Risk factors for the introduction and within-herd transmission of Mycobacterium avium subspecies paratuberculosis (MAP) infection in 59 Irish dairy herds

Since 1994, Irish cattle have been exposed to greater risks of acquiring Mycobacterium avium subspecies paratuberculosis (MAP) infection as a consequence of the importation of over 70,000 animals from continental Europe. In recent years, there has been an increase in the number of reported clinical cases of paratuberculosis in Ireland. This study examines the prevalence of factors that promote the introduction and within-herd transmission of Mycobacterium avium subspecies paratuberculosis (MAP) on selected Irish dairy farms in the Cork region, and the association between these factors and the results of MAP screening tests on milk sock filter residue (MFR). A total of 59 dairy farms, selected using non-random methods but apparently free of endemic paratuberculosis, were enrolled into the study. A questionnaire was used to collect data about risk factors for MAP introduction and transmission. The MFR was assessed on six occasions over 24 months for the presence of MAP, using culture and immunomagnetic separation prior to polymerase chain reaction (IMS-PCR). Furthermore, blood samples from all entire male and female animals over one year of age in 20 herds were tested by ELISA. Eighteen (31%) farms had operated as closed herds since 1994, 28 (47%) had purchased from multiple sources and 14 (24%) had either direct or indirect (progeny) contact with imported animals. Milk and colostrum were mixed on 51% of farms, while 88% of farms fed pooled milk. Thirty (51%) herds tested negative to MFR culture and IMS-PCR, 12 (20%) were MFR culture positive, 26 (44%) were IMS-PCR positive and seven (12%) were both culture and IMS-PCR positive. The probability of a positive MFR culture was significantly associated with reduced attendance at calving, and with increased use of individual calf pens and increased (but not significantly) if multiple suckling was practised. There was poor agreement between MFR culture and MFR IMS-PCR results, but moderate agreement between MFR culture and ELISA test results. This study highlights a lack of awareness among Irish dairy farmers about the effect of inadequate biosecurity on MAP introduction. Furthermore, within-herd transmission will be facilitated by traditional calf rearing and waste management practices. The findings of viable MAP in the presence of known transmission factors in non-clinically affected herds could be a prelude to long-term problems for the Irish cattle and agri-business generally.

Production and Evaluation of Antibodies and Phage Display-Derived Peptide Ligands for Immunomagnetic Separation of Mycobacterium bovis

This study describes the development and optimization of an immunomagnetic separation (IMS) method to isolate Mycobacterium bovis cells from lymph node tissues. Gamma-irradiated whole M. bovis AF2122/97 cells and ethanol-extracted surface antigens of such cells were used to produce M. bovis-speci?c polyclonal and monoclonal antibodies in rabbits and mice. They were also used to generate M. bovis-speci?c peptide ligands by phage display biopanning. The various antibodies and peptide ligands obtained were used to coat MyOne tosyl-activated Dynabeads (Life Technologies), singly or in combination, and evaluated for IMS. Initially, M. bovis capture from Middlebrook 7H9 broth suspensions (concentration range, 10 to 10⁵ CFU/ml) was evaluated by IMS combined with an M. bovis-speci?c touchdown PCR. IMS-PCR results and, subsequently, IMS-culture results indicated that the beads with greatest immunocapture capability for M. bovis in broth were those coated simultaneously with a monoclonal antibody and a biotinylated 12-mer peptide. These dually coated beads exhibited minimal capture (mean of 0.36% recovery) of 12 other Mycobacterium spp. occasionally encountered in veterinary tuberculosis (TB) diagnostic laboratories. When the optimized IMS method was applied to various M. bovis-spiked lymph node matrices, it demonstrated excellent detection sensitivities (50% limits of detection of 3.16 and 57.7 CFU/ml of lymph node tissue homogenate for IMS-PCR and IMS-culture, respectively). The optimized IMS method therefore has the potential to improve isolation of M. bovis from lymph nodes and hence the diagnosis of bovine tuberculosis.

Isolation and detection of Campylobacter jejuni from chicken fecal samples by immunomagnetic separation–PCR

Campylobacter jejuni (C. jejuni) is one of the leading causes of bacterial food-borne disease worldwide. The presence of Campylobacter in chicken feces poses a high risk for contamination of chicken meat and for Campylobacter infections in human. Detection of this bacterium in chicken fecal specimens before slaughter is therefore vital to prevent disease transmission. By combining two techniques – immunomagnetic separation (IMS) and polymerase chain reaction (PCR), this study developed a reliable and specific method for rapid detection of C. jejuni in chicken fecal samples. The specificity of the assay was assured by two selection steps: 1) Dynabeads®M-270 Amine microbeads (2.8 µm in diameter) coated with C. jejuni monoclonal antibodies were used as the primary selection to isolate bacteria from fecal samples. 2) A PCR assay amplifying the Hippuricase gene was performed as the specific selection to accurately confirm the presence of C. jejuni. Without pre-enrichment, this method was able to detect approximately 10 CFU of C. jejuni in 1 µl of spiked feces within 3 h.

Protein destabilisation by ruthenium(II) tris-bipyridine based protein-surface mimetics

Highly functionalised ruthenium(II) tris-bipyridine receptor 1 which acts as a selective sensor for equine cytochrome c (cyt c) is shown to destabilise the native protein conformation by around 25 degrees C. Receptors 2 and 3 do not exert this effect confirming the behaviour is a specific effect of molecular recognition between 1 and cyt c, whilst the absence of a destabilising effect on 60% acetylated cyt c demonstrates the behaviour of 1 to be protein specific. Molecular recognition also modifies the conformational properties of the target protein at room temperature as evidenced by ion-mobility spectrometry (IMS) and accelerated trypsin proteolysis.

Improved Detection of Mycobacterium bovis in Bovine Tissues Using Immunomagnetic Separation Approaches

Immunomagnetic separation (IMS) represents a simple but effective method of selectively capturing and concentrating Mycobacterium bovis, the causative agent of bovine tuberculosis (bTB), from tissue samples. It is a physical cell separation technique that does not impact cell viability, unlike traditional chemical decontamination prior to culture. IMS is performed with paramagnetic beads coated with M. bovis-specific antibody and peptide binders. Once captured by IMS, M. bovis cells can be detected by either PCR or cultural detection methods. Increased detection rates of M. bovis, particularly from non-visibly lesioned lymph node tissues from bTB reactor animals, have recently been reported when IMS-based methods were employed.

Evaluation of the diagnostic potential of a novel field immunomagnetic separation-immunochromatographic lateral flow assay to detect Mycobacterium bovis cells in European badger (Meles meles) faeces

The European badger (Meles meles) is a natural reservoir for Mycobacterium bovis, the causative agent of Bovine Tuberculosis, and has consequently been implicated in transmission of the disease to cattle. This study describes application of a novel M. bovis-specific immunochromatographic (lateral flow) assay in combination with immunomagnetic separation (IMS-LFD), to test badger faeces samples. In total, 441 faeces samples from badgers of unknown disease status collected from latrines at 110 badger setts throughout Northern Ireland (NI) and 100 faeces samples from badgers of known infection status from Great Britain (GB) were tested. Faeces (approx. 1g) was homogenised in 9 ml phosphate buffered saline, filtered (70 µm), and then 6-8 ml subjected to the IMS-LFD test. Residual clarified faecal homogenates were subjected to automated IMS followed by MGIT™ liquid culture (AIMS-MGIT™ culture) and qPCR (AIMS-qPCR). Evidence for the presence of M. bovis was obtained for 78 (18%), 61 (14%) and 140 (32%) of 441 NI badger faeces samples, and 10 (10%), 41 (41%) and 56 (56%) of 100 GB badger faeces samples, by IMS-LFD, AIMS-MGIT culture and AIMS-qPCR tests, respectively. The IMS-LFD test was less sensitive than AIMS-qPCR for detection of M. bovis and was, therefore, detecting badgers shedding high numbers of M. bovis in their faeces only. However, these ‘super shedders’ may be primarily responsible for the spread of Bovine Tuberculosis so are, therefore, an important target. This non-invasive test could form the basis of a field surveillance tool to indicate infected badger groups which are actively spreading M. bovis.

Avaliação do efeito de metais pesados na fertilidade do ratinho

A infertilidade é um problema actual que afecta cerca de 8 a 12% dos casais em idade fértil, sendo 50% dos casos atribuídos ao factor masculino. A exposição ocupacional e/ou ambiental a metais pesados representa uma das suas principais causas. O chumbo, o cádmio e o crómio são metais com elevada utilização industrial e muito persistentes no ambiente, sendo motivo de grande preocupação devido aos seus efeitos na saúde reprodutiva dos trabalhadores e da população em geral. Neste trabalho estudaram-se os efeitos do cloreto de chumbo (PbCl2), cloreto de cádmio (CdCl2) e cromato de potássio (K2CrO4) na fertilidade, usando como modelo ratinhos machos ICR-CD1. Os ratinhos foram injectados subcutaneamente com 74 e 100 mg de PbCl2/kg pc ou com 5 e 10 mg de K2CrO4/kg pc, respectivamente, durante 4 dias consecutivos ou com 1, 2 e 3 mg de CdCl2/kg pc numa única injecção. Nos ensaios com PbCl2 e K2CrO4 os animais foram sacrificados 5 e 35 dias após o início da exposição, enquanto que nos ensaios com CdCl2 os animais foram sacrificados após 24 horas e 35 dias. O cloreto de chumbo não alterou a histologia do testículo nem do epidídimo, mas induziu um aumento da percentagem de células em fase S no testículo. O cloreto de chumbo alterou também alguns parâmetros dos espermatozóides, tais como a motilidade, morfologia e integridade do acrossoma. Contudo, não foram observados efeitos na integridade do DNA ou na estrutura da cromatina. O cloreto de cádmio induziu lesões severas e não reversíveis nos testículos que, após 35 dias, reverteram em necrose testicular. O cloreto de cádmio alterou ainda as subpopulações de células testiculares após 24 horas e induziu IMS no testículo após 35 dias. Em consequência das lesões no testículo, a densidade espermática foi severamente afectada após 35 dias. A exposição ao cloreto de cádmio afectou também a morfologia, a motilidade e a integridade acrossómica nos espermatozóides. O cloreto de cádmio induziu ainda fragmentação do DNA nestas células após 35 dias. O cromato de potássio alterou a morfologia dos espermatozóides e a integridade do acrossoma, sobretudo nos animais sacrificados após 35 dias. Verificou-se ainda uma redução da motilidade dos espermatozóides. Não foram detectados efeitos genotóxicos nos espermatozóides, devido à acção do K2CrO4 nas doses testadas. Dos parâmetros avaliados neste trabalho, destacam-se duas novas abordagens, nomeadamente o programa informático Snakes e a análise do conteúdo em DNA de células de testículo, a partir de material incluído em parafina. O Snakes permitiu fazer medições rigorosas do diâmetro dos tubos seminíferos, enquanto que a fixação de amostras de testículo de ratinhos em formol tamponado e inclusão em parafina resultou numa boa preservação do DNA, possibilitando assim a quantificação das subpopulações de células testiculares por citometria de fluxo. Os resultados obtidos para os diferentes parâmetros testados indicam que a motilidade dos espermatozóides e a integridade do acrossoma sejam parâmetros sensíveis à toxicidade de metais. O acrossoma aparenta ser um dos principais alvos da toxicidade dos metais e cuja reacção acrossómica prematura pode reduzir a capacidade do espermatozóide para fertilizar o oócito. Assim, este trabalho representa uma contribuição para uma melhor compreensão dos efeitos do chumbo, cádmio e crómio na fertilidade masculina.

A generic model for integration of Quality, Environment and Safety Management Systems

Purpose – The purpose of this paper is to propose a generic model of Integrated Management System of Quality, Environment and Safety (IMS-QES) that can be adapted and progressively to assimilate various Management Systems, of which highlights: ISO 9001 for Quality; ISO 14001 for Environment; OHSAS 18001 for Occupational Health and Safety. Design/methodology/approach – The model was designed in the real environment of a Portuguese Organization and 160 employees were surveyed. The rate response was equal to 86 percent. The conceived model was implemented in a first phase for the integration of Quality, Environment and Safety Management Systems. Findings – Among the main findings of the survey the paper highlights: the elimination of conflicts between individual systems with resources optimization; creation of added value to the business by eliminating several types of wastes; the integrated management of sustainability components in a global market; the improvement of partnerships with suppliers of goods and services; reducing the number of internal and external audits. Originality/value – This case study is one of the first Portuguese empirical researches about IMS-QES and the paper believes that it can be useful in the creation of a Portuguese guideline for integration, namely the Quality Management Systems; Environmental Management Systems and Occupational Health and Safety Management Systems among others.

INTEGRATED MANAGEMENT SYSTEMS: CRITICAL SUCCESS FACTORS

The purpose of this paper is to, in a holistic way, identify and explore the critical success factors (CSFs) that are considered in the context of the growing discussions, movements, proposed models, and case studies about the integration of management systems (MSs). This work is an investigation focused on the integration of MSs into an integrated management system (IMS) and the proposed approach takes into account the literature review as well as the experience gained by the authors on researches about Portuguese enterprises. This qualitative and empirical research, investigated the integration of MSs from existing scientific publications for the period 1999 to 2014, on-going case studies and one inquiry conducted by the authors. This research contributes to a better understanding of the CSFs regarding the integration of MSs and thus provides an insight on the preventive management. This research shows an evident lack of information regarding case studies on CSFs for integrated management systems (IMSs) and has identified a set of relevant CSFs, for MSs integration and associated guidelines that organizations should take as a priority, in order to be able to manage, on a preventive way, the implementation of IMSs, and consequently to become more competitive with added value for the stakeholders.

Integration of Standardized Management Systems: A Dilemma?

Abstract: The growing proliferation of management systems standards (MSSs), and their individualized implementation, is a real problem faced by organizations. On the other hand, MSSs are aimed at improving efficiency and effectiveness of organizational responses in order to satisfy the requirements, needs and expectations of the stakeholders. Each organization has its own identity and this is an issue that cannot be neglected; hence, two possible approaches can be attended. First, continue with the implementation of individualized management systems (MSs); or, integrate the several MSSs versus related MSs into an integrated management system (IMS). Therefore, in this context, organizations are faced with a dilemma, as a result of the increasing proliferation and diversity of MSSs. This paper takes into account the knowledge gained through a case study conducted in the context of a Portuguese company and unveils some of the advantages and disadvantages of integration. A methodology is also proposed and presented to support organizations in developing and structuring the integration process of their individualized MSs, and consequently minimize problems that are generators of inefficiencies, value destruction and loss of competitiveness. The obtained results provide relevant information that can support Top Management decision in solving that dilemma and consequently promote a successful integration, including a better control of business risks associated to MSSs requirements and enhancing sustainable performance, considering the context in which organizations operate.

Integration of repositories in elearning systems

The wide acceptance of digital repositories today in the eLearning field raises several interoperability issues. In this paper we present the interoperability features of a service oriented repository of learning objects called crimsonHex. These features are compliant with the existing standards and we propose extensions to the IMS interoperability recommendation, adding new functions, formalizing message interchange and providing also a REST interface. To validate the proposed extensions and its implementation in crimsonHex we developed a repository plugin for Moodle 2.0 that is expected to be included in the next release of this popular learning management system.

Integrating rich learning applications in LMS

Currently, a learning management system (LMS) plays a central role in any e-learning environment. These environments include systems to handle the pedagogic aspects of the teaching–learning process (e.g. specialized tutors, simulation games) and the academic aspects (e.g. academic management systems). Thus, the potential for interoperability is an important, although over looked, aspect of an LMS. In this paper, we make a comparative study of the interoperability level of the most relevant LMS. We start by defining an application and a specification model. For the application model, we create a basic application that acts as a tool provider for LMS integration. The specification model acts as the API that the LMS should implement to communicate with the tool provider. Based on researches, we select the Learning Tools Interoperability (LTI) from IMS. Finally, we compare the LMS interoperability level defined as the effort made to integrate the application on the study LMS.