Heat Release, Time Required, and Cleaning Ability of Mtwo R and ProTaper Universal Retreatment Systems in the Removal of Filling Material

Introduction: This ex vivo study evaluated the heat release, time required, and cleaning efficacy of MTwo (VDW, Munich, Germany) and ProTaper Universal Retreatment systems (Dentsply/Maillefer, Ballaigues, Switzerland) and hand instrumentation in the removal of filling material. Methods: Sixty single-rooted human teeth with a single straight canal were obturated with gutta-percha and zinc oxide and eugenol-based cement and randomly allocated to 3 groups (n = 20). After 30-day storage at 37 degrees C and 100% humidity, the root fillings were removed using ProTaper UR, MTwo R, or hand files. Heat release, time required, and cleaning efficacy data were analyzed statistically (analysis of variance and the Tukey test, alpha = 0.05). Results: None of the techniques removed the root fillings completely. Filling material removal with ProTaper UR was faster but caused more heat release. Mtwo R produced less heat release than the other techniques but was the least efficient in removing gutta-percha/sealer. Conclusions: ProTaper UR and MTwo R caused the greatest and lowest temperature increase on root surface, respectively; regardless of the type of instrument, more heat was released in the cervical third. Pro Taper UR needed less time to remove fillings than MTwo R. All techniques left filling debris in the root canals. (I Endod 2010;36:1870-1873)

Chronic maxillary sinusitis associated with dental impression material

A 62-year-old man was referred for routine treatment of hyperplasia of the mucosa in the anterior lower jaw. An oroantral fistula was detected in the right superior alveolar ridge. The patient had no complaints. Plain radiographs showed a radiopaque foreign body in the posterior region associated with opacification of the maxillary sinus. Computed tomography showed the same hyperdense foreign body located in the posterior lower part of the sinus and an abnormal soft tissue mass in the entire right maxillary sinus. When asked about sinusitis, the patient mentioned occasional episodes of pus taste and intermittent crises of headache lasting for one week. The patient has been edentulous for 20 years. Sinus debridement was performed and the oroantral fistula was closed. The clinical suspicion of the presence of zinc oxide-eugenol paste was confirmed by microscopical and chemical analysis. After 6 months of follow-up, the fistula continued to be closed and sinusitis did not recur. This clinical case of maxillary chronic sinusitis illustrates a different odontogenic origin.

Briefing: Factored material properties and limit state loads-unlikely extreme or impossible pretense

In the limit state design (LSD) method each design criterion is formally stated and assessed using a performance function. The performance function defines the relationship between the design parameters and the design criterion. In practice, LSD involves factoring up loads and factoring down calculated strengths and material parameters. This provides a convenient way to carry out routine probabilistic-based design. The factors are statistically calculated to produce a design with an acceptably low probability of failure. Hence the ultimate load and the design material properties are mathematical concepts that have no physical interpretation. They may be physically impossible. Similarly, the appropriate analysis model is also defined by the performance function and may not describe the real behaviour at the perceived physical equivalent limit condition. These points must be understood to avoid confusion in the discussion and application of partial factor LSD methods.

Beneficial effects of air inclusions on the performance of ethylene vinyl acetate (EVA) mouthguard material

Objective: To investigate the impact characteristics of an ethylene vinyl acetate (EVA) mouthguard material with regulated air inclusions, which included various air cell volumes and wall thickness between air cells. In particular, the aim was to identify the magnitude and direction of forces within the impacts. Method: EVA mouthguard material, A mm thick and with and without air inclusions, was impacted with a constant force impact pendulum with an energy of 4.4 J and a velocity of 3 m/s. Transmitted forces through the EVA material were measured using an accelerometer, which also allowed the determination of force direction and magnitude within the impacts. Results: Statistically significant reductions in the transmitted forces were observed with all the air inclusion materials when compared with EVA without air inclusions. Maximum transmitted force through one air inclusion material was reduced by 32%. Force rebound was eliminated in one material, and reduced second force impulses were observed in all the air inclusion materials. Conclusion: The regulated air inclusions improved the impact characteristics of the EVA mouthguard material, the material most commonly used in mouthguards world wide.

Effect of ethylene vinyl acetate (EVA) closed cell foam on transmitted forces in mouthguard material

Objectives: To compare transmitted forces through ethylene vinyl acetate (EVA) mouthguard material and the same EVA material with gas inclusions in the form of a closed cell foam. Method: EVA mouthguard materials with and without foam gas inclusions and 4 mm thick were impacted with a constant force from an impact pendulum. Various porosity levels in the foam materials were produced by 1%, 5%, and 10% by weight foaming agent. The forces transmitted through the EVA after energy absorption by the test materials were measured with a force sensor and compared. Results: Only minor non-significant differences in transmitted forces through the EVA with and without foam were shown. Conclusions: The inclusion of gas in the form of a closed cell foam in 4 mm thick EVA mouthguard materials did not improve the impact performance of the EVA mouthguard material.

A design method for superconducting MRI magnets with ferromagnetic material

The emphasis of this work is on the optimal design of MRI magnets with both superconducting coils and ferromagnetic rings. The work is directed to the automated design of MRI magnet systems containing superconducting wire and both `cold' and `warm' iron. Details of the optimization procedure are given and the results show combined superconducting and iron material MRI magnets with excellent field characteristics. Strong, homogeneous central magnetic fields are produced with little stray or external field leakage. The field calculations are performed using a semi-analytical method for both current coil and iron material sources. Design examples for symmetric, open and asymmetric clinical MRI magnets containing both superconducting coils and ferromagnetic material are presented.

Rapid field calculations for the effect of ferromagnetic material in MRI magnet design

Magnetic resonance imaging (MRI) magnets have very stringent constraints on the homogeneity of the static magnetic field that they generate over desired imaging regions. The magnet system also preferably generates very little stray field external to its structure, so that ease of siting and safety are assured. This work concentrates on deriving, means of rapidly computing the effect of 'cold' and 'warm' ferromagnetic material in or around the superconducting magnet system, so as to facilitate the automated design of hybrid material MR magnets. A complete scheme for the direct calculation of the spherical harmonics of the magnetic field generated by a circular ring of ferromagnetic material is derived under the conditions of arbitrary external magnetizing fields. The magnetic field produced by the superconducting coils in the system is computed using previously developed methods. The final, hybrid algorithm is fast enough for use in large-scale optimization methods. The resultant fields from a practical example of a 4 T, clinical MRI magnet containing both superconducting coils and magnetic material are presented.

Caixas receptoras de correspond??ncias confeccionadas com material recicl??vel

Os Correios t??m como miss??o facilitar as rela????es pessoais e empresariais mediante a oferta de servi??os de correios com ??tica, competitividade, lucratividade e responsabilidade social. Fundamentada em objetivos estrat??gicos, como o de obter padr??es de qualidade e produtividade requeridos pelas partes interessadas e aumentar a percep????o da sociedade em rela????o ?? atua????o da ECT como empresa socialmente respons??vel, a Ag??ncia de Conchas/DR/SPI implantou a????o socioambiental e educacional com a comunidade: a instala????o de caixas receptoras de correspond??ncia em suas resid??ncias, utilizando materiais recicl??veis. O projeto proporcionou ganhos significativos para a Ag??ncia e para os mun??cipes na presta????o de um servi??o com maior qualidade e agilidade a partir da melhoria gradativa das condi????es de entrega nos novos bairros atendidos pelo servi??o, al??m da satisfa????o e do reconhecimento da sociedade com a a????o de inclus??o social

Curso de administra????o de material

O material abrange os seguintes t??picos: t??cnicas modernas de administra????o de materiais;estrutura; funcionamento e desenvolvimento do organismo de material da Administra????o P??blica Federal

Mesa-redonda de pesquisa-a????o em gest??o por compet??ncias: material do participante

A Escola Nacional de Administra????o P??blica, ENAP, em parceria com a Canada School of Public Service, CSPS, vem implementando novas metodologias de abordagem de temas importantes para a melhoria da administra????o p??blica. Em 09 de novembro de 2004 foi instalada a primeira Mesa-redonda de Pesquisa-A????o, ferramenta de pesquisa que tem por objetivo reunir profissionais e especialistas para encontrar solu????es para os desafios enfrentados no servi??o p??blico. O resultado dos debates ?? a publica????o de um material que possa ser ??til a servidores e dirigentes no desempenho de tarefas ou na implementa????o de novas ferramentas de trabalho. A ENAP, cumprindo seu papel de auxiliar na difus??o de conhecimentos no setor p??blico federal, pretende realizar novas mesas periodicamente.

Mesa-redonda de pesquisa-a????o em educa????o a dist??ncia: material do participante

A Escola Nacional de Administra????o P??blica, ENAP, em parceria com a Canada School of Public Service, CSPS, vem implementando novas metodologias de abordagem de temas importantes para a melhoria da administra????o p??blica. Em 09 de novembro de 2004 foi instalada a primeira Mesa-redonda de Pesquisa-A????o, ferramenta de pesquisa que tem por objetivo reunir profissionais e especialistas para encontrar solu????es para os desafios enfrentados no servi??o p??blico. O resultado dos debates ?? a publica????o de um material que possa ser ??til a servidores e dirigentes no desempenho de tarefas ou na implementa????o de novas ferramentas de trabalho. A ENAP, cumprindo seu papel de auxiliar na difus??o de conhecimentos no setor p??blico federal, pretende realizar novas mesas periodicamente.

Complicações extralaríngeas das cirurgias por laringoscopia direta de suspensão

Apesar do uso rotineiro da laringoscopia de suspensão (LS) na microcirurgia de laringe, poucos são os estudos na literatura que tratam das complicações deste procedimento. OBJETIVO: Avaliar as complicações extralaríngeas após a laringoscopia de suspensão e relacioná-las com o tempo de cirurgia. MATERIAL E MÉTODO: Trinta e sete procedimentos consecutivos foram analisados prospectivamente enfocando as lesões relacionadas à LS. A pesquisa incluiu análise pré e pós-operatória dos pacientes quanto aos critérios estudados. RESULTADO: O tempo cirúrgico foi menor de trinta minutos em quatorze casos, entre trinta e sessenta minutos em dezesseis casos e maior de uma hora em sete casos. Vinte e sete apresentaram lesão relacionada à LS, sendo mais comuns as lesões da mucosa oral. Lesão temporária dos nervos foi encontrada em cinco casos, e trauma dentário em um caso. Houve relação estatística entre o tempo de cirurgia e o índice de lesões de mucosa oral menores de 1 centímetro, confirmando que procedimentos mais longos apresentam maior risco para esta complicação. CONCLUSÃO: Esses achados demonstram que a LS não é um procedimento inócuo, produzindo complicações freqüentes. Ainda que não representem grande morbidade aos pacientes, tais danos são evitáveis desde que técnicas mais apuradas sejam utilizadas.

Integrating environmental and economic life cycle analysis in product development: a material selection case study

Purpose Achieving sustainability by rethinking products, services and strategies is an enormous challenge currently laid upon the economic sector, in which materials selection plays a critical role. In this context, the present work describes an environmental and economic life cycle analysis of a structural product, comparing two possible material alternatives. The product chosen is a storage tank, presently manufactured in stainless steel (SST) or in a glass fibre reinforced polymer composite (CST). The overall goal of the study is to identify environmental and economic strong and weak points related to the life cycle of the two material alternatives. The consequential win-win or trade-off situations will be identified via a Life Cycle Assessment/Life Cycle Costing (LCA/LCC) integrated model. Methods The LCA/LCC integrated model used consists in applying the LCA methodology to the product system, incorporating, in parallel, its results into the LCC study, namely those of the Life Cycle Inventory (LCI) and the Life Cycle Impact Assessment (LCIA). Results In both the SST and CST systems the most significant life cycle phase is the raw materials production, in which the most significant environmental burdens correspond to the Fossil fuels and Respiratory inorganics categories. The LCA/LCC integrated analysis shows that the CST has globally a preferable environmental and economic profile, as its impacts are lower than those of the SST in all life cycle stages. Both the internal and external costs are lower, the former resulting mainly from the composite material being significantly less expensive than stainless steel. This therefore represents a full win-win situation. As a consequence, the study clearly indicates that using a thermoset composite material to manufacture storage tanks is environmentally and economically desirable. However, it was also evident that the environmental performance of the CST could be improved by altering its End-of-Life stage. Conclusions The results of the present work provide enlightening insights into the synergies between the environmental and the economic performance of a structural product made with alternative materials. Further, they provide conclusive evidence to support the integration of environmental and economic life cycle analysis in the product development processes of a manufacturing company, or in some cases even in its procurement practices.