PV systems linked to the grid: parameter identification with a heuristic procedure

This paper focuses on a PV system linked to the electric grid by power electronic converters, identification of the five parameters modeling for photovoltaic systems and the assessment of the shading effect. Normally, the technical information for photovoltaic panels is too restricted to identify the five parameters. An undemanding heuristic method is used to find the five parameters for photovoltaic systems, requiring only the open circuit, maximum power, and short circuit data. The I–V and the P–V curves for a monocrystalline, polycrystalline and amorphous photovoltaic systems are computed from the parameters identification and validated by comparison with experimental ones. Also, the I–V and the P–V curves under the effect of partial shading are obtained from those parameters. The modeling for the converters emulates the association of a DC–DC boost with a two-level power inverter in order to follow the performance of a testing commercial inverter employed on an experimental system.

Adductor policis muscle: a new anthropometric parameter

PURPOSE: To measure the thickness of adductor pollicis muscle in healthy adults. This measurement will be used as a nutritional anthropometric parameter in further studies. SUBJECTS AND METHOD: Four hundred and twenty-one healthy adults were studied, 209 men and 212 women, with ages ranging from 18 to 87 years, living in Rio de Janeiro. The adductor pollicis muscle was also studied in the human anatomy lab as well as in normal healthy volunteers using CAT scans and nuclear magnetic resonance imaging to ensure that only the adductor pollicis was included in measurement of muscle thickness with a Lange caliper. To standardize the measurement, the methodology was detailed, with subjects sitting with the dominant hand dangling over the homolateral thigh and the elbow bent at approximately a 90° angle. The Lange caliper was applied at a pressure of 10 g/mm², pinching the adductor pollicis muscle at the vertex of an imaginary angle between the thumb and the index finger. The average of 3 consecutive measurements was considered to be the muscle thickness. RESULTS: This study provides the first estimates of adductor pollicis thickness in normal healthy subjects as an anthropometric parameter. The normal values in the dominant hand for men were 12.5 ± 2.8 mm (mean ± SD), median 12 mm, and for women were 10.5 ± 2.3 mm, median 10 mm.

Simulation of humidity fields in concrete: experimental validation and parameter estimation

The moisture content in concrete structures has an important influence in their behavior and performance. Several vali-dated numerical approaches adopt the governing equation for relative humidity fields proposed in Model Code 1990/2010. Nevertheless there is no integrative study which addresses the choice of parameters for the simulation of the humidity diffusion phenomenon, particularly in concern to the range of parameters forwarded by Model Code 1990/2010. A software based on a Finite Difference Method Algorithm (1D and axisymmetric cases) is used to perform sensitivity analyses on the main parameters in a normal strength concrete. Then, based on the conclusions of the sensi-tivity analyses, experimental results from nine different concrete compositions are analyzed. The software is used to identify the main material parameters that better fit the experimental data. In general, the model was able to satisfactory fit the experimental results and new correlations were proposed, particularly focusing on the boundary transfer coeffi-cient.

Parameter identification of the fermentative production of fructo-oligosaccharides by Aureobasidium pullulans

In this study, a mathematical model for the production of Fructo-oligosaccharides (FOS) by Aureobasidium pullulans is developed. This model contains a relatively large set of unknown parameters, and the identification problem is analyzed using simulation data, as well as experimental data. Batch experiments were not sufficiently informative to uniquely estimate all the unknown parameters, thus, additional experiments have to be achieved in fed-batch mode to supplement the missing information. © 2015 IEEE.

Modellierung und Simulation polydisperser Wassernebel in der Brandbekämpfung unter Berücksichtigung stochastischer Parameter

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2011

Entwicklung einer Impulsmethode zur Ermittlung thermodynamischer und reaktionskinetischer Parameter in der heterogenen Katalyse

Heterogeneous catalysis, homogeneous catalysis, adsorption equilibrium, reaction kinetics, impulse method, hydrolysis of methyl formate, production of formic acid

mögliche Rolle CGRP-immunreaktiver thalamo-amygdalärer Projektionen bei der durch Emotionen hervorgerufenen Veränderung vegetativer Parameter

CGRP amygdala thalamus fear blood pressure heart rate body temperature telemetry tracing projections

Klinische Parameter und Laborprofile bei der Abklärung des Verdachts auf eine Heparin-induzierte Thrombozytopenie (HIT) Typ II bei Patienten nach herzchirurgischen Eingriffen

Magdeburg, Univ., Med. Fak., Diss., 2012

Anwendung des EM-Algorithmus zur Schätzung der Parameter von Fluoreszenzlebensdauerfunktionen

Die Bachelorarbeit behandelt die Schätzung der Parameter von Fluoreszenzlebensdauerfunktionen mit Hilfe des EM-Algorithmus. Dabei wird der Algorithmus sowohl auf simulierte als auch auf gemessene Daten angewandt. Die Schätzung der Parameter erfolgt zunächst global für die gesamte Probe mit Hilfe eines Simplex-Verfahrens, um dann das Verhältnis der Komponenten der Fluoreszenzlebensdauer, also die Wahrscheinlichkeit, mit der ein Photon von einer Komponente stammt, für jedes Pixel eines Bildes durch den EM-Algorithmus zu bestimmen. Die Messungen liegen als Anzahl der gemessenen Photonen in diskreten Zeitintervallen vor, dabei fehlt jedoch die Information, wie viele der Photonen in einem der Intervalle zu einer Komponente gehören. Durch die Nutzung bedingter Erwartungswerte ist der EM-Algorithmus in der Lage, ohne Verzerrung mit diesen unbekannten Daten umzugehen. Weiterhin wird die Schätzung dadurch erschwert, dass die Daten durch Faltung der Fluoreszenzlebensdauerfunktion mit einer so genannten Apparatefunktion zustandekommen und das Modell somit sehr komplex wird. Auch für dieses Problem wird im Laufe der Arbeit eine Lösung vorgestellt.

Optimal experimental design for parameter identification and model selection

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2014

Untersuchungen zur Perzeption musikalischer Parameter von Cochlea-Implantat-Trägern mit den Sprachkodierungsstrategien ACE und MP3000 im Vergleich zu normalhörenden Probanden

Magdeburg, Univ., Med. Fak., Diss., 2014

The fishes of the fresh waters of Panama, by Seth E. Meek and Samuel F. Hildebrand.

v.10:no.15(1916)

A synoptic list of the fishes known to occur within fifty miles of Chicago, by S. E. Meek and S. F. Hildebrand.

Fieldiana Zoology v.7, no. 9

The marine fishes of Panama. by Seth E. Meek and Samuel F. Hildebrand ; Wilfred H. Osgood, editor

v.15:pt.3(1928)

The marine fishes of Panama. by Seth E. Meek and Samuel F. Hildebrand.

v.15:pt.1(1923)