Should energy efficiency be traded off for other product attributes? : an analysis of air-conditioner regulation in Japan

This paper examines the functioning of energy efficiency standards and labeling policies for air conditioners in Japan. The results of our empirical analysis suggest that consumers respond more to label information, which benchmarks the energy efficiency performance of each product to a pre-specified target, than to direct performance measures. This finding provides justification for the setting, and regular updating, of target standards as well as their use in calculating relative performance measures. We also find, through graphical analysis, that air conditioner manufacturers face a tradeoff between energy efficiency and product compactness when they develop their products. This tradeoff, combined with the semi-regular upward revision of minimum energy efficiency standards, has led to the growth in indoor unit size of air conditioners in recent years. In the face of this phenomenon, regulatory rules were revised so that manufacturers could adhere to less stringent standards if the indoor unit size of their product remains below a certain size. Our demand estimates provide no evidence that larger indoor unit size causes disutility to consumers. It is therefore possible that the regulatory change was not warranted from a consumer welfare point of view.

A comparison of the vocational training system of Britain and West Germany as experienced by minimum-age school leavers.

The sectoral and occupational structure of Britain and West Germany has increasingly changed over the last fifty years from a manual manufacturing based to a non-manual service sector based one. There has been a trend towards more managerial and less menial type occupations. Britain employs a higher proportion of its population in the service sector than in manufacturing compared to West Germany, except in retailing, where West Germany employs twice as many people as Britain. This is a stable sector of the economy in terms of employment, but the requirements of the workforce have changed in line with changes in the industry in both countries. School leavers in the two countries, faced with the same options (FE, training schemes or employment) have opted for the various options in different proportions: young Germans are staying longer in education before embarking on training and young Britons are now less likely to go straight into employment than ten years ago. Training is becoming more accepted as the normal route into employment with government policy leading the way, but public opinion still slow to respond. This study investigates how vocational training has adapted to the changing requirements of industry, often determined by technological advancements. In some areas e.g. manufacturing industry the changes have been radical, in others such as retailing they have not, but skill requirements, not necessarily influenced by technology have changed. Social-communicative skills, frequently not even considered skills and therefore not included in training are coming to the forefront. Vocational training has adapted differently in the two countries: in West Germany on the basis of an established over-defined system and in Britain on the basis of an out-dated ill-defined and almost non-existent system. In retailing German school leavers opt for two or three year apprenticeships whereas British school leavers are offered employment with or without formalised training. The publicly held view of the occupation of sales assistant is one of low-level skill, low intellectual demands and a job anyone can do. The traditional skills - product knowledge, selling and social-communicative skills have steadily been eroded. In the last five years retailers have recognised that a return to customer service, utilising the traditional skills was going to be needed of their staff to remain competitive. This requires training. The German retail training system responded by adapting its training regulations in a long consultative process, whereas the British experimented with YTS, a formalised training scheme nationwide being a new departure. The thesis evaluates the changes in these regulations. The case studies in four retail outlets demonstrate that it is indeed product knowledge and selling and social-communicative skills which are fundamental to being a successful and content sales assistant in either country. When the skills are recognised and taught well and systematically the foundations for career development in retailing are laid in a labour market which is continually looking for better qualified workers. Training, when planned and conducted professionally is appreciated by staff and customers and of benefit to the company. In retailing not enough systematic training, to recognisable standards is carried out in Britain, whereas in West Germany the training system is nevertheless better prepared to show innovative potential as a structure and is in place on which to build. In Britain the reputation of the individual company has a greater role to play, not ensuring a national provision of good training in retailing.

Developing a model for consumer product safety evaluation

Safety enforcement practitioners within Europe and marketers, designers or manufacturers of consumer products need to determine compliance with the legal test of "reasonable safety" for consumer goods, to reduce the "risks" of injury to the minimum. To enable freedom of movement of products, a method for safety appraisal is required for use as an "expert" system of hazard analysis by non-experts in safety testing of consumer goods for implementation consistently throughout Europe. Safety testing approaches and the concept of risk assessment and hazard analysis are reviewed in developing a model for appraising consumer product safety which seeks to integrate the human factors contribution of risk assessment, hazard perception, and information processing. The model develops a system of hazard identification, hazard analysis and risk assessment which can be applied to a wide range of consumer products through use of a series of systematic checklists and matrices and applies alternative numerical and graphical methods for calculating a final product safety risk assessment score. It is then applied in its pilot form by selected "volunteer" Trading Standards Departments to a sample of consumer products. A series of questionnaires is used to select participating Trading Standards Departments, to explore the contribution of potential subjective influences, to establish views regarding the usability and reliability of the model and any preferences for the risk assessment scoring system used. The outcome of the two stage hazard analysis and risk assessment process is considered to determine consistency in results of hazard analysis, final decisions regarding the safety of the sample product and to determine any correlation in the decisions made using the model and alternative scoring methods of risk assessment. The research also identifies a number of opportunities for future work, and indicates a number of areas where further work has already begun.

Morphometry and biomass of the cultured mangrove oyster Crassostrea rhizophorae at the Urindeua river, eastern Amazonia, northern Brazil

The malacocultura, particularly oyster farming, appears on the world stage as one of the most viable alternatives to fishing decline and supply of fresh product. In Brazil, the development of mollusc cultivationis through the genus oyster cultivation Crassostrea, among them Crassostrea rhizophorae (Guilding, 1828), known for oyster-the-swamp, one of the main species of farmed bivalves in the state of Pará. This so it aimed to characterize the biomorphometrics relations, estimate the Shape Stabilization Index (IEF) of the shell and the yield of edible meat C. rhizophorae grown in an Amazonian coast, state of Pará, northern Brazil. When all is sampled 1,028 individuals, in April 2016, measuring the external morphometric measures (length, width and height) and total and visceral biomass. The results obtained are C. rhizophorae with (1) excellent biomorphometrics relationships among both external measures, the measures of the shell and biomass generating equations that satisfy morphometric pet species, (2) yield of edible meat 15% of the total biomass and variation in the shell along its development to adulthood, with a tendency to stabilize the reach 60mm in length.

Heurística de programação da produção para uma indústria cerâmica

Atualmente, uma organização industrial com vista a singrar no mercado global é fortemente influenciada por pressões que visam o aumento da eficiência global e consequente redução de custos operacionais. O desafio para as mesmas passa, portanto, por expurgar do produto tudo aquilo que não lhe acrescenta valor percetível pelo cliente e por maximizar a utilização dos vários recursos industriais instalados. No seguimento deste desafio, surge o Problema de Planeamento e Programação da Produção, ao qual é necessário dar uma resposta eficiente. Este projeto tem como objetivo estudar o problema da Programação da Produção numa indústria de pavimentos e revestimentos cerâmicos, desenvolvendo uma heurística construtiva capaz de traduzir com fiabilidade a realidade do processo produtivo da mesma e, se possível, auxiliar na sua resolução. O problema da programação da produção em estudo visa responder às questões: o quê, em que quantidade, quando e em que linha produzir, por forma a satisfazer as necessidades dos clientes num prazo previamente estipulado como admissível, garantindo o enchimento dos fornos ligados. Sem grandes constrangimentos ao normal lavor da Produção, pretende obter-se com a heurística planos de produção viáveis, que minimizem o tempo necessário para a conclusão do conjunto de referências com necessidades produtivas. O problema é também abordado através de um modelo exato como um problema de máquinas paralelas idênticas capacitado, com matriz de compatibilidades, setups de família e de subfamília e com lotes mínimos de produção. Quer a heurística quer o modelo de programação inteira mista desenvolvidos permitem obter planos de produção válidos, equivalentes aos obtidos atualmente pela empresa através dos meios de programação atuais, embora com um dispêndio de tempo muito inferior.

Bioprospecting and discovery of novel micoralgal isolates with multiple product potential.

Bio prospecting of microalgal resources from diverse ecologically distinctive locations and better understanding of the physiological conditions of diverse habitats will enable us to better exploit these organisms for the production of lipid and carotenoids.The potential for coproduction of lipid and carotenoids, that may be benefical to human health have gained interest in recent decades. Methods for co-production and separating higher value compounds such as carotenoids and lipids can offset the cost of algal biofuel production, making this source more commercially viable. 

The Behavior of Hydroxyl Units of Synthetic Goethite and its Dehydroxylated Product Hematite

The behavior of the hydroxyl units of synthetic goethite and its dehydroxylated product hematite was characterized using a combination of Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) during the thermal transformation over a temperature range of 180-270 degrees C. Hematite was detected at temperatures above 200 degrees C by XRD while goethite was not observed above 230 degrees C. Five intense OH vibrations at 3212-3194, 1687-1674, 1643-1640, 888-884 and 800-798 cm(-1), and a H2O vibration at 3450-3445 cm(-1) were observed for goethite. The intensity of hydroxyl stretching and bending vibrations decreased with the extent of dehydroxylation of goethite. Infrared absorption bands clearly show the phase transformation between goethite and hematite: in particular. the migration of excess hydroxyl units from goethite to hematite. Two bands at 536-533 and 454-452 cm(-1) are the low wavenumber vibrations of Fe-O in the hematite structure. Band component analysis data of FTIR spectra support the fact that the hydroxyl units mainly affect the a plane in goethite and the equivalent c plane in hematite.

Study on microwave dielectric properties of epoxy resin mixtures used for rapid product development

This paper presents a preliminary study on the dielectric properties and curing of three different types of epoxy resins mixed at various stichiometric mixture of hardener, flydust and aluminium powder under microwave energy. In this work, the curing process of thin layers of epoxy resins using microwave radiation was investigated as an alternative technique that can be implemented to develop a new rapid product development technique. In this study it was observed that the curing time and temperature were a function of the percentage of hardener and fillers presence in the epoxy resins. Initially dielectric properties of epoxy resins with hardener were measured which was directly correlated to the curing process in order to understand the properties of cured specimen. Tensile tests were conducted on the three different types of epoxy resins with hardener and fillers. Modifying dielectric properties of the mixtures a significant decrease in curing time was observed. In order to study the microstructural changes of cured specimen the morphology of the fracture surface was carried out by using scanning electron microscopy.

Exploring the effectiveness of virtual product placement on recall and recognition of new brands

This paper investigates the effectiveness of virtual product placement as a marketing tool by examining the relationship between brand recall and recognition and virtual product placement. It also aims to address a gap in the existing academic literature by focusing on the impact of product placement on recall and recognition of new brands. The growing importance of product placement is discussed and a review of previous research on product placement and virtual product placement is provided. The research methodology used to study the recall and recognition effects of virtual product placement are described and key findings presented. Finally, implications are discussed and recommendations for future research provided.