A constructive heuristic algorithm to Short Term Transmission Network Expansion Planning

In this paper a method for solving the Short Term Transmission Network Expansion Planning (STTNEP) problem is presented. The STTNEP is a very complex mixed integer nonlinear programming problem that presents a combinatorial explosion in the search space. In this work we present a constructive heuristic algorithm to find a solution of the STTNEP of excellent quality. In each step of the algorithm a sensitivity index is used to add a circuit (transmission line or transformer) to the system. This sensitivity index is obtained solving the STTNEP problem considering as a continuous variable the number of circuits to be added (relaxed problem). The relaxed problem is a large and complex nonlinear programming and was solved through an interior points method that uses a combination of the multiple predictor corrector and multiple centrality corrections methods, both belonging to the family of higher order interior points method (HOIPM). Tests were carried out using a modified Carver system and the results presented show the good performance of both the constructive heuristic algorithm to solve the STTNEP problem and the HOIPM used in each step.

Perfil antropométrico e alimentar dos escolares de 1ª a 4ª séries da rede estadual de ensino da cidade de Araraquara-SP

Pós-graduação em Alimentos e Nutrição - FCFAR

O método de pontos interiores no planejamento da radioterapia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do tratamento a plasma do politetrafluoroetileno (PTFE) nas suas propriedades eletrostáticas e superficiais

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Eletroresistividade aplicada ao estudo de água subterrânea no município de Salvaterra-Marajó-Pará

A partir de 1974, quando da implantação do Núcleo de Ciências Geofísicas e Geológicas da UFPa., começou a ser desenvolvido um estudo de água subterrânea na Ilha do Marajó, sob o titulo de Projeto Marajó, financiado pela FINEP, que visava definir e delinear aquíferos em algumas áreas piloto da ilha. Este trabalho, realizado em uma dessas áreas piloto, no município de Salvaterra, Marajó, busca determinar áreas favoráveis para exploração de água subterrânea, através do uso do método geofísico de eletroresistividade. A área, de 200 Km², foi prospectada através de 65 sondagens elétricas verticais e 6 perfilagens horizontais, tendo sido utilizado o dispositivo Schlumberger nas sondagens e o dispositivo Wenner nas perfilagens. Os dados foram inicialmente interpretados através do método do Ponto Auxiliar, quando se obteve uma visão geral do comportamento resistivo dos terrenos sondados, sendo depois reinterpretados usando técnica computacional, indicando existir na área camadas com resistividades que variam desde 5 até 43000 ohms-metro. Observou-se a existência de um pacote formado por uma sucessão de camadas que apresentaram resistividades com valores de 500 a 4000 ohms-metro, interpretado como constituído de sedimentos arenosos com água doce (aquífero), tendo uma espessura que chegou a atingir mais de 60 metros em algumas áreas. Na área pesquisada, foram delimitadas três sub-áreas cobrindo cerca de 40% da área total e, nestas, as espessuras do aquífero vão de 20 a 80 metros. As profundidades do topo desse aquífero nas três sub-áreas variam de 1,3 a 6,6 metros. A interpretação geofísica foi comprovada através de quatro furos de sondagem até 20 metros. Dois destes furos, realizados nas áreas interpretadas como bons aquíferos, mostraram terrenos mais arenosos, e os outros dois, alotados fora daquelas áreas, apresentaram uma parcela considerável de sedimentos argilosos com algum material orgânico. Informações obtidas quando do levantamento dos poços escavados na região e das análises de amostras das águas destes poços, mostram que, em termos gerais, não existem problemas quanto à qualidade das águas desses aquíferos mais superficiais, com exceção de dois poços escavados muito próximos da borda da Baía do Marajó, nas localidades de Joanes e Monsarás, que apresentam um aumento na salinidade quando no pico da estação de estio. Pelo que foi visto, o método utilizado neste trabalho é uma técnica eficiente para localizar bons aquíferos em ambientes geológicos semelhantes ao da área pesquisada.

Geofísica aplicada à prospecção de água subterrânea na área do Rio Paracauari – Ilha de Marajó - Pará

A região do Rio Paracauari apresenta sérios problemas hídricos devido o excesso de chuvas no inverno e escassez de água no verão. A indústria agropecuária, principal atividade econômica da região, sofre tremendamente durante o período de secas. Foram realizados estudos geofísicos através do método de resistividade para localizar e mapear os aquíferos rasos de boa potencialidade. Foram feitas 53 sondagens elétricas verticais, do tipo Schlumberger, e 5 perfis de resistividade do tipo Wenner. Foi utilizada a técnica do ponto auxiliar e, depois, os diagramas coletivamente foram tratados e processados no computador, para obtenção de modelos aproximados. Depois da interpretação, foi possível separar duas áreas distintas. A primeira com resistividade alta até 950 Ω.m, com predominância de areia, é constituída de excelentes aquíferos e, provavelmente, trata-se de "Paleocanais". A segunda, com resistividade baixa até 0,5 Ω.m, com predominância de sedimentos argilosos, sílticos, com água salobra. Com os mapas de resistência transversal total e de resistividade foram definidas as áreas mais favoráveis à exploração de água potável. A área favorável é somente 30% da área total. Foi feita coleta das águas rasas e superficiais da área, e suas resistividades variam de 362 Ω.m a 1,1 Ω.m. Algumas perfurações foram feitas, e vieram constatar a existência destas áreas distintas. Com isto, foram solucionados parcialmente os problemas de água de algumas fazendas como São Lourenço, Gavinho e Conceição.

Statistical Innovations Improve Prevalence Estimates of Nutrient Risk Populations: Applications in Sao Paulo, Brazil

The objective of this study was to estimate the prevalence of inadequate micronutrient intake and excess sodium intake among adults age 19 years and older in the city of Sao Paulo, Brazil. Twenty-four hour dietary recall and sociodemographic data were collected from each participant (n=1,663) in a cross-sectional study, Inquiry of Health of Sao Paulo, of a representative sample of the adult population of the city of Sao Paulo in 2003 (ISA-2003). The variability in intake was measured through two replications of the 24-hour recall in a subsample of this population in 2007 (ISA-2007). Usual intake was estimated by the PC-SIDE program (version 1.0, 2003, Department of Statistics, Iowa State University), which uses an approach developed by Iowa State University. The prevalence of nutrient inadequacy was calculated using the Estimated Average Requirement cut-point method for vitamins A and C, thiamin, riboflavin, niacin, copper, phosphorus, and selenium. For vitamin D, pantothenic acid, manganese, and sodium, the proportion of individuals with usual intake equal to or more than the Adequate Intake value was calculated. The percentage of individuals with intake equal to more than the Tolerable Upper Intake Level was calculated for sodium. The highest prevalence of inadequacy for males and females, respectively, occurred for vitamin A (67% and 58%), vitamin C (52% and 62%), thiamin (41% and 50%), and riboflavin (29% and 19%). The adjustment for the within-person variation presented lower prevalence of inadequacy due to removal of within-person variability. All adult residents of Sao Paulo had excess sodium intake, and the rates of nutrient inadequacy were high for certain key micronutrients. J Acad Nutr Diet. 2012;112:1614-1618.

TWO NEW WEAK CONSTRAINT QUALIFICATIONS AND APPLICATIONS

We present two new constraint qualifications (CQs) that are weaker than the recently introduced relaxed constant positive linear dependence (RCPLD) CQ. RCPLD is based on the assumption that many subsets of the gradients of the active constraints preserve positive linear dependence locally. A major open question was to identify the exact set of gradients whose properties had to be preserved locally and that would still work as a CQ. This is done in the first new CQ, which we call the constant rank of the subspace component (CRSC) CQ. This new CQ also preserves many of the good properties of RCPLD, such as local stability and the validity of an error bound. We also introduce an even weaker CQ, called the constant positive generator (CPG), which can replace RCPLD in the analysis of the global convergence of algorithms. We close this work by extending convergence results of algorithms belonging to all the main classes of nonlinear optimization methods: sequential quadratic programming, augmented Lagrangians, interior point algorithms, and inexact restoration.

A comparison of ground cover and frequency estimation methods for post-harvest soil monitoring

The amount and type of ground cover is an important characteristic to measure when collecting soil disturbance monitoring data after a timber harvest. Estimates of ground cover and bare soil can be used for tracking changes in invasive species, plant growth and regeneration, woody debris loadings, and the risk of surface water runoff and soil erosion. A new method of assessing ground cover and soil disturbance was recently published by the U.S. Forest Service, the Forest Soil Disturbance Monitoring Protocol (FSDMP). This protocol uses the frequency of cover types in small circular (15cm) plots to compare ground surface in pre- and post-harvest condition. While both frequency and percent cover are common methods of describing vegetation, frequency has rarely been used to measure ground surface cover. In this study, three methods for assessing ground cover percent (step-point, 15cm dia. circular and 1x5m visual plot estimates) were compared to the FSDMP frequency method. Results show that the FSDMP method provides significantly higher estimates of ground surface condition for most soil cover types, except coarse wood. The three cover methods had similar estimates for most cover values. The FSDMP method also produced the highest value when bare soil estimates were used to model erosion risk. In a person-hour analysis, estimating ground cover percent in 15cm dia. plots required the least sampling time, and provided standard errors similar to the other cover estimates even at low sampling intensities (n=18). If ground cover estimates are desired in soil monitoring, then a small plot size (15cm dia. circle), or a step-point method can provide a more accurate estimate in less time than the current FSDMP method.

Individualization of 5-fluorocytosine therapy

Using a convenient and fast HPLC procedure we determined serum concentrations of the fungistatic agent 5-fluorocytosine (5-FC) in 375 samples from 60 patients treated with this drug. The mean trough concentration (n = 127) was 64.3 mg/l (range: 11.8-208.0 mg/l), the mean peak concentration (n = 122) was 99.9 mg/l (range: 25.6-263.8 mg/l), the mean nonpeak/nontrough concentration (n = 126) was 80.1 mg/l (range: 10.5-268.0 mg/l). Totally 134 (35.7%) samples were outside the therapeutic range (25-100 mg/l), 108 (28.8%) being too high, 26 (6.9%) being too low. Forty-four (73%) patients showed 5-FC serum concentrations outside the therapeutic range at least once during the treatment course. In a prospective study we performed 65 dosage predictions on 30 patients by use of a 3-point method previously developed for aminoglycoside dosage adaptation. The mean absolute prediction error of the dosage adaptation was +0.7 mg/l (range: -26.0 to +28.0 mg/l). The root mean square prediction error was 10.7 mg/l. The mean predicted concentration (65.3 mg/l) agreed very well with the mean measured concentration (64.6 mg/l). The frequency distribution of 5-FC serum concentrations indicates that 5-FC monitoring is important. The applied pharmacokinetic method allows individual adaptations of 5-FC dosage with a clinically acceptable prediction error.

Therapeutic drug monitoring of once daily aminoglycoside dosing: comparison of two methods and investigation of the optimal blood sampling strategy.

PURPOSE Therapeutic drug monitoring of patients receiving once daily aminoglycoside therapy can be performed using pharmacokinetic (PK) formulas or Bayesian calculations. While these methods produced comparable results, their performance has never been checked against full PK profiles. We performed a PK study in order to compare both methods and to determine the best time-points to estimate AUC0-24 and peak concentrations (C max). METHODS We obtained full PK profiles in 14 patients receiving a once daily aminoglycoside therapy. PK parameters were calculated with PKSolver using non-compartmental methods. The calculated PK parameters were then compared with parameters estimated using an algorithm based on two serum concentrations (two-point method) or the software TCIWorks (Bayesian method). RESULTS For tobramycin and gentamicin, AUC0-24 and C max could be reliably estimated using a first serum concentration obtained at 1 h and a second one between 8 and 10 h after start of the infusion. The two-point and the Bayesian method produced similar results. For amikacin, AUC0-24 could reliably be estimated by both methods. C max was underestimated by 10-20% by the two-point method and by up to 30% with a large variation by the Bayesian method. CONCLUSIONS The ideal time-points for therapeutic drug monitoring of once daily administered aminoglycosides are 1 h after start of a 30-min infusion for the first time-point and 8-10 h after start of the infusion for the second time-point. Duration of the infusion and accurate registration of the time-points of blood drawing are essential for obtaining precise predictions.

Seagrass and associated benthic community data derived from field surveys at Low Isles, Great Barrier Reef, conducted July-August, 1997

The distribution of seagrass and associated benthic communities on the reef and lagoon of Low Isles, Great Barrier Reef, was mapped between the 29 July and 29 August 1997. For this survey, observers walked or free-dived at survey points positioned approximately 50 m apart along a series of transects. Visual estimates of above-ground seagrass biomass and % cover of each benthos and substrate type were recorded at each survey point. A differential handheld global positioning system (GPS) was used to locate each survey point (accuracy ±3m). A total of 349 benthic survey points were examined. To assist with mapping meadow/habitat type boundaries, an additional 177 field points were assessed and a georeferenced 1:12,000 aerial photograph (26th August 1997) was used as a secondary source of information. Bathymetric data (elevation below Mean Sea Level) measured at each point assessed and from Ellison (1997) supplemented information used to determine boundaries, particularly in the subtidal lagoon. 127.8 ±29.6 hectares was mapped. Seagrass and associated benthic community data was derived by haphazardly placing 3 quadrats (0.25m**2) at each survey point. Seagrass above ground biomass (standing crop, grams dry weight (g DW m**-2)) was determined within each quadrat using a non-destructive visual estimates of biomass technique and the seagrass species present identified. In addition, the cover of all benthos was measured within each of the 3 quadrats using a systematic 5 point method. For each quadrat, frequency of occurrence for each benthic category was converted to a percentage of the total number of points (5 per quadrat). Data are presented as the average of the 3 quadrats at each point. Polygons of discrete seagrass meadow/habitat type boundaries were created using the on-screen digitising functions of ArcGIS (ESRI Inc.), differentiated on the basis of colour, texture, and the geomorphic and geographical context. The resulting seagrass and benthic cover data of each survey point and for each seagrass meadow/habitat type was linked to GPS coordinates, saved as an ArcMap point and polygon shapefile, respectively, and projected to Universal Transverse Mercator WGS84 Zone 55 South.

A Schwarz lemma for Kahler affine metrics and the canonical potential of a proper convex cone

This is an account of some aspects of the geometry of Kahler affine metrics based on considering them as smooth metric measure spaces and applying the comparison geometry of Bakry-Emery Ricci tensors. Such techniques yield a version for Kahler affine metrics of Yau s Schwarz lemma for volume forms. By a theorem of Cheng and Yau, there is a canonical Kahler affine Einstein metric on a proper convex domain, and the Schwarz lemma gives a direct proof of its uniqueness up to homothety. The potential for this metric is a function canonically associated to the cone, characterized by the property that its level sets are hyperbolic affine spheres foliating the cone. It is shown that for an n -dimensional cone, a rescaling of the canonical potential is an n -normal barrier function in the sense of interior point methods for conic programming. It is explained also how to construct from the canonical potential Monge-Ampère metrics of both Riemannian and Lorentzian signatures, and a mean curvature zero conical Lagrangian submanifold of the flat para-Kahler space.

Environmental and Occupational Optometry. Lesson 5 (Course 2013-2014)

Tema 5. Actividad voluntaria nº 3.

Direct femtosecond laser inscription in transparent dielectrics

Since 1996 direct femtosecond inscription in transparent dielectrics has become the subject of intensive research. This enabling technology significantly expands the technological boundaries for direct fabrication of 3D structures in a wide variety of materials. It allows modification of non-photosensitive materials, which opens the door to numerous practical applications. In this work we explored the direct femtosecond inscription of waveguides and demonstrated at least one order of magnitude enhancement in the most critical parameter - the induced contrast of the refractive index in a standard borosilicate optical glass. A record high induced refractive contrast of 2.5×10-2 is demonstrated. The waveguides fabricated possess one of the lowest losses, approaching level of Fresnel reflection losses at the glassair interface. High refractive index contrast allows the fabrication of curvilinear waveguides with low bend losses. We also demonstrated the optimisation of the inscription regimes in BK7 glass over a broad range of experimental parameters and observed a counter-intuitive increase of the induced refractive index contrast with increasing translation speed of a sample. Examples of inscription in a number of transparent dielectrics hosts using high repetition rate fs laser system (both glasses and crystals) are also presented. Sub-wavelength scale periodic inscription inside any material often demands supercritical propagation regimes, when pulse peak power is more than the critical power for selffocusing, sometimes several times higher than the critical power. For a sub-critical regime, when the pulse peak power is less than the critical power for self-focusing, we derive analytic expressions for Gaussian beam focusing in the presence of Kerr non-linearity as well as for a number of other beam shapes commonly used in experiments, including astigmatic and ring-shaped ones. In the part devoted to the fabrication of periodic structures, we report on recent development of our point-by-point method, demonstrating the shortest periodic perturbation created in the bulk of a pure fused silica sample, by using third harmonics (? =267 nm) of fundamental laser frequency (? =800 nm) and 1 kHz femtosecond laser system. To overcome the fundamental limitations of the point-by-point method we suggested and experimentally demonstrated the micro-holographic inscription method, which is based on using the combination of a diffractive optical element and standard micro-objectives. Sub-500 nm periodic structures with a much higher aspect ratio were demonstrated. From the applications point of view, we demonstrate examples of photonics devices by direct femtosecond fabrication method, including various vectorial bend-sensors fabricated in standard optical fibres, as well as a highly birefringent long-period gratings by direct modulation method. To address the intrinsic limitations of femtosecond inscription at very shallow depths we suggested the hybrid mask-less lithography method. The method is based on precision ablation of a thin metal layer deposited on the surface of the sample to create a mask. After that an ion-exchange process in the melt of Ag-containing salts allows quick and low-cost fabrication of shallow waveguides and other components of integrated optics. This approach covers the gap in direct fs inscription of shallow waveguide. Perspectives and future developments of direct femtosecond micro-fabrication are also discussed.