Effect of Noncondensable Gases on Circulation of Primary Coolant in Nuclear Power Plants in Abnormal Situations

The present study focuses on two effects of the presence of a noncondensable gas on the thermal-hydraulic behavior of thecoolant of the primary circuit of a nuclear reactor in the VVER-440 geometry inabnormal situations. First, steam condensation with the presence of air was studied in the horizontal tubes of the steam generator (SG) of the PACTEL test facility. The French thermal-hydraulic CATHARE code was used to study the heat transfer between the primary and secondary side in conditions derived from preliminary experiments performed by VTT using PACTEL. In natural circulation and single-phase vapor conditions, the injection of a volume of air, equivalent to the totalvolume of the primary side of the SG at the entrance of the hot collector, did not stop the heat transfer from the primary to the secondary side. The calculated results indicate that air is located in the second half-length (from the mid-length of the tubes to the cold collector) in all the tubes of the steam generator The hot collector remained full of steam during the transient. Secondly, the potential release of the nitrogen gas dissolved in the water of the accumulators of the emergency core coolant system of the Loviisa nuclear power plant (NPP) was investigated. The author implemented a model of the dissolution and release ofnitrogen gas in the CATHARE code; the model created by the CATHARE developers. In collaboration with VTT, an analytical experiment was performed with some components of PACTEL to determine, in particular, the value of the release time constant of the nitrogen gas in the depressurization conditions representative of the small and intermediate break transients postulated for the Loviisa NPP. Such transients, with simplified operating procedures, were calculated using the modified CATHARE code for various values of the release time constant used in the dissolution and release model. For the small breaks, nitrogen gas is trapped in thecollectors of the SGs in rather large proportions. There, the levels oscillate until the actuation of the low-pressure injection pumps (LPIS) that refill the primary circuit. In the case of the intermediate breaks, most of the nitrogen gas is expelled at the break and almost no nitrogen gas is trapped in the SGs. In comparison with the cases calculated without taking into account the release of nitrogen gas, the start of the LPIS is delayed by between 1 and 1.75 h. Applicability of the obtained results to the real safety conditions must take into accountthe real operating procedures used in the nuclear power plant.

Application of Information Statistical Theory to the Description of the Effect of Heat Conduction on the Chemical Reaction Rate in Gases

The effect of the heat flux on the rate of chemical reaction in dilute gases is shown to be important for reactions characterized by high activation energies and in the presence of very large temperature gradients. This effect, obtained from the second-order terms in the distribution function (similar to those obtained in the Burnett approximation to the solution of the Boltzmann equation), is derived on the basis of information theory. It is shown that the analytical results describing the effect are simpler if the kinetic definition for the nonequilibrium temperature is introduced than if the thermodynamic definition is introduced. The numerical results are nearly the same for both definitions

Gotas suspensas: uma proposta para amostragem e análise de gases traços da atmosfera

In the present paper, we report on the analytical use of a dynamic droplet based gas collection and an analysis system. A droplet formed at the tip of a tube represents a sampling approach that provides an indefinitely renewable surface and uses very little reagent. Sample gas flows past the droplet at a low flow rate. After the gas was sampled , the analysis can be carried out by different methodologies. The feasibility of the sensor is demonstrated by continuos determination of gaseous as: NO2, Cl2 and SO2.

Sistema com atmosfera controlada para a caracterização de sensores a gases

This paper describes a sample holder for the electrical measurement of oxides or conducting polymers in the form of pellets or films which are used as gas sensors. The system makes it possible to control the sample temperature, the gas pressure and composition. The temperature in the sample can be changed from 25ºC to 450ºC, and the gas pressure in the chamber is controlled between 5 ¥ 10-4 and 1000 mbar. The performance of the system in resistance measurements of doped tin oxide pellets and polyaniline films deposited on platinum electrodes for methane is analyzed.

Fotodegradação de polímeros clorados irradiados com a luz síncrotron - I. Emissão de gases

Chlorinated polymers (PVC, PVDC and E-CTFE) were irradiated with white light produced at the Brazilian Synchrotron Light Source (LNLS). The emitted gases were analyzed by mass spectrometry. The spectra were dominated by peaks related to hydrochloric acid, HCl, and chlorine (35Cl). The measured HCl intensity is used to evaluate the sensitivity of the polymers over a broad energy range. PVDC showed the greatest light sensitivity as compared to PVC and E-CTFE.

Técnica para seleção de variáveis aplicada à separação de gases

This paper describes an experimental design technique, known as variables search, developed to expose the critical variables and screen out the irrelevant ones. It is easy to learn and use and clearly dissociates the main and interactions effects from each other. An example of air separation process by pressure swing adsorption was used to demonstrate how the variables search technique works. The phases of identification of the critical variables is shown, step by step,.

Catalytic gasification of glycerol in supercritical water

The conversion of glycerol in supercritical water (SCW) was studied at 510-550 °C and a pressure of 350 bars using both a bed of inert and non-porous ZrO2 particles (hydrothermal experiments), and a bed of a 1% Ru/ZrO2 catalyst. Experiments were conducted with a glycerol concentration of 5 wt% in a continuous isothermal fixed-bed reactor at a residence time between 2 and 10 s. Hydrothermolysis of glycerol formed water-soluble products such as acetaldehyde, acetic acid, hydroxyacetone and acrolein, and gases like H2, CO and CO2. The catalyst enhanced the formation of acetic acid, inhibited the formation of acrolein, and promoted gasification of the glycerol decomposition products. Hydrogen and carbon oxides were the main gases produced in the catalytic experiments, with minor amounts of methane and ethylene. Complete glycerol conversion was achieved at a residence time of 8.5 s at 510 °C, and at around 5 s at 550 °C with the 1 wt% Ru/ZrO2 catalyst. The catalyst was not active enough to achieve complete gasification since high yields of primary products like acetic acid and acetaldehyde were still present. Carbon balances were between 80 and 60% in the catalytic experiments, decreasing continuously as the residence time was increased. This was attributed partially to the formation of methanol and acetaldehyde, which were not recovered and analyzed efficiently in our set-up, but also to the formation of carbon deposits. Carbon deposition was not observed on the catalyst particles but on the surface of the inert zirconia particles, especially at high residence time. This was related to the higher concentration of acetic acid and other acidic species in the catalytic experiments, which may polymerize to form tar-like carbon precursors. Because of carbon deposition, hydrogen yields were significantly lower than expected; for instance at 550 °C the hydrogen yield potential was only 50% of the stoichiometric value.

Bioprocessos para remoção de dióxido de carbono e óxido de nitrogênio por micro-algas visando a utilização de gases gerados durante a combustão do carvão

The aim of this work was to study the removal of CO2 and NO by microalgae and to evaluate the kinetic characteristics of the cultures. Spirulina sp. showed µmax and Xmax (0.11 d-1, 1.11 g L-1 d-1) when treated with CO2 and NaNO3. The maximum CO2 removal was 22.97% for S. obliquus treated with KNO3 and atmospheric CO2. The S. obliquus showed maximum NO removal (21.30%) when treated with NO and CO2. Coupling the cultivation of these microalgae with the removal of CO2 and NO has the potential not only to reduce the costs of culture media but also to offset carbon and nitrogen emissions.

Conteúdo lipídico e composição de ácidos graxos de microalgas expostas aos gases CO2, SO2 e NO

The objective of the present work was to verify the lipid content and the fatty acid composition of the microalgae Spirulina sp., Scenedesmus obliquus, Synechococcus nidulans and Chlorella vulgaris cultivated in a medium containing CO2, SO2 and NO. The microalga Scenedesmus obliquus presented the highest lipid content (6.18%). For the other microalgae the lipid content ranged from 4.56 to 5.97%. The major monounsaturated fatty acids content was 66.01% for S. obliquus. The PUFA were obtained in major amount by the microalgae Spirulina sp. (29.37%) and S. nidulans (29.54%). The palmitoleic acid was in larger amount, with 41.02% concentration (Spirulina sp.).

Aumento da resposta analítica por meio da otimização do sistema de injeção sem divisão de fluxo em cromatografia gasosa empregando a lei dos gases ideais

This paper reports the development of an easy, fast and effective procedure for the verification of the ideal gas law in splitless injection systems in order to improve the response. Results of a group of pesticides were used to demonstrate the suitability of the approach. The procedure helps establish experimental parameters through theoretical aspects. The improved instrumental response allowed extraction with lower sample volumes, the minimization of time and costs and the simplification of sample preparation.

Avaliação do efeito de gases poluentes na corrosão metálica: um experimento para o ensino da corrosão

In this work one proposes a didactic experience to simulate atmospheric corrosion of copper and nickel, due to sulfur dioxide presence. This is an opportunity to understand some basic aspects of atmospheric corrosion, by using fundamental concepts in chemistry, reactions of extraction and characterization of pollutants, as well as their participation in corrosion process. This subject opens a space for discussion about necessity of pollutant gases emissions control for preservation of materials and the environment.

Utilização de biomassa na secagem de produtos agrícolas via gaseificação com combustão adjacente dos gases produzidos

Este estudo determinou a viabilidade do uso de um gaseificador/combustor que utiliza tocos de eucalipto, resíduos de serraria, cavacos de lenha e sabugo de milho como combustível na secagem de produtos agrícolas. Utilizou-se o gaseificador desenvolvido por SILVA (1988) com modificações na câmara de gaseificação; área da grelha reduzida de 0,21 para 0,06 m²; adição de um revestimento envolvendo a parte superior do gaseificador, e foi colocado um registro tipo borboleta na saída da câmara de combustão. O ar aquecido no combustor foi enviado para um secador que possuía câmaras metálicas que eram removíveis, içadas por um sistema de roldanas, facilitando a homogeneização da secagem. Como teste do sistema, secou-se café com umidade inicial de 54,5% bu até 11,1 ± 1,6% bu, utilizando-se de cavacos de lenha. A temperatura do ar de secagem foi de 60 ºC, pressão estática do ar na saída do ventilador de 9 mmca e velocidade de 46,3 m³ min-1. Concluiu-se que o gaseificador, usando cavacos de eucalipto como combustível, consumiu entre 15,3 e18,8 kg h-1 de biomassa, que o equipamento é viável para a secagem de café despolpado e para outros produtos agrícolas, não o impregnando de fumaça ou outras partículas, geradas nas fornalhas de fogo direto, e que todos os combustíveis de biomassa testados são viáveis na utilização do sistema via gasificação com adjacente combustão dos gases gerados.

Gases e ruídos em edificações para suínos: aplicação das normas NR-15, CIGR e ACGIH

A produção de suínos representa importante setor da economia brasileira, e a possibilidade de crescimento na produção é iminente, principalmente se considerar o baixo consumo de carne suína comparado ao de outras carnes e com outros países. As transformações e exigências de mercado que vêm ocorrendo no cenário mundial mostram que, num futuro muito próximo, as barreiras serão baseadas no bem-estar dos animais, na proteção ao meio ambiente e na legislação trabalhista. Pouco conhecimento está disponível sobre as normas relacionadas ao trabalho com agentes ambientais nas atividades rurais, assim como as condições de qualidade do ar nas instalações brasileiras. Os objetivos deste trabalho foram aplicar as principais normas relacionadas a ruído e gases, e estimar os riscos de exposição ocupacional a partir de medidas de ruído, sulfeto de hidrogênio, metano e oxigênio em granjas de suínos nas fases de creche e terminação. Os resultados mostram que os níveis de ruídos contínuos ficaram abaixo do permitido pelas normas, entretanto foram observadas diferenças (P < 0,05) em relação ao ruído medido na creche com gaiolas e em piso semi-ripado; as concentrações de sulfeto de hidrogênio e metano foram inferiores a 1 ppm e 0,1% em volume, respectivamente, inferiores aos limites recomendados pelas normas NR-15, CIGR e ACGIH, e o nível de oxigênio ficou, em média, em 21%.

Ambiência aérea em alojamento de frangos de corte: poeira e gases

A qualidade do ar em ambientes de produção animal vem sendo referenciada como ponto de interesse em estudos de sistema de controle ambiental, focando tanto a saúde dos animais que vivem em total confinamento, quanto a dos trabalhadores. O objetivo do trabalho foi determinar a variação da qualidade da ambiência aérea em dois tipos de galpões criatórios de frangos de corte: convencional (Gc) e tipo túnel (Gt). Os valores de poeira total, em ambos os galpões, ofereceram condições adequadas às aves; entretanto, as concentrações de poeira respirável no ar estiveram acima do limite recomendado para humanos. A concentração de monóxido de carbono, na fase de aquecimento, esteve acima dos 10 ppm máximos recomendados, no período avaliado, sendo superior na época de frio no galpão Gt (30 ppm), comparada ao galpão Gc (18 ppm). Os picos de concentração de amônia no ar estiveram acima dos 20 ppm máximos recomendados às aves a partir do 20º dia de produção, em ambos os galpões, e na média diária, por período superior no galpão Gt (4h30), quando comparado ao Gc (2h45). Foram encontrados apenas traços de óxido nítrico e metano, enquanto a concentração de gás carbônico, avaliada em condições diurnas, atendeu aos limites máximos permitidos, tanto para aves quanto para o trabalhador.

Índíces de conforto térmico e concentração de gases em galpões avícolas no semiárido Paraibano

Esta pesquisa teve o objetivo de determinar os índices de conforto térmico e a concentração de gases no interior de galpões avícolas e suas influencias sobre o desempenho de frangos de corte comercias, em condições de verão, na região semiárida paraibana. Utilizaram-se dois aviários, um coberto com telha de cerâmica e outro coberto com telha de fibrocimento. Observou-se que não houve diferença significativa (p > 0,05) entre a temperatura ambiente (TA), umidade relativa do ar (UR), temperatura da água de bebida (Tágua) e da cama entre os galpões, sendo que os valores médios de TA (das 8h às 17h) e UR (das 10h às 16h) podem ser considerados fora do limite da zona de termoneutralidade recomendada para frangos de corte, como também a Tágua, no período diurno, ficou acima dos limites recomendados, que é de 24 ºC. Nenhum dos aviários apresentou concentrações de gases que oferecesse insalubridade para as aves e para os trabalhadores. Apesar de a Tágua e de os índices de conforto térmico, nos horários mais quentes do dia, estarem elevados, os índices produtivos ficaram dentro do estabelecido pela indústria avícola brasileira.