation program, allowing robustness and flexibility to model other seenarios. Each propagation mechanism is treated separately. In line-of-sight propagation, the main contribution to the received signal comes from the direct ray, while reflected, refracted, and diffracted signal dominate when the line-of-sight is blocked. For this case, the transmitted signal reaches the receiver through more than one path, resulting in a multipath fading. The transmitting channel of a mobile system is simulated by moving either the transmitter or the receiver around the environment. The validity of the method is verified through simulations and measurements. The computed path losses are compared with the measured values at 1.8 GHz ftequency. The results were obtained for the main corridor and room classes adjacent to it. A reasonable agreement is observed. The numerical predictions are also compared with published data at 900 MHz and 2.44 GHz frequencies showing good convergence

Modulação quantizada para sistemas com codificação wavelet sujeitos ao desvanecimento rayleigh

Wavelet coding is an efficient technique to overcome the multipath fading effects, which are characterized by fluctuations in the intensity of the transmitted signals over wireless channels. Since the wavelet symbols are non-equiprobable, modulation schemes play a significant role in the overall performance of wavelet systems. Thus the development of an efficient design method is crucial to obtain modulation schemes suitable for wavelet systems, principally when these systems employ wavelet encoding matrixes of great dimensions. In this work, it is proposed a design methodology to obtain sub-optimum modulation schemes for wavelet systems over Rayleigh fading channels. In this context, novels signal constellations and quantization schemes are obtained via genetic algorithm and mathematical tools. Numerical results obtained from simulations show that the wavelet-coded systems derived here have very good performance characteristics over fading channels

Antenas monopolo planar com patch em anel circular para sistemas UWB

The microstrip antennas are largely used in wireless communication systems due to their low cost, weight, less complex construction and manufacturing, in addition to its versatility. UWB systems have emerged as an alternative to wireless communications over short distances because they offer of higher capacity and lower multipath distortion than other systems with the same purpose. Combining the advantages of microstrip antennas to the characteristics of UWB, it is possible to develop more and more smaller devices, with diverse geometries to operate satisfactorily in these systems. This paper aims to propose alternatives to microstrip antennas for UWB systems operate in the range between 3.1 and 10.6 GHz, with a patch on circular ring. Some techniques are analyzed and employed to increase the bandwidth of proposed antenna: the insertion of a parasitic elements and a rectangular slit in the displaced ground plane. For this, key issues are presented as the basic principles of UWB systems, the fundamental theory of antennas and microstrip antennas. The simulations and experimental characterization of constructed antennas are presented, as well as analysis of parameters such as bandwidth and radiation pattern

Avaliação de desempenho da codificação wavelet em canais seletivos em frequência

Wavelet coding has emerged as an alternative coding technique to minimize the fading effects of wireless channels. This work evaluates the performance of wavelet coding, in terms of bit error probability, over time-varying, frequency-selective multipath Rayleigh fading channels. The adopted propagation model follows the COST207 norm, main international standards reference for GSM, UMTS, and EDGE applications. The results show the wavelet coding s efficiency against the inter symbolic interference which characterizes these communication scenarios. This robustness of the presented technique enables its usage in different environments, bringing it one step closer to be applied in practical wireless communication systems

Improving the GNSS positioning stochastic model in the presence of ionospheric scintillation

Ionospheric scintillations are caused by time-varying electron density irregularities in the ionosphere, occurring more often at equatorial and high latitudes. This paper focuses exclusively on experiments undertaken in Europe, at geographic latitudes between similar to 50 degrees N and similar to 80 degrees N, where a network of GPS receivers capable of monitoring Total Electron Content and ionospheric scintillation parameters was deployed. The widely used ionospheric scintillation indices S4 and sigma(phi) represent a practical measure of the intensity of amplitude and phase scintillation affecting GNSS receivers. However, they do not provide sufficient information regarding the actual tracking errors that degrade GNSS receiver performance. Suitable receiver tracking models, sensitive to ionospheric scintillation, allow the computation of the variance of the output error of the receiver PLL (Phase Locked Loop) and DLL (Delay Locked Loop), which expresses the quality of the range measurements used by the receiver to calculate user position. The ability of such models of incorporating phase and amplitude scintillation effects into the variance of these tracking errors underpins our proposed method of applying relative weights to measurements from different satellites. That gives the least squares stochastic model used for position computation a more realistic representation, vis-a-vis the otherwise 'equal weights' model. For pseudorange processing, relative weights were computed, so that a 'scintillation-mitigated' solution could be performed and compared to the (non-mitigated) 'equal weights' solution. An improvement between 17 and 38% in height accuracy was achieved when an epoch by epoch differential solution was computed over baselines ranging from 1 to 750 km. The method was then compared with alternative approaches that can be used to improve the least squares stochastic model such as weighting according to satellite elevation angle and by the inverse of the square of the standard deviation of the code/carrier divergence (sigma CCDiv). The influence of multipath effects on the proposed mitigation approach is also discussed. With the use of high rate scintillation data in addition to the scintillation indices a carrier phase based mitigated solution was also implemented and compared with the conventional solution. During a period of occurrence of high phase scintillation it was observed that problems related to ambiguity resolution can be reduced by the use of the proposed mitigated solution.

GPS Satellite Kinematic Relative Positioning: Analyzing and Improving the Functional Mathematical Model Using Wavelets

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Using cubic splines to mitigate systematic errors in GPS relative positioning

Systematic errors can have a significant effect on GPS observable. In medium and long baselines the major systematic error source are the ionosphere and troposphere refraction and the GPS satellites orbit errors. But, in short baselines, the multipath is more relevant. These errors degrade the accuracy of the positioning accomplished by GPS. So, this is a critical problem for high precision GPS positioning applications. Recently, a method has been suggested to mitigate these errors: the semiparametric model and the penalised least squares technique. It uses a natural cubic spline to model the errors as a function which varies smoothly in time. The systematic errors functions, ambiguities and station coordinates, are estimated simultaneously. As a result, the ambiguities and the station coordinates are estimated with better reliability and accuracy than the conventional least square method.

Avaliação do nível de multicaminho no posicionamento relativo GPS e sua atenuação através da análise de multiresolução

The multipath effect affects the differential and relative positioning, even that one involving short baselines. So it is necessary to detect this effect, check the caused error level, and mainly, its removal. This paper aims at analysing and comparing some useful components in the detection of this effect. These components are the Signal to Noise Ratio (SNR), the values of MP1 and MP2 obtained from the TEQC software that indicates the multipath level in the carriers L1 and L2, the multipath repeatability in consecutive days and the elevation angle and the azimuth of the satellites. For this purpose, an experiment is carried out, comparing such components in the presence and the absence of reflector objects that cause the multipath. Not only there is clear multipath repeatability in the residuals, but it also appears in the measures SNR, MP1 and MP2, reaching up 99% of correlation. For reduction, at least, of the high frequency multipath effect, the Multi-Resolution Analysis using wavelets is applied in the double differences (DD) measures. Some statistical tests were accomplished, which indicate results improvement, and mainly, larger reliability in the solution of the ambiguities, reaching up 49% of improvement concerning the Ratio test without applying the proposed method.

Mitigating systematic errors for single frequency GPS receivers employing a penalized least squares methodology

Among the positioning systems that compose GNSS (Global Navigation Satellite System), GPS has the capability of providing low, medium and high precision positioning data. However, GPS observables may be subject to many different types of errors. These systematic errors can degrade the accuracy of the positioning provided by GPS. These errors are mainly related to GPS satellite orbits, multipath, and atmospheric effects. In order to mitigate these errors, a semiparametric model and the penalized least squares technique were employed in this study. This is similar to changing the stochastical model, in which error functions are incorporated and the results are similar to those in which the functional model is changed instead. Using this method, it was shown that ambiguities and the estimation of station coordinates were more reliable and accurate than when employing a conventional least squares methodology.