Compliance of rough cylinders in compression

Compression of a rough turned cylinder between two hard, smooth, flat plates has been analysed with the aid of a mathematical model based on statistical analysis. It is assumed that the asperity peak heights follow Gaussian or normal and beta distribution functions and that the loaded asperities comply as though they are completely isolated from the neighbouring ones. Equations have been developed for the loadcompliance relation of the real surface using a simplified relation of the form W0 = K1δn for the load-compliance of a single asperity. Parameters K1 and n have considerable influence on the load-compliance curve and they depend on the material, tip angle of the asperity, standard deviation of the asperity peak height distribution and the density of the asperities.

Aspects of tautomerism. Part IV. A kinetic study of the dimerization reaction of pseudo-acid chlorides

The kinetics of dimerization of 4-substituted- and unsubstituted o-benzoylbenzoyl chlorides, with iodide ion can be described by the expression, rate =k2[acid chloride][iodide]. The value for the reaction in dimethylformamide solution is –0·38. The entropy of activation for the reaction is –34·2 cal mol–1 K–1 and the activation energy is 10·7 kcal mol–1. These results have been interpreted as evidence for the formation of pseudo-iodide in the rate-determining step and its fast decomposition to radicals which combine to give a mixture of stereoisomeric dilactones.

Effect of interaction of macrocracks on the stress intensity factor in a beam

Beams with a central edge crack, as well as other noncentral vertical and inclined edge cracks distributed symmetrically, subjected to three-point as well as four-point bending, are analysed using the finite element technique. Values of stress intensity factor K1 at the central crack tip for a crack-to-beam depth ratio Image equal to 0.5, are calculated for various cracked-beam configurations, using the compliance calibration technique as well as method of strain energy release rate. These are compared with the value of K1 for the case of a beam with central edge crack alone. Results of the present parametric study are used to specify the range of values pertaining to basic parameters such as crack-to-beam depth ratios, geometry and position with respect to central edge crack, of other macrocracks for which interaction exists. Accordingly, the macrocracks are classified as either interacting or noninteracting types. Hence for noninteracting types of cracks, analytical expressions available for the determination of K1 in the case of beam with a central edge crack alone, are applicable.

Identification and Epidemiological Typing of Campylobacter strains isolated from Patients in Finland

C. jejuni constitutes the majority of Campylobacter strains isolated from patients in Finland, and C. coli strains are also reported. To improve the species identification, a combination of phenotype- and genotype-based methods was applied. Standardising the cell suspension turbidity in the hippurate hydrolysis test enabled the reliable identification of hippurate-positive Campylobacter strains as C. jejuni. The detection of species-specific genes by PCR showed that about 30% of the hippurate-negative strains were C. jejuni. Three typing methods, serotyping, PCR-RFLP analysis of LOS biosynthesis genes and pulsed-field gel electrophoresis (PFGE) were evaluated as epidemiological typing tools for C. jejuni. The high number of non-typeable strains lowered the discriminatory ability of serotyping. PCR-RFLP typing offered high discrimination for both serotypeable and non-typeable strains, but the correlation between serotypes and RFLP-types was not high enough to enable its use for molecular serotyping of non-typeable strains. PFGE was a highly discriminative typing method. Although the use of two restriction enzymes generally increases the discriminatory ability, KpnI alone offered almost as high discrimination as the use of SmaI and KpnI. The characteristic seasonal distribution of Campylobacter infections with a peak in summer and low incidence in winter was mainly due to domestically acquired infections. Of the C. jejuni strains, 41% were of domestic origin compared to only 17% of the C. coli strains. Serotypes Pen 12, Pen 6,7 and Pen 27 were significantly associated with domestic C. jejuni infections, Pen 1,44, Pen 3 and Pen 37 with travel-related infections. Pen 2 and Pen 4-complex were common both in domestic and travel-related infections. Serotype Pen 2 was less common among patients 60 years or older than in younger patients, more prevalent in Western Finland than in other parts of the country and more prevalent than other serotypes in winter. The source of Pen 2 infections may be related to cattle, since Pen 2 is the most common serotype in isolates from Finnish cattle. PFGE subtypes among isolates from patients and chickens during the summer 2003 and from cattle during the whole year were compared. The analysis of indistinguishable SmaI/KpnI subtypes suggested that up to 31% of the human infections may have been mediated by chickens and 19% by cattle. Human strains isolated during two one-year sampling periods were studied by PFGE. Of the domestic strains, 69% belonged to SmaI subtypes found during both sampling periods. Four SmaI subtypes accounted for 45% of the domestic strains, further typing of these subtypes by KpnI revealed six temporally persistent SmaI/KpnI subtypes. They were only occasionally identified in travel-related strains, and therefore, can be considered to be national subtypes. Each subtype was associated with a serotype: Pen 2, Pen 12, Pen 27, Pen 4-complex, Pen 41, and Pen 57. Five of these subtypes were identified in cattle (S5/K27, S7/K1, S7/K2, S7/K5 and S64/K19), and two in chickens (S7/K1 and S64/K19) with a temporal association with human infections in 2003. Cattle are more likely potential sources of these persistent subtypes, since long-term excretion of Campylobacter strains by cattle has been reported.

The variants of the protein toxins abrin and ricin A useful guide to understanding the processing events in the toxin transport

Kinetic data on inhibition of protein synthesis in thymocyte by three abrins and ricin have been obtained. The intrinsic efficiencies of A chains of four toxins to inactivate ribosomes, as analyzed by k1-versus-concentration plots were abrin II, III > ricin > abrin I. The lag times were 90, 66, 75 and 105 min at a 0.0744 nM concentration of each of abrin I, II, III and ricin, respectively. To account for the observed differences in the dose-dependent lag time, functional and structural variables of toxins such as binding efficiency of B chains to receptors and low-pH-induced structural alterations have been analyzed. The association constants obtained by stopped flow studies showed that abrin-I (4.13 × 105 M−1 s−1) association with putative receptor (4-methylumbelliferyl-α-D-galactoside) is nearly two times more often than abrin III (2.6 × 105 M−1 s−1) at 20°C. Equillibrium binding constants of abrin I and II to thymocyte at 37°C were 2.26 × 107 M−1 and 2.8 × 107 M−1 respectively. pH-induced structural alterations as studied by a parallel enhancement in 8-anilino-L-naphthalene sulfonate fluorescence revealed a high degree of qualitative similarity. These results taken with a nearly identical concentration-independent lag time (minimum lag of 41–42 min) indicated that the binding efficiencies and internalization efficiencies of these toxins are the same and that the observed difference in the dose-dependent lag time is causally related to the proposed processing event. The rates of reduction of inter-subunit disulfide bond, an obligatory step in the intoxication process, have been measured and compared under a variety of conditions. Intersubunit disulfide reduction of abrin I is fourfold faster than that of abrin II at pH 7.2. The rate of disulfide reduction in abrin I could be decreased 1 I-fold by adding lactose, compared to that without lactose. The observed differences in the efficiencies of A chains, the dose-dependent lag period, the modulating effect of lactose on the rates of disulfide reduction and similarity in binding properties make the variants a valuable tool to probe the processing events in toxin transport in detail.

Efficient Algorithms for Computing All Low s-t Edge Connectivities and Related Problems

Given an undirected unweighted graph G = (V, E) and an integer k ≥ 1, we consider the problem of computing the edge connectivities of all those (s, t) vertex pairs, whose edge connectivity is at most k. We present an algorithm with expected running time Õ(m + nk3) for this problem, where |V| = n and |E| = m. Our output is a weighted tree T whose nodes are the sets V1, V2,..., V l of a partition of V, with the property that the edge connectivity in G between any two vertices s ε Vi and t ε Vj, for i ≠ j, is equal to the weight of the lightest edge on the path between Vi and Vj in T. Also, two vertices s and t belong to the same Vi for any i if and only if they have an edge connectivity greater than k. Currently, the best algorithm for this problem needs to compute all-pairs min-cuts in an O(nk) edge graph; this takes Õ(m + n5/2kmin{k1/2, n1/6}) time. Our algorithm is much faster for small values of k; in fact, it is faster whenever k is o(n5/6). Our algorithm yields the useful corollary that in Õ(m + nc3) time, where c is the size of the global min-cut, we can compute the edge connectivities of all those pairs of vertices whose edge connectivity is at most αc for some constant α. We also present an Õ(m + n) Monte Carlo algorithm for the approximate version of this problem. This algorithm is applicable to weighted graphs as well. Our algorithm, with some modifications, also solves another problem called the minimum T-cut problem. Given T ⊆ V of even cardinality, we present an Õ(m + nk3) algorithm to compute a minimum cut that splits T into two odd cardinality components, where k is the size of this cut.

Turbulent electrical activity at sharp-edged inexcitable obstacles in a model for human cardiac tissue

Wave propagation around various geometric expansions, structures, and obstacles in cardiac tissue may result in the formation of unidirectional block of wave propagation and the onset of reentrant arrhythmias in the heart. Therefore, we investigated the conditions under which reentrant spiral waves can be generated by high-frequency stimulation at sharp-edged obstacles in the ten Tusscher-Noble-Noble-Panfilov (TNNP) ionic model for human cardiac tissue. We show that, in a large range of parameters that account for the conductance of major inward and outward ionic currents of the model fast inward Na+ current (INa), L-type slow inward Ca2+ current (I-CaL), slow delayed-rectifier current (I-Ks), rapid delayed-rectifier current (I-Kr), inward rectifier K+ current (I-K1)], the critical period necessary for spiral formation is close to the period of a spiral wave rotating in the same tissue. We also show that there is a minimal size of the obstacle for which formation of spirals is possible; this size is similar to 2.5 cm and decreases with a decrease in the excitability of cardiac tissue. We show that other factors, such as the obstacle thickness and direction of wave propagation in relation to the obstacle, are of secondary importance and affect the conditions for spiral wave initiation only slightly. We also perform studies for obstacle shapes derived from experimental measurements of infarction scars and show that the formation of spiral waves there is facilitated by tissue remodeling around it. Overall, we demonstrate that the formation of reentrant sources around inexcitable obstacles is a potential mechanism for the onset of cardiac arrhythmias in the presence of a fast heart rate.

Humanized antibody neutralizing 2009 pandemic H1N1 virus

The 2009 pandemic H1N1 S-OIV (swine origin influenza A virus) caused noticeable morbidity and mortality worldwide. In addition to vaccine and antiviral drug therapy, the use of influenza virus neutralizing monoclonal antibodies (MAbs) for treatment purposes is a viable alternative. We previously reported the isolation of a high affinity, potently neutralizing murine MAb MA2077 against 2009 pandemic H1N1 virus. We describe here the humanization of MA2077 and its expression in a mammalian cell line. Six complementarity-determining regions (CDRs) of MA2077 were grafted onto the human germline variable regions; along with six and eight back mutations in the framework of heavy and light chains, respectively, pertaining to the vernier zone and interchain packing residues to promote favorable CDR conformation and facilitate antigen binding. The full length humanized antibody, 2077Hu2, expressed in CHO-K1 cells, showed high affinity to hemagglutinin protein (K-D = 0.75 +/- 0.32 nM) and potent neutralization of pandemic H1N1 virus (IC50 = 0.17 mu g/mL), with marginally higher IC50 as compared to MA2077 (0.08 mu g/mL). In addition, 2077Hu2 also retained the epitope specificity for the ``Sa'' antigenic site on pandemic HA. To the best of our knowledge, this is the first report of a humanized neutralizing antibody against pandemic H1N1 virus.

Determinación del tamaño óptimo de la parcela experimental en el cultivo del sorgo (Sorghum bicolor (L.) Moench)

Con la finalidad de estudiar en el cultivo de sorgo (Sorghun bicolor L Moench), el tamaño óptimo de la parcela experimental considerando su costos y la mejor relación entre el tamaño de la misma, su forma y el número de repeticiones de acurdo al grado de precisión deseado, se estableció un ensayo de uniformidad en la finca El plantel del ISCA. El experimento se desarrolló entre el 20 de agosto al 23 de diciembre de 1988. Se estableció la variedad de “T-E Dinero se utilizó un tamaño de unidad básica de 2.25m2 teniendo un total de 512 unidades básicas. Para estimar el tamaño óptimo de la parcela experimental se usó el método descriptivo por Hatheway y Willams (1958) y la ley de costo descriptiva por Smith (1938), resultando un tamaño óptimo de parcela de 9.11m2 con un coeficiente de heterogeneidad de suelo de 0.41 y constantes de costos de k1-215790 y k2-0.37368 , $ u.s. Dólar por unidad básica, respectivamente. En la determinación del Número de repeticiones tomando en cuenta el tamaño de la parcela y el grado de precisión deseado, se utilizó la metodología establecida por Hatheway (1961). Se obtuvieron diferentes relaciones según el grado de significación (1y 5%) y del grado de libertas de error igual 15. Para determinar la mejor relación del tamaño y forma de la parcela experimental, se usó el método de la máxima curvatura descrito por De la loma J.L.(1966). Nuestros resultados indican que la forma no contribuye determinantemente a aumentar la precisión de los datos obtenidos.

Determinación del tamaño óptimo de la parcela experimental en maíz (Zea mays)

Este trabajo consistió en sembrar una hectárea de maíz, (variedad Salco). Para la cosecha se escogieron 56 surcos de 30 unidades básicas cada uno, resultando 1680 unidades básicas. El método que se uso fue el Hatheway y Williams (6). Para el calculo del coeficiente de regresión ponderado se usa la formula (E). El calculo de la variancia dentro de parcela y variancia entre parcela aparece en los cuadros (cuatro, cinco, seis, siete, ocho, nueve, diez y once). Para este estudio se consideraron 8 combinaciones de largo por ancho de parcela a las que se calculo los coeficientes de regresión. Para el calculo de los costos fijos y variables de un ensayo de maíz. se considero un ensayo corriente de unos doscientos datos, con los que se encontró K1=70 por ciento y K2=30 por ciento. La parcela optima resulto de 4.47 metros cuadrados excluyendo las borduras. Los coeficientes obtenidos se distribuyen siguiendo una curva parabólica.

Determinación del tamaño óptimo de la parcela experimental en ensayos de sorgo (Sorghum vulgare Pers)

En los campos experimentales de la ENAG, Nicaragua; se llevo a cabo un estudio para determinar el tamaño optimo de la parcela experimental en ensayos de sorgo (Sorghum vulgare) Pers. El experimento tuvo una duración de cinco meses comprendidos entre los meses de agosto de 1969 a enero de 1970. Se uso la variedad de sorgo granifero E-57 (Dekalb). El procedimiento experimental fue el de un ensayo de uniformidad. El tamaño de la unidad básica usada fue de 1,83 metros cuadrados, (un surco de tres metros de largo y 0,61 metros de ancho), en total son 1.024 unidades básicas. Los tamaños de parcelas estudiados se obtuvieron por combinación de las parcelas adyacentes. Dentro de cada surco se agruparon en uno, dos, cuatro, seis, ocho, 16 y 32 unidades básicas. Los datos de rendimiento se obtuvieron individualmente para cada mitad básica. Con estos resultados se uso el método de Hatheway y Williams para el análisis. El coeficiente "b" mínimo calculado fue 0,40; las constantes de costo calculadas para experimentos de sorgo, fueron K1=70,75 por ciento, K2=29,25 por ciento. Se calculo que, el tamaño optimo de la parcela es de tres metros cuadrados para experimentos sin bordes. (un surco de cinco metros de largo, 0.60 metros de ancho).

Determinación del tamaño óptimo de la unidad experimental en Ajonjolí (Sesamun spp)

En los campos experimentales de la ENAG, Nicaragua; se llevo a cabo un estudio para determinar el tamaño optimo de la parcela experimental para ensayar en Ajonjolí (Sesamum spp.). El experimento tuvo una duración de cuatro meses comprendidos entre los meses de Agosto de 1969 a Diciembre del mismo año. Se uso la variedad Mexicana. El procedimiento empleado fue un ensayo de uniformidad. El tamaño de la unidad básica usada fue de 4,57 metros cuadrados, (un surco de cinco metros de largo y 0.91 metros de ancho), en total 384 unidades básicas. Los tamaños de parcela estudiados se obtuvieron combinando las parcelas adyacentes, los tamaños estudiados fueron parcelas de 5, 10, 20 y 40 metros de largo por 12, 6, 3, y 1 surco de ancho. Los datos de rendimiento se obtuvieron individualmente para cada unidad básica. Y se analizaron usando el método H. Fairfield Smith. El coeficiente "b" se calculo por medio de una regresión lineal simple y resulto de 0,6642 las constantes de costo calculadas para experimentos en Ajonjolí fueron de K1=14,98 por ciento y K2= 85,07 por ciento. El tamaño optimo de parcela resulto de 1,50 metros cuadrados excluyendo las borduras.

Higher-order analysis of crack-tip fields in power-law hardening materials

In this paper, we present an exact higher-order asymptotic analysis on the near-crack-tip fields in elastic-plastic materials under plane strain, Mode I. A four- or five-term asymptotic series of the solutions is derived. It is found that when 1.6 < n less-than-or-equal-to 2.8 (here, n is the hardening exponent), the elastic effect enters the third-order stress field; but when 2.8< n less-than-or-equal-to 3.7 this effect turns to enter the fourth-order field, with the fifth-order field independent. Moreover, if n>3.7, the elasticity only affects the fields whose order is higher than 4. In this case, the fourth-order field remains independent. Our investigation also shows that as long as n is larger than 1.6, the third-order field is always not independent, whose amplitude coefficient K3 depends either on K1 or on both K1 and K2 (K1 and K2 arc the amplitude coefficients of the first- and second-order fields, respectively). Firmly, good agreement is found between our results and O'Dowd and Shih's numerical ones[8] by comparison.

Higher-order analysis of crack tip fields in elastic power-law hardening materials

A HIGHER-ORDER asymptotic analysis of a stationary crack in an elastic power-law hardening material has been carried out for plane strain, Mode 1. The extent to which elasticity affects the near-tip fields is determined by the strain hardening exponent n. Five terms in the asymptotic series for the stresses have been derived for n = 3. However, only three amplitudes can be independently prescribed. These are K1, K2 and K5 corresponding to amplitudes of the first-, second- and fifth-order terms. Four terms in the asymptotic series have been obtained for n = 5, 7 and 10; in these cases, the independent amplitudes are K1, K2 and K4. It is found that appropriate choices of K2 and K4 can reproduce near-tip fields representative of a broad range of crack tip constraints in moderate and low hardening materials. Indeed, fields characterized by distinctly different stress triaxiality levels (established by finite element analysis) have been matched by the asymptotic series. The zone of dominance of the asymptotic series extends over distances of about 10 crack openings ahead of the crack tip encompassing length scales that are microstructurally significant. Furthermore, the higher-order terms collectively describe a spatially uniform hydrostatic stress field (of adjustable magnitude) ahead of the crack. Our results lend support to a suggestion that J and a measure of near-tip stress triaxiality can describe the full range of near-tip states.

Papel de las GTPasas de la familia rho en la señalización mediada por el receptor P2X7

El objetivo de este proyecto es estudiar la señalización del receptor P2X7 en respuesta a ATP en macrófagos J774A.1 y en células CHO K1. Para ello, se subclonó el gen que codifica para la proteína P2X7 en el vector PMT2 HA AA. Este plásmido fue transfectado a células CHO K1, J774.A1 y HEK 293T para distintas pruebas como la movilización de calcio intracelular para comprobar si ambos tipos celulares muestran la misma señal, y además se miró la expresión de este receptor y si su activación mediada por ATP se traduce en la activación de proteínas de la familia Rho. Se ha visto que las J774A.1 expresan funcionalmente el receptor P2X7, mientras que las CHO K1 muestran una respuesta funcional diferente que no se corresponde con la clásica señalización del P2X7 asociado a la apertura del canal y posterior poro. Además, al expresar el receptor en celúlas HEK 293T, se ha visto de una manera indirecta, midiendo la fosforilación de PAK, que la ruta de rac se regula de forma positiva cuando se activa el receptor P2X7 en macrófagos.