Analyses of lake La Thuile sediment core

Lake La Thuile, in the Northern French Prealps (874 m a.s.l.), provides an 18 m long sedimentary sequence spanning the entire Lateglacial/Holocene period. The high resolution multi-proxy (sedimentological, palynological, geochemical) analysis of the uppermost 6.2 meters reveals the Holocene dynamics of erosion in the catchment in response to landscape modifications. The mountain belt is at relevant altitude to study past human activities and the watershed is sufficiently disconnected from large valleys to capture a local sedimentary signal. From 12,000 to 10,000 cal. BP (10 to 8 ka cal. BC), the onset of hardwood species triggered a drop in erosion following the Lateglacial/Holocene transition. From 10,000 to 4500 cal. BP (8 to 2.5 ka cal. BC), the forest became denser and favored slope stabilization while erosion processes were very weak. A first erosive phase was initiated at ca . 4500 cal. BP without evidence of human presence in the catchment. Then, the forest declined at approximately 3000 cal. BP, suggesting the first human influence on the landscape. Two other erosive phases are related to anthropic activities: approximately 2500 cal. BP (550 cal. BC) during the Roman period and after 1600 cal. BP (350 cal. AD) with a substantial accentuation in the Middle Ages. In contrast, the lower erosion produced during the Little Ice Age, when climate deteriorations are generally considered to result in an increased erosion signal in this region, suggests that anthropic activities dominated the erosive processes and completely masked the natural effects of climate on erosion in the late Holocene.

Infiltración y erosión

Esta monografía se enmarca en el manejo de los recursos hídricos en grandes redes de riego. En ella se describe el caso del río Mendoza, en la provincia homónima, el que fuera regulado en el año 2002. Este río nace en la Cordillera de los Andes, y presenta un importante arrastre de sólidos en suspensión, los que actualmente son retenidos en gran medida por el embalse Potrerillos. Las “aguas claras" que se erogan del embalse producen problemas erosivos, los que a su vez estarían ocasionando una mayor infiltración en los canales, y con ello un incremento en la recarga de acuíferos en ciertas zonas, así como problemas derivados del ascenso de la freática en otras. Se citan procesos ocurridos en otros distritos de riego frente a la regulación de los ríos, para concluir que el del río Mendoza es un caso susceptible de sufrir ciertos per-juicios, ya señalados en la Manifestación General de Impacto Ambiental del embalse Potrerillos, los que actualmente se están presentando en la red de riego. A partir de los estudios de sedimentología en el río Mendoza, se hace un análisis técnico de los fenómenos asociados al cambio de las características físicas del agua. Luego se describen los procesos erosivos, de acuerdo con la hidráulica clásica. Se define la Eficiencia de conducción (Ec), la infiltración en canales y su importancia en distintos distritos de riego, para luego mencionar los estudios realizados en el área del río Mendoza. Se analiza el desarrollo espacial que ha tenido el oasis, la escasa programación que tuvo su traza y la antigüedad de la misma. La descripción de los suelos permite concluir acerca de la importancia de su estructura y del papel que juegan las porciones finas, aún en minoría, que integran las distintas clases texturales con respecto a la Ec. Se describen los criterios con que se distribuye el agua en Mendoza, analizándose los caudales distribuidos actualmente, para relacionarlos con los niveles freáticos. Se mencionan además distintas acciones encaradas por la provincia para mitigar los efectos de las aguas claras. El análisis de los métodos utilizados para medir la Ec, permite apreciar el estado de la ciencia al respecto. Un análisis de las ventajas y de las desventajas de los distintos métodos, y de los resultados que con ellos se obtienen, permite concluir que el método de entradas y salidas es el que mejor se adapta en Mendoza, incluyendo además aspectos metodológicos de la medición. También se concluye en que la Ec. está insuficientemente evaluada; las fracciones finas de los suelos en muchos casos gravitan más que la textura frente a la Ec; por ello, se considera que el estudio de la Ec en las distintas áreas de manejo es necesario para entender los procesos de revenición y recarga de acuíferos, y que las pérdidas administrativas pueden gravitar más que la Ec. Se recomienda continuar con los trabajos de evaluación de Ec, al ser necesarios para todas las actividades en la cuenca; se desaconseja en este río el ajuste de modelos de predicción de Ec; las características de los suelos obligan a interpretar y aplicar con criterio la bibliografía internacional, pero aún así no se pueden hacer generalizaciones acerca de de la Ec en Mendoza.

Sediment volume variations inferred from DGPS measurements within Bossons glacier proglacial area (Mont-Blanc massif, France)

This dataset presents Differential Global Positioning System data (DGPS) acquired within the Bossons glacier proglacial area. Bossons glacier is a rapidly retreating glacier and its proglacial area is deglaciated for ~30 years. Bossons stream is one of the outlets of the subglacial drainage system. It starts as a 800 m steep cascade reach, then flows through an area with gentler slope : the Plan des Eaux (PdE). PdE is a 300 m long, 50 m wide proglacial alluvial plain with an increasing channel mobility in the downstream direction but decreasing slope gradient and incision. As it may act a sediment trap, studying periglacial and proglacial erosion processes in the Bossons catchment requires to quantify PdE sediment volume evolution. A several meter-sized block located within Bossons proglacial area was set up as GPS base : its location was measured by one antenna (Topcon Hyper Pro) by performing 600 consecutive measurements throughout one day. A second antenna (Topcon Hyper Pro) was then used to measure XYZ location of points in the proglacial area with a ~2 m grid. Radio communication between the two antennas allowed differential calculations to be automatically carried out on field using the Topcon FC-250 hand controller. This methodology yields 3 cm XY and 1.5 cm Z uncertainties. DGPS data have been acquired through 10 campaigns from 2004 to 2014; campaigns from 2004 to 2008 cover a smaller area than those from 2010 to 2014. Digital Elevation Model (DEM) have been interpolated from DGPS data and difference between two DEMs yields deposited and eroded volume within PdE. Maps of PdE volume variation between two campaigns show that incision mainly occurs in the upper and lower sections where as deposition dominates in the middle section. Deposition, denudation and net rate (deposition rate - denudation rate) are calculated by normalizing volumes by DEM areas. Deposition dominates results with a mean net rate of 29 mm/yr. However, strong inter-annual variability exists and some years are dominated by denudation : -36 mm/yr and -100 mm/yr for 2006 and 2011, respectively. Nonetheless, oldest campaigns (2004 to 2008) were carried out on the lower part part of the alluvial plain and ruling them out to keep only complete DEM (2010 to 2014) yields a mean net rate of ~15 mm/yr. This results is coherent with field observations of both strong deposition (e.g. flood deposits) and strong erosion (e.g. 30 cm incision) evidences. Bossons glacier proglacial area is thus dynamic with year-to-year geormorphological changes but may leans toward increasing its mean elevation through a deposition dominated system.

Documentation, profile descriptions and analytical results of loes profiles from Bavaria, southern Germany

This study investigates the landscape evolution and soil development in the loess area near Regensburg between approximately 6000-2000 yr BP (radiocarbon years), Eastern Bavaria. The focus is on the question how man and climate influenced landscape evolution and what their relative significance was. The theoretical background concerning the factors that controlled prehistoric soil erosion in Middle Europe is summarized with respect to rainfall intensity and distribution, pedogenesis, Pleistocene relief, and prehistoric farming. Colluvial deposits , flood loams, and soils were studied at ten different and representative sites that served as archives of their respective palaeoenvironments. Geomorphological, sedimentological, and pedological methods were applied. According to the findings presented here, there was a high asynchronity of landscape evolution in the investigation area, which was due to prehistoric land-use patterns. Prehistoric land use and settlement caused highly difIerenciated phases of morphodynamic activity and stability in time and space. These are documented at the single catenas ofeach site. In general, Pleistocene relief was substantially lowered. At the same time smaller landforms such as dells and minor asymmetric valleys filled up and strongly transformed. However, there were short phases at many sites, forming short lived linear erosion features ('Runsen'), resulting from exceptional rainfalls. These forms are results of single events without showing regional trends. Generally, the onset of the sedimentation of colluvial deposits took place much earlier (usually 3500 yr BP (radiocarbon) and younger) than the formation of flood loams. Thus, the deposition of flood loams in the Kleine Laaber river valley started mainly as a consequence of iron age farming only at around 2500 yr BP (radiocarbon). A cascade system explains the different ages of colluvial deposits and flood loams: as a result of prehistoric land use, dells and other minor Pleistocene landforms were filled with colluvial sediments. After the filling of these primary sediment traps , eroded material was transported into flood plains, thus forming flood loams. But at the moment we cannot quantify the extent ofprehistoric soil erosion in the investigation area. The three factors that controlled the prehistoric Iandscapc evolution in the Ioess area near Regensburg are as follows: 1. The transformation from a natural to a prehistoric cultural landscape was the most important factor: A landscape with stable relief was changed into a highly morphodynamic one with soil erosion as the dominant process of this change. 2. The sediment traps of the pre-anthropogenic relief determined where the material originated from soil erosion was deposited: either sedimentation took place on the slopes or the filled sediment traps of the slopes rendered flood loam formation possible. Climatic influence of any importance can only be documented as the result of land use in connection with singular and/or statistic events of heavy rainfalls. Without human impact, no significant change in the Holocene landscape would have been possible.

Hydro-sedimentary parameters measurements within the proglacial area of the Bossons glacier (Mont-Blanc massif, France)

This dataset presents hydro-sedimentary data within the Bossons glacier proglacial area. Bossons glacier is rapidly retreating and its proglacial area is deglaciated for ~ 30 years. It is an intriguing location to study periglacial, proglacial and subglacial erosion processes which requires estimating Total Dissolved Solid (TDS) and Total Suspended Solid (TSS) concentrations, and discharge. Measurements were performed at three distinct locations within Bosson glacier watershed : Bossons downstream (BDS), Bossons upstream (BUS) and Crosette (CRO). The latter is located at the glacier termini whereas BDS and BUS stations are farther downstream from the glacier, at 1.5 and 1.15 km, respectively .

Medem Channel profiles based on stand-alone model simulation and corrections with nudging

State-of-the-art process-based models have shown to be applicable to the simulation and prediction of coastal morphodynamics. On annual to decadal temporal scales, these models may show limitations in reproducing complex natural morphological evolution patterns, such as the movement of bars and tidal channels, e.g. the observed decadal migration of the Medem Channel in the Elbe Estuary, German Bight. Here a morphodynamic model is shown to simulate the hydrodynamics and sediment budgets of the domain to some extent, but fails to adequately reproduce the pronounced channel migration, due to the insufficient implementation of bank erosion processes. In order to allow for long-term simulations of the domain, a nudging method has been introduced to update the model-predicted bathymetries with observations. The model-predicted bathymetry is nudged towards true states in annual time steps. Sensitivity analysis of a user-defined correlation length scale, for the definition of the background error covariance matrix during the nudging procedure, suggests that the optimal error correlation length is similar to the grid cell size, here 80-90 m. Additionally, spatially heterogeneous correlation lengths produce more realistic channel depths than do spatially homogeneous correlation lengths. Consecutive application of the nudging method compensates for the (stand-alone) model prediction errors and corrects the channel migration pattern, with a Brier skill score of 0.78. The proposed nudging method in this study serves as an analytical approach to update model predictions towards a predefined 'true' state for the spatiotemporal interpolation of incomplete morphological data in long-term simulations.

Definición de un Modelo Edafogeomorfológico para la Identificación de Necesidades de Manejo y Recuperación de Suelos a Nivel Local. Caso Cuenca Cañada La Gorda, Machiques Colón, Estado Zulia, Venezuela.

El objetivo de este trabajo es generar un modelo Edafogeomorfológico útil en la identificación de necesidades de manejo de suelos, se realizó un estudio en el área de la cuenca Cañada La Gorda Machiques-Colón, estado Zulia, Venezuela, caracterizada por un clima tropical de condición subhúmeda, con duración del periodo de crecimiento (DPC) de 230 días, régimen de humedad Ustic y de temperatura Isohipertémico. Se empleó el enfoque de la ecuación factorial de formación de suelos para el análisis y descripción biofísica de los factores a lo largo de una carena. El relieve caracterizado a partir de fotografías aéreas, imágenes de satélites y de chequeos sistemático mediante transectos en el sentido del flujo del escurrimiento; la vegetación a través del uso de la tierra, la cobertura vegetal, la identificación de las especies dominantes a partir de sus nombres vernáculos y la definición de indicadores de vegetales (Iv). Los suelos fueron descritos y clasificados según la Taxonomía de suelos y valorados mediante el modelo paramétricode Riquier et al. (1970) para determinar el índice de productividad (Ip). Se caracterizaron dos paisajes gemorfológicos: Colinar (C) y Valle (V), seis posiciones geomorfológicas entre ambos paisajes definidas por la sucesión de relieves en el sentido de la pendiente: Tope de colina-loma (TC), mesa conservada (MC), vertientes de mesa alta (VA), media (VM), baja (VB) y valle intracolinar (VI); e igual número de perfiles de suelos representativos, los cuales mostraron edafogénesis muy avanzada con Ip inferiores a 8% en todas las posiciones, exceptuando la VB, con una productividad de 13%. El uso de la tierra es a base de pastoreo semi-intensivo de plantas forrajeras introducidas. Las formaciones vegetales predominante fueron los matorrales y arbustales dispersos, acompañados con restos de una selva tropófila fuertemente afectada por la extracción forestal y la conversión en áreas de pastoreo. Se identificaron 8 Iv, asociados fuertemente con condiciones de físicas e hidrológicas del suelo. El alto impacto de las actividades humanas sobre el suelo y vegetación, expresado a través de los procesos de erosión activa, la ausencia de áreas boscosas y la baja productividad de los sistemas de ganadería reportada para la zona, señalan la necesidad de reorientación del uso actual de la tierra, para lo cual se plantean alternativas como la incorporación de bosques protectores y sistemas agrosilvopastoriles In order to generate an Edaphogeomorphological model to be used for the identification of management requirements of soils, a study was carried out in the area of the Cañada La Gorda watershed, Machiques Colon, Zulia State with a tropical climate, subsumid conditions with a growing period of 230 days, an Ustic soil moisture and Isohypertermic regimes. The soils factorial equation approach was used for the analisis and description of the factors of soil formation throughout a soil catena. Relief was characterized through aerial photographs, satellite images and systematic checks of transects drawn in the sense of surface runoff and also taking into account geomorphological features. Vegetation cover and land use were described and vegetation components were indified by its local names to defined vegetations indicators (VI) for the local conditions. Soils were described and classified according to soil taxonomy and valued by means of a parametric model proposed by Riquier et al, (1970) for determining the productivity index (PI). Two geomorphological landscapes were defined: Hilly and Valley with six positions within the landscapes: hilltop (round or elongated), preserved tableland summit, slopes of high, medium and low tableland and valleys between hills. Representative soils of each position were studied showing a highly advanced degree of edaphogenesis with PI values below 8% in all positions except the valleys with a PI of 13%. Land use type is based on semi intensive pasturing of introduced forage species, with a vegetation of brushwood and scattered shrubs, with some trees relicts of woods affected by timber extraction and turn to grassland Eight VI were identified, highly associated to local physical and hidrological soil conditions. The enormous impact of human activity on soils and vegetation as shown by active erosion processes and absence of wooded areas and the low productivity of livestock systems reported for the area, indicates the necessity of a reorientation of the present land use introducing alternatives like the incorporation of protective woods and agrosilvopastoral management systems.

Forest Hydrology, Soil Conservation and Green Barriers in Canary Islands

In volcanic islands, the rainfall regime and its torrential nature, together with the steep slopes and the soil types present are considered to be some of the main factors affecting forest hydrology and soil conservation. In such environments, rain regime is generally irregular and characterized by short and intense rainfalls, which could cause destructive flows at times, followed by long periods of rain absence. The volcanic nature of these islands have as a direct resultant steep slopes which influences the runoff volume and speed, as well as the amount of topsoil susceptible to be detached and transported downstream. The soil type also affects the susceptibility to erosion processes. Andisols are the most typical soil on volcanic islands. Their particularities derive their mineral constituents, called short-range-order products, which provide these soils with an increased structural stability, which in turn reduces their susceptibility to erosion. However, the land use changes and the environmental factors such as rain regime and steep slopes may be determinant factor in destabilizing these soils and ultimately a cause for soil erosion and runoffs, which become a threat to the population downstream. Green barriers have been traditionally used to prevent or reduce these processes, also to enhance the dew effect and the fog water collection, and as a firebreak which acts as a barrier to slow or stop the progress of a wildfire. Wooded species present and subsequently their performance have a major influence on their effectiveness. The use of this natural erosion and fire control methods on volcanic islands is discussed in this paper.

Efectos de la erosión del suelo sobre los patrones de la vegetación y su composición florística. Una revisión bibliográfica

En este artículo se revisan los estudios realizados sobre la influencia que tienen los procesos erosivos sobre la vegetación. Fundamentalmente se revisan las tendencias generales en la composición florística de las comunidades vegetales sometidas a fuertes procesos erosivos, así como las tendencias de los patrones de la vegetación y, en menor medida, de los atributos y tipos de plantas. Este campo de trabajo presenta pocos precedentes, siendo escasos los estudios de la influencia de la erosión sobre la vegetación desde un punto de vista ecológico-botánico. Por otro lado, algunos de los resultados parecen a primera vista contradictorios, por lo que es difícil extraer tendencias generales y más o menos universales. Algunas de las generalidades observadas son que el incremento de la erosión del suelo produce un descenso muy claro y mantenido en la cobertura vegetal y en el número de especies. El proceso erosivo no suele acarrear una sustitución de especies vegetales y comunidades, sino solamente la pérdida paulatina de especies, al menos en los estadios más degradados. Por otro lado, se ha observado en ocasiones que la flora de los terrenos más erosionados depende muy fuertemente de las características de la roca madre, variando más entre litologías que la flora de terrenos menos erosionados. Los hemicriptófitos y los caméfitos son las formas vitales de Raunkiaer más frecuentes en estos ambientes. Se discute el papel que pueden tener las diferencias de clima, procesos y tasas erosivas para explicar la gran diversidad de tendencias observadas.

Stochastically forced dislocation density distribution in plastic deformation

The dynamical evolution of dislocations in plastically deformed metals is controlled by both deterministic factors arising out of applied loads and stochastic effects appearing due to fluctuations of internal stress. Such type of stochastic dislocation processes and the associated spatially inhomogeneous modes lead to randomness in the observed deformation structure. Previous studies have analyzed the role of randomness in such textural evolution but none of these models have considered the impact of a finite decay time (all previous models assumed instantaneous relaxation which is "unphysical") of the stochastic perturbations in the overall dynamics of the system. The present article bridges this knowledge gap by introducing a colored noise in the form of an Ornstein-Uhlenbeck noise in the analysis of a class of linear and nonlinear Wiener and Ornstein-Uhlenbeck processes that these structural dislocation dynamics could be mapped on to. Based on an analysis of the relevant Fokker-Planck model, our results show that linear Wiener processes remain unaffected by the second time scale in the problem but all nonlinear processes, both Wiener type and Ornstein-Uhlenbeck type, scale as a function of the noise decay time τ. The results are expected to ramify existing experimental observations and inspire new numerical and laboratory tests to gain further insight into the competition between deterministic and random effects in modeling plastically deformed samples.

Le processus de thermo-érosion du pergélisol dans la zone de pergélisol continu

Les polygones à coin de glace sont très répandus dans la zone du pergélisol continu. Lorsque le ruissellement d’eau de fonte nivale s’infiltre de façon concentrée dans une cavité, il peut initier le processus de thermo-érosion du pergélisol (notamment des coins de glace) pouvant mener à la formation de ravins. Dans la vallée de Qalikturvik sur l’Ile Bylot (NU, Canada), le développement de ravins de thermo-érosion dans un milieu de polygones à coins de glace entraîne comme impact : i. la réorganisation des réseaux de drainage impliquant un assèchement des milieux humides en marge des chenaux d’érosion, ii. des variations dans le régime thermique et de l’humidité de proche-surface et iii. la prise en charge et le déplacement des sédiments vers l’extérieur du bassin-versant. L’objectif de cette thèse vise à approfondir les connaissances géomorphologiques propres au ravinement par thermo-érosion, d’examiner, caractériser et quantifier les impacts du ravinement (tel que sus-mentionné en i. ii. iii.) et le rôle de celui-ci dans une optique d’évolution du paysage périglaciaire à l’échelle temporelle de l’année à la décennie. Les ravins sont dynamiques : un ravin en particulier déclenché en 1999 et étudié depuis s’érodait à une vitesse de 38 à 50 m/a durant sa première décennie d’existence, pour atteindre une longueur totale de ~750 m et une surface érodée de ~25 000 m² en 2009. Des puits sont localisés près des zones de ravinement actives ; des levées alluviale, mares et polygones effondrés dans les zones stabilisées post-perturbation. Sur la terrasse de polygones recouvrant le plancher de la vallée au site à l’étude, 35 ravins furent identifiés et 1401 polygones furent perturbés avec 200 000 m³ de sols transportés. Une amélioration du drainage, une dégradation de la capacité de rétention de l’humidité, une transition d’un écoulement de ruissellement vers un écoulement canalisé caractérise les aires ravinées et leurs environs. Les polygones intacts sont homogènes d’un à l’autre et dans leurs centres ; les polygones perturbés ont une réponse hétérogène (flore, humidité et régime thermique). Les milieux érodés hétérogènes succèdent aux milieux homogènes et deviennent le nouvel état d’équilibre pour plusieurs décennies.

Nd and Sm content and isotopic composition of the carbonate-free clay fraction of sediment core HU90-013-013

Sm-Nd concentrations and Nd isotopes were investigated in the fine fraction of two Labrador Sea cores to reconstruct the deep circulation patterns through changes in sedimentary supply since the last glacial stage. Three sources are involved: the North American Shield, Palaeozoic rocks from northeastern Greenland, and mid-Atlantic volcanism. The variable input of these sources provides constraints on the relative sedimentary supply, in conjunction with inception of deep currents. During the last glacial stage a persistent but sluggish current occurred inside the Labrador Basin. An increasing discharge of volcanic material driven by the North East Atlantic Deep Water is documented since 14.3 kyr, signaling the setup of a modern-like deep circulation pattern throughout the Labrador, Irminger, and Iceland basins. During the last deglacial stage the isotopic record was punctually influenced by erosion processes related mainly to ice-sheet instabilities, especially 11.4, 10.2, and 9.2 kyr ago.

Biogeochemical, sedimentological and isotopic sediment record of Lake Dojran

A Late Glacial to Holocene sediment sequence (Co1260, 717 cm) from Lake Dojran, located at the boarder of the F.Y.R. of Macedonia and Greece, has been investigated to provide information on climate variability in the Balkan region. A robust age-model was established from 13 radiocarbon ages, and indicates that the base of the sequence was deposited at ca. 12 500 cal yr BP, when the lake-level was low. Variations in sedimentological (H2O, TOC, CaCO3, TS, TOC/TN, TOC/TS, grain-size, XRF, d18Ocarb, d13Ccarb, d13Corg) data were linked to hydro-acoustic data and indicate that warmer and more humid climate conditions characterised the remaining period of the Younger Dryas until the beginning of the Holocene. The Holocene exhibits significant environmental variations, including the 8.2 and 4.2 ka cooling events, the Medieval Warm Period and the Little Ice Age. Human induced erosion processes in the catchment of Lake Dojran intensified after 2800 cal yr BP.

Sediment Budget for Cane Land on the Lower Herbert River Floodplain, North Queensland, Australia

Land use in the river catchments of tropical North Queensland appears to have increased the export of sediment and nutrients to the coast. Although evidence of harmful effect of sediment on coastal and riverine ecosystems is limited, there is a growing concern about its possible negative impacts. Sugarcane cultivation on the floodplains of the tropical North Queensland river catchments is thought to be an important source of excess sediment in the river drainage systems. Minimum-tillage, trash blanket harvesting has been shown to reduce erosion from sloping sugarcane fields, but in the strongly modified floodplain landscape other elements (e.g. drains, water furrows and headlands) could still be important sediment sources. The main objectives of this thesis are to quantify the amount of sediment coming from low-lying cane land and identify the important sediment sources in the landscape. The results of this thesis enable sugarcane farmers to take targeted measures for further reduction of the export of sediment and nutrients. Sediment budgets provide a useful approach to identify and quantify potential sediment sources. For this study a sediment budget is calculated for a part of the Ripple Creek catchment, which is a sub-catchment of the Lower Herbert River. The input of sediment from all potential sources in cane land and the storage of sediment within the catchment have been quantified and compared with the output of sediment from the catchment. Input from, and storage on headlands, main drains, minor drains and water furrows, was estimated from erosion pin and surface profile measurements. Input from forested upland, input from fields and the output at the outlet of the catchment was estimated with discharge data from gauged streams and flumes. Data for the sediment budget were collected during two ‘wet’-seasons: 1999-2000 and 2000-2001. The results of the sediment budget indicate that this tropical floodplain area is a net source of sediment. Plant cane fields, which do not have a protective trash cover, were the largest net source of sediment during the 1999-2000 season. Sediment input from water furrows was higher, but there was also considerable storage of sediment in this landscape element. Headlands tend to act as sinks. The source or sink function of drains is less clear, but seems to depend on their shape and vegetation cover. An important problem in this study is the high uncertainty in the estimates of the sediment budget components and is, for example, likely to be the cause of the imbalance in the sediment budget. High uncertainties have particularly affected the results from the 20002001 season. The main source of uncertainty is spatial variation in the erosion and deposition processes. Uncertainty has to be taken into consideration when interpreting the budget results. The observation of a floodplain as sediment source contradicts the general understanding that floodplains are areas of sediment storage within river catchments. A second objective of this thesis was therefore to provide an answer to the question: how can floodplains in the tropical North Queensland catchments can be a source of sediment? In geomorphic literature various factors have been pointed out, that could control floodplain erosion processes. However, their importance is not 'uniquely identified'. Among the most apparent factors are the stream power of the floodwater and the resistance of the floodplain surface both through its sedimentary composition and the vegetation cover. If the cultivated floodplains of the North Queensland catchments are considered in the light of these factors, there is a justified reason to expect them to be a sediment source. Cultivation has lowered the resistance of their surface; increased drainage has increased the drainage velocity and flood control structures have altered flooding patterns. For the Ripple Creek floodplain four qualitative scenarios have been developed that describe erosion and deposition under different flow conditions. Two of these scenarios were experienced during the budget study, involving runoff from local hillslopes and heavy rainfall, which caused floodplain erosion. In the longer term larger flood events, involving floodwater from the Herbert River, may lead to different erosion and deposition processes. The present study has shown that the tropical floodplain of the Herbert River catchment can be a source of sediment under particular flow conditions. It has also shown which elements in the sugarcane landscape are the most important sediment sources under these conditions. This understanding will enable sugarcane farmers to further reduce sediment export from cane land and prevent the negative impact this may have on the North Queensland coastal ecosystems.

Development of a model to predict the life of pneumatic conveyor bends subject to erosive wear

The erosion processes resulting from flow of fluids (gas-solid or liquid-solid) are encountered in nature and many industrial processes. The common feature of these erosion processes is the interaction of the fluid (particle) with its boundary thus resulting in the loss of material from the surface. This type of erosion in detrimental to the equipment used in pneumatic conveying systems. The puncture of pneumatic conveyor bends in industry causes several problems. Some of which are: (1) Escape of the conveyed product causing health and dust hazard; (2) Repairing and cleaning up after punctures necessitates shutting down conveyors, which will affect the operation of the plant, thus reducing profitability. The most common occurrence of process failure in pneumatic conveying systems is when pipe sections at the bends wear away and puncture. The reason for this is particles of varying speed, shape, size and material properties strike the bend wall with greater intensity than in straight sections of the pipe. Currently available models for predicting the lifetime of bends are inaccurate (over predict by 80%. The provision of an accurate predictive method would lead to improvements in the structure of the planned maintenance programmes of processes, thus reducing unplanned shutdowns and ultimately the downtime costs associated with these unplanned shutdowns. This is the main motivation behind the current research. The paper reports on two aspects of the first phases of the study-undertaken for the current project. These are (1) Development and implementation; and (2) Testing of the modelling environment. The model framework encompasses Computational Fluid Dynamics (CFD) related engineering tools, based on Eulerian (gas) and Lagrangian (particle) approaches to represent the two distinct conveyed phases, to predict the lifetime of conveyor bends. The method attempts to account for the effect of erosion on the pipe wall via particle impacts, taking into account the angle of attack, impact velocity, shape/size and material properties of the wall and conveyed material, within a CFD framework. Only a handful of researchers use CFD as the basis of predicting the particle motion, see for example [1-4] . It is hoped that this would lead to more realistic predictions of the wear profile. Results, for two, three-dimensional test cases using the commercially available CFD PHOENICS are presented. These are reported in relation to the impact intensity and sensitivity to the inlet particle distributions.