Simple period timing device for laser Doppler signals

A period timing device suitable for processing laser Doppler anemometer signals has been described here. The important features of this instrument are: it is inexpensive, simple to operate, and easy to fabricate. When the concentration of scattering particles is low the Doppler signal is in the form of a burst and the Doppler frequency is measured by timing the zero crossings of the signal. But the presence of noise calls for the use of validation criterion, and a 5–8 cycles comparison has been used in this instrument. Validation criterion requires the differential count between the 5 and 8 cycles to be multiplied by predetermined numbers that prescribe the accuracy of measurement. By choosing these numbers to be binary numbers, much simplification in circuit design has been accomplished since this permits the use of shift registers for multiplication. Validation accuracies of 1.6%, 3.2%, 6.3%, and 12.5% are possible with this device. The design presented here is for a 16-bit processor and uses TTL components. By substituting Schottky barrier TTLs the clock frequency can be increased from about 10 to 30 MHz resulting in an extension in the range of the instrument. Review of Scientific Instruments is copyrighted by The American Institute of Physics.

Phenotyping novel stay-green traits to capture genetic variation in senescence dynamics

Stay-green plants retain green leaves longer after anthesis and can have improved yield, particularly under water limitation. As senescence is a dynamic process, genotypes with different senescence patterns may exhibit similar final normalised difference vegetative index (NDVI). By monitoring NDVI from as early as awn emergence to maturity, we demonstrate that analysing senescence dynamics improves insight into genotypic stay-green variation. A senescence evaluation tool was developed to fit a logistic function to NDVI data and used to analyse data from three environments for a wheat (Triticum aestivum L.) population whose lines contrast for stay-green. Key stay-green traits were estimated including, maximum NDVI, senescence rate and a trait integrating NDVI variation after anthesis, as well as the timing from anthesis to onset, midpoint and conclusion of senescence. The integrative trait and the timing to onset and mid-senescence exhibited high positive correlations with yield and a high heritability in the three studied environments. Senescence rate was correlated with yield in some environments, whereas maximum NDVI was associated with yield in a drought-stressed environment. Where resources preclude frequent measurements, we found that NDVI measurements may be restricted to the period of rapid senescence, but caution is required when dealing with lines of different phenology. In contrast, regular monitoring during the whole period after flowering allows the estimation of senescence dynamics traits that may be reliably compared across genotypes and environments. We anticipate that selection for stay-green traits will enhance genetic progress towards high-yielding, stay-green germplasm.

The critical period for weed control in dry-seeded rice

The critical crop-weed competition period in a dry-seeded rice system is an important consideration in formulating weed management strategies. Field experiments were conducted in the summer seasons of 2012 and 2013 at the Punjab Agricultural University, Ludhiana, India, to determine the extent of yield loss in two different rice cultivars (PR 114 and PR 115) with different periods of weed interference. Twelve weed control timings were used to identify critical periods of weed competition in dry-seeded rice. PR 114, a long-duration rice cultivar (145 d) having slower initial growth than PR 115 (125 d), was more prone to yield losses. In both years, 100% yield loss was observed where weeds were not controlled throughout the season. In weed-free plots, the grain yield of PR 114 was 6.39-6.80 t ha-1, for PR 115, it was 6.49-6.87 t ha-1. Gompertz and logistic equations fitted to yield data in response to increasing periods of weed control and weed interference showed that, PR 114 had longer critical periods than PR 115. Critical weed-free periods to achieve 95% of weed-free yield for PR 114 was longer than for PR 115 by 31 days in 2012 and 26 days in 2013. Weed infestation also influenced the duration of critical periods. Higher weed pressure in 2012 than in 2013 increased the duration of the critical period of crop-weed competition in that year. The identification of critical crop-weed competition periods for different cultivars will facilitate improved decision-making regarding the timing of weed control and the adoption of cultivars having high weed-suppressing abilities. This will also contribute to the development of integrated weed management in dry-seeded rice systems.

Switching period randomisation for multilevel converter modulation

The spectral energy associated with the carrier and sidebands of naturally sampled carrier based PWM can be spread by randomising the carrier (switch) half-period Tc = 1/2fc. So long as the switch duty cycle each period still correctly reflects the value of the modulating fundamental waveform as sampled during that switch period, then the fundamental component will remain undistorted. Natural sampling will ensure this occurs. Carrier based PWM can be extended to (m+1) level multilevel converter waveform generation by creating m triangular carriers, each with an equal 2*pi/m phase displacement. Alternatively the carrier disposition strategy calls for m amplitude displaced triangular carriers, each of amplitude 1/m and frequency mfc. Randomising these carrier sub-periods T0> = 1/2mfc is shown to generate (m+ 1) level PWM waveforms where the first (m-1) carrier groups are cancelled, while the remaining carrier and sidebands at multiples of mfc are spectrally spread. Numerous five level simulation and experimentally gathered randomised PWM waveforms are presented, showing the effects of the variation of the degree of randomisation, modulation depth and pulse number.

Foreign Capital and Finland : Central government's first period of reliance on international financial markets, 1862-1938

The main objective of the study is to evaluate the Finnish central government s foreign borrowing between the years 1862 and 1938. Most of this period was characterised by deep capital market integration that bears resemblance to the liberal world financial order at the turn of the millennium. The main aim is to analyse the credit risk associated with the state and its determination by evaluating the world financial market centres perception of Finland. By doing this, the study is also expected to provide an additional dimension to Finland s political and economic history by incorporating into the research the assessments of international capital markets regarding Finland during a period that witnessed profound political and economic changes in Finnish society. The evaluation of the credit risk mainly relies on exchange-rate risk free time series of the state s foreign bonds. They have been collected from quotations in the stock exchanges in Helsinki, Hamburg, Paris and London. In addition, it investigates Finland s exposure to short-term debt and Moody s credit ratings assigned to Finland. The study emphasises the importance of the political risk. It suggests that the hey-day of the state s reliance on foreign capital markets took place during last few decades of the 19th century when Finland enjoyed a wide autonomy in the Russian Empire and prudently managed its economy, highlighted in Finland s adherence to the international gold standard. Political confrontations in Finland and, in particular, in Russia and the turbulence of the world financial system prevented the return of this beneficial position again. Through its issuance of foreign bonds the state was able to import substantial amounts of foreign capital, which was sorely needed to foster economic development in Finland. Moreover, the study argues that the state s presence in the western capital markets not only had economic benefits, but it also increased the international awareness of Finland s distinct and separate status in the Russian Empire and later underlined its position as an independent republic.

A model for determining the optimal project life span and concession period of BOT projects

The concession agreement is the core feature of BOT projects, with the concession period being the most essential feature in determining the time span of the various rights, obligations and responsibilities of the government and concessionaire. Concession period design is therefore crucial for financial viability and determining the benefit/cost allocation between the host government and the concessionaire. However, while the concession period and project life span are essentially interdependent, most methods to date consider their determination as contiguous events that are determined exogenously. Moreover, these methods seldom consider the, often uncertain, social benefits and costs involved that are critical in defining, pricing and distributing benefits and costs between the various parties and evaluating potentially distributable cash flows. In this paper, we present the results of the first stage of a research project aimed at determining the optimal build-operate-transfer (BOT) project life span and concession period endogenously and interdependently by maximizing the combined benefits of stakeholders. Based on the estimation of the economic and social development involved, a negotiation space of the concession period interval is obtained, with its lower boundary creating the desired financial return for the private investors and its upper boundary ensuring the economic feasibility of the host government as well as the maximized welfare within the project life. The outcome of the new quantitative model is considered as a suitable basis for future field trials prior to implementation. The structure and details of the model are provided in the paper with Hong Kong tunnel project as a case study to demonstrate its detailed application. The basic contributions of the paper to the theory of construction procurement are that the project life span and concession period are determined jointly and the social benefits taken into account in the examination of project financial benefits. In practical terms, the model goes beyond the current practice of linear-process thinking and should enable engineering consultants to provide project information more rationally and accurately to BOT project bidders and increase the government's prospects of successfully entering into a contract with a concessionaire. This is expected to generate more negotiation space for the government and concessionaire in determining the major socioeconomic features of individual BOT contracts when negotiating the concession period. As a result, the use of the model should increase the total benefit to both parties.

Successful recovery of preimplantation embryos by nonsurgical uterine flushing in the bonnet monkey

A major limitation to progress in primate embryology is the lack of an adequate supply of preimplantation embryos. We describe a method for recovering preimplantation-embryos in bonnet monkeys (Macaca radiata ) using a nonsurgical uterine flushing technique similar to the one previously employed in rhesus monkeys. Forty cyclic females were screened for cervical cannulation, and 10% of these had an impassable cervix. Eleven females suitable for cannulation were selected, and 27 menstrual cycles were monitored over a 5-mo period. Seventy-one percent of the cycles showed estrogen peaks, which were observed between Days 9 and 14 of the cycle. Following natural mating, uterine flushings were performed on Days 5 to 8 of pregnancy (Day 0 = the day following the estrogen peak). Of the 27 recovery attempts, 9 (33.3%) resulted in the recovery of ovulation products, including those of an unfertilized oocyte and empty zona (2 cases), retarded cleavage-stage (4 to 8-cell) embryos (4 cases), morula (1 case) and blastocysts (2 cases). These results show, for the first time, that the nonsurgical uterine flushing technique can be successfully performed to recover uterine-stage preimplantation embryos from bonnet monkeys.

Additively manufactured device for dynamic culture of large arrays of 3D tissue engineered constructs

The ability to test large arrays of cell and biomaterial combinations in 3D environments is still rather limited in the context of tissue engineering and regenerative medicine. This limitation can be generally addressed by employing highly automated and reproducible methodologies. This study reports on the development of a highly versatile and upscalable method based on additive manufacturing for the fabrication of arrays of scaffolds, which are enclosed into individualized perfusion chambers. Devices containing eight scaffolds and their corresponding bioreactor chambers are simultaneously fabricated utilizing a dual extrusion additive manufacturing system. To demonstrate the versatility of the concept, the scaffolds, while enclosed into the device, are subsequently surface-coated with a biomimetic calcium phosphate layer by perfusion with simulated body fluid solution. 96 scaffolds are simultaneously seeded and cultured with human osteoblasts under highly controlled bidirectional perfusion dynamic conditions over 4 weeks. Both coated and noncoated resulting scaffolds show homogeneous cell distribution and high cell viability throughout the 4 weeks culture period and CaP-coated scaffolds result in a significantly increased cell number. The methodology developed in this work exemplifies the applicability of additive manufacturing as a tool for further automation of studies in the field of tissue engineering and regenerative medicine.

Causes of death in patients with rheumatoid arthritis over a 40-year period : with special emphasis on autopsy

Rheumatoid arthritis (RA) patients have premature mortality. Contrary to the general population, mortality in RA has not declined over time. This study aimed to evaluate determinants of mortality in RA by examining causes of death (CoDs) over time, accuracy of CoD diagnoses, and contribution of RA medication to CoDs. This study further evaluated detection rate of reactive systemic amyloid A amyloidosis, which is an important contributor to RA mortality. CoDs were examined in 960 RA patients between 1971 and 1991 (Study population A) and in 369 RA patients autopsied from 1952 to 1991, with non-RA patients serving as the reference cases (Study population B). In Study population B, CoDs by the clinician before autopsy were compared to those by the pathologist at autopsy to study accuracy of CoD diagnoses. In Study population B, autopsy tissue samples were re-examined systematically for amyloidosis (90% of patients) and clinical data for RA patients was studied from 1973. RA patients died most frequently of cardiovascular diseases (CVDs), infections, and RA. RA deaths declined over time. Coronary deaths showed no major change in Study population A, but, in Study population B, coronary deaths in RA patients increased from 1952 to 1991, while non-RA cases had a decrease in coronary deaths starting in the 1970s. Between CoD diagnoses by the clinician and those by the pathologist, RA patients had lower agreement than non-RA cases regarding cardiovascular (Kappa reliability measure: 0.31 vs. 0.51) and coronary deaths (0.33 vs. 0.46). Use of disease modifying anti-rheumatic drugs was not associated with any CoD. In RA patients, re-examination of autopsy tissue samples doubled the prevalence of amyloid compared with the original autopsy: from 18% to 30%. In the amyloid-positive RA patients, amyloidosis was diagnosed before autopsy in only 37%; and they had higher inflammatory levels and longer duration of RA than amyloid-negative RA patients. Of the RA patients with amyloid, only half had renal failure or proteinuria during lifetime. In RA, most important determinants of mortality were CVDs, RA, and infections. In RA patients, RA deaths decreased over time, but this was not true for coronary deaths. Coronary death being less accurately diagnosed in RA may indicate that coronary heart disease (CHD) often goes unrecognized during lifetime. Thus, active search for CHD and its effective treatment is important to reduce cardiovascular mortality. Reactive amyloidosis may often go undetected. In RA patients with proteinuria or renal failure, as well as with active and long-lasting RA, a systematic search for amyloid is important to enable early diagnosis and early enhancement of therapy. This is essential to prevent clinical manifestations of amyloidosis such as renal failure, which has a poor prognosis.

Mothers' sleepiness and driving in the postpartum period

The postpartum period is typically a time of increased sleepiness, however little research has investigated mothers' sleepiness whilst driving during this period. The research presented in this thesis details three studies systematically designed to assess postpartum mothers' sleepiness and driving, followed by the utilisation of this information in the development of an information-based program designed to convey pertinent evidence-based information about postpartum sleepiness, sleep, and sleepy driving.

Pollinator limitation and the effect of breeding systems on plant reproduction in forest fragments

Reproduction of plants in fragmented habitats may be limited because of lower diversity or abundance of pollinators, and/or variation in local plant density. We assessed natural fruit set and pollinator limitation in ten species of woody plants in natural and restored fragments in the Pondicherry region of southern India, to see whether breeding system of plants (self-compatible and self-incompatible) affected fruit set. We tested whether the number of flowering individuals in the fragments affected the fruit set and further examined the adult and sapling densities of self-compatible (SC) and self-incompatible (SI) species. We measured the natural level of fruit set and pollinator limitation (calculated as the difference in fruit set between hand cross-pollinated and naturally pollinated flowers). Our results demonstrate that there was a higher level of pollinator limitation and hence lower levels of natural fruit set in self-incompatible species as compared to self-compatible species. However, the hand cross-pollinated flowers in SC and SI species produced similar levels of fruit set,further indicating that lower fruit set was due to pollinator limitation and not due to lack of cross-compatible individuals in the fragments. There was no significant relation between number of flowering individuals and the levels of natural fruit set, except for two species Derris ovalifolia, Ixora pavetta. In these species the natural fruit set decreased with increasing population size, again indicating pollinator limitation. The adult and sapling densities in self-compatible species were significantly higher than inself-incompatible species. These findings indicate that the low reproductive output in self-incompatible species may eventually lead to lower population sizes. Restoration of pollinator services along with plant species in fragmented habitats is important for the long-term conservation of biodiversity. (C) 2009 Elsevier Masson SAS. All rights reserved.