Retention characteristics of Cu2+, Pb2+, and Zn2+ from aqueous solutions by two types of low lime fly ashes

The technical feasibility of utilization of fly ash as a low-cost adsorbent for the removal of metals from water has been studied. For two types of fly ashes, the retention capacities of copper, lead, and zinc metal ions have been studied. Contact time, initial concentration, and pH have been varied and their effect on retention mechanism has been studied. The dominant mechanisms responsible for retention are found to be precipitation due to the presence of calcium hydroxide, and adsorption due to the presence of silica and alumina oxide surfaces in the fly ash. First-order kinetic plots have revealed that the rate constant increases with increase in the initial concentration and pH. Langmuir adsorption isotherms have been plotted to study the maximum adsorption capacities for metal ions considered under different conditions. X-ray diffraction studies revealed the formation of new peaks corresponding to respective metal ions precipitates under alkaline conditions.

Lead Retention by Soils at Field Moisture Contents

The majority of studies pertaining to lead retention by clays and soils have examined the mechanisms, kinetics, and adsorption isotherms using the batch experiment technique that employs solid: water extracts of 1:10 and 1:20. Field soil deposits generally have much lower gravimetric water content ranging between 9 and 45%. Given the wide disparity in the solids: water ratio employed in the batch experiment technique and that prevailing in field deposits, this paper examines the lead retention characteristics of soils at field moisture contents (6%, 13%, and 25%) using artificially lead-contaminated soil specimens. A residually derived (i.e., formed by in-situ weathering of parent rock) red soil was used to prepare the artificially contaminated soil specimens. The impact of variations in clay content on lead retention was examined by diluting the residual soil with various amounts (0 to 60%) of river sand. Soil specimens remolded at 6 and 13% moisture contents produced very stiff to hard soils on compaction, while specimens remolded at 25% moisture content existed in the slurry state. The soil specimens were contaminated with low (30mg/kg) to high (2500mg/kg) concentrations of lead ions by remolding them with 160ppm to 10,000ppm ionic lead solutions. Lead retention by soils at field moisture contents was determined by extracting the lead from the soil using a water leach test. Experimental results showed that the bulk (71 to 99%) of the added lead was retained by the soil in insoluble form at the field moisture content. Correlations between the amount of lead retained and soil/solution parameters indicated that the amounts of Pb retained at field moisture content is a function of the initial Pb addition, total sand content, effective clay porosity, and soil pH.

Iodide Retention by Modified Kaolinite in the Context of Safe Disposal of High Level Nuclear Waste

Bentonite clay is identified as potential buffer in deep geological repositories (DGR) that store high level radioactive wastes (HLW) as the expansive clay satisfies the expected mechanical and physicochemical functions of the buffer material. In the deep geological disposal of HLW, iodine-129 is one of the significant nuclides, attributable to its long half-life (half life 1⁄4 1:7 × 107 years). However, the negative charge on the basal surface of bentonite particles precludes retention of iodide anions. To render the bentonite effective in retaining hazardous iodide species in DGR, improvement of the anion retention capacity of bentonite becomes imperative. The iodide retention capac-ity of bentonite is improved by admixing 10 and 20% Ag-kaolinite (Ag-K) with bentonite (B) on a dry mass basis. The present study produced Ag-kaolinite by heating silver nitrate-kaolinite mixes at 400°C. Marginal release of iodide retained by Ag-kaolinite occurred under extreme acidic (pH 1⁄4 2:5) and alkaline (pH 1⁄4 12:5) conditions. The swell pressure and iodide etention results of the B-Ag-K specimens bring out that mixing Ag-K with bentonite does not chemically modify the expansive clay; the mixing is physical in nature and Ag-K presence only contributes to iodide retention of the admixture. DOI: 10.1061/(ASCE)HZ.2153-5515.0000121. © 2012 American Society of Civil Engineers.

Full retention schedule in FE

Jisc Freedom of Information retention schedules Disclaimer We aim to provide accurate and current information on this website. However, we accept no liability for errors or ommissions, or for loss or damage arising from using this information. The statements made and views expressed in publications are those of the authors and do not represent in any way the views of the Service. The JISC infoNet Service offers general guidance only on issues relevant to the planning and implementation of information systems. Such guidance does not constitute definitive or legal advice and should not be regarded as a substitute therefor. The JISC infoNet Service does not accept any liability for any loss suffered by persons who consult the Service whether or not such loss is suffered directly or indirectly as a result of reliance placed on guidance given by the Service. The reader is reminded that changes may have taken place since issue, particularly in rapidly changing areas such as internet addressing, and consequently URLs and e-mail addresses should be used with caution. We are not responsible for the content of other websites linked to this site. No part of this Web site or its contents may be reproduced or distributed in any form except by bona fide UK public sector education establishments or in accordance with the provisions of the Copyright, Designs and Patents Act 1988 and any amending legislation. All reproductions require an acknowledgement of the source and the author of the work. Parties outside the education sector should contact JISC infoNet regarding use of these materials.

Experimental culture of algal balls (Cladophora sauteri). Retention of original shape [Translation from: Bull.Jap.Soc.Phycol. Vol. 10, (1), p. 23-27, 1962]

It was on July 1960 when 10 algal balls were acquired for exhibition at Suma Aquarium, Kobe. Permission to remove the specimens from the Lake Akan Reserve was given by the National Nature Reserve Committee. Algal balls, as a rule, lose their natural beauty when they are kept in an ordinary tank for a certain length of time. In an effort to retain the natural beauty it was decided to exhibit them in culture. This paper summarises the findings of this experiments with Cladophora sauteri. The author concludes that serious consideration has to be given as to the intensity of light, the sunlight, the water temperature and the nutrition for algal balls in culture in order to retain the natural beauty and shape.

A preliminary investigation of Elastomer Visible Implant (EVI)tag retention rates and the effect of tagging on the growth and survival of barbel (Barbus barbus L.).

The Elastomer Visible Implant system (EVI) is a relatively new technique for batch marking fish. The aim of this study was to assess retention rates and the possible effects of tagging on the growth and mortality of barbel, Barbus barbus, (81-197mm, fork length) over approximately 2 months using a syringe injection system.

Effect of towing speed on retention of zooplankton in bongo nets

Long-term time series of zooplankton data provide invaluable information about the fluctuations of species abundance and the stability of marine community structure. These data have demonstrated that environmental variability have a profound effect on zooplankton communities across the Atlantic basin (Beaugrand et al., 2002; Frank et al., 2005; Pershing et al., 2005). The value of these time series increases as they lengthen, but so does the likelihood of changes in sampling or processing methods. Sam-pling zooplankton with nylon nets is highly selective and biased because of mesh selectivity, net avoidance, and damage to fragile organisms. One sampling parameter that must be standardized and closely monitored is the speed of the net through the water column. Tow speed should be as fast as possible to minimize net avoid-ance by the organisms, but not so fast as to damage soft bodied zooplankters or extrude them through the mesh (Tranter et al., 1968; Anderson and Warren, 1991).

Blue Crab, Callinectes sapidus, Retention Rates in Different Trap Meshes

Percent escapements of blue crabs, Callinectes sapidus, by size and sex were determined for commercially available 38.1 mm square and hexagonal meshes and for five experimental squares. Commercial trap mesh sizes retained excessive numbers of sublegal blue crabs. Based on the criteria of maximizing sublegal crab escapement without an unacceptable loss of legal blue crabs, the 44.4 mm square (as measured from the inside of adjacent corners) was optimum and superior to either trap mesh used by fishermen.