Purification and Characterization of the alpha-Glucosidase Produced by Thermophilic Fungus Thermoascus aurantiacus CBMAI 756

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quartz Crystal Microbalance monitoring the real-time binding of lectin with carbohydrate with high and low molecular mass

Quartz Crystal Microbalance (QCM) was used to monitor the mass changes on a quartz crystal surface containing immobilized lectins that interacted with carbohydrates. The strategy for lectin immobilization was developed on the basis of a multilayer system composed of Au-cystamine-glutaraldehyde-lectin. Each step of the immobilization procedure was confirmed by FTIR analysis. The system was used to study the interactions of Concanavalin A (ConA) with maltose and Jacalin with Fetuin. The real-time binding of different concentrations of carbohydrate to the immobilized lectin was monitored by means of QCM measurements and the data obtained allowed for the construction of Langmuir isotherm curves. The association constants determined for the specific interactions analyzed here were (6.4 +/- 0.2) X 10(4) M-1 for Jacalin-Fetuin and (4.5 +/- 0.1) x 10(2) M-1 for ConA-maltose. These results indicate that the QCM constitutes a suitable method for the analysis of lectin-carbohydrate interactions, even when assaying low molecular mass ligands such as disaccharides. Published by Elsevier B.V.

Avaliação da farinha de mandioca e do fubá de milho como substratos para a obtenção de bebida fermento-destilada

A farinha de mandioca e o fubá de milho foram avaliados como matérias-primas alternativas na obtenção de uma bebida fermento-destilada, visando gerar informações úteis à aplicação industrial. Os substratos foram caracterizados e comparou-se a eficiência da mosturação, o perfil de açúcares no mosto, bem como as curvas de fermentação dos substratos. Os resultados demonstraram que o conteúdo de amido foi de 78,1 % para o fubá de milho e 92,7 % para a farinha de mandioca. Quanto ao rendimento da mosturação foi de 57, 4 % para o milho e 66,4 % para a mandioca, sendo que o perfil de açúcares no mosto demonstrou que 95 % dos açúcares presentes no mosto de mandioca foi glicose e o restante pequenas porcentagens de dextrinas e maltose. Já o perfil do mosto de milho apresentou cerca de 85 % de glicose , 10 % de dextrinas e cerca de 4 % de maltose. Para o processo fermentativo, observou -se que o consumo de açúcares no mosto de mandioca foi mais rápido que no mosto de milho.

HIDROLISADO DE FÉCULA DE MANDIOCA COMO ADJUNTO DE MALTE NA FABRICAÇÃO DE CERVEJA: AVALIAÇÃO QUÍMICA E SENSORIAL

Em virtude da progressiva substituição dos adjuntos amiláceos pelos xaropes com alta concentração de maltose nas cervejarias brasileiras, o presente trabalho teve por objetivo comparar hidrolisados de milho e de mandioca, como adjunto de malte, na fabricação de cerveja tipo Pilsen, em escala de laboratório. Os hidrolisados foram produzidos a partir de amido de milho e fécula de mandioca, sendo que na liqüefação e sacarificação da fração amilácea destes produtos foram utilizadas, respectivamente, as enzimas comerciais Termamil (alfa amilase bacteriana) e Fungamil (alfa amilase fúngica). Na fabricação das cervejas, a proporção de malte e hidrolisado foi de 2 para 1, na base do extrato. O mosto foi produzido pelo processo de infusão e após resfriamento e clarificação foi inoculado com levedura cervejeira de baixa fermentação. A fermentação transcorreu a 10 °C até 90% de atenuação do extrato aparente fermentável. As cervejas foram engarrafadas e, em seguida, maturadas a 0 °C, por 14 dias. Terminado o processo de fabricação, as cervejas foram analisadas química e sensorialmente. A semelhança na composição química dos hidrolisados de milho e de mandioca refletiu na composição química dos mostos e das cervejas. Não houve diferença estatística entre os mostos e entre as cervejas testadas para todos os parâmetros químicos analisados. Também, não existiu diferença sensorial entre as cervejas produzidas com hidrolisado de milho e hidrolisado de mandioca. Concluiu-se que a fécula de mandioca apresenta potencial de uso como matéria prima para a fabricação de xarope de maltose de uso cervejeiro e que há elevada probabilidade de sucesso no uso desse xarope para a fabricação de cervejas.

Aproveitamento da água de umidificação de malte da moagem úmida como matéria prima na fabricação de cerveja

A água de umidificação de malte, resultante da moagem úmida, pode ser usada como matéria prima na fabricação de cerveja. Há, entretanto, cervejarias que descartam esse subproduto, e conseqüentemente, o extrato nele contido. em função disso, o presente trabalho teve por objetivo avaliar a possibilidade de ganho de rendimento na mosturação e alterações nas características químicas e sensoriais da bebida, em virtude do uso dessa água. Cervejas do tipo Pilsen foram produzidas de duas formas: com e sem água de umidificação de malte. Utilizou-se como matéria prima malte, lúpulo, xarope de maltose, água destilada e água de umidificação de malte. O mosto foi produzido pelo processo de infusão, separado do bagaço de malte por filtração convencional e fervido durante 60 minutos. Após seu resfriamento e clarificação o mosto foi inoculado com levedura de baixa fermentação (1,3g/l, ps) e colocado para fermentar a 10°C. A fermentação foi encerrada com 90% da atenuação limite. em seguida, a cerveja foi engarrafada e maturada a 0°C por 14 dias. Os resultados mostraram que o aumento do rendimento de mosturação, em função do uso da água de umidificação de malte, foi estatisticamente não significativo. A utilização dessa água praticamente não alterou as características químicas e sensoriais da cerveja, havendo apenas um leve aumento na intensidade de cor da bebida (7,1 x 8,0 EBC). Considerando, no entanto, que a água de umidificação de malte obtida em nível industrial apresenta maior concentração de extrato em relação àquela produzida em laboratório, espera-se que o uso da primeira traga ganho de rendimento industrial sem alterações significativas nas características da cerveja.

Production of volatile compounds by Geotrichum fragrans using cassava wastewater as substrate

The cassava processing industry generates wastewater named manipueira with a high organic content. Although considered a pollutant, manipueira can be used as substrate for fermentative processes including the cultivation of Geotrichum fragrans. This aerobic microorganism isolated from cassava wastewater has cyanide resistant respiration. Under cassava wastewater cultivation, G. fragrans produced fruit aroma volatile compounds. This study evaluated volatile compounds produced by G. fragrans in cassava liquid waste. The waste had a sugar composition composed of dextrin (2.6%), maltose (1.4%), sucrose (32.1%), glucose (38.3%), and fructose (25.6%). The average value of total sugars was 58.2 g l(-1), composed of 38.0 g l(-1) reducing and 20.2 g l(-1) non-reducing sugars. The chemical oxygen demand (COD) average value was 60 000 mg l(-1). G. fragrans used sugars (fructose and glucose) for energy generation reducing the COD value of the cassava wastewater by 40%. Biomass production of G. fragrans cultivated for 12 h in natural cassava liquid waste was 12.8 g l(-)1. The volatile compounds identified in the cassava liquid waste after 72 h cultivation were: 1-butanol, 3-methyl 1-butanol (isoamylic alcohol), 2-methyl 1-butanol, 1-3 butanodiol and phenylethanol; ethyl acetate, ethyl propionate, 2-methyl ethyl propionate and 2-methyl propanoic. The effect of substrate supplementation with glucose (50 g l(-1)), fructose (50 g l(-1)) and aqueous yeast extract (200 ml l(-1)) did not affect the qualitative and quantitative profiles of volatile compounds. These results indicate that the carbon (C) source utilized by microorganism was glucose or fructose, while nitrogen (N) supplementation was not necessary because the agent did not exhaust all the nitrogen of the wastewater. (C) 2003 Elsevier B.V. Ltd. All rights reserved.

Effect of sugar catabolite repression in correlation with the structural complexity of the nitrogen source on yeast growth and fermentation

Biomass and ethanol production by industrial Saccharomyces cerevisiae strains were strongly affected by the structural complexity of the nitrogen source during fermentation in media containing galactose, and supplemented with a nitrogen source varying from a single ammonium salt (ammonium sulfate) to free amino acids (casamino acids) and peptides (peptone). Diauxie was observed at low galactose concentrations independent of nitrogen supplementation. At high sugar concentrations altered patterns of galactose utilisation were observed. Biomass accumulation and ethanol production depended on the nature of the nitrogen source and were different for baking and brewing ale and lager strains. Baking yeast showed improved galactose fermentation performance in the medium supplemented with casamino acids. High biomass production was observed with peptone and casamino acids for the ale brewing strain, however high ethanol production was observed only in the presence of casamino acids. Conversely, peptone was the nitrogen supplement that induced higher biomass and ethanol production for the lager brewing strain. Ammonium salts always induced poor yeast performance. The results with galactose differed from those obtained with glucose and maltose which indicated that supplementation with a nitrogen source in the peptide form (peptone) was more positive for yeast metabolism, suggesting that sugar catabolite repression has a central role in yeast performance in a medium containing nitrogen sources with differing levels of structural complexity.

Relationship between carbon source, production and pattern action of alpha-amilase from Rhizopus sp

This paper discusses the inducer effect of corn soluble starch and the individual components (amylose and amylopectin) from corn and potatoes starch for alpha-amylase production by a strain of Rhizopus sp. The following decreasing order in the enzyme production was obtained: corn amylose > potatoes amylose > corn amylopectin > potatoes amylopectin > starch > maltose, coinciding with the ability of the enzyme to release reducing units, except the soluble starch that was more softly hydrolysed. However, when the enzyme action was measured by the iodine binding method, an inverse order of enzyme activity was obtained, that is: amylopectins > starch > amylosis. The results suggest that: a) branched structures in substrate affect the enzyme production; b) corn amylose and corn amylopectin are better inducers than their respectives homologous from potatoes; c) cc-amylase from Rhizopus sp has different action patterns on substrates with straight or branched chains: from the former, it removes only reducing units with lower molecular weight (G1-G3); from the latter it also removes oligosaccharides with higher molecular weight (G5-G6).

Structural complexity of the nitrogen source and influence on yeast growth and fermentation

The structural complexity of the nitrogen source strongly affects both biomass and ethanol production by industrial strains of Saccharomyces cerevisiae, during fermentation in media containing glucose or maltose, and supplemented with a nitrogen source varying from a single ammonium salt (ammonium sulfate) to free amino acids (casamino acids) and peptides (peptone). Diauxie was observed at low glucose and maltose concentrations independent of nitrogen supplementation. At high sugar concentrations diauxie was not easily observed. and growth and ethanol production depended on the nature of the nitrogen source. This was different for baking and brewing ale and lager yeast strains. Sugar concentration had a strong effect on the shift from oxido-fermentative to oxidative metabolism. At low sugar concentrations, biomass production was similar under both peptone and casamino acid supplementation. Under casamino acid supplementation, the time for metabolic shift increased with the glucose concentration, together with a decrease in the biomass production. This drastic effect on glucose fermentation resulted in the extinction of the second growth phase, probably due to the loss of cell viability. Ammonium salts always induced poor yeast performance. In general, supplementation with a nitrogen source in the peptide form (peptone) was more positive for yeast metabolism, inducing higher biomass and ethanol production, and preserving yeast viability, in both glucose and maltose media, for baking and brewing ale and lager yeast strains. Determination of amino acid utilization showed that most free and peptide amino acids present, in peptone and casamino acids, were utilized by the yeast, suggesting that the results described in this work were not due to a nutritional status induced by nitrogen limitation.

Soluble phosphate accumulation by Aspergillus niger from fluorapatite

In order to determine conditions that may provide greater solubilization of insouluble phosphate, the fungus Aspergillus niger was grown in a stationary culture containing modified citrate medium supplemented with 800 mg fluorapatite per litre. Solubilization of insouluble phosphate increased with fungal growth, reaching a maximum after 11 days of culture. Soluble phosphate levels were correlated with pH of the culture medium but not with titratable acidity values, probably due to the metabolic activity of the fungus resulting from consumption of sugar in the culture medium. Fructose, glucose, xylose, and sucrose were the carbohydrates that favoured fluorapatite solubilization the most when compared with galactose and maltose. Although increasing fructose concentrations in the culture medium favoured mycelial growth, increased total acidity and a fall in pH, soluble phosphate levels were reduced, probably owing to consumption by the rapidly growing fungus. Among the nitrogen sources tested, ammonium salts favoured the production of larger amounts of soluble phosphate than organic nitrogen (peptone or urea) or nitrate, corresponding to the lowest pH and highest titratable acidity values obtained. © 1988 Springer-Verlag.

Antibiotic 26-deoxylaidlomycin isolated from Streptomyces sp. Ar386 from Brazilian soil

An actinomycete strain (Ar386) was isolated from the soil of the Araraquara regio, SP, Brazil. The strain, named Streptomyces jacareensis, formed irregular rayed, rugose, grayish-white mycelium with sinuous, branched hyphae carrying rare isolated spores; assimilated glucose, galactose, inositol, ribose, maltose, sucrose, melibiose and starch but not mannitol, rhamnose, arabinose, xylose, lactose and raffinose; and contained LL- diaminopimelic acid in its cell wall. An antibiotic active against Gram- positive bacteria, which was characterized as being 26-deoxylaidlomycin and which may have application against poultry coccidiosis, was isolated from cultures of the strain. This was the first isolation of this antibiotic from a microorganism of the genus Streptomyces and also the first isolation of this antibiotic in Brazil.

Control of amylase production and growth characteristics of Aspergillus ochraceus

The growth and the extracellular amylase production by Aspergillus ochraceus were studied in a stationary culture medium. Maximum growth rate of this fungus was found after 5 days of incubation at 30° C, but maximum amylase production was obtained after 2 days. The highest amylase production were attained with lactose, maltose, xylose and starch as carbon sources. The extracellular amylase production and mycelial growth were influenced by the concentration of starch. Other carbohydrates supported growth but did not induce amylase synthesis and glucose repressed it, indicating catabolite repression in this microorganism. The presence of both mechanisms of induction and repression suggests that at least these multiple forms of regulation are present in A. ochraceus. Of the nitrogen sources tested, casaminoacids, ammonium nitrate and sodium nitrate stimulated the highest yield of amylase. Optimal amylase production was obtained at pH 5.0, but enzyme activity was found only in the 4.0-6.0 pH range. These results were probably due to the inhibitory effect of NH 4 +-N in the culture medium.

Production of saccharogenic and dextrinogenic amylases by Rhizomucor pusillus A 13.36

A newly-isolated thermophilic strain of the zygomycete fungus Rhizomucor pusillus 13.36 produced highly active dextrinogenic and saccharogenic enzymes. Cassava pulp was a good alternative substrate for amylase production. Dextrinogenic and saccharogenic amylases exhibited optimum activities at a pH of 4.0-4.5 and 5.0 respectively and at a temperature of 75°C. The enzymes were highly thermostable, with no detectable loss of saccharogenic or dextrinogenic activity after 1 h and 6 h at 60°C, respectively. The saccharogenic activity was inhibited by Ca2+ while the dextrinogenic was indifferent to this ion. Both activities were inhibited by Fe2+ and Cu2+ Hydrolysis of soluble starch by the crude enzyme yielded 66% glucose, 19.5% maltose, 7.7% maltotriose and 6.6% oligosaccharides. Copyright © 2005, The Microbiological Society of Korea.

A specific short dextrin-hydrolyzing extracellular glucosidase from the thermophilic fungus Thermoascus aurantiacus 179-5

The thermophilic fungus Thermoascus aurantiacus 179-5 produced large quantities of a glucosidase which preferentially hydrolyzed maltose over starch. Enzyme production was high in submerged fermentation, with a maximal activity of 30 U/ml after 336 h of fermentation. In solid-state fermentation, the activity of the enzyme was 22 U/ml at 144 h in medium containing wheat bran and 5.8 U/ml at 48 h when cassava pulp was used as the culture medium. The enzyme was specific for maltose, very slowly hydrolyzed starch, dextrins (2-7G) and the synthetic substrate (α-PNPG), and did not hydrolyze sucrose. These properties suggest that the enzyme is a type II α-glucosidase. The optimum temperature of the enzyme was 70°C. In addition, the enzyme was highly thermostable (100% stability for 10 h at 60°C and a half-life of 15 min at 80°C), and stable within a wide pH range. Copyright © 2006, The Microbiological Society of Korea.

Fatty acid production by four strains of Mucor hiemalis grown in plant oil and soluble carbohydrates

Four Mucor hiemalis strains (M1, M2, M3 and M4), isolated from soil at a depth of 0 - 15 cm in the Juréia-Itatins Ecology Station (JIES), in the state of São Paulo, Brazil and were evaluated for the production of γ-linolenic (GLA) and other unsaturated fatty acids. Five growth variables (temperature, pH, carbon source, nitrogen source, and vegetable oils) were studied. Liquid media containing 2% vegetable oil (palm oil, canola oil, soybean oil, sesame oil, or sunflower oil) or 2% carbohydrate (fructose, galactose, glycerol, glucose, lactose, maltose, sucrose, sorbitol or xylose) and 1% yeast extract as a nitrogen source were used. The greatest biomass production was observed with M3 and M4 strains in palm oil (91.5 g l -1) and sunflower oil (68.3 g l -1) media, respectively. Strain M4 produced greater quantities of polyunsaturated acids in medium containing glucose. The GLA production in the M4 biomass was 1,132.2 mg l -1 in glucose medium. Plant oils were inhibitors of fatty acid production by these strains. © 2007 Academic Journals.