Controle automático de adição de AlF3 em cubas de redução de alumínio, usando lógica fuzzy

Este trabalho descreve um sistema de análise de dados com a finalidade de gerar um sistema de controle utilizando técnica inteligente para adição de fluoreto de alumínio (AlF3) em fornos de redução de alumínio. O projeto baseia-se nos conceitos de lógica fuzzy, nos quais o conhecimento acumulado pelo especialista do processo é traduzido de maneira qualitativa em um conjunto de regras linguísticas do tipo SE ENTÃO. A utilização desta técnica inteligente para o controle de adição de fluoreto busca representar explicitamente um conhecimento qualitativo, detido pelos operadores de cubas eletrolíticas. Devido o sistema convencional não contemplar as variações dos fenômenos que envolvem a dinâmica do processo, um controlador fuzzy foi implmentado no sistema real para tomadas de decisões, utilizando o modelo mínimo de Mandani. Baseado neste modelo, as variáveis de processo para a entrada do sistema fuzzy, tais como temperatura de banho e percentual de fluoreto foram manipuladas para estimar a tendência de subida e descida, respectivamente, através do método mínimos quadrados(MMQ). O controlador fuzzy é aplicado para calcular a quantidade de fluoreto de alumínio (AlF3) a ser adicionado na cuba eletrolítica de forma automática sem a necessidade da intervenção do especialista do processo. A motivação para o uso de um sistema de controle fuzzy se deve ao fato de não se ter disponível um modelo dinâmico do processo de adição do fluoreto na cuba eletrolítica. Esta falta de modelagem se deve ao fato de grande complexidade dos fenômenos envolvidos em uma cuba que são processos termodinâmicos e eletromagnéticos acoplados.

Micropartículas lipídicas sólidas obtidas por spray drying para liberação intraocular de ibuprofeno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Euterpe edulis Seedlings in the Understory of Two Forest Fragments

The palm Euterpe edulis is one of the most exploited due the intense illegal extraction, which is very harmful because this species dies right after the cutting process. This study aimed to assess the palms' development as an enrichment plant in a forest fragment belonging to a Preservation Area and the Biosphere Reserve of the Green Belt of Sao Paulo State, in Embu das Artes city. The seeds were obtained from the Instituto Florestal, which follows all the regulations for seeds, in order to get seedlings with a high genetic variation. The seedlings were planted in two successional stages: secondary forest with low trees (SFLT) and secondary forest with medium trees (SFMT). The seedlings survival and growth were periodically assessed and the results were compared by the variance analysis. Both areas presented high rates of survival, which were superior comparing to other similar studies with Euterpe edulis. Despite the successional difference between the areas, the development of the seedlings did not show significant difference on the analysis of variance regarding leaf number, height growth, stem diameter and survival, except for plant height at 60 days after planting, when seedlings planted in SFLT reached higher height (21.38 cm) than when planted in SFMT (19.31 cm).

Maturity, Pulp Removal and Storage Effects on the Germination of Livistona rotundifolia Seeds

The Livistona rotundifolia species is native to Oceania, and has a high potential for landscaping use and as a pot plant. This work aimed to study the effects of the maturation stage, pulp removal and storage on the germination of L. rotundifolia seeds. The experimental design was entirely randomized in a factorial arrangement 5x2x2 (five storage periods: 15, 30, 45, 60 and 75 days; two maturation stages: green and ripe; and the presence or absence of the pulp - exocarp and mesocarp) with four replications of 25 seeds each. After sorting out the fruits by the maturity stage and removing the pulp out of half of the fruits from each plot, the seeds were placed in closed bottles, which were sealed and stored in a cold chamber at 10 degrees C. The seeds were removed from the cold chamber and left to germinate in plastic boxes (gerbox type) with sphagnum. The boxes were kept at 25-35 degrees C and photoperiod of 12 hours. The germination rate was determined when seed germination was steady. The highest germination rate was found when green fruits had their pulp removed. The germination rate gradually decreased with the increase of the storage period regardless the maturation stage and the presence or absence of the pulp.

Effects of the Temperature and Maturation Stages on the Germination of Roystonea regia Seeds

Roystonea regia (Kunth) O.F. Cook is largely used as ornamental. The propagation is done almost exclusively by seeds; however, there is a great variation in the germination process influenced by many factors. The objective of this work was to study the effects of the temperature and maturation stages on the germination of R. regia seeds. The experimental design was entirely randomized in a factorial arrangement 6x3 (six temperatures: constant at 20, 25, 30 and 35 degrees C and alternated at 20-30 and 25-35 degrees C, with a photoperiod of 12 hours; and three fruit maturation stages: brown, yellow and black), with four replications of 25 disseminules (seed with stucked endocarp) each. The disseminules had their mesocarp and exocarp were removed and shade dried. Their moisture content was determined, and then they were placed in plastic boxes (gerbox type) containing vermiculite. The disseminules, with the germinative intumescence, were daily noted until germination was steady. The germination rate and the germination speed index were calculated, and the data were submitted to the variance analysis. The means were compared by the Tukey test. It was concluded that the highest germination rate (99.7%) and germination speed were obtained by seeds from mature (black) fruits at the temperature of 35 degrees C.

Germination of Roystonea borinquena OF Cook (Arecaceae) Seeds

This work aimed to study the effect of the temperature on the seed germination and to describe the morphology and germination process of disseminules (seeds with stucked endocarp) of R. borinquena species. The fruits were harvested and had their pulp (exocarp and mesocarp) removed and the disseminules were shade dried. The experimental design was entirely randomized and six treatments were performed (temperature conditions: constant at 25, 30 and 35 degrees C; alternated at 25-35 and 20-30 degrees C; and room temperature) with four replications with 25 disseminules per plot, placed in plastic boxes (gerbox) containing vermiculite. The germination rate and germination speed index were calculated, and the data were submitted to the variance analysis, and the means compared by the Tukey test. For the morphological studies, the external and internal sides of the disseminules, the embryo and the representative germination stages were sketched. The samples were fixed in FAA (formalin - acetic acid - ethyl alcohol). It was concluded that the highest germination rate and faster germination were at the constant temperature of 35 degrees C and alternated of 25-35 degrees C. The seeds are albuminous, with a hard endosperm that takes almost the entire interior of the disseminules; the embryo is lateral, peripheral and poorly differentiated; the germination is adjacent.

The Palm Collection of UNESP/FCAV - Jaboticabal, Sao Paulo State, Brazil

The palm collection of UNESP/FCAV, Jaboticabal, Sao Paulo State, Brazil, was created in 1966 with the aim to keep different palm species for research purposes and conservation of native species, especially those threatened. Native and exotic species comprise the collection, which is held at the institution, where several studies with different species and in different areas are undertaken. Nevertheless, palm seeds and seedlings are also distributed to other research centers. The botanical review of the collection began in 2003 and there are, currently, 143 species or hybrids, in a total of 331 specimens. Considering the most ancient species, the immediate identification of many of them was possible; however, for others, such as the Attalea, Orbignya, Syagrus and Scheelea genera, future morphological studies is required, like the karyotype one or using molecular markers. Many species have been introduced and many seeds have been currently investigated regarding their germination process for future inclusion in the collection. Some of the palms do not bloom; others, however, bloom, but do not bear fruits; and others bear fruits, but their seeds do not germinate. They are either young plants, fruits which are constantly attacked by insects, like the Syagrus species and hybrids, or dioecious plants.

Germination of Phoenix roebelenii Seeds

The Phoenix roebelenii O'Brien is one of the most used plants in the Brazilian landscape. The work aimed to study the effect of different fruit harvesting locations, associated with seven temperature conditions, on the germination of P. roebelenii seeds. The fruits were collected from two different locations: Ilha Solteira, western Sao Paulo State and Jaboticabal in the middle East of the same State. The disseminules (seeds with stucked endocarp) were placed in plastic boxes (gerbox), and the experimental design was entirely randomized in a factorial scheme of 7x2 (seven temperatures conditions: room temperature, constant at 20, 25, 30 and 35 degrees C and alternated at 20-30 and 25-35 degrees C; and two fruit harvesting locations: Ilha Solteira and Jaboticabal, with four replications with 25 seeds each. The disseminules that emitted the germinative intumescence were daily noted until the germinative process got steady, in about 90 days. The germination rate (G%), the germination speed index (GSI), and the means were extracted and compared by the Tukey test. The highest values of germination rate were obtained at 30, 25-35 degrees C and room temperatures. The seeds showed a higher GSI at room temperature. The fruit harvesting locations influenced the germination.

Anestesia peridural com lidocaína em um potro: relato de caso

Um equino macho, raça Manga Larga, de 20 dias de idade, pesando 55 kg foi atendido no Hospital Veterinário “Luiz Quintiliano de Oliveira” com histórico de queda no dia anterior, apresentando impotência funcional e desvio do eixo ósseo do membro pélvico esquerdo (MPE). Ao exame radiográfico, constatou-se uma fratura classificada como Salter- Harris tipo II, na região distal da tíbia esquerda, com indicação para osteossíntese. Ao exame físico geral, observou-se frequência cardíaca (FC) de 82 batimentos.min-1, frequência respiratória (f) de 60 movimentos.min-1, mucosas róseas, tempo de preenchimento capilar de dois segundos, temperatura retal (ToC) de 38,5oC e hidratação adequada. Como medicação pré-anestésica, administrou-se xilazina (0,5 mg.kg-1) IV. A indução foi realizada por meio da administração de midazolam (0,1mg.kg-1) e cetamina (2mg.kg-1) IV. Seguiu-se a intubação orotraqueal com sonda n o 12 conectando-se a um circuito anestésico com reinalação parcial de gases, e a manutenção foi realizada com isofluorano em fluxo diluente de oxigênio a 100%, sob ventilação espontânea. Realizou-se a técnica de anestesia peridural com o paciente em decúbito lateral direito, introduzindo uma agulha 30x8 percutaneamente até atingir o espaço peridural entre as vértebras L6 e S1, onde se administrou lidocaína a 2% (2,2mg.kg-1) com vasoconstritor, perfazendo um volume de 6 mLs. Adicionalmente foi realizado o bloqueio perineural dos nervos tibial e fibular do membro acometido, com administração de 5 mLs de lidocaína a 2% com vasoconstritor em cada ponto. A administração de anestésicos locais pela via peridural na região L6 – S1 não é rotineiramente usada em equinos, uma vez que provoca ataxia ou perda do tônus muscular, aumentando os riscos relacionados à intervenção anestésica. No entanto, a recuperação do potro nesse relato de caso foi rápida e isenta de complicações, provalvelmente proporcionando anestesia multimodal e consequentemente menor depressão cardiovascular. A associação da anestesia peridural e bloqueio dos nervos tibial e fibular à anestesia geral, pode ser uma alternativa para intervenções cirúrgicas em membros pélvicos de potros, uma vez que demonstrou ser efetiva e de fácil execução.

Performance Analysis of Sparse Traffic Grooming in WDM Mesh Networks

Sparse traffic grooming is a practical problem to be addressed in heterogeneous multi-vendor optical WDM networks where only some of the optical cross-connects (OXCs) have grooming capabilities. Such a network is called as a sparse grooming network. The sparse grooming problem under dynamic traffic in optical WDM mesh networks is a relatively unexplored problem. In this work, we propose the maximize-lightpath-sharing multi-hop (MLS-MH) grooming algorithm to support dynamic traffic grooming in sparse grooming networks. We also present an analytical model to evaluate the blocking performance of the MLS-MH algorithm. Simulation results show that MLSMH outperforms an existing grooming algorithm, the shortest path single-hop (SPSH) algorithm. The numerical results from analysis show that it matches closely with the simulation. The effect of the number of grooming nodes in the network on the blocking performance is also analyzed.

In vitro evaluation of combined hyperthermia and photodynamic effects using magnetoliposomes loaded with cucurbit[7]uril zinc phthalocyanine complex on melanoma

The aims of this study were two fold; to develop magnetoliposomes (MLs) loaded with zinc phthalocyanine (ZnPc) complexed with cucurbituril (CB) (CB:ZnPc-MLs) and to evaluate their in vitro photodynamic (PD) and/or hyperthermia (HT) effects while using melanoma cells (B16-F10) as model. The liposomal formulations were characterized by both average diameter and zeta potential. The vesicle average size ranged from 150 to 200 nm and the polydispersity index (PdI) from 0.093 to 0.230. The zeta potential was significantly positive with values between 48 and 57 mV. The cell viability (CV) after PD and HT treatments was assessed by colorimetric MTI method. Melanoma cells were initially treated with the liposome formulation without light and magnetic field application, revealing cell viability not different from the control cells (p > 0.05). Photodynamic and hyperthermia assays were also applied separately, demonstrating that PD is more effective than HT in reducing the CV of the neoplastic cells. Combined application of both PD and HT treatments was even more effective in reducing the CV of B16-F10 cells. At the highest light dose (2 J/cm(2)) and under magnetic field activation the CV was about half than PD applied alone. Therefore, the use of the photosensitizer-loaded magnetoliposome for combined photodynamic therapy (PDT) and magnetohyperthermia (MHT) application can be considered as a potential tool to treat malignant melanoma. (C) 2012 Elsevier B.V. All rights reserved.

Bonded structures for enhanced damage tolerant pressurized fuselages

Adhesive bonding provides solutions to realize cost effective and low weight aircraft fuselage structures, in particular where the Damage Tolerance (DT) is the design criterion. Bonded structures that combine Metal Laminates (MLs) and eventually Selective Reinforcements can guarantee slow crack propagation, crack arrest and large damage capability. To optimize the design exploiting the benefit of bonded structures incorporating selective reinforcement requires reliable analysis tools. The effect of bonded doublers / selective reinforcements is very difficult to be predicted numerically or analytically due to the complexity of the underlying mechanisms and failures modes acting. Reliable predictions of crack growth and residual strength can only be based on sound empirical and phenomenological considerations strictly related to the specific structural concept. Large flat stiffened panels that combine MLs and selective reinforcements have been tested with the purpose of investigating solutions applicable to pressurized fuselages. The large test campaign (for a total of 35 stiffened panels) has quantitatively investigated the role of the different metallic skin concepts (monolithic vs. MLs) of the aluminum, titanium and glass-fiber reinforcements, of the stringers material and cross sections and of the geometry and location of doublers / selective reinforcements. Bonded doublers and selective reinforcements confirmed to be outstanding tools to improve the DT properties of structural elements with a minor weight increase. However the choice of proper materials for the skin and the stringers must be not underestimated since they play an important role as well. A fuselage structural concept has been developed to exploit the benefit of a metal laminate design concept in terms of high Fatigue and Damage Tolerance (F&DT) performances. The structure used laminated skin (0.8mm thick), bonded stringers, two different splicing solutions and selective reinforcements (glass prepreg embedded in the laminate) under the circumferential frames. To validate the design concept a curved panel was manufactured and tested under loading conditions representative of a single aisle fuselage: cyclic internal pressurization plus longitudinal loads. The geometry of the panel, design and loading conditions were tailored for the requirements of the upper front fuselage. The curved panel has been fatigue tested for 60 000 cycles before the introduction of artificial damages (cracks in longitudinal and circumferential directions). The crack growth of the artificial damages has been investigated for about 85 000 cycles. At the end a residual strength test has been performed with a “2 bay over broken frame” longitudinal crack. The reparability of this innovative concept has been taken into account during design and demonstrated with the use of an external riveted repair. The F&DT curved panel test has confirmed that a long fatigue life and high damage tolerance can be achieved with a hybrid metal laminate low weight configuration. The superior fatigue life from metal laminates and the high damage tolerance characteristics provided by integrated selective reinforcements are the key concepts that provided the excellent performances. The weight comparison between the innovative bonded concept and a conventional monolithic riveted design solution showed a significant potential weight saving but the weight advantages shall be traded off with the additional costs.

In situ real-time investigation of Organic Ultra-Thin-Film transistors: growth, electrical properties and biosensing applications

Organic electronics has grown enormously during the last decades driven by the encouraging results and the potentiality of these materials for allowing innovative applications, such as flexible-large-area displays, low-cost printable circuits, plastic solar cells and lab-on-a-chip devices. Moreover, their possible field of applications reaches from medicine, biotechnology, process control and environmental monitoring to defense and security requirements. However, a large number of questions regarding the mechanism of device operation remain unanswered. Along the most significant is the charge carrier transport in organic semiconductors, which is not yet well understood. Other example is the correlation between the morphology and the electrical response. Even if it is recognized that growth mode plays a crucial role into the performance of devices, it has not been exhaustively investigated. The main goal of this thesis was the finding of a correlation between growth modes, electrical properties and morphology in organic thin-film transistors (OTFTs). In order to study the thickness dependence of electrical performance in organic ultra-thin-film transistors, we have designed and developed a home-built experimental setup for performing real-time electrical monitoring and post-growth in situ electrical characterization techniques. We have grown pentacene TFTs under high vacuum conditions, varying systematically the deposition rate at a fixed room temperature. The drain source current IDS and the gate source current IGS were monitored in real-time; while a complete post-growth in situ electrical characterization was carried out. At the end, an ex situ morphological investigation was performed by using the atomic force microscope (AFM). In this work, we present the correlation for pentacene TFTs between growth conditions, Debye length and morphology (through the correlation length parameter). We have demonstrated that there is a layered charge carriers distribution, which is strongly dependent of the growth mode (i.e. rate deposition for a fixed temperature), leading to a variation of the conduction channel from 2 to 7 monolayers (MLs). We conciliate earlier reported results that were apparently contradictory. Our results made evident the necessity of reconsidering the concept of Debye length in a layered low-dimensional device. Additionally, we introduce by the first time a breakthrough technique. This technique makes evident the percolation of the first MLs on pentacene TFTs by monitoring the IGS in real-time, correlating morphological phenomena with the device electrical response. The present thesis is organized in the following five chapters. Chapter 1 makes an introduction to the organic electronics, illustrating the operation principle of TFTs. Chapter 2 presents the organic growth from theoretical and experimental points of view. The second part of this chapter presents the electrical characterization of OTFTs and the typical performance of pentacene devices is shown. In addition, we introduce a correcting technique for the reconstruction of measurements hampered by leakage current. In chapter 3, we describe in details the design and operation of our innovative home-built experimental setup for performing real-time and in situ electrical measurements. Some preliminary results and the breakthrough technique for correlating morphological and electrical changes are presented. Chapter 4 meets the most important results obtained in real-time and in situ conditions, which correlate growth conditions, electrical properties and morphology of pentacene TFTs. In chapter 5 we describe applicative experiments where the electrical performance of pentacene TFTs has been investigated in ambient conditions, in contact to water or aqueous solutions and, finally, in the detection of DNA concentration as label-free sensor, within the biosensing framework.

Development of the optimal estimation method for inversion of stratospheric emission spectra and validation of HNO3 profiles

This doctoral thesis focuses on ground-based measurements of stratospheric nitric acid (HNO3)concentrations obtained by means of the Ground-Based Millimeter-wave Spectrometer (GBMS). Pressure broadened HNO3 emission spectra are analyzed using a new inversion algorithm developed as part of this thesis work and the retrieved vertical profiles are extensively compared to satellite-based data. This comparison effort I carried out has a key role in establishing a long-term (1991-2010), global data record of stratospheric HNO3, with an expected impact on studies concerning ozone decline and recovery. The first part of this work is focused on the development of an ad hoc version of the Optimal Estimation Method (Rodgers, 2000) in order to retrieve HNO3 spectra observed by means of GBMS. I also performed a comparison between HNO3 vertical profiles retrieved with the OEM and those obtained with the old iterative Matrix Inversion method. Results show no significant differences in retrieved profiles and error estimates, with the OEM providing however additional information needed to better characterize the retrievals. A final section of this first part of the work is dedicated to a brief review on the application of the OEM to other trace gases observed by GBMS, namely O3 and N2O. The second part of this study deals with the validation of HNO3 profiles obtained with the new inversion method. The first step has been the validation of GBMS measurements of tropospheric opacity, which is a necessary tool in the calibration of any GBMS spectra. This was achieved by means of comparisons among correlative measurements of water vapor column content (or Precipitable Water Vapor, PWV) since, in the spectral region observed by GBMS, the tropospheric opacity is almost entirely due to water vapor absorption. In particular, I compared GBMS PWV measurements collected during the primary field campaign of the ECOWAR project (Bhawar et al., 2008) with simultaneous PWV observations obtained with Vaisala RS92k radiosondes, a Raman lidar, and an IR Fourier transform spectrometer. I found that GBMS PWV measurements are in good agreement with the other three data sets exhibiting a mean difference between observations of ~9%. After this initial validation, GBMS HNO3 retrievals have been compared to two sets of satellite data produced by the two NASA/JPL Microwave Limb Sounder (MLS) experiments (aboard the Upper Atmosphere Research Satellite (UARS) from 1991 to 1999, and on the Earth Observing System (EOS) Aura mission from 2004 to date). This part of my thesis is inserted in GOZCARDS (Global Ozone Chemistry and Related Trace gas Data Records for the Stratosphere), a multi-year project, aimed at developing a long-term data record of stratospheric constituents relevant to the issues of ozone decline and expected recovery. This data record will be based mainly on satellite-derived measurements but ground-based observations will be pivotal for assessing offsets between satellite data sets. Since the GBMS has been operated for more than 15 years, its nitric acid data record offers a unique opportunity for cross-calibrating HNO3 measurements from the two MLS experiments. I compare GBMS HNO3 measurements obtained from the Italian Alpine station of Testa Grigia (45.9° N, 7.7° E, elev. 3500 m), during the period February 2004 - March 2007, and from Thule Air Base, Greenland (76.5°N 68.8°W), during polar winter 2008/09, and Aura MLS observations. A similar intercomparison is made between UARS MLS HNO3 measurements with those carried out from the GBMS at South Pole, Antarctica (90°S), during the most part of 1993 and 1995. I assess systematic differences between GBMS and both UARS and Aura HNO3 data sets at seven potential temperature levels. Results show that, except for measurements carried out at Thule, ground based and satellite data sets are consistent within the errors, at all potential temperature levels.

ARIS-Campaign: Intercomparison of three ground based 22 GHz radiometers for middle atmospheric water vapor at the Zugspitze in winter 2009

This paper presents the Alpine Radiometer Intercomparison at the Schneefernerhaus (ARIS), which took place in winter 2009 at the high altitude station at the Zugspitze, Germany (47.42° N, 10.98° E, 2650 m). This campaign was the first direct intercomparison between three new ground based 22 GHz water vapor radiometers for middle atmospheric profiling with the following instruments participating: MIRA 5 (Karlsruhe Institute of Technology), cWASPAM3 (Max Planck Institute for Solar System Research, Katlenburg-Lindau) and MIAWARA-C (Institute of Applied Physics, University of Bern). Even though the three radiometers all measure middle atmospheric water vapor using the same rotational transition line and similar fundamental set-ups, there are major differences between the front ends, the back ends, the calibration concepts and the profile retrieval. The spectrum comparison shows that all three radiometers measure spectra without severe baseline artifacts and that the measurements are in good general agreement. The measurement noise shows good agreement to the values theoretically expected from the radiometer noise formula. At the same time the comparison of the noise levels shows that there is room for instrumental and calibration improvement, emphasizing the importance of low elevation angles for the observation, a low receiver noise temperature and an efficient calibration scheme. The comparisons of the retrieved profiles show that the agreement between the profiles of MIAWARA-C and cWASPAM3 with the ones of MLS is better than 0.3 ppmv (6%) at all altitudes. MIRA 5 has a dry bias of approximately 0.5 ppm (8%) below 0.1 hPa with respect to all other instruments. The profiles of cWASPAM3 and MIAWARA-C could not be directly compared because the vertical region of overlap was too small. The comparison of the time series at different altitude levels show a similar evolution of the H2O volume mixing ratio (VMR) for the ground based instruments as well as the space borne sensor MLS.