History of Molluscan Fishery Regulations and the Shellfish Officer Service in Massachusetts

Oysters, Crassostrea virginica, and softshell clams, Mya arenaria, along the Massachusetts coast were harvested by European colonists beginning in the 1600’s. By the 1700’s, official Commonwealth rules were established to regulate their harvests. In the final quarter of the 1800’s, commercial fishermen began harvesting northern quahogs, Mercenaria mercenaria, and northern bay scallops, Argopecten irradians irradians, and regulations established by the Massachusetts Legislature were applied to their harvests also. Constables (also termed wardens), whose salaries were paid by the local towns, enforced the regulations, which centered on restricting harvests to certain seasons, preventing seed from being taken, and personal daily limits on harvests. In 1933, the Massachusetts Legislature turned over shellfisheries management to individual towns. Local constables (wardens) enforced the rules. In the 1970’s, the Massachusetts Shellfish Officers Association was formed, and was officially incorporated in 2000, to help the constables deal with increasing environmental problems in estuaries where fishermen harvest mollusks. The constables’ stewardship of the molluscan resources and the estuarine environments and promotion of the fisheries has become increasingly complex.

History of the Bay Scallop, Argopecten irradians, Fisheries and Habitats in eastern North America, Massachusetts through northeastern Mexico

This is a broad historical overview of the bay scallop, Argopecten irradians, fishery on the East and Gulf Coasts of North America (Fig. 1). For a little over a century, from about the mid 1870’s to the mid 1980’s, bay scallops supported large commercial fisheries mainly in the U.S. states of Massachusetts, New York, and North Carolina and on smaller scales in the states in between and in western Florida. In these states, the annual harvests and dollar value of bay scallops were far smaller than those of the other important commercial mollusks, the eastern oysters, Crassostrea virginica, and northern quahogs, Mercenaria mercenaria, but they were higher than those of softshell clams, Mya arenaria (Table 1). The fishery had considerable economic importance in the states’ coastal towns, because bay scallops are a high-value product and the fishery was active during the winter months when the economies in most towns were otherwise slow. The scallops also had cultural importance as a special food, an ornament owing to its pretty shell design, and an interesting biological component of

The Bay Scallop, Argopecten irradians, Massachusetts Through North Carolina: Its Biology and the History of Its Habitats and Fisheries

This article covers the biology and the history of the bay scallop habitats and fishery from Massachusetts to North Carolina. The scallop species that ranges from Massachusetts to New York is Argopecten irradians irradians. In New Jersey, this species grades into A. i. concentricus, which then ranges from Maryland though North Carolina. Bay scallops inhabit broad, shallow bays usually containing eelgrass meadows, an important component in their habitat. Eelgrass appears to be a factor in the production of scallop larvae and also the protection of juveniles, especially, from predation. Bay scallops spawn during the warm months and live for 18–30 months. Only two generations of scallops are present at any time. The abundances of each vary widely among bays and years. Scallops were harvested along with other mollusks on a small scale by Native Americans. During most of the 1800’s, people of European descent gathered them at wading depths or from beaches where storms had washed them ashore. Scallop shells were also and continue to be commonly used in ornaments. Some fishing for bay scallops began in the 1850’s and 1860’s, when the A-frame dredge became available and markets were being developed for the large, white, tasty scallop adductor muscles, and by the 1870’s commercial-scale fishing was underway. This has always been a cold-season fishery: scallops achieve full size by late fall, and the eyes or hearts (adductor muscles) remain preserved in the cold weather while enroute by trains and trucks to city markets. The first boats used were sailing catboats and sloops in New England and New York. To a lesser extent, scallops probably were also harvested by using push nets, picking them up with scoop nets, and anchor-roading. In the 1910’s and 1920’s, the sails on catboats were replaced with gasoline engines. By the mid 1940’s, outboard motors became more available and with them the numbers of fishermen increased. The increases consisted of parttimers who took leaves of 2–4 weeks from their regular jobs to earn extra money. In the years when scallops were abundant on local beds, the fishery employed as many as 10–50% of the towns’ workforces for a month or two. As scallops are a higher-priced commodity, the fishery could bring a substantial amount of money into the local economies. Massachusetts was the leading state in scallop landings. In the early 1980’s, its annual landings averaged about 190,000 bu/yr, while New York and North Carolina each landed about 45,000 bu/yr. Landings in the other states in earlier years were much smaller than in these three states. Bay scallop landings from Massachusetts to New York have fallen sharply since 1985, when a picoplankton, termed “brown tide,” bloomed densely and killed most scallops as well as extensive meadows of eelgrass. The landings have remained low, large meadows of eelgrass have declined in size, apparently the species of phytoplankton the scallops use as food has changed in composition and in seasonal abundance, and the abundances of predators have increased. The North Carolina landings have fallen since cownose rays, Rhinoptera bonsais, became abundant and consumed most scallops every year before the fishermen could harvest them. The only areas where the scallop fishery remains consistently viable, though smaller by 60–70%, are Martha’s Vineyard, Nantucket, Mass., and inside the coastal inlets in southwestern Long Island, N.Y.

Age, size, and sexual maturity of channeled whelk (Busycotypus canaliculatus) in Buzzards Bay, Massachusetts

With the southern New England lobster fishery in distress, lobster fishermen have focused more effort toward harvesting channeled whelk (Busycotypus canaliculatus). However, minimal research has been conducted on the life history and growth rates of channeled whelk. Melongenid whelks generally grow slowly and mature late in life, a characteristic that can make them vulnerable to overfishing as fishing pressure increases. We sampled channeled whelk from Buzzards Bay, Massachusetts, in August 2010 and in July 2011, studied their gonad development by histology, and aged them by examining opercula. Males had a slower growth rate and a lower maximum size than females. Male whelk reached 50% maturity (SM50) at 115.5 mm shell length (SL) and at the age of 6.9 years. Female whelk reached SM50 at 155.3 mm SL and at the age of 8.6 years. With a minimum size limit of 69.9 mm (2.75 in) in shell width, males entered the fishery at 7.5 years, a few months after SM50, but females entered the fishery at 6.3 years, approximately 2 years before SM50. Increased fishing pressure combined with slow growth rates and the inability to reproduce before being harvested can easily constrain the long-term viability of the channeled whelk fishery in Massachusetts.

Contact and channel modelling using part and function libraries in a function-based design approach

To support the development and analysis of engineering designs at the embodiment stage, designers work iteratively with representations of those designs as they consider the function and form of their constituent parts. Detailed descriptions of "what a machine does" usually include flows of forces and active principles within the technical system, and their localization within parts and across the interfaces between them. This means that a representation should assist a designer in considering form and function at the same time and at different levels of abstraction. This paper describes a design modelling approach that enables designers to break down a system architecture into its subsystems and parts, while assigning functions and flows to parts and the interfaces between them. In turn, this may reveal further requirements to fulfil functions in order to complete the design. The approach is implemented in a software tool which provides a uniform, computable language allowing the user to describe functions and flows as they are iteratively discovered, created and embodied. A database of parts allows the user to search for existing design solutions. The approach is illustrated through an example: modelling the complex mechanisms within a humanoid robot. Copyright © 2010 by ASME.

Polymorphic microsatellites in largemouth bronze gudgeon (Coreius guichenoti) developed from repeat-enriched libraries and cross-species amplifications

Largemouth bronze gudgeon (Coreius guichenoti) is a medium-sized fish endemic from the upper Yangtze River of China and its survival is threatened by the construction of the Three Gorges Dam. This study reports 20 new polymorphic microsatellites from a repeat-enriched genomic library with a mean number allele of 5.2, and observed and expected heterozygosities ranging from 0.035 to 1, and from 0.13 to 0.917, respectively. In a cross-species amplification test, nine of the 37 tested loci were found to be also polymorphic in a congeneric species, brass gudgeon (C. heterodon). In addition, other four loci from common carp (Cyprinus carpio) were also polymorphic in C. guichenoti. Out of these 24 polymorphic microsatellites, only three loci significantly deviated from Hardy-Weinberg equilibrium in the sampled population (P < 0.0025), and all pairwise tests for linkage disequilibrium among loci were nonsignificant after applying sequential Bonferroni correction (P > 0.0026). These novel microsatellites provide sufficient levels of polymorphism for studies on population genetics and conservation in C. guichenoti and its related species.

Quantified MS analysis applied to combinatorial heterogeneous catalyst libraries

A high-throughput screening system for secondary catalyst libraries has been developed by incorporation of an 80-pass reactor and a quantified multistream mass spectrometer screening (MSMSS) technique. With a low-melting alloy as the heating medium, a uniform reaction temperature could be obtained in the multistream reactor (maximum temperature differences are less than 1 K at 673 K). Quantification of the results was realized by combination of a gas chromatogram with the MSMSS, which could provide the product selectivities of each catalyst in a heterogeneous catalyst library. Because the catalyst loading of each reaction tube is comparable to that of the conventional microreaction system and because the parallel reactions could be operated under identical conditions (homogeneous temperature, same pressure and WHSV), the reaction results of a promising catalyst selected from the library could be reasonably applied to the further scale-up of the system. The aldol condensation of acetone, with obvious differences in the product distribution over different kind of catalysts, was selected as a model reaction to validate the screening system.

Construction and characterization of two bacterial artificial chromosome libraries of Zhikong scallop, Chlamys farreri Jones et Preston, and identification of BAC clones containing the genes involved in its innate immune system

Large-insert bacterial artificial chromosome (BAC) libraries are necessary for advanced genetics and genomics research. To facilitate gene cloning and characterization, genome analysis, and physical mapping of scallop, two BAC libraries were constructed from nuclear DNA of Zhikong scallop, Chlamys farreri Jones et Preston. The libraries were constructed in the BamHI and MboI sites of the vector pECBAC1, respectively. The BamHI library consists of 73,728 clones, and approximately 99% of the clones contain scallop nuclear DNA inserts with an average size of 110 kb, covering 8.0x haploid genome equivalents. Similarly, the MboI library consists of 7680 clones, with an average insert of 145 kb and no insert-empty clones, thus providing a genome coverage of 1.1x. The combined libraries collectively contain a total of 81,408 BAC clones arrayed in 212 384-well microtiter plates, representing 9.1x haploid genome equivalents and having a probability of greater than 99% of discovering at least one positive clone with a single-copy sequence. High-density clone filters prepared from a subset of the two libraries were screened with nine pairs of Overgos designed from the cDNA or DNA sequences of six genes involved in the innate immune system of mollusks. Positive clones were identified for every gene, with an average of 5.3 BAC clones per gene probe. These results suggest that the two scallop BAC libraries provide useful tools for gene cloning, genome physical mapping, and large-scale sequencing in the species.

Construction of bacterial artificial chromosome libraries for Zhikong Scallop Chlamys farreri

Two Large-insert genomic bacterial artificial chromosome (BAC) libraries of Zhikong scallop Chlamys farreri were constructed to promote our genetic and genomic research. High-quality megabase-sized DNA was isolated from the adductor muscle of the scallop and partially digested by BamH I and Mbo I, respectively. The BamH I library consisted of 53 760 clones while the Mbo I library consisted of 7 680clones. Approximately 96 % of the clones in BamH I library contained nuclear DNA inserts in average size of 100 kb, providing a coverage of 5.3 haploid genome equivalents. Similarly, the Mbo I library with an average insert of 145 kb and no insert-empty clones, thus providing a genome coverage of 1.1 haploid genome equivalents.

Proceedings of the Fourth PHANTOM Users Group Workshop

This Report contains the proceedings of the Fourth Phantom Users Group Workshop contains 17 papers presented October 9-12, 1999 at MIT Endicott House in Dedham Massachusetts. The workshop included sessions on, Tools for Programmers, Dynamic Environments, Perception and Cognition, Haptic Connections, Collision Detection / Collision Response, Medical and Seismic Applications, and Haptics Going Mainstream. The proceedings include papers that cover a variety of subjects in computer haptics including rendering, contact determination, development libraries, and applications in medicine, path planning, data interaction and training.

Reader development and ICT: an overview of projects in Welsh public libraries

Bird, A.,& Tedd, L. (2004). Reader development and ICT: an overview of projects in Welsh public libraries. Journal of Librarianship and Information Science, 36(4), 159-174.

E-books in academic libraries: an international overview

Tedd, L. A. (2005). E-books in academic libraries: an international overview. New Review of Academic Librarianship, 11(1), 57-79.

Digital libraries: principles and practice in a global environment

Tedd, L.A. & Large, A. (2005). Digital libraries: principles and practice in a global environment. Munich: K.G. Saur.

Evaluation of the Specialist Libraries/Communities of Practice. Report for National Library for Health

Cooper, J., Spink, S., Thomas, R. & Urquhart, C. (2005). Evaluation of the Specialist Libraries/Communities of Practice. Report for National Library for Health. Aberystwyth: Department of Information Studies, University of Wales Aberystwyth. Sponsorship: National Library for Health (NLH)