Análise de ecossistemas aquáticos através do método input-output : estudo de caso lagoa Itapeva (sistema lagunar costeiro do Rio Grande do Sul)

A enorme complexidade dos sistemas ecológicos tem sido uma grande barreira para a compreensão e o gerenciamento da problemática ambiental. Neste sentido a modelagem matemática é uma valiosa ferramenta, devido a sua capacidade de organizar as informações disponíveis sobre estes sistemas e de fazer previsões a seu respeito para diferentes condições. Desta forma a análise de sistemas naturais vem sendo abordada de diferentes maneiras, sendo que nas últimas décadas a teoria de ecossistemas expandiu-se e ramos específicos, que permitem seguir e predizer a evolução de ecossistemas, foram formulados. Um destes enfoques, conhecido como análise do fluxo de insumo-produto, pode ser utilizado para explicar o funcionamento e estrutura dos subsistemas de um ecossistema através da descrição dos fluxos de matéria ou energia. A análise do fluxo de insumo-produto pode ser representada através de dois modelos: o modelo determinístico ou o modelo estocástico, tendo sua origem em estudos de caso com o objetivo de analisar a econômica norte-americana, sendo uma extensão prática da teoria clássica de interdependência geral. Este trabalho faz uma abordagem sintética da evolução desta análise, avaliando dados teóricos e principalmente dados referentes à Lagoa Itapeva. A análise de input-output (determinística e estocástica) com o propósito de obter informações no que diz respeito aos fluxos (matéria e energia), é bastante simples; sendo que os modelos determinísticos se prestam melhor para traçar um panorama global e para obter projeções para as variáveis já os modelos estocásticos são mais complexos, mas provêem uma descrição mais acurada. Na Lagoa Itapeva os processos determinísticos demonstraram um baixo índice de ciclagem do carbono entre os três compartimentos em estudo e o fluxo preferencial na normalização corresponde ao compartimento dos produtores primários, isto decorre de não existir loop nos compartimentos em estudo e também não existir fluxos em dois sentidos. Em relação à avaliação estocástica foram observadas uma baixa relação no sentido espacial superfície-meio-fundo da lagoa, e uma boa distribuição espacial norte-centro-sul. Quanto à distribuição temporal, foi constatada uma baixa concordância entre os dados analisados e os dados reais quanto das análises realizadas em intervalos de tempo pequeno (horas) e uma boa concordância nas medidas feitas quando o intervalo foi significativo (meses). Também em relação à Lagoa Itapeva, foi verificado nas análises estocásticas, utilizando-se operadores espaciais, que como a dinâmica biológica nem sempre é linear, os organismos não podem acompanhar imediatamente e perfeitamente as mudanças do ambiente, resultando em tempos de residência de matéria significativamente baixo. Além da análise dos fluxos ligados a este ecossistema lagunar, foram desenvolvidas técnicas de correção e adaptação de dados referentes à amostragem ocorrida na Lagoa durante um ano de campanha. Assim, propõe-se uma nova perspectiva no uso desta metodologia de forma simples e de fácil manipulação matemática.

Systemic analysis of the health sector through the input-output matrix, 2000-2005

This article provides a systemic analysis of the health sector in Brazil, based on a study of its productive structure and its interactions with the other sectors of the economy. The article draws on unpublished data on the National Health Accounts provided by the Brazilian Geographical and Statistical Institute (ibge); and it proposes a methodology for harmonizing the System of National Accounts (input-output matrix) with the Health Satellite Accounts for 2000 and 2005. This sheds light on the relations that exist between the health sector and the other sectors the economy, through input-output indicators.

Alteration of distortion product otoacoustic emission input/output functions in subjects with a previous history of middle ear dysfunction

Background: The aim of this study was to investigate the effects of sub-clinical alterations on the amplitudes and slopes of the DPOAE input-output responses from subjects with previous history of middle ear dysfunction. Material/Methods: The study included 15 subjects with and 15 subjects without a history of otitis media in the last 10 years. All participants were assessed with acoustic immittance, pure-tone audiometry, and DPOAEs. For the later, I/O functions and I/O slopes were estimated at 1501, 2002, 3174, 4004 and 6384Hz. Results: No statistically significant differences were found between the 2 groups in terms of behavioral thresholds. The group with a previous history of middle ear dysfunction presented significantly lower mean DPOAE amplitudes at 2002, 3174 and 4004 Hz. In terms of DPOAE slopes, no statistically significant differences were observed at the tested frequencies, except at 3174 Hz. Conclusions: Middle ear pathologies can produce subclinical alterations that are undetectable with traditional pure-tone audiometry. The data from the present study show that reduced amplitude DPOAEs are associated with a previous history of middle ear complications. The corresponding DPOAE slopes were affected at only 1 tested frequency, suggesting that the cochlear non-linearity is preserved. Considering these results, it remains to be elucidated to what degree the DPOAE amplitude attenuation interferes with higher-order auditory tasks.

Le tavole input-output: le tavole delle risorse ed degli impieghi (SUT)

Modulo 2: lezioni 10-12

Le tavole input-output simmetriche

Modulo 2: lezioni 18-21

Le tavole input-output Il modello delle interdipendenze

Modulo 2: Lezioni 22-24

Esempio ridotto di modello input output (dati 2000)

Modulo 2. Esempio di modello input output di complemento ai lucidi sulle TIO

Application of the Input-Output Decomposition Technique to China's Regional Economies

Structural decomposition techniques based on input-output table have become a widely used tool for analyzing long term economic growth. However, due to limitations of data, such techniques have never been applied to China's regional economies. Fortunately, in 2003, China's Interregional Input-Output Table for 1987 and Multi-regional Input-Output Table for 1997 were published, making decomposition analysis of China's regional economies possible. This paper first estimates the interregional input-output table in constant price by using an alternative approach: the Grid-Search method, and then applies the standard input-output decomposition technique to China's regional economies for 1987-97. Based on the decomposition results, the contributions to output growth of different factors are summarized at the regional and industrial level. Furthermore, interdependence between China's regional economies is measured and explained by aggregating the decomposition factors into the intraregional multiplier-related effect, the feedback-related effect, and the spillover-related effect. Finally, the performance of China's industrial and regional development policies implemented in the 1990s is briefly discussed based on the analytical results of the paper.

Evaluation of Non-Survey International IO Construction Methods with the Asian-Pacific Input-Output Table

This paper presents four non-survey methods to construct a full-information international input-output table from national IO tables and international import and export statistics, and this paper tests these four methods against the semi-survey international IO table for nine East-Asian countries and the USA, which is constructed by the Institute of Developing Economies in Japan. The tests show that the impact on the domestic flows of using self-sufficiency ratios is small, except for Singapore and Malaysia, two countries with large volumes of smuggling and transit trade. As regards the accuracy of the international flows, all methods show considerable errors, of 10%-40% for commodities and of 10%-70% for services. When more information is added, i.e. going from Method 1 to 4, the accuracy increases, except for Method 2 that generally produces larger errors than Method 1. In all, it seems doubtful whether replacing the semi-survey Asian-Pacific IO table with one of the four non-survey tables is justified, except when the semi-survey table itself is also considered to be just another estimate.

Empirical global value chain analysis in electronics and automobile industries :An application of Asian international input-output tables

This study aims to examine the international value distribution structure among major East Asian economies and the US. The mainstream trade theory explains the gains from trade; however, global value chain (GVC) approach emphasises uneven benefits of globalization among trading partners. The present study is mainly based on this view, examining which economy gains the most and which the least from the East Asian production networks. Two key industries, i.e., electronics and automobile, are our principle focus. Input-output method is employed to trace the creation and flows of value-added within the region. A striking fact is that some ASEAN economies increasingly reduce their shares of value-added, taken by developed countries, particularly by Japan. Policy implications are discussed in the final section.

Production Networks and Spatial Economic Interdependence: An International Input-Output Analysis of the Asia-Pacific Region

The Asia-Pacific Region has enjoyed remarkable economic growth in the last three decades. This rapid economic growth can be partially attributed to the global spread of production networks, which has brought about major changes in spatial interdependence among economies within the region. By applying an Input-Output based spatial decomposition technique to the Asian International Input-Output Tables for 1985 and 2000, this paper not only analyzes the intrinsic mechanism of spatial economic interdependence, but also shows how value added, employment and CO2 emissions induced are distributed within the international production networks.

Shock Transmission Mechanism of the Economic Crisis in East Asia : An Application of International Input-Output Analysis

This paper investigates the impacts of the 2008 economic crisis on industries in East Asia. By using the updated Asian international input-output table for 2008, the paper attempts to identify the transmission mechanism and the magnitude of impact of the crisis on industries in East Asia. The analyses reveal that the crisis significantly affected industrial output of the nine East Asian countries. In particular, the countries which are deeply involved in production networks were affected most seriously. Moreover, the analyses show that the impact was transmitted to East Asian industries considerably through the “triangular trade”, in which China imports parts and components from neighboring East Asian countries and then exports final products to the U.S. and EU markets.

China's regional economies and value chains : an interregional input-output analysis

Attempts to understand China’s role in global value chains have often noted the case of Apple's iPhone production, in particular the fact that the value added during the Chinese portion of the iPhone’s supply chain is no more than 4%. However, when we examine the Chinese economy as a whole in global production networks, China’s share in total induced value added by China’s exports of final products to the USA is about 75% in 2005. This leads us to investigate how Chinese value added is created and distributed not only internationally but also domestically. To elucidate the increasing complexity of China’s domestic production networks, this paper focuses on the measure of Domestic Value Chains (DVCs) across regions and their linkages with global markets. By using China’s 1997 and 2007 interregional input-output tables, we can understand in detail the structural changes in domestic trade in terms of value added, as well as the position and degree of participation of different regions within the DVCs.