A multi-objective genetic algorithm optimisation using variable speed pumps in water distribution systems

Due to its practical importance and inherent complexity, the optimisation of distribution networks for supplying drinking water has been the subject of extensive study for the past 30 years. The optimization is governed by sizing the pipes in the water distribution network (WDN) and / or optimises specific parts of the network such as pumps, tanks etc. or try to analyse and optimise the reliability of a WDN. In this thesis, the author has analysed two different WDNs (Anytown City and Cabrera city networks), trying to solve and optimise a multi-objective optimisation problem (MOOP). The main two objectives in both cases were the minimisation of Energy Cost (€) or Energy consumption (kWh), along with the total Number of pump switches (TNps) during a day. For this purpose, a decision support system generator for Multi-objective optimisation used. Its name is GANetXL and has been developed by the Center of Water System in the University of Exeter. GANetXL, works by calling the EPANET hydraulic solver, each time a hydraulic analysis has been fulfilled. The main algorithm used, was a second-generation algorithm for multi-objective optimisation called NSGA_II that gave us the Pareto fronts of each configuration. The first experiment that has been carried out was the network of Anytown city. It is a big network with a pump station of four fixed speed parallel pumps that are boosting the water dynamics. The main intervention was to change these pumps to new Variable speed driven pumps (VSDPs), by installing inverters capable to diverse their velocity during the day. Hence, it’s been achieved great Energy and cost savings along with minimisation in the number of pump switches. The results of the research are thoroughly illustrated in chapter 7, with comments and a variety of graphs and different configurations. The second experiment was about the network of Cabrera city. The smaller WDN had a unique FS pump in the system. The problem was the same as far as the optimisation process was concerned, thus, the minimisation of the energy consumption and in parallel the minimisation of TNps. The same optimisation tool has been used (GANetXL).The main scope was to carry out several and different experiments regarding a vast variety of configurations, using different pump (but this time keeping the FS mode), different tank levels, different pipe diameters and different emitters coefficient. All these different modes came up with a large number of results that were compared in the chapter 8. Concluding, it should be said that the optimisation of WDNs is a very interested field that has a vast space of options to deal with. This includes a large number of algorithms to choose from, different techniques and configurations to be made and different support system generators. The researcher has to be ready to “roam” between these choices, till a satisfactory result will convince him/her that has reached a good optimisation point.

Measurement of Advance Directive and Medical Treatment Decision-Making Capacity of Older Adults

The objective of this study was to characterize two components of decisional competence that are relevant to advance directive (AD) completion and medical treatment decision making among a subsample of older adults hospitalized in acute care settings.

Impact of the availability of an influenza virus rapid antigen test on diagnostic decision making in a pediatric emergency department

OBJECTIVES: Fever is one of the most commonly seen symptoms in the pediatric emergency department. The objective of this study was to observe how the rapid testing for influenza virus impacts on the management of children with fever. METHODS: We performed a review of our pediatric emergency department records during the 2008/2009 annual influenza season. The BinaxNow Influenza A+B test was performed on patients with the following criteria: age 1.0 to 16.0 years, fever greater than 38.5 °C, fever of less than 96 hours' duration after the onset of clinical illness, clinical signs compatible with acute influenza, and nontoxic appearance. Additional laboratory tests were performed at the treating physician's discretion. RESULTS: The influenza rapid antigen test was performed in 192 children. One hundred nine (57%) were influenza positive, with the largest fraction (101 patients) positive for influenza A. The age distribution did not differ between children with negative and positive test results (mean, 5.3 vs. 5.1 years, not statistically significant). A larger number of diagnostic tests were performed in the group of influenza-negative patients. Twice as many complete blood counts, C-reactive protein determinations, lumbar punctures, and urinalyses were ordered in the latter group. CONCLUSIONS: Rapid diagnosis of influenza in the pediatric emergency department affects the management of febrile children as the confirmation of influenza virus infection decreases additional diagnostic tests ordered.

Tenofovir-containing nucleoside/nucleotide-only antiretroviral maintenance therapy: decision making and virological outcome

OBJECTIVE: To assess the virological outcome of patients with undetectable human immunodeficiency (HI) viremia switched to tenofovir (TDF)-containing nucleosideonly (NUKE-only) treatments and to investigate the factors influencing the physicians' decision for application of a nonestablished therapy. METHOD: Patients' characteristics and history were taken from the cohort database. To study the decision-making process, questionnaires were sent to all treating physicians. RESULTS: 49 patients were changed to TDF-containing NUKE-only treatment and 46 had a follow-up measurement of HI viremia. Virological failure occurred in 16 (35%) patients. Virological failure was associated with previous mono or dual therapy and with a regimen including didanosine or abacavir. No failure occurred in 15 patients without these predisposing factors. The main reasons for change to TDF-containing NUKE-only treatment were side effects and presumed favorable toxicity profile. The rationale behind this decision was mainly analogy to the zidovudine/lamivudine/abacavir maintenance therapy. CONCLUSION: TDF-containing NUKE-only treatment is associated with high early failure rates in patients with previous nucleoside reverse transcriptase inhibitor mono or dual therapy and in drug combinations containing didanosine or abacavir but not in patients without these predisposing factors. In HIV medicine, treatment strategies that are not evidence-based are followed by a minority of experienced physicians and are driven by patients' needs, mainly to minimize treatment side effects.

Assessing Decision Making Strategies In Construction Management By Using A Schedule-Based Simulation Framework

During the project, managers encounter numerous contingencies and are faced with the challenging task of making decisions that will effectively keep the project on track. This task is very challenging because construction projects are non-prototypical and the processes are irreversible. Therefore, it is critical to apply a methodological approach to develop a few alternative management decision strategies during the planning phase, which can be deployed to manage alternative scenarios resulting from expected and unexpected disruptions in the as-planned schedule. Such a methodology should have the following features but are missing in the existing research: (1) looking at the effects of local decisions on the global project outcomes, (2) studying how a schedule responds to decisions and disruptive events because the risk in a schedule is a function of the decisions made, (3) establishing a method to assess and improve the management decision strategies, and (4) developing project specific decision strategies because each construction project is unique and the lessons from a particular project cannot be easily applied to projects that have different contexts. The objective of this dissertation is to develop a schedule-based simulation framework to design, assess, and improve sequences of decisions for the execution stage. The contribution of this research is the introduction of applying decision strategies to manage a project and the establishment of iterative methodology to continuously assess and improve decision strategies and schedules. The project managers or schedulers can implement the methodology to develop and identify schedules accompanied by suitable decision strategies to manage a project at the planning stage. The developed methodology also lays the foundation for an algorithm towards continuously automatically generating satisfactory schedule and strategies through the construction life of a project. Different from studying isolated daily decisions, the proposed framework introduces the notion of {em decision strategies} to manage construction process. A decision strategy is a sequence of interdependent decisions determined by resource allocation policies such as labor, material, equipment, and space policies. The schedule-based simulation framework consists of two parts, experiment design and result assessment. The core of the experiment design is the establishment of an iterative method to test and improve decision strategies and schedules, which is based on the introduction of decision strategies and the development of a schedule-based simulation testbed. The simulation testbed used is Interactive Construction Decision Making Aid (ICDMA). ICDMA has an emulator to duplicate the construction process that has been previously developed and a random event generator that allows the decision-maker to respond to disruptions in the emulation. It is used to study how the schedule responds to these disruptions and the corresponding decisions made over the duration of the project while accounting for cascading impacts and dependencies between activities. The dissertation is organized into two parts. The first part presents the existing research, identifies the departure points of this work, and develops a schedule-based simulation framework to design, assess, and improve decision strategies. In the second part, the proposed schedule-based simulation framework is applied to investigate specific research problems.

Libre Courseware For Bayesian Decision Making

This paper describes the ideas and problems of the Edukalibre e-learning project, in which the author takes part. The basic objective of the project shares the development and exploitation of software components for web-based information systems applied to education as well as organizing of teaching material for them. The paper concerns a problem of the mathematical-oriented courseware and describes the experience in developing LaTeX-supporting online converting tool.

GRASP with Hybrid Path Relinking for Bi-Objective Winner Determination in Combinatorial Transportation Auctions

The procurement of transportation services via large-scale combinatorial auctions involves a couple of complex decisions whose outcome highly influences the performance of the tender process. This paper examines the shipper's task of selecting a subset of the submitted bids which efficiently trades off total procurement cost against expected carrier performance. To solve this bi-objective winner determination problem, we propose a Pareto-based greedy randomized adaptive search procedure (GRASP). As a post-optimizer we use a path relinking procedure which is hybridized with branch-and-bound. Several variants of this algorithm are evaluated by means of artificial test instances which comply with important real-world characteristics. The two best variants prove superior to a previously published Pareto-based evolutionary algorithm.

Fuzzy Multi-Objective Linear Programming and Simulation Approach to the Development of Valid and Realistic Master Production Schedule

Master production schedule (MPS) plays an important role in an integrated production planning system. It converts the strategic planning defined in a production plan into the tactical operation execution. The MPS is also known as a tool for top management to control over manufacture resources and becomes input of the downstream planning levels such as material requirement planning (MRP) and capacity requirement planning (CRP). Hence, inappropriate decision on the MPS development may lead to infeasible execution, which ultimately causes poor delivery performance. One must ensure that the proposed MPS is valid and realistic for implementation before it is released to real manufacturing system. In practice, where production environment is stochastic in nature, the development of MPS is no longer simple task. The varying processing time, random event such as machine failure is just some of the underlying causes of uncertainty that may be hardly addressed at planning stage so that in the end the valid and realistic MPS is tough to be realized. The MPS creation problem becomes even more sophisticated as decision makers try to consider multi-objectives; minimizing inventory, maximizing customer satisfaction, and maximizing resource utilization. This study attempts to propose a methodology for MPS creation which is able to deal with those obstacles. This approach takes into account uncertainty and makes trade off among conflicting multi-objectives at the same time. It incorporates fuzzy multi-objective linear programming (FMOLP) and discrete event simulation (DES) for MPS development.

The SAKK cancer-specific geriatric assessment (C-SGA): a pilot study of a brief tool for clinical decision-making in older cancer patients

BACKGROUND Recommendations from international task forces on geriatric assessment emphasize the need for research including validation of cancer-specific geriatric assessment (C-SGA) tools in oncological settings. The objective of this study was to evaluate the feasibility of the SAKK Cancer-Specific Geriatric Assessment (C-SGA) in clinical practice. METHODS A cross sectional study of cancer patients >=65 years old (N = 51) with pathologically confirmed cancer presenting for initiation of chemotherapy treatment (07/01/2009-03/31/2011) at two oncology departments in Swiss canton hospitals: Kantonsspital Graubunden (KSGR N = 25), Kantonsspital St. Gallen (KSSG N = 26). Data was collected using three instruments, the SAKK C-SGA plus physician and patient evaluation forms. The SAKK C-SGA includes six measures covering five geriatric assessment domains (comorbidity, function, psychosocial, nutrition, cognition) using a mix of medical record abstraction (MRA) and patient interview. Five individual domains and one overall SAKK C-SGA score were calculated and dichotomized as below/above literature-based cut-offs. The SAKK C-SGA was evaluated by: patient and physician estimated time to complete, ease of completing, and difficult or unanswered questions. RESULTS Time to complete the patient questionnaire was considered acceptable by almost all (>=96%) patients and physicians. Patients reported slightly shorter times to complete the questionnaire than physicians (17.33 +/- 7.34 vs. 20.59 +/- 6.53 minutes, p = 0.02). Both groups rated the patient questionnaire as easy/fairly easy to complete (91% vs. 84% respectively, p = 0.14) with few difficult or unanswered questions. The MRA took on average 8.32 +/- 4.72 minutes to complete. Physicians (100%) considered time to complete MRA acceptable, 96% rated it as easy/fairly easy to complete. Individual study site populations differed on health-related characteristics (excellent/good physician-rated general health KSGR 71% vs. KSSG 32%, p = 0.007). The overall mean C-SGA score was 2.4 +/- 1.12. Patients at KSGR had lower C-SGA scores (2.00 +/- 1.19 vs. 2.81 +/- 0.90, p = 0.009) and a smaller proportion (28% vs.65%, p = 0.008) was above the C-SGA cut-off score compared to KSSG. CONCLUSIONS These results suggest the SAKK C-SGA is a feasible practical tool for use in clinical practice. It demonstrated discriminative ability based on objective geriatric assessment measures, but additional investigations on use for clinical decision-making are warranted. The SAKK C-SGA also provides important usable domain information for intervention to optimize outcomes in older cancer patients.

Guidelines for WB3 Part III: Stakeholder workshop 2: Selection and decision on prevention and mitigation strategies to be implemented

These guidelines were developed in the context of working block 3 of the DESIRE project. They address the facilitators in the 18 DESIRE study sites and support them in conducting stakeholder workshops aiming at the selection and decision on mitigation strategies to be implemented in the study site context. The decision-making process is supported by a multi-objective decision support system (MODSS) Software called 'Facilitator'.

Understanding and Characterizing Shared Decision-Making and Behavioral Intent in Medical Uncertainty

Applying Theoretical Constructs to Address Medical Uncertainty Situations involving medical reasoning usually include some level of medical uncertainty. Despite the identification of shared decision-making (SDM) as an effective technique, it has been observed that the likelihood of physicians and patients engaging in shared decision making is lower in those situations where it is most needed; specifically in circumstances of medical uncertainty. Having identified shared decision making as an effective, yet often a neglected approach to resolving a lack of information exchange in situations involving medical uncertainty, the next step is to determine the way(s) in which SDM can be integrated and the supplemental processes that may facilitate its integration. SDM involves unique types of communication and relationships between patients and physicians. Therefore, it is necessary to further understand and incorporate human behavioral elements - in particular, behavioral intent - in order to successfully identify and realize the potential benefits of SDM. This paper discusses the background and potential interaction between the theories of shared decision-making, medical uncertainty, and behavioral intent. Identifying Shared Decision-Making Elements in Medical Encounters Dealing with Uncertainty A recent summary of the state of medical knowledge in the U.S. reported that nearly half (47%) of all treatments were of unknown effectiveness, and an additional 7% involved an uncertain tradeoff between benefits and harms. Shared decision-making (SDM) was identified as an effective technique for managing uncertainty when two or more parties were involved. In order to understand which of the elements of SDM are used most frequently and effectively, it is necessary to identify these key elements, and understand how these elements related to each other and the SDM process. The elements identified through the course of the present research were selected from basic principles of the SDM model and the “Data, Information, Knowledge, Wisdom” (DIKW) Hierarchy. The goal of this ethnographic research was to identify which common elements of shared decision-making patients are most often observed applying in the medical encounter. The results of the present study facilitated the understanding of which elements patients were more likely to exhibit during a primary care medical encounter, as well as determining variables of interest leading to more successful shared decision-making practices between patients and their physicians. Understanding Behavioral Intent to Participate in Shared Decision-Making in Medically Uncertain Situations Objective: This article describes the process undertaken to identify and validate behavioral and normative beliefs and behavioral intent of men between the ages of 45-70 with regard to participating in shared decision-making in medically uncertain situations. This article also discusses the preliminary results of the aforementioned processes and explores potential future uses of this information which may facilitate greater understanding, efficiency and effectiveness of doctor-patient consultations.Design: Qualitative Study using deductive content analysisSetting: Individual semi-structure patient interviews were conducted until data saturation was reached. Researchers read the transcripts and developed a list of codes.Subjects: 25 subjects drawn from the Philadelphia community.Measurements: Qualitative indicators were developed to measure respondents’ experiences and beliefs related to behavioral intent to participate in shared decision-making during medical uncertainty. Subjects were also asked to complete the Krantz Health Opinion Survey as a method of triangulation.Results: Several factors were repeatedly described by respondents as being essential to participate in shared decision-making in medical uncertainty. These factors included past experience with medical uncertainty, an individual’s personality, and the relationship between the patient and his physician.Conclusions: The findings of this study led to the development of a category framework that helped understand an individual’s needs and motivational factors in their intent to participate in shared decision-making. The three main categories include 1) an individual’s representation of medically uncertainty, 2) how the individual copes with medical uncertainty, and 3) the individual’s behavioral intent to seek information and participate in shared decision-making during times of medically uncertain situations.

End -of -life planning and decision -making: Implications for adults with mental retardation

This research focused on the topic of end-of-life planning and decision-making for adults affected by mental retardation. Adults with mental retardation have unique challenges in this regard, including difficulty communicating their wishes without assistance and diminished decision-making skills. The primary research objective was to identify factors that can affect opportunities for adults with mental retardation in community-based services settings (and their advocates) to be involved in planning and deciding about their own end-of-life experience. ^ A descriptive qualitative inquiry was designed to explore issues related to death and dying, and the notion of end-of-life planning, from the perspective of adults with mental retardation who receive publicly-funded community services ("clients") and family members of individuals who receive such services. Study participants were recruited from a single mental retardation service provider in a large urban setting (the "Agency"). Sixteen clients and 14 families of Agency clients took part. Client data collection was accomplished through face-to-face interviews, focus group meetings, and record reviews; family members were involved in a face-to-face interview only. ^ An initial coding scheme was developed based upon literature and policy reviews, and themes related to the research questions. Analysis involved extracting data from transcripts and records and placing it into appropriate thematic categories, building support for each theme with the accumulated data. Coding themes were modified to accommodate new data when it challenged existing themes. ^ Findings suggest that adults with mental retardation do have the requisite knowledge, interest, and ability to participate in decisions about their end-of-life experience and handling of affairs. Siblings are overwhelmingly the chosen future surrogates and they (or their children) will likely be the end-of-life advocates for their brothers and sisters affected by mental retardation. Findings further point to a need for increased awareness, accurate information, and improved communication about end-of-life issues, both in general and particular to adults affected by mental retardation. Also suggested by the findings is a need to focus on creating accommodations and adaptations that can best uncover a person's authentic views on life and death and related end-of-life preferences. Practical implications and suggestions for further research are also discussed. ^

Participatory modelling to support decision making in water management. A case study in the middle Guadiana basin, Spain.

The objective of this research was the implementation of a participatory process for the development of a tool to support decision making in water management. The process carried out aims at attaining an improved understanding of the water system and an encouragement of the exchange of knowledge and views between stakeholders to build a shared vision of the system. In addition, the process intends to identify impacts of possible solutions to given problems, which will help to take decisions.

Systematic Approach for the selection of monitoring technologies in CO2 geological storage projects. Application of multicriteria decision making

Geologic storage of carbon dioxide (CO2) has been proposed as a viable means for reducing anthropogenic CO2 emissions. Once injection begins, a program for measurement, monitoring, and verification (MMV) of CO2 distribution is required in order to: a) research key features, effects and processes needed for risk assessment; b) manage the injection process; c) delineate and identify leakage risk and surface escape; d) provide early warnings of failure near the reservoir; and f) verify storage for accounting and crediting. The selection of the methodology of monitoring (characterization of site and control and verification in the post-injection phase) is influenced by economic and technological variables. Multiple Criteria Decision Making (MCDM) refers to a methodology developed for making decisions in the presence of multiple criteria. MCDM as a discipline has only a relatively short history of 40 years, and it has been closely related to advancements on computer technology. Evaluation methods and multicriteria decisions include the selection of a set of feasible alternatives, the simultaneous optimization of several objective functions, and a decision-making process and evaluation procedures that must be rational and consistent. The application of a mathematical model of decision-making will help to find the best solution, establishing the mechanisms to facilitate the management of information generated by number of disciplines of knowledge. Those problems in which decision alternatives are finite are called Discrete Multicriteria Decision problems. Such problems are most common in reality and this case scenario will be applied in solving the problem of site selection for storing CO2. Discrete MCDM is used to assess and decide on issues that by nature or design support a finite number of alternative solutions. Recently, Multicriteria Decision Analysis has been applied to hierarchy policy incentives for CCS, to assess the role of CCS, and to select potential areas which could be suitable to store. For those reasons, MCDM have been considered in the monitoring phase of CO2 storage, in order to select suitable technologies which could be techno-economical viable. In this paper, we identify techniques of gas measurements in subsurface which are currently applying in the phase of characterization (pre-injection); MCDM will help decision-makers to hierarchy the most suitable technique which fit the purpose to monitor the specific physic-chemical parameter.

The analytic hierarchy process to support decision-making processes in infrastructure projects with social impact

There is an increasing awareness among all kinds of organisations (in business,government and civil society) about the benefits of jointly working with stakeholders to satisfy both their goals and the social demands placed upon them. This is particularly the case within corporate social responsibility (CSR) frameworks. In this regard, multi-criteria tools for decision-making like the analytic hierarchy process (AHP) described in the paper can be useful for the building relationships with stakeholders. Since these tools can reveal decision-maker’s preferences, the integration of opinions from various stakeholders in the decision-making process may result in better and more innovative solutions with significant shared value. This paper is based on ongoing research to assess the feasibility of an AHP-based model to support CSR decisions in large infrastructure projects carried out by Red Electrica de España, the sole transmission agent and operator of the Spanishelectricity system.