Elasticity of substitution between capital and labor: a panel data approach

This paper estimates the elasticity of substitution of an aggregate production function. The estimating equation is derived from the steady state of a neoclassical growth model. The data comes from the PWT in which different countries face different relative prices of the investment good and exhibit different investment-output ratios. Then, using this variation we estimate the elasticity of substitution. The novelty of our approach is that we use dynamic panel data techniques, which allow us to distinguish between the short and the long run elasticity and handle a host of econometric and substantive issues. In particular we accommodate the possibility that different countries have different total factor productivities and other country specific effects and that such effects are correlated with the regressors. We also accommodate the possibility that the regressors are correlated with the error terms and that shocks to regressors are manifested in future periods. Taking all this into account our estimation resuIts suggest that the Iong run eIasticity of substitution is 0.7, which is Iower than the eIasticity that had been used in previous macro-deveIopment exercises. We show that this lower eIasticity reinforces the power of the neoclassical mo deI to expIain income differences across countries as coming from differential distortions.

The position effect of structural Eucalyptus round timber on the flexural modulus of elasticity

A madeira roliça possui grande emprego nas construções civis, desempenhando a função de vigas, colunas, fundações, postes para distribuição de energia elétrica, entre outras, apresentando a vantagem de não ser processada, como é o caso da madeira serrada. O projeto envolvendo elementos roliços requer, além de outras variáveis estruturais, o conhecimento do módulo de elasticidade. No Brasil, os documentos normativos que tratam da determinação das propriedades de rigidez e resistência para peças roliças de madeira estão em vigência há mais de vinte anos sem revisão técnica. A madeira roliça, por geralmente possuir eixo com curvatura não nula, pode apresentar, segundo a posição da peça no ensaio de flexão, valores diferentes do módulo de elasticidade. Este trabalho tem como objetivo analisara influência da posição de peças roliças de madeira de Eucalyptus grandis na determinação do módulo de elasticidade na flexão. O ensaio de flexão utilizado é o de três pontos, sendo cada peça avaliada em duas posições distintas, definidas mediante o giro da seção transversal em torno do eixo. Os resultados encontrados indicam a necessidade do ensaio de flexão em, pelo menos, duas posições distintas da peça.

Climate and acute/subacute paracoccidioidomycosis in a hyper-endemic area in Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hyper abundant mesopredators and bird extinction in an Atlantic forest island

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of a hyper-diverse seed dispersal network: modularity and underlying mechanisms

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of thermocycling on bond strength and elasticity of 4 long-term soft denture liners

Statement of problem. Two problems found in prostheses with soft liners are bond failure to the acrylic resin base and loss of elasticity due to material aging.Purpose. This in vitro study evaluated the effect of thermocycling on the bond strength and elasticity of 4 long-term soft denture liners to acrylic resin bases.Material and methods. Four soft lining materials (Molloplast-B, Flexor, Permasoft, and Pro Tech) and 2 acrylic resins (Classico, and Lucitone 199) were processed for testing according to manufacturers' instructions. Twenty rectangular specimens (10 X 10-mm(2) cross-sectional area) and twenty cylinder specimens (12.7-mm diameter X 19.0-mm height) for each liner/resin combination were used for the tensile and deformation tests, respectively. Specimen shape and liner thickness were standardized. Samples were divided into a test group that was thermocycled 3000 times and a control group that was stored for 24 hours in water at 37degreesC. Mean bond strength, expressed in megapascals (Wa), was determined in the tensile test with the use of a universal testing machine at a crosshead speed of 5 mm/min. Elasticity, expressed as percent of permanent deformation, was calculated with an instrument for measuring permanent deformation described in ADA/ANSI specification 18. Data from both tests were examined with 1-way analysis of variance and a Tukey test, with calculation of a Scheffe interval at a 95% confidence level.Results. In the tensile test under control conditions, Molloplast-B (1.51 +/- 0.28 MPa [mean SD]) and Pro Tech (1.44 +/- 0.27 MPa) liners had higher bond strength values than the others (P < .05). With regard to the permanent deformation test, the lowest values were observed for Molloplast-B (0.48% +/- 0.19%) and Flexor (0.44% +/- 0.14%) (P < .05). Under thermocycling conditions, the highest bond strength occurred with Molloplast-B (1.37 +/- 0.24 MPa) (P < .05) With regard to the deformation test, Flexor (0.46% +/- 0.13%) and Molloplast-B (0.44% +/- 0.17%) liners had lower deformation values than the others (P < .05).Conclusion. The results of this in vitro study indicated that bond strength and permanent deformity values of the 4 soft denture liners tested varied according to their chemical composition. These tests are not completely valid for application to dental restorations because the forces they encounter are more closely related to shear and tear. However, the above protocol serves as a good method of investigation to evaluate differences between thermocycled and control groups.

THEORY OF ELASTICITY OF THE ABRIKOSOV FLUX-LINE LATTICE FOR UNIAXIAL SUPERCONDUCTORS - PARALLEL FLUX LINES

In this paper, we consider the extension of the Brandt theory of elasticity of the Abrikosov flux-line lattice for a uniaxial superconductor for the case of parallel flux lines. The results show that the effect of the anisotropy is to rescale the components of the wave vector k and the magnetic field and order-parameter wave vector cut off by a geometrical parameter previously introduced by Kogan.

Effects of Short-term Hyper- and Hypoprolactinaemia on Hormones of the Pituitary, Gonad and -Thyroid Axis and on Semen Quality in Male Beagles

Effects of a short-term hyper- and hypoprolactinaemia on serum concentrations of LH, testosterone and semen quality in six male Beagles were investigated. Blood samples were collected at 3-day intervals for 12 weeks. The time span was divided into five 3-week periods: pre-treatment, metoclopramide (MCP) treatment (0.2 mg/kg orally three times daily), cabergoline (CAB) treatment (5 mu g/kg orally once daily), post-treatment 1 and post-treatment 2. In the latter, only semen characteristics were evaluated. Semen parameters were analyzed once per week during the whole 15-week investigation time. At the end of each period, the effects of a single intravenous injection of thyrotropin-releasing hormone (TRH; 10 mu g/kg) on the secretion of prolactin (PRL), LH, testosterone, thyroid-stimulating hormone and thyroxine (T4) were investigated. Pre-treatment serum PRL concentration increased under MCP (p < 0.05), followed by a decrease under CAB administration (p < 0.05). Luteinizing hormone and testosterone concentrations were not affected. Except for straight-line sperm velocity, semen quality did not differ between collection periods. A single iv TRH injection induced a significant PRL increase at 20 min in all experimental periods except during CAB treatment. Luteinizing hormone and testosterone did not show clear TRH-related changes. Basic T4 levels were significantly reduced after CAB treatment ( p < 0.05). The results of the present study demonstrate that MCP-induced short-term hyperprolactinaemia in male beagles does not seriously affect the hypothalamo-pituitary axis and semen quality.

Influence of Wood Moisture Content on the Modulus of Elasticity in Compression Parallel to the Grain

Brazilian Standard ABNT NBR7190:1997 for timber structures design, adopts a first degree equation to describe the influence of wood moisture content. Periodically, when necessary, the referred standard is revised in order to analyze inconsistencies and to adopt considerations according new realities verified. So, the present paper aims to examine the adequacy of its equation which corrects to 12% of moisture the values of rigidity properties obtained on experimental tests. To quantify the moisture influence on modulus of elasticity, it was applied tests of compression parallel to the grain for six specimens of different strength classes, considering nominal moisture of 12; 20; 25; 30%. As results, modulus of elasticity in the moisture range 25-30% showed statistically equivalents, and was obtained a first degree equation to correlate the studied variables which leads to statically equivalent estimations when compared with results by ABNT NBR7190:1997 equation. However, it was indicated to maintain the current expression for the next text of the referred document review, without prejudice to statistical significance of the estimates.

Clinical assessment of ethinylestradiol and cyproterone acetate in menstrual irregularities of hyper-androgenic origin

We report on the results of a double-blind, randomized, controlled clinical trial comparing two preparations of ethinylestradiol and cyproterone acetate in the treatment of women of reproductive age presenting menstrual irregularities of hyper-androgenic origin. After obtaining informed consent, subjects were randomized to a 4-month treatment period consisting of one daily dose of 0.035mg ethinylestradiol + 2mg cyproterone acetate. The treatment regimen cycle consisted of one pill, once daily for 21 days, followed by a 7-day pill-free period. We compared the efficacy of two presentations of the drug combination after each treatment cycle (Visits 2, 3, 4, and 5) in establishment and maintenance of menstrual regulation, intensity of menstrual flow, and dysmenorrhea, as well as a comparison of the two presentations in terms of Global Satisfaction and Drug Satisfaction assessments performed by the patients and the investigating physician. At each study visit, drug compliance and use of concomitant medications, as well as incidence, severity and duration of adverse events were recorded. A total of 86 subjects were randomized to treatment, with 43 subjects in each treatment group. At Visit 2 and each subsequent visit, all patients in both treatment groups reported an episode of withdrawal bleeding during the 7-day hormone-free period. We observed a statistically significant (p<0.0001) decrease in the incidence of dysmenorrhea at each study visit in relation to the pretreatment assessment. There was a significant reduction (p<0.0001) in the number of subjects reporting intermenstrual bleeding at each study visit in both treatment groups. Global Satisfaction scores by the patient and physician increased significantly at each successive study visit in both treatment groups. There were no clinically significant changes in vital signs, weight, and body mass index throughout the study period in either group. The number of subjects reporting adverse events at each visit did not vary between treatment groups. The combined oral contraceptive pill containing ethinylestradiol and cyproterone acetate was found to be both effective and safe in the menstrual irregularities of hyper-androgenic origin (amenorrhea, dysmenorrhea, and intermenstrual bleeding) assessed in this study. © Copyright Moreira Jr. Editora. Todos os direitos reservados.

Price elasticity of Central American agricultural exports

Includes bibliography

Stability of nonlinear system using takagi-sugeno fuzzy models and hyper-rectangle of LMIs

This paper presents a theorem based on the hyper-rectangle defined by the closed set of the time derivatives of the membership functions of Takagi-Sugeno fuzzy systems. This result is also based on Linear Matrix Inequalities and allows the reduction of the conservatism of the stability analysis in the sense of Lyapunov. The theorem generalizes previous results available in the literature. © 2013 Brazilian Society for Automatics - SBA.

The Influence of Small Quantities of Oxygen in the Structure, Microstructure, Hardness, Elasticity Modulus and Cytocompatibility of Ti-Zr Alloys for Dental Applications

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analysis of the biomechanical behavior of short implants: the photo-elasticity method

The aim of this study was to analyze the stress distribution of short implants supporting single unit or splinted crowns by the photo-elasticity method. Four photo-elastic models were produced: A (3.75×7mm); B (3.75×7mm, 3.75×7mm and 3.75×7mm); C (3.75×10mm, 3.75×7mm and 3.75×7mm); D (3.75×13mm, 3.75×7mm and 3.75×7mm). The prostheses were made with Ni-Cr alloy. A load of 100N in the axial and oblique directions was applied, totaling 380 applications, individually capturing their images in each model. The data were randomized and analyzed qualitatively and quantitatively by 2 examiners. The oblique loading was significantly more damaging. The increase in length was favorable for stress distribution (p<0.05). The splinting was beneficial for the transmission of stresses mainly (p<0.05). The splinting of the crowns, as well as increasing the length of the first implant and axial loading was most beneficial in the stress distribution. Short splinted implants behaved better than single unit implants. Increasing of the length of the first implant significantly improved the stress distribution in all analyzed situations.