Modificação da superfície de óxidos de ferro por dextrana derivatizada para aplicações em liberação de fármaco

Pós-graduação em Química - IQ

Alteração volumétrica por análise microtomográfica, solubilidade e capacidade seladora bacteriana de diferentes materiais retro-obturadores

Pós-graduação em Odontologia - FOAR

Substituição isomórfica de íons gálio em zeólitas de estrutura mfi para modificação da acidez do catalisador e controle da desativação na desidratação do glicerol

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estratégias tecnológicas para aumento de solubilidade e diminuição de toxicidade do fármaco antifúngico anfotericina B

A Anfotericina B é o fármaco antifúngico referência desde a sua descoberta na década de 50 até os dias atuais para o tratamento de infecções fúngicas sistêmicas. O objetivo do trabalho é realizar uma revisão bibliográfica que forneça os sistemas de liberação comercializados e os que estão em estudo, focando estratégias tecnológicas que possam servir para resolver os problemas da baixa solubilidade em água e da alta nefrotoxicidade da Anfotericina B. A AmB é um fármaco que apresenta inexpressiva solubilidade em meio-aquoso, principalmente na região de pH dos fluídos biológicos (7,4–8,0), sendo administrado atualmente por via endovenosa. Justificando a importância desse estudo para a área farmacêutica, novos sistemas de liberação que usem a via oral, aumentarão a adesão por crianças e idosos, além de aumentar o arsenal terapêutico e diminuir os gastos com hospitalizações. Por ter a sua utilidade clínica limitada em razão de sua alta toxicidade, tem-se buscado direcionar a AmB especificamente para o fungo ou pelo menos para o local da infecção, mantendo-se longe o fármaco das células hospedeiras. Para isso, se busca diferentes veículos que não o desoxicolato (Fungizone). Por fim, as formulações lipídicas mostram-se com maior eficácia e com menor toxicidade comparadas a Anfotericina B-desoxicolato, mas não fazem parte da rotina hospitalar em razão do seu alto custo

Tratamento de modificação de eutético da liga AA356

Alloy Al-7%Si-0,3Mg (AA356), having an excellent combination of properties such as low solidification shrinkage and good fluidity, good weldability, high wear resistance, high strength to weight particularly in the automotive and aerospace engineering. The refinement of the structure aluminum silicon eutectic alloy is a fairly common practice in the casting, through the treatment knows as modification. You can get the modification for the addition of chemicals and rare earths, these have the ability to modify the structure of the eutectic, but only sodium and strontium produce a strong action modifier when used in low concentrations. The modifying effect of silicon grain turns into a fibrous form branched and enveloped by the metal matrix in the form of a composite structure that has the highest limit of tensile strength, ductility and machinability. This work will be obtained AA356 alloy ingots using two different types of molds: metal mold and sand mold. Macrographs will be made in ingots obtained for observation of the macrostructures obtained in both types of ingots. Will be sampled at strategic locations of the ingots to correlate microstructure and cooling rate. The results showed that the material of the ingot has a strong influence on the resulting micro-andmacrostructure

Estudo da modificação do ângulo do conjunto cilindro-pistão em motores de combustão interna

The aim of this study is to present those who are interested in mechanical engineering, specifically automotive engineering some ideas for improvements to the current concept of internal combustion engines. It is not intenden to change totally the design of the engine known today, but to exame the feasibility of reducing a small waste generated with the current positioning of the cylinder-piston assembly. The proposal solution consists in modifying the tilt cylinder-piston assembly in the angle between the rod and the cylinder axis. This inclination causes all the force generated in the combustion process within the cylinder is delivered to the rod.Delivery force is the made in the rod longitudinal direction and not on the axis of the cylinder, preventing the occurrence of a breakdown of the force generated in the combustion process. After analyzing the idea of repositioning the piston-cylinder assemble, it is concluded that the change has a positive result in the process of harnessing the power generated in the com bustion, but its not feasible due implementation to low gain presented in this study

Estudo do efeito do modificador Al-Sr no tratamento de modificação do eutético da liga AA356

The AA356 alloy is an alloy widely used in the automotive industry and aerospace due to its excellent mechanical properties. Refining the structure of eutectic silicon aluminum alloys is a fairly common practice in the foundry through treatment known as modification. This can be achieved by modifying agent adding chemicals such as contained in groups I and IIa of the periodic table and rare earths (europium, céreioi, praseodymium, neodymium, etc.). Has the ability to modify the structure of the eutectic, but only sodium and strontium produce an action modifier strong when used in low concentrations. The modifying effect of the shafts turn silicon into a fibrous form and branched surrounded by metallic matrix in the form of a composite structure that has the highest limit of tensile strength, ductility and machinability. In this work will be obtained ingots with and without the modifier type Al-10% Sr, made in sand molds and are generated and analyzed cooling curves and also the study of the macrostructure and microstructure of the solidified material. It was found that by adding the Al-Sr made shorten the solidification time and lower the grain size

Modificação da superfície do titânio e de sua liga Ti-6Al-4V por recobrimento com TiO2 e hidroxiapatita

In this work, the influence of modifications of the cp-Ti and Ti 6Al 4V alloy, by treating the surface with NaOH and depositing titanium oxide and hydroxyapatite by sol-gel method, on their biocompatibility was studied. The coatings were characterized by scanning electron microscopy and X-ray diffraction which showed that the coatings on Ti 6Al 4V are better than on cp-Ti. Adhesion tests showed that adhesion strength of the coatings on cp-Ti substrate is less than on Ti 6Al 4V as well as cytotoxicity for L929 fibroblast cells is higher

Efeito do Estrôncio (Sr) no tratamento de modificação do eutético da liga Al-1%Si

This study aimed to analyze the cooling curves, micro and macrograph alloy Al-1 %Si without the addition of strontium modifier and with the addition of the same. One of the ways of improving mechanical properties of alloy Al -Si is through the modification process. For the experiments two billets of the alloy Al-1%Si cast iron mold in a billet with addition of 0.02% strontium by weight, and the other billet without the addition of modifier were fused. In the solidification process of billet temperature was monitored and recorded every second for later plotting in Origin 8 program and analyzes the cooling curves obtained. The billets were cut and passed by grinding and polishing to perform the macrograph and micrographs. The results concerning the macrograph indicated that billet without the addition of Strontium particle size obtained was more refined than the billet where the strontium modifier was added. Regarding the micrograph, photos stemmed from the optical microscope didn´t show the expected modification effect by the addition of Strontium. This suggests that the low amount of silicon (1 %) present in the alloy used in this study interfered in the change process, because according to the literature review, Strontium 0.022 % by weight is sufficient to fully modify an alloy with 7% Silicon. The results from the cooling curve showed that both the eutectic temperature and the solidification time remained unchanged with the addition of strontium

Síntese e caracterização de hidrogéis de amido retrogradado e goma gelana utilizados como matriz em sistemas de liberação cólon específica de fármacos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo da modificação superficial de fibras de carbono por meio de tratamentos a plasma para o aumento da adesão na interface de compósitos fibra de carbono/PPS

Pós-graduação em Engenharia Mecânica - FEG

Efeito do trimetafosfato de sódio e do fluoreto sobre a solubilidade da hidroxiapatita: estudo in vitro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modificação superficial de nanopartículas de óxido de ferro por poli(ácido aspártico) reticulado

Pós-graduação em Química - IQ

Modificação de forma e dimensões dos arcos superior e inferior obtidas em modelos de estudo após expansão rápida da maxila com o aparelho hyrax

The aim of an orthodontic treatment is the achievement of a balanced, esthetic and, most of all, stable, intra and inter arches relationship. A common problem observed in occlusion is posterior crossbite and atresic maxilla. This problem may be treated by slow expansion, rapid expansion or surgically assisted expansion. For the present study cast models of 14 children between 7 and 11 years old were evaluated. There were 7 male and 7 female subjects that presented posterior crossbite and needed rapid maxillary expansion. The Hyrax appliance performed the therapy for correction of this transversal alteration, which is a common possibility in the treatment of this malocclusion. It was observed that the distance between the upper first molars and upper cuspids increased significantly; the length of the upper arch decreased and its perimeter increased significantly. At the lower arch there were no dimensional changes.