Common Coastal Plants in Florida: a guide to planting and maintenance

(PDF has 125 pages.)

Patterns of Impact Resulting from a 'Sit Less, Move More' Web-Based Program in Sedentary Office Employees

Purpose Encouraging office workers to 'sit less and move more' encompasses two public health priorities. However, there is little evidence on the effectiveness of workplace interventions for reducing sitting, even less about the longer term effects of such interventions and still less on dual-focused interventions. This study assessed the short and mid-term impacts of a workplace web-based intervention (Walk@WorkSpain, W@WS; 2010-11) on self-reported sitting time, step counts and physical risk factors (waist circumference, BMI, blood pressure) for chronic disease. Methods Employees at six Spanish university campuses (n=264; 42 +/- 10 years; 171 female) were randomly assigned by worksite and campus to an Intervention (used W@WS; n=129; 87 female) or a Comparison group (maintained normal behavior; n=135; 84 female). This phased, 19-week program aimed to decrease occupational sitting time through increased incidental movement and short walks. A linear mixed model assessed changes in outcome measures between the baseline, ramping (8 weeks), maintenance (11 weeks) and follow-up (two months) phases for Intervention versus Comparison groups. Results A significant 2 (group) x 2 (program phases) interaction was found for self-reported occupational sitting (F[3]=7.97, p=0.046), daily step counts (F[3]=15.68, p=0.0013) and waist circumference (F[3]=11.67, p=0.0086). The Intervention group decreased minutes of daily occupational sitting while also increasing step counts from baseline (446 +/- 126; 8,862 +/- 2,475) through ramping (+425 +/- 120; 9,345 +/- 2,435), maintenance (+422 +/- 123; 9,638 +/- 3,131) and follow-up (+414 +/- 129; 9,786 +/- 3,205). In the Comparison group, compared to baseline (404 +/- 106), sitting time remained unchanged through ramping and maintenance, but decreased at follow-up (-388 +/- 120), while step counts diminished across all phases. The Intervention group significantly reduced waist circumference by 2.1cms from baseline to follow-up while the Comparison group reduced waist circumference by 1.3cms over the same period. Conclusions W@WSis a feasible and effective evidence-based intervention that can be successfully deployed with sedentary employees to elicit sustained changes on "sitting less and moving more".

Maintenance of Multifemale Social Organization in a Group of Nomascus concolor at Wuliang Mountain, Yunnan, China

Many short-term studies have reported groups of black crested gibbons containing >= 2 adult females (Nomascus concolor). We report the stability of multifemale groups in this species over a period of 6 yr. Our focal group and 2 neighboring groups included 2 breeding females between March 2003 and June 2009. We also habituated 1 multifemale group to observers and present detailed information concerning their social relationships over a 9-mo observation period. We investigated interindividual distances and agonistic behavior among the 5 group members. The spatial relationship between the 3 adult members (1 male, 2 females) formed an equilateral triangle. A subadult male was peripheral to the focal group, while a juvenile male maintained a closer spatial relationship with the adult members. We observed little agonistic behavior among the adult members. The close spatial relationship and lack of high rates of agonistic behavior among females suggest that the benefits of living in a multifemale group were equal to or greater than the costs for both females, given their ecological and social circumstances. The focal group occupied a large home range that was likely to provide sufficient food sources for the 2 females and their offspring. Between March 2003 and June 2009, 1 adult female gave 2 births and the other one gave 1 birth. All individuals in the focal group survived to June 2009. A long-term comparative study focused on females living in multifemale groups and females living in pair-living groups would provide insight into understanding the evolutionary mechanisms of the social system in gibbons.

Automated Program Recognition

The key to understanding a program is recognizing familiar algorithmic fragments and data structures in it. Automating this recognition process will make it easier to perform many tasks which require program understanding, e.g., maintenance, modification, and debugging. This report describes a recognition system, called the Recognizer, which automatically identifies occurrences of stereotyped computational fragments and data structures in programs. The Recognizer is able to identify these familiar fragments and structures, even though they may be expressed in a wide range of syntactic forms. It does so systematically and efficiently by using a parsing technique. Two important advances have made this possible. The first is a language-independent graphical representation for programs and programming structures which canonicalizes many syntactic features of programs. The second is an efficient graph parsing algorithm.

Dependency Directed Reasoning for Complex Program Understanding

Artificial Intelligence research involves the creation of extremely complex programs which must possess the capability to introspect, learn, and improve their expertise. Any truly intelligent program must be able to create procedures and to modify them as it gathers information from its experience. [Sussman, 1975] produced such a system for a 'mini-world'; but truly intelligent programs must be considerably more complex. A crucial stepping stone in AI research is the development of a system which can understand complex programs well enough to modify them. There is also a complexity barrier in the world of commercial software which is making the cost of software production and maintenance prohibitive. Here too a system which is capable of understanding complex programs is a necessary step. The Programmer's Apprentice Project [Rich and Shrobe, 76] is attempting to develop an interactive programming tool which will help expert programmers deal with the complexity involved in engineering a large software system. This report describes REASON, the deductive component of the programmer's apprentice. REASON is intended to help expert programmers in the process of evolutionary program design. REASON utilizes the engineering techniques of modelling, decomposition, and analysis by inspection to determine how modules interact to achieve the desired overall behavior of a program. REASON coordinates its various sources of knowledge by using a dependency-directed structure which records the justification for each deduction it makes. Once a program has been analyzed these justifications can be summarized into a teleological structure called a plan which helps the system understand the impact of a proposed program modification.

Truth Maintenance Systems for Problem Solving

The thesis developed here is that reasoning programs which take care to record the logical justifications for program beliefs can apply several powerful, but simple, domain-independent algorithms to (1) maintain the consistency of program beliefs, (2) realize substantial search efficiencies, and (3) automatically summarize explanations of program beliefs. These algorithms are the recorded justifications to maintain the consistency and well founded basis of the set of beliefs. The set of beliefs can be efficiently updated in an incremental manner when hypotheses are retracted and when new information is discovered. The recorded justifications also enable the pinpointing of exactly whose assumptions which support any particular belief. The ability to pinpoint the underlying assumptions is the basis for an extremely powerful domain-independent backtracking method. This method, called Dependency-Directed Backtracking, offers vastly improved performance over traditional backtracking algorithms.

Long-term changes in physical activity following a one-year home-based physical activity counseling program in older adults with multiple morbidities.

This study assessed the sustained effect of a physical activity (PA) counseling intervention on PA one year after intervention, predictors of sustained PA participation, and three classes of post-intervention PA trajectories (improvers, maintainers, and decliners) in 238 older Veterans. Declines in minutes of PA from 12 to 24 months were observed for both the treatment and control arms of the study. PA at 12 months was the strongest predictor of post-intervention changes in PA. To our surprise, those who took up the intervention and increased PA levels the most, had significant declines in post-intervention PA. Analysis of the three post-intervention PA trajectories demonstrated that the maintenance group actually reflected a group of nonresponders to the intervention who had more comorbidities, lower self-efficacy, and worse physical function than the improvers or decliners. Results suggest that behavioral counseling/support must be ongoing to promote maintenance. Strategies to promote PA appropriately to subgroups of individuals are needed.

Stochastic short-term maintenance scheduling of GENCOs in an oligopolistic electricity market

In the proposed model, the independent system operator (ISO) provides the opportunity for maintenance outage rescheduling of generating units before each short-term (ST) time interval. Long-term (LT) scheduling for 1 or 2 years in advance is essential for the ISO and the generation companies (GENCOs) to decide their LT strategies; however, it is not possible to be exactly followed and requires slight adjustments. The Cournot-Nash equilibrium is used to characterize the decision-making procedure of an individual GENCO for ST intervals considering the effective coordination with LT plans. Random inputs, such as parameters of the demand function of loads, hourly demand during the following ST time interval and the expected generation pattern of the rivals, are included as scenarios in the stochastic mixed integer program defined to model the payoff-maximizing objective of a GENCO. Scenario reduction algorithms are used to deal with the computational burden. Two reliability test systems were chosen to illustrate the effectiveness of the proposed model for the ST decision-making process for future planned outages from the point of view of a GENCO.

Substitution of (R,S)-methadone by (R)-methadone: Impact on QTc interval.

Methadone is administered as a chiral mixture of (R,S)-methadone. The opioid effect is mainly mediated by (R)-methadone, whereas (S)-methadone blocks the human ether-à-go-go-related gene (hERG) voltage-gated potassium channel more potently, which can cause drug-induced long QT syndrome, leading to potentially lethal ventricular tachyarrhythmias. To investigate whether substitution of (R,S)-methadone by (R)-methadone could reduce the corrected QT (QTc) interval, (R,S)-methadone was replaced by (R)-methadone (half-dose) in 39 opioid-dependent patients receiving maintenance treatment for 14 days. (R)-methadone was then replaced by the initial dose of (R,S)-methadone for 14 days (n = 29). Trough (R)-methadone and (S)-methadone plasma levels and electrocardiogram measurements were taken. The Fridericia-corrected QT (QTcF) interval decreased when (R,S)-methadone was replaced by a half-dose of (R)-methadone; the median (interquartile range [IQR]) values were 423 (398-440) milliseconds (ms) and 412 (395-431) ms (P = .06) at days 0 and 14, respectively. Using a univariate mixed-effect linear model, the QTcF value decreased by a mean of -3.9 ms (95% confidence interval [CI], -7.7 to -0.2) per week (P = .04). The QTcF value increased when (R)-methadone was replaced by the initial dose of (R,S)-methadone for 14 days; median (IQR) values were 424 (398-436) ms and 424 (412-443) ms (P = .01) at days 14 and 28, respectively. The univariate model showed that the QTcF value increased by a mean of 4.7 ms (95% CI, 1.3-8.1) per week (P = .006). Substitution of (R,S)-methadone by (R)-methadone reduces the QTc interval value. A safer cardiac profile of (R)-methadone is in agreement with previous in vitro and pharmacogenetic studies. If the present results are confirmed by larger studies, (R)-methadone should be prescribed instead of (R,S)-methadone to reduce the risk of cardiac toxic effects and sudden death.

Examining the role of goals and motives for physical activity and eating behaviour in commercial weight-loss program participants

Background: The purpose of this study was to examine the relationships between physical activity and healthy eating behaviour with the participant's motives and goals for each health behaviour. Methods: Participants (N 121; 93.2% female) enrolled in commercial weightloss programs at the time of data collection, completed self-reported instruments using a web-based interface that were in accordance with Deci and Ryan's (2002) Self-Determination Theory (SDT). Results: Multiple linear regression models revealed that motivation and goals collectively accounted for between 0.21 to 0.29 percent and 0.03 to 0.16 percent of the variance in physical and healthy eating behaviours in this sample. In general, goals regarding either behaviour did not appear to have strong predictive relationships with each health behaviour beyond the contributions of motives. Discussion: Overall, findings from this study suggest that motives seem to mattermore than goals for both physical activity and healthy eating behaviour in clientele of commercial weight-loss programs. Therefore commercial weight-loss program implementers may want to consider placing more attention on motives I than goals for their clientele when designing weight-loss and weight-maintenance initiatives.

Lighting recommendations for the Ryan Electric Scintillator and Fireworks Program for the official dedication Niagara Falls illumination, 1925

Walter D’Arcy Ryan was born in 1870 in Kentville, Nova Scotia. He became the chief of the department of illumination at the General Electric Company of Schenectady, New York. He was a founder in the field of electrical illumination. He built the electric steam scintillator which had numerous nozzles and valves. The operator would release steam through the valves. The nozzles all had names which included: Niagara, fan, snake, plume, column, pinwheel and sunburst. The steam scintillator was combined with projectors, prismatic reflectors, flashers and filters to produce the desired effects. In 1920 a group of businessmen from Niagara Falls, New York formed a group who called themselves the “generators’. They lobbied the American and Canadian governments to improve the illumination of the Falls. They were able to raise $58, 000 for the purchase and installation of 24 arc lights to illuminate the Falls. On February 24th, 1925 the Niagara Falls Illumination Board was formed. Initially, the board had a budget of $28,000 for management, operation and maintenance of the lights. The power was supplied free by the Ontario Power Company. They had 24 lights installed in a row on the Ontario Power Company surge tank which was next to the Refectory in Victoria Park on the Canadian side. The official opening ceremony took place on June 8th, 1925 and included a light parade in Niagara Falls, New York and an international ceremony held in the middle of the Upper Steel Arch Bridge. Walter D’Arcy Ryan was the illuminating engineer and A.D. Dickerson who was his New York field assistant directed the scintillator. with information from American Technological Sublime by David E. Nye and the Niagara Falls info website Location: Brock University Archives Source Information: Subject Headings: Added Entries: 100 Ryan, W. D’A. |q (Walter D’Arcy), |d 1870-1934 610 General Electric Company 650 Lighting, Architectural and decorative 650 Lighting |z New York (State) |z Niagara Falls 700 Dickerson, A.F. 700 Schaffer, J.W. Related material held at other repositories: The Niagara Falls Museum in Niagara Falls, Ontario has a program (pamphlet) dedicating new lighting in 1958 and it has postcards depicting the illumination of the Falls. Some of Ryan’s accomplishments can be seen at The Virtual Museum of the City of San Francisco. Described by: Anne Adams Date: Sept 26,Upper Steel Arch Bridge. Walter D’Arcy Ryan was the illuminating engineer and A.D. Dickerson who was his New York field assistant directed the scintillator. with information from American Technological Sublime by David E. Nye and the Niagara Falls info website

Self-Esteem and Mastery in Maintenance Cardiac Rehabilitation

Background: CVD is the second leading cause of death in Canada. Mastery and self-esteem are psychosocial factors, suggested to be emerging risk factors for CVD. Purpose: The purpose of the study was two-fold; first to establish whether mastery and self-esteem predicted adherence to maintenance CR; and second, whether mastery and self-esteem improved after a 6-month maintenance CR program. Methods: Data were collected at the Brock University Heart Institute. The study involved a sample of 98 participants. At intake to the program and 6-month follow-up, participants completed a questionnaire battery which included the Rosenberg Self-Esteem Scale and the Pearlin-Schooler Mastery Scale. Results: Mastery and self-esteem scores did not alter the likelihood of adherence to the CR program. Mastery and self-esteem did significantly improve after 6-months of CR amongst participants with the lowest exercise capacity. Conclusion: Maintenance CR does improve mastery and self-esteem amongst those with diminished exercise capacity.

An empirical study of the impact of two antipatterns on program comprehension

Les antipatrons sont de “mauvaises” solutions à des problèmes récurrents de conception logicielle. Leur apparition est soit due à de mauvais choix lors de la phase de conception soit à des altérations et des changements continus durant l’implantation des programmes. Dans la littérature, il est généralement admis que les antipatrons rendent la compréhension des programmes plus difficile. Cependant, peu d’études empiriques ont été menées pour vérifier l’impact des antipatrons sur la compréhension. Dans le cadre de ce travail de maîtrise, nous avons conçu et mené trois expériences, avec 24 sujets chacune, dans le but de recueillir des données sur la performance des sujets lors de tâches de compréhension et d’évaluer l’impact de l’existence de deux antipatrons, Blob et Spaghetti Code, et de leurs combinaisons sur la compréhension des programmes. Nous avons mesuré les performances des sujets en terme : (1) du TLX (NASA task load index) pour l’éffort ; (2) du temps consacré à l’exécution des tâches ; et, (3) de leurs pourcentages de réponses correctes. Les données recueillies montrent que la présence d’un antipatron ne diminue pas sensiblement la performance des sujets alors que la combinaison de deux antipatrons les entrave de façon significative. Nous concluons que les développeurs peuvent faire face à un seul antipatron, alors que la combinaison de plusieurs antipatrons devrait être évitée, éventuellement par le biais de détection et de réusinage.

Code clones in program test sequence identification

Code clones are portions of source code which are similar to the original program code. The presence of code clones is considered as a bad feature of software as the maintenance of software becomes difficult due to the presence of code clones. Methods for code clone detection have gained immense significance in the last few years as they play a significant role in engineering applications such as analysis of program code, program understanding, plagiarism detection, error detection, code compaction and many more similar tasks. Despite of all these facts, several features of code clones if properly utilized can make software development process easier. In this work, we have pointed out such a feature of code clones which highlight the relevance of code clones in test sequence identification. Here program slicing is used in code clone detection. In addition, a classification of code clones is presented and the benefit of using program slicing in code clone detection is also mentioned in this work.

On-the-Fly Maintenance of Series-Parallel Relationships in Fork-Join Multithreaded Programs

A key capability of data-race detectors is to determine whether one thread executes logically in parallel with another or whether the threads must operate in series. This paper provides two algorithms, one serial and one parallel, to maintain series-parallel (SP) relationships "on the fly" for fork-join multithreaded programs. The serial SP-order algorithm runs in O(1) amortized time per operation. In contrast, the previously best algorithm requires a time per operation that is proportional to Tarjan’s functional inverse of Ackermann’s function. SP-order employs an order-maintenance data structure that allows us to implement a more efficient "English-Hebrew" labeling scheme than was used in earlier race detectors, which immediately yields an improved determinacy-race detector. In particular, any fork-join program running in T₁ time on a single processor can be checked on the fly for determinacy races in O(T₁) time. Corresponding improved bounds can also be obtained for more sophisticated data-race detectors, for example, those that use locks. By combining SP-order with Feng and Leiserson’s serial SP-bags algorithm, we obtain a parallel SP-maintenance algorithm, called SP-hybrid. Suppose that a fork-join program has n threads, T₁ work, and a critical-path length of T[subscript ∞]. When executed on P processors, we prove that SP-hybrid runs in O((T₁/P + PT[subscript ∞]) lg n) expected time. To understand this bound, consider that the original program obtains linear speed-up over a 1-processor execution when P = O(T₁/T[subscript ∞]). In contrast, SP-hybrid obtains linear speed-up when P = O(√T₁/T[subscript ∞]), but the work is increased by a factor of O(lg n).