Financial media, globalisation, and China’s economic integration: comparing narrative construction of the Economist and Caijing

In June 2015, legal frameworks of the Asian Infrastructural Investment Bank were signed by its 57 founding members. Proposed and initiated by China, this multilateral development bank is considered to be an Asian counterpart to break the monopoly of the World Bank and the International Monetary Fund. In October 2015, China’s Central Bank announced a benchmark interest rate cut to combat the economic slowdown. The easing policy coincides with the European Central Bank’s announcement of doubts over US Fed’s commitment to raise interest rates. Global stock markets responded positively to China’s move, with the exception of the indexes from Wall Street (Bland, 2015; Elliott, 2015). In the meantime, China’s ‘One Belt, One Road’ (or New Silk Road Economic Belt) became atopic of discourse in relation to its growing global economy, as China pledged $40 billion to trade and infrastructure projects (Bermingham, 2015). The foreign policy aims to reinforce the economic belt from western China through Central Asia towards Europe, as well as to construct maritime trading routes from coastal China through the South China Sea (Summers, 2015). In 2012, The Economist launched a new China section, to reveal the complexity of the‘meteoric rise’ of China. John Micklethwait, who was then the chief editor of the magazine, said that China’s emergence as a global power justified giving it a section of its own(Roush, 2012). In July 2015, Hu Shuli, the former chief editor of Caijing, announced the launch of a think tank and financial data service division called Caixin Insight Group, which encompasses the new Caixin China Purchasing Managers Index (PMI). Incooperation with with Markit Group, a principal global provider of PMI, the index soon became a widely cited economic indicator. One anecdote from November’s Caixin shows how much has changed: in a high-profile dialogue between Hu Shuli and Kevin Rudd, Hu insisted on asking questions in English; interestingly, the former Prime Minister of Australia insisted on replying in Chinese. These recent developments point to one thing: the economic ascent of China and its increasing influence on the power play between economics and politics in world markets. China has begun to take a more active role in rule making and enforcement under neoliberal frameworks. However, due to the country’s size and the scale of its economy in comparison to other countries, China’s version of globalisation has unique characteristics. The ‘Capitalist-socialist’ paradox is vital to China’s market-oriented transformation. In order to comprehend how such unique features are articulated and understood, there are several questions worth investigating in the realms of media and communication studies,such as how China’s neoliberal restructuring is portrayed and perceived by different types of interested parties, and how these portrayals are de-contextualised and re-contextualised in global or Anglo-American narratives. Therefore, based on a combination of the themes of globalisation, financial media and China’s economic integration, this thesis attempts to explore how financial media construct the narratives of China’s economic globalisation through the deployment of comparative and multi-disciplinary approaches. Two outstanding elite financial magazines, Britain’s The Economist, which has a global readership and influence, and Caijing, China’s leading financial magazine, are chosen as case studies to exemplify differing media discourses, representing, respectively, Anglo-American and Chinese socio-economic and political backgrounds, as well as their own journalistic cultures. This thesis tries to answer the questions of how and why China’s neoliberal restructuring is constructed from a globally-oriented perspective. The construction primarily involves people who are influential in business and policymaking. Hence, the analysis falls into the paradigm of elite-elite communication, which is an important but relatively less developed perspective in studying China and its globalisation. The comparing of characteristics of narrative construction are the result of the textual analysis of articles published over a ten-year period (mid-1998 to mid-2008). The corpus of samples come from the two media outlets’ coverage of three selected events:China becoming a member of the World Trade Organization, its outward direct investment, and the listing of stocks of Chinese companies in overseas exchanges, which are mutually exclusive in sample collection and collectively exhaustive in the inclusion of articles regarding China’s economic globalisation. The findings help to understand that, despite language, socio-economic and political differences, elite financial media with globally-oriented readerships share similar methods of and approaches to agenda setting, the evaluation of news prominence, the selection of frame, and the advocacy of deeply rooted neoliberal ideas. The comparison of their distinctive features reflects the different phases of building up the sense of identity in their readers as global elites, as well as the different economic interests that are aligned with the corresponding readerships. However, textual analysis is only relevant in terms of exploring how the narratives are constructed and the elements they include; textual analysis alone prevents us from seeing the obstacles and the constrains of the journalistic practices of construction. Therefore, this thesis provides a brief discussion of interviews with practitioners from the two media, in order to understand how similar or different narratives are manifested and perceived, how the concept of neoliberalism deviates from and is justified in the Chinese context, and how and for what purpose deviations arise from Western to Chinese contexts. The thesis also contributes to defining financial media in the domain of elite communication. The relevant and closely interlocking concepts of globalisation, elitism and neoliberalism are discussed, and are used as a theoretical bedrock in the analysis of texts and contexts. It is important to address the agenda-setting and ideological role of elite financial media, because of its narrative formula of infusing business facts with opinions,which is important in constructing the global elite identity as well as influencing neoliberal policy-making. On the other hand, ‘journalistic professionalism’ has been redefined, in that the elite identity is shared by the content producer, reader and the actors in the news stories emerging from the much-compressed news cycle. The professionalism of elite financial media requires a dual definition, that of being professional in the understanding of business facts and statistics, and that of being professional in the making sense of stories by deploying economic logic.

Learning to manage complexity through simulation: students' challenges and possible strategies

Many have called for medical students to learn how to manage complexity in healthcare. This study examines the nuances of students' challenges in coping with a complex simulation learning activity, using concepts from complexity theory, and suggests strategies to help them better understand and manage complexity.Wearing video glasses, participants took part in a simulation ward-based exercise that incorporated characteristics of complexity. Video footage was used to elicit interviews, which were transcribed. Using complexity theory as a theoretical lens, an iterative approach was taken to identify the challenges that participants faced and possible coping strategies using both interview transcripts and video footage.Students' challenges in coping with clinical complexity included being: a) unprepared for 'diving in', b) caught in an escalating system, c) captured by the patient, and d) unable to assert boundaries of acceptable practice.Many characteristics of complexity can be recreated in a ward-based simulation learning activity, affording learners an embodied and immersive experience of these complexity challenges. Possible strategies for managing complexity themes include: a) taking time to size up the system, b) attuning to what emerges, c) reducing complexity, d) boundary practices, and e) working with uncertainty. This study signals pedagogical opportunities for recognizing and dealing with complexity.

Otimização dos parâmetros de maquinagem no processo de fresagem

Cada vez mais, os principais objetivos na indústria é a produção a baixo custo, com a máxima qualidade e com o tempo de fabrico o mais curto possível. Para atingir esta meta, a indústria recorre, frequentemente, às máquinas de comando numérico (CNC), uma vez que com esta tecnologia torna se capaz alcançar uma elevada precisão e um tempo de processamento mais baixo. As máquinas ferramentas CNC podem ser aplicadas em diferentes processos de maquinagem, tais como: torneamento, fresagem, furação, entre outros. De todos estes processos, o mais utilizado é a fresagem devido à sua versatilidade. Utiliza-se normalmente este processo para maquinar materiais metálicos como é o caso do aço e dos ferros fundidos. Neste trabalho, são analisados os efeitos da variação de quatro parâmetros no processo de fresagem (velocidade de corte, velocidade de avanço, penetração radial e penetração axial), individualmente e a interação entre alguns deles, na variação da rugosidade num aço endurecido (aço 12738). Para essa análise são utilizados dois métodos de otimização: o método de Taguchi e o método das superfícies. O primeiro método foi utilizado para diminuir o número de combinações possíveis e, consequentemente, o número de ensaios a realizar é denominado por método de Taguchi. O método das superfícies ou método das superfícies de resposta (RSM) foi utilizado com o intuito de comparar os resultados obtidos com o método de Taguchi, de acordo com alguns trabalhos referidos na bibliografia especializada, o RSM converge mais rapidamente para um valor ótimo. O método de Taguchi é muito conhecido no setor industrial onde é utilizado para o controlo de qualidade. Apresenta conceitos interessantes, tais como robustez e perda de qualidade, sendo bastante útil para identificar variações do sistema de produção, durante o processo industrial, quantificando a variação e permitindo eliminar os fatores indesejáveis. Com este método foi vi construída uma matriz ortogonal L16 e para cada parâmetro foram definidos dois níveis diferentes e realizados dezasseis ensaios. Após cada ensaio, faz-se a medição superficial da rugosidade da peça. Com base nos resultados obtidos das medições da rugosidade é feito um tratamento estatístico dos dados através da análise de variância (Anova) a fim de determinar a influência de cada um dos parâmetros na rugosidade superficial. Verificou-se que a rugosidade mínima medida foi de 1,05m. Neste estudo foi também determinada a contribuição de cada um dos parâmetros de maquinagem e a sua interação. A análise dos valores de “F-ratio” (Anova) revela que os fatores mais importantes são a profundidade de corte radial e da interação entre profundidade de corte radial e profundidade de corte axial para minimizar a rugosidade da superfície. Estes têm contribuições de cerca de 30% e 24%, respetivamente. Numa segunda etapa este mesmo estudo foi realizado pelo método das superfícies, a fim de comparar os resultados por estes dois métodos e verificar qual o melhor método de otimização para minimizar a rugosidade. A metodologia das superfícies de resposta é baseada num conjunto de técnicas matemáticas e estatísticas úteis para modelar e analisar problemas em que a resposta de interesse é influenciada por diversas variáveis e cujo objetivo é otimizar essa resposta. Para este método apenas foram realizados cinco ensaios, ao contrário de Taguchi, uma vez que apenas em cinco ensaios consegue-se valores de rugosidade mais baixos do que a média da rugosidade no método de Taguchi. O valor mais baixo por este método foi de 1,03μm. Assim, conclui-se que RSM é um método de otimização mais adequado do que Taguchi para os ensaios realizados. Foram obtidos melhores resultados num menor número de ensaios, o que implica menos desgaste da ferramenta, menor tempo de processamento e uma redução significativa do material utilizado.

Comprehensive economic and financial analysis of the enterprise activity: approaches, methods and implementation

This thesis intends to analyse the performance and the efficiency of companies and to identify the key factors that may explain it. A comprehensive analysis based on a set of economic and financial ratios was studied as an instrument which provides information on enterprise performance and its efficiency. It was selected a sample with 15 enterprises: 7 Portuguese and 8 Ukrainian ones, belonging to several industries. Financial and non-financial data was collected for 6 years, during the period of 2009 to 2014. Research questions that guided this work were: Are the enterprises efficient/profitable? What factors influence enterprises’ efficiency/performance? Is there any difference between Ukrainian and Portuguese enterprises’ efficiency/performance, which factors have more influence? Which industrial sector is represented by more efficient/profitable enterprises? The main results showed that in average enterprises were efficient; comparing by states Ukrainian enterprises are more efficient; industries have similar level of efficiency. Among factors that influence ATR positively are fixed and current assets turnover ratios, ROA; negatively influencing are EBITDA margin and liquidity ratio. There is no significant difference between models by country. Concerning profitability, enterprises have low performance level but in comparison of countries Ukrainian enterprises have better profitability in average. Regarding the industry sector, paper industry is the most profitable. Among factors influencing ROA are profit margin, fixed asset turnover ratio, EBITDA margin, Debt to equity ratio and the country. In case of profitability both countries have different models. For Ukrainian enterprises is suggested to pay attention on factors of Short-term debt to total debt, ROA, Interest coverage ratio in order to be more efficient; Profit margin and EBITDA margin to make their performance better. For Portuguese enterprises for improving efficiency the observation and improvement of fixed assets turnover ratio, current assets turnover ratio, Short-term financial debt to total debt, Leverage Ratio, EBITDA margin is suggested; for improving higher profitability track fixed assets turnover ratio, current assets turnover ratio, Debt to equity ratio, Profit margin and Interest coverage ratio is suggested.

Lattice Boltzmann Modeling and Specialized Laboratory Techniques to Determine the Permeability of Megaporous Karst Rock

The Pleistocene carbonate rock Biscayne Aquifer of south Florida contains laterally-extensive bioturbated ooltic zones characterized by interconnected touching-vug megapores that channelize most flow and make the aquifer extremely permeable. Standard petrophysical laboratory techniques may not be capable of accurately measuring such high permeabilities. Instead, innovative procedures that can measure high permeabilities were applied. These fragile rocks cannot easily be cored or cut to shapes convenient for conducting permeability measurements. For the laboratory measurement, a 3D epoxy-resin printed rock core was produced from computed tomography data obtained from an outcrop sample. Permeability measurements were conducted using a viscous fluid to permit easily observable head gradients (~2 cm over 1 m) simultaneously with low Reynolds number flow. For a second permeability measurement, Lattice Boltzmann Method flow simulations were computed on the 3D core renderings. Agreement between the two estimates indicates an accurate permeability was obtained that can be applied to future studies.

Radiotherapy Does Not Impair Dentin Adhesive Properties In Head And Neck Cancer Patients.

This study evaluated the influence of radiotherapy on the dentin bond strength of teeth extracted from patients who had undergone head and neck radiotherapy. A total of 36 samples were divided into two experimental groups: group I (control group, n = 18) and group II (in vivo irradiated group, n = 18). Groups I and II were further separated into three subgroups (six specimens per subgroup), which were further assigned to the three adhesive system protocols employed: Single Bond 2 (SB) (3M ESPE), Easy Bond (EB) (3M ESPE) and Clearfil SE Bond (CSE) (Kuraray). The adhesive systems were applied to the prepared surface according to the manufacturers' instructions and restored using composite resin (Filtek Supreme, 3M ESPE). After 24 h in deionised water (37(o)C), teeth were horizontally and vertically cut to obtain beam specimens with a cross-section area of 0.8 ± 1.0 mm(2). Specimens were tested in tension using a universal testing machine at a cross-speed of 0.5 mm/min. Fracture patterns were observed under SEM. Data was analysed by two-way analysis of variance (p ≤ 0.05). No statistically significant difference was found between the irradiated (R/SB = 44.66 ± 10.12 MPa; R/EB = 41.48 ± 12.71 MPa; and R/CSE = 46.01 ± 6.98 MPa) and control group (C/SB = 39.12 ± 9.51 MPa; C/EB = 42.40 ± 6.66 MPa; and C/CSE = 36.58 ± 7.06 MPa) for any of the adhesive systems. All groups presented a predominance of mixed fracture modes. Head and neck radiotherapy did not affect dentin bond strength for the adhesive materials tested in this study.

Interplay Of Weak Interactions In The Atom-by-atom Condensation Of Xenon Within Quantum Boxes.

Condensation processes are of key importance in nature and play a fundamental role in chemistry and physics. Owing to size effects at the nanoscale, it is conceptually desired to experimentally probe the dependence of condensate structure on the number of constituents one by one. Here we present an approach to study a condensation process atom-by-atom with the scanning tunnelling microscope, which provides a direct real-space access with atomic precision to the aggregates formed in atomically defined 'quantum boxes'. Our analysis reveals the subtle interplay of competing directional and nondirectional interactions in the emergence of structure and provides unprecedented input for the structural comparison with quantum mechanical models. This approach focuses on-but is not limited to-the model case of xenon condensation and goes significantly beyond the well-established statistical size analysis of clusters in atomic or molecular beams by mass spectrometry.

Desigualdades no uso e acesso aos serviços de saúde entre idosos do município de São Paulo

OBJETIVO: Analisar os fatores relacionados à determinação e às desigualdades no acesso e uso dos serviços de saúde por idosos. MÉTODOS: Estudo integrante do Projeto Saúde, Bem-estar e Envelhecimento (SABE), no qual foram entrevistados 2.143 indivíduos com 60 anos ou mais no município de São Paulo, SP, em 2000. A amostra foi obtida em dois estágios, utilizando-se setores censitários com reposição, probabilidade proporcional à população e complementação da amostra de pessoas de 75 anos. Foi mensurado o uso de serviços hospitalares e ambulatoriais nos quatro meses anteriores à entrevista, relacionando-os com fatores de capacidade, necessidade e predisposição (renda total, escolaridade, seguro saúde, morbidade referida, auto-percepção, sexo e idade). O método estatístico utilizado foi regressão logística multivariada. RESULTADOS: Dos entrevistados, 4,7% referiram ter utilizado a internação hospitalar e 64,4% o atendimento ambulatorial. Dos atendimentos ambulatoriais em serviço público, 24,7% ocorreram em hospital e 24,1% em serviço ambulatorial; dentre os que ocorreram em serviços privados, 14,5% foram em hospital e 33,7% em clínicas. Pela análise multivariada, observou-se associação entre a utilização de serviços e sexo, presença de doenças, auto-percepção de saúde, interação da renda e escolaridade e posse de seguro saúde. A análise isolada com escolaridade apresentou efeito inverso. CONCLUSÕES: Foram observadas desigualdades no uso e acesso aos serviços de saúde e inadequação do modelo de atenção, indicando necessidade de políticas públicas que levem em conta as especificidades dessa população, facilitem o acesso e possam reduzir essas desigualdades.

DECISION TREE CLASSIFIERS FOR STAR/GALAXY SEPARATION

We study the star/galaxy classification efficiency of 13 different decision tree algorithms applied to photometric objects in the Sloan Digital Sky Survey Data Release Seven (SDSS-DR7). Each algorithm is defined by a set of parameters which, when varied, produce different final classification trees. We extensively explore the parameter space of each algorithm, using the set of 884,126 SDSS objects with spectroscopic data as the training set. The efficiency of star-galaxy separation is measured using the completeness function. We find that the Functional Tree algorithm (FT) yields the best results as measured by the mean completeness in two magnitude intervals: 14 <= r <= 21 (85.2%) and r >= 19 (82.1%). We compare the performance of the tree generated with the optimal FT configuration to the classifications provided by the SDSS parametric classifier, 2DPHOT, and Ball et al. We find that our FT classifier is comparable to or better in completeness over the full magnitude range 15 <= r <= 21, with much lower contamination than all but the Ball et al. classifier. At the faintest magnitudes (r > 19), our classifier is the only one that maintains high completeness (> 80%) while simultaneously achieving low contamination (similar to 2.5%). We also examine the SDSS parametric classifier (psfMag - modelMag) to see if the dividing line between stars and galaxies can be adjusted to improve the classifier. We find that currently stars in close pairs are often misclassified as galaxies, and suggest a new cut to improve the classifier. Finally, we apply our FT classifier to separate stars from galaxies in the full set of 69,545,326 SDSS photometric objects in the magnitude range 14 <= r <= 21.

Análise econômica comparativa de empresas de água mineral quanto ao porte

This work makes a comparative economic analysis of a small-, medium- and large-sized mineral water company, the three of which are localized in the State of Sao Paulo. All have the same lines of production such as glasses, bottles and big bottles. The analysis involves the cash flow comparison of the three companies.

Sheep rumen digestion and transmission of weedy Malva parviflora seeds

The effect of sheep digestion and mastication on Malva parviflora L. seed transmission, viability and germination was investigated. Mature M. parviflora seeds were subjected to 2 seed treatments: 'scarified', where the hard seed coat was manually cut to allow inhibition, and 'unscarified', where the hard seed coat was not cut. Seeds were placed directly into the rumen of fistulated sheep and removed at 0, 12, 24, 36 and 48 h of rumen digestion. After 12 h of in sacco exposure to digestion in the rumen, the germination of seeds that were initially scarified dropped from 99.2 to 1.4% and longer exposure periods produced no germinable seeds. In contrast, seeds that were unscarified when placed in the rumen produced over 92% germination regardless of in sacco digestion time, although manual scarification after retrieval was essential to elicit germination. In a second experiment, unscarified seeds (29000) were fed in a single meal to fistulated sheep and feces were collected at regular intervals between 6 and 120 h after feeding. Fecal subsamples were taken to determine number of seeds excreted, seed germination on agar and seed germination from feces. Major seed excretion in the feces commenced after 12 h and continued until 144 h, with peaks between 36 and 72 h after consumption. Although mastication and gut passage killed the majority of unscarified seeds, about 20% were recovered intact and over 90% of these recovered seeds were viable and could, thus, potentially form an extensive seed bank. A few excreted seeds (1%) were able to germinate directly from feces, which increased to a maximum of 10% after subsequent dry summer storage (3 months). Through information gained in this study, there is a potential to utilise livestock in an integrated weed management program for the control of M. parviflora, provided additional measures of weed control are in place such as holding periods (> 7 days) for movement of livestock from weed infested areas.

Influence of shaft design on the shaping ability of 3 nickel-titanium rotary systems by means of spiral computerized tomography

Objective. To evaluate the influence of shaft design on the shaping ability of 3 rotary nickel-titanium (NiTi) systems. Study design. Sixty curved mesial canals of mandibular molars were used. Specimens were scanned by spiral tomography before and after canal preparation using ProTaper, ProFile, and ProSystem GT rotary instruments. One-millimeter-thick slices were scanned from the apical end point to the pulp chamber. The cross-sectional images from the slices taken earlier and after canal preparation at the apical, coronal, and midroot levels were compared. Results. The mean working time was 137.22 +/- 5.15 s. Mean transportation, mean centering ratio, and percentage of area increase were 0.022 +/- 0.131 mm, 0.21 +/- 0.11, and 76.90 +/- 42.27%, respectively, with no statistical differences (P > .05). Conclusions. All instruments were able to shape curved mesial canals in mandibular molars to size 30 without significant errors. The differences in shaft designs seemed not to affect their shaping capabilities.

Dimensionamento de um secador em leito fluidizado para secagem de cereais

O objectivo desta tese é dimensionar um secador em leito fluidizado para secagem de cereais, nomeadamente, secagem de sementes de trigo. Inicialmente determinaram-se as condições de hidrodinâmica (velocidade de fluidização, TDH, condições mínimas de “slugging”, expansão do leito, dimensionamento do distribuidor e queda de pressão). Com as condições de hidrodinâmica definidas, foi possível estimar as dimensões físicas do secador. Neste ponto, foram realizados estudos relativamente à cinética da secagem e à própria secagem. Foi também estudado o transporte pneumático das sementes. Deste modo, determinaram-se as velocidades necessárias ao transporte pneumático e respectivas quedas de pressão. Por fim, foi realizada uma análise custos para que se soubesse o custo deste sistema de secagem. O estudo da secagem foi feito para uma temperatura de operação de 50ºC, tendo a ressalva que no limite se poderia trabalhar com 60ºC. A velocidade de operação é de 2,43 m/s, a altura do leito fixo é de 0,4 m, a qual sofre uma expansão durante a fluidização, assumindo o valor de 0,79 m. O valor do TDH obtido foi de 1,97 m, que somado à expansão do leito permite obter uma altura total da coluna de 2,76 m. A altura do leito fixo permite retirar o valor do diâmetro que é de 0,52 m. Verifica-se que a altura do leito expandido é inferior à altura mínima de “slugging” (1,20 m), no entanto, a velocidade de operação é superior à velocidade mínima de “slugging” (1,13 m/s). Como só uma das condições mínimas é cumprida, existe a possibilidade da ocorrência de “slugging”. Finalmente, foi necessário dimensionar o distribuidor, que com o diâmetro de orifício de 3 mm, valor inferior ao da partícula (3,48 mm), permite a distruibuição do fluido de secagem na coluna através dos seus 3061 orifícios. O inicio do estudo da secagem centrou-se na determinação do tempo de secagem. Além das duas temperaturas atrás referidas, foram igualmente consideradas duas humidades iniciais para os cereais (21,33% e 18,91%). Temperaturas superiores traduzem-se em tempos de secagem inferiores, paralelamente, teores de humidade inicial inferiores indicam tempos menores. Para a temperatura de 50ºC, os tempos de secagem assumiram os valores de 2,8 horas para a 21,33% de humidade e 2,7 horas para 18,91% de humidade. Foram também tidas em conta três alturas do ano para a captação do ar de secagem, Verão e Inverno representando os extremos, e a Meia- Estação. Para estes três casos, foi possível verificar que a humidade específica do ar não apresenta alterações significativas entre a entrada no secador e a corrente de saída do mesmo equipamento, do mesmo modo que a temperatura de saída pouco difere da de entrada. Este desvio de cerca de 1% para as humidades e para as temperaturas é explicado pela ausência de humidade externa nas sementes e na pouca quantidade de humidade interna. Desta forma, estes desvios de 1% permitem a utilização de uma razão de reciclagem na ordem dos 100% sem que o comportamento da secagem se altere significativamente. O uso de 100% de reciclagem permite uma poupança energética de cerca de 98% no Inverno e na Meia-Estação e de cerca de 93% no Verão. Caso não fosse realizada reciclagem, seria necessário fornecer à corrente de ar cerca de 18,81 kW para elevar a sua temperatura de 20ºC para 50ºC (Meia-Estação), cerca de 24,67 kW para elevar a sua temperatura de 10ºC para 50ºC (Inverno) e na ordem dos 8,90 kW para elevar a sua temperatura dos 35ºC para 50ºC (Verão). No caso do transporte pneumático, existem duas linhas, uma horizontal e uma vertical, logo foi necessário estimar o valor da velocidade das partículas para estes dois casos. Na linha vertical, a velocidade da partícula é cerca de 25,03 m/s e cerca de 35,95 m/s na linha horizontal. O menor valor para a linha vertical prende-se com o facto de nesta zona ter que se vencer a força gravítica. Em ambos os circuitos a velocidade do fluido é cerca de 47,17 m/s. No interior da coluna, a velocidade do fluido tem o valor de 10,90 m/s e a velocidade das partículas é de 1,04 m/s. A queda de pressão total no sistema é cerca de 2408 Pa. A análise de custos ao sistema de secagem indicou que este sistema irá acarretar um custo total (fabrico mais transporte) de cerca de 153035€. Este sistema necessita de electricidade para funcionar, e esta irá acarretar um custo anual de cerca de 7951,4€. Embora este sistema de secagem apresente a possibilidade de se realizar uma razão de reciclagem na ordem dos 100% e também seja possível adaptar o mesmo para diferentes tipos de cereais, e até outros tipos de materiais, desde que possam ser fluidizados, o seu custo impede que a realização deste investimento não seja atractiva, especialmente tendo em consideração que se trata de uma instalação à escala piloto com uma capacidade de 45 kgs.

Aproveitamento de águas pluviais para rega

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Hidráulica

Projeto de fundações e estrutura de ampliação de escola no Açores utilizando os eurocódigos estruturais

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Estruturas