Sediments in arctic sea ice - entrainment, characterization and quantification

Sediments in Arctic sea ice are important for erosion and redistribution and consequently a factor for the sediment budget of the Arctic Ocean. The processes leading to the incorporation of sediments into the ice are not understood in detail yet. In the present study, experiments on the incorporation of sediments were therefore conducted in ice tanks of The Hamburg Ship Model Basin (HSVA) in winter 1996/1997, These experiments showed that on average 75 % of the artificial sea-ice sediments were located in the brine-channel system. The sediments were scavenged from the water column by frazil ice. Sediments functioning as a nucleus for the formation of frazil ice were less important for the incorporation. Filtration in grease ice during relatively calm hydrodynamic conditions was probably an effective process to enrich sediments in the ice. Wave fields did not play an important role for the incorporation of sediments into the artificial sea ice. During the expedition TRANSDRIFT III (TDIII, October 1995), different types of natural, newly-formed sea ice (grease ice, nilas and young ice) were sampled in the inner Laptev Sea at the time of freeze-up. The incorporation of sediments took place during calm meteorological conditions then. The characteristics of the clay mineral assemblages of these sedirnents served as references for sea-ice sediments which were sampled from first-year drift ice in the outer Laptev Sea and the adjacent Arctic Ocean during the POLARSTERN expedition ARK-XI/1 (July-September 1995). Based on the clay mineral assemblages, probable incorporation areas for the sedirnents in first-year drift ice could be statistically reconstructed in the inner Laptev Sea (eastern, central, and Western Laptev Sea) as well as in adjacent regions. Comparing the amounts of particulate organic carbon (POC) in sea-ice sediments and in surface sediments from the shelves of potential incorporation areas often reveals higher values in sea-ice sediments (TDIII: 3.6 %DM; ARK-XI/1: 2.3 %DM). This enrichment of POC is probably due to the incorporation process into the sea ice, as could be deducted from maceral analysis and Rock-Eval pyrolysis. Both methods were applied in the present study to particulate organic material (POM) from sea-ice sediments for the first time. It was shown that the POM of the sea-ice sediments from the Laptev Sea and the adjacent Arctic Ocean was dominated by reworked, strongly fragmented, allochthonous (terrigenous) material. This terrigenous component accounted for more than 75 % of all counted macerals. The autochthonous (marine) component was also strongly fragmented, and higher in the sediments from newly-formed sea ice (24 % of all counted macerals) as compared to first-year drift ice (17 % of all counted macerals). Average hydroge indices confirmed this pattern and were in the transition zone between kerogen types II and III (TDIII: 275 mg KW/g POC; ARK-XI/1: 200 mg KW/g POC). The sediment loads quantified in natural sea ice (TDIII: 33.6 mg/l, ARK-XI/1: 49.0 mg/l) indicated that sea-ice sediments are an important factor for the sediment budget in the Laptev Sea. In particular during the incorporation phase in autumn and early winter, about 12 % of the sediment load imported annually by rivers into the Laptev Sea can be incorporated into sea ice and redistributed during calm meteorological conditions. Single entrainment events can incorporate about 35 % of the river input into the sea ice (ca. 9 x 10**6 t) and export it via the Transpolar Drift from the Eurasian shelf to the Fram Strait.

Dinámicas de ocupación urbana del Anillo Verde metropolitano, desde sus orígenes en el Plan General del Área Metropolitana de Madrid de 1963 hasta el Plan General de Ordenación Urbana de 1997

El Anillo Verde metropolitano, definido por el Plan General de Ordenación Urbana del Área Metropolitana de Madrid en 1963 siguiendo los modelos planteados por la cultura urbanística internacional, como armadura de la estructura urbana del AMM, espacio protagonista dentro del sistema de espacios libres, lugar de uso público destinado al recreo y contacto con la naturaleza de la población madrileña, se convierte en realidad en una reserva de suelo que va entrando en juego motivado por las alianzas entre el poder institucional y la clase social dominante actuando al margen del planeamiento, poniendo en evidencia la escasez de recursos legales y culturales disponibles para la salvaguarda de los intereses comunes y, donde los condicionantes geográficos y naturales del territorio madrileño han influido decisivamente en la especialización funcional y espacial del Área Metropolitana de Madrid. Así pues considerando esta idea como HIPÓTESIS, el objetivo de la TESIS sería demostrarla, para lo cual se hace necesario primero, acotar espacial y temporalmente el objeto de estudio, es decir, del Anillo Verde metropolitano1, segundo, contextualizar histórica y disciplinarmente los presupuestos teóricos que conformaban la idea del Anillo Verde, tercero, reconocer, localizar y documentar las piezas que han ido materializando la ocupación urbana del Anillo Verde, clasificándolas según parámetros temporales, funcionales, urbanísticos y, formales, lo que permite analizar la geografía, uso, instrumentación y forma de su transformación a escala general metropolitana y, cuarto, profundizar a modo de comprobación a escala municipal y urbana en dos escenarios representativos del conjunto metropolitano: el municipio de Pozuelo de Alarcón y el distrito de Hortaleza-Barajas. El contenido del documento se divide en tres bloques, el bloque I, se centra en las bases teóricas, el bloque II sitúa el hilo argumental de la tesis a escala metropolitana y el bloque III comprueba el fenómeno a escala municipal y urbana. De esta forma, se comienza por la comprensión del significado del concepto del Anillo Verde, que va más allá de la dimensión instrumental asignada de límite y contención urbana frente al crecimiento de la ciudad industrial de principios del siglo XX, basada en la descentralización de la ciudad tradicional, para adquirir un significado más complejo, como gran espacio de reserva y salvaguarda de valores naturales y culturales que se expresaban en su territorio y que permitirían alcanzar el equilibrio entre la ciudad y sus habitantes, es decir, entre el hombre y el espacio que habita. Se hace un recorrido por las principales corrientes urbanísticas que se van nutriendo de distintas disciplinas (economía, sociología, geografía, biología, ecología) para plantear teorías que permitieran materializar un nuevo orden urbano según principios de equidad social, económica y ambiental, en una secuencia donde Europa y Estados Unidos realizaban un constante intercambio -el movimiento de la Ciudad Jardín o el Regionalismo, que dieron paso a propuestas como el Greater London o el Gran Berlín, donde la figura del Anillo Verde tenía un papel protagonista, y del que también participaría nuestro país y la ciudad de Madrid, con modelos regionales como el Plan Besteiro y urbanos como el Plan Bidagor, antecedentes directos del Plan General de Ordenación Urbana del Área Metropolitana de Madrid de 1963 que pone en marcha la ordenación del crecimiento metropolitano de Madrid. El hilo argumental de la tesis se organiza en una doble aproximación: un acercamiento a escala metropolitana a partir del reconocimiento del modelo de ciudad definido en los distintos planes generales que acompañaron el desarrollo metropolitano (municipio de Madrid y de los siete términos municipales que rodeaban a este y que tenían suelo destinado a Anillo Verde), haciendo referencia además a las relaciones con el planeamiento regional, concretando en una escala de aproximación municipal que avanza hasta la interpretación urbana detallada. El primer acercamiento tiene lugar en el bloque II y se organiza en tres capítulos. El capítulo 4 se dedica al punto obligado de partida de la geografía local, describiendo las características biofísicas de los terrenos que formaban parte del Anillo Verde, que han marcado históricamente la forma de aprovechamiento del territorio, desde las extensiones de bosques mediterráneos al norte y al oeste continuación del Monte del Pardo, a los distintos tipos de cultivo que se adaptaban al sustrato geológico y la forma del terreno (de las suaves ondulaciones de sedimentos arcósicos al norte a las extensas plataformas arenosas y yesíferas del sur), además de las zonas de huertos aprovechando las depresiones y los cursos de agua (arroyo del Monte Carmelo, arroyo de Valdebebas, arroyo del Quinto, arroyo del Santo, arroyo Butarque, arroyo Meaques y arroyo Pozuelo). Una vez reconocida la realidad física, el capítulo 5, avanza en la descripción de los distintos modelos de ciudad propuestos desde el planeamiento urbanístico, en sus distintas escalas, la regional y la municipal, como respuesta a la coyuntura social, económica y política que ha caracterizado el proceso de ocupación del Anillo Verde al compás de la construcción del AMM. Se han reunido las propuestas de planeamiento municipal de los distintos municipios que disponían de terreno calificado como Anillo Verde: Madrid, Coslada, Getafe, Leganés, Alcorcón, Boadilla del Monte y Pozuelo de Alarcón. Además se han incorporado las distintas propuestas de ordenación territorial que han servido de referencia al planeamiento municipal, en todas sus versiones, desde las sectoriales, de mayor éxito y apoyo institucional, a los distintos intentos de ordenación integral, de mayor complejidad pero de menor calado, precisamente por la dificultad de consenso entre la ordenación física y el desarrollo económico, entre los intereses privados y el beneficio público. El primer horizonte, comienza con la formulación del Plan General de Ordenación Urbana del Área Metropolitana de Madrid de 1963, su desarrollo y la puesta en marcha de los primeros planes municipales en la década de los años setenta, donde se comprueba la necesidad de un marco regional que “ordene” el territorio de forma integral y sirva de referencia a las actuaciones sectoriales que habían marcado el primer desarrollo metropolitano. El segundo, se sitúa dos décadas más tarde con la aprobación del Plan General de Ordenación Urbana de Madrid de 1985 y el conjunto de planes municipales de los términos limítrofes, que siguen su filosofía de austeridad en cuanto a crecimiento territorial. El tercero se inicia en 1997 con la siguiente generación de planes de corte neoliberal que imponen un modelo territorial basado en las grandes operaciones metropolitanas de centralidad, infraestructuras y equipamiento, que consumen de forma indiscriminada la totalidad del territorio madrileño. Será en el último capítulo del segundo bloque (capítulo 6) donde se represente gráficamente a escala metropolitana y se analicen las 229 piezas que han ido colmatando el espacio destinado a Anillo Verde, según los parámetros de estudio, en base a las cuales se plantean las primeras conclusiones generales de la tesis, poniendo de manifiesto que las alianzas entre los agentes soberanos en la construcción de la ciudad y su entorno han trasgredido sucesivamente las determinaciones del Planeamiento en su definición de modelo de ciudad y territorio, acusando la carencia de recursos instrumentales y jurídicos que alentaron el proceso de su desmantelamiento, y revelando la influencia de los condicionantes geográficos y naturales en la especialización funcional y segregación social en el conjunto del Área Metropolitana de Madrid. Se remata el discurso metropolitano con una batería de conclusiones que interpretan el fenómeno de ocupación del anillo de verdor metropolitano confirmando las hipótesis iniciales, reconociendo los valores medioambientales y culturales trasgredidos, sus diversos actores, las numerosas operaciones urbanísticas desarrolladas con distintos usos y envergadura, así como los instrumentos de planeamiento utilizados, en base a las cuales se materializa la construcción del AMM según un modelo extendido (spread), dibujando una mancha de aceite (o grase-spots según Geddes) que precisamente había querido evitarse desde el planeamiento urbanístico con la definición de un Anillo Verde, espacio inmune a la edificación, que se aleja de su papel estructurante (equilibrador entre la ciudad y sus habitantes) para convertirse en armadura de la estructura comunicativa, que una vez consolidada se convierte en la mejor aliada de la máquina inmobiliaria. El último paso, se desarrolla en el bloque III que se divide en los capítulo 7,8 y 9 y supone la comprobación de lo descrito en el conjunto de escala metropolitana, en dos aspectos fundamentales, la falta de consideración por los valores culturales y medioambientales que han modelado el territorio, imprimiéndole un carácter singular y específico y, la estructura del dominio del suelo, donde se reconoce de forma precisa el grupo social y los agentes encargados en cada momento de comercializar los suelos del anillo, que bajo el paraguas de la urgencia social y el engañoso beneficio popular, obtienen importantes beneficios económicos. Con esa intención, se da un salto hacia la escala municipal y urbana, seleccionando dos escenarios de estudio, el municipio de Pozuelo de Alarcón, que representa la materialización del crecimiento suburbano de la élite madrileña ocupando las zonas de mayor valor ecológico del anillo, y el distrito de Hortaleza-Barajas que ofrece su territorio a las grandes operaciones metropolitanas, apoyándose en el eje de actividad marcado por la conexión Madrid-Barcelona y el sistema aeroportuario de escala global, ambos situados al norte de la línea de borde entre la Sierra y la Mancha, ocupando por tanto los lugares más valiosos de la geografía madrileña (estructura funcional anticipada por Bidagor en 1946 en su modelo de ciudad adaptada al territorio madrileño) Una vez descrito este proceso trasgresor de límites, de normas, de conductas, y desde una perspectiva del fenómeno suficientemente documentada, en el capítulo 10, se realiza una reflexión sobre la incidencia real de la propuesta urbanística del Anillo Verde en la construcción del AMM, de la misma forma que se sugieren nuevos roles al planeamiento en un formato intencionado de largo recorrido en oposición a lo inmediato y circunstancial, que permita hacer una nueva lectura de los presupuestos teóricos que conformaban la idea del Anillo Verde, espacio articulador (medioambiental, social y cultural) del territorio madrileño. ABSTRACT The Metropolitan Greenbelt was defined by the 1963 Master Plan for the Madrid Metropolitan Area (MMA), following established international models of urban development, as the structural framework of the MMA, the principal open space within its network of open spaces and a public area of recreation and contact with nature for the residents of Madrid. In reality, however, it ha become a reserve of land in which various alliances between the institutional authorities and the dominant social class have been operating on the margin of the original plan, exposing a scarcity of legal and cultural resources for the safeguarding of common interests, and in which the geographical and natural characteristics of the territory itself have come to play an influential role in the functional specialization and spatial segregation of the MMA. With that idea as its HYPOTHESIS, the aim of this THESIS is to demonstrate its reality. The first step in this is to delineate, temporally and spatially, the object of study; i.e. the Metropolitan Greenbelt2. The second is to contextualize historically and disciplinarily those theoretical ideas which conform to the greenbelt concept. The third is to acknowledge, locate and document the elements which have characterized the urban occupation of the Greenbelt and classify these according to the parameters of time, function, urban development and form, which in turn would enable the geography, use, instrumentation and form of its transformation to be analysed on a general metropolitan scale. The fourth step, as a method of verification, is an in-depth analysis of two representative settings within the metropolitan network: the municipality of Pozuelo de Alarcón and the Hortaleza-Barajas district. The content of the document is divided into three parts. Part I focuses on the study’s theoretical foundations, Part II establishes a line of argument at the metropolitan level and Part III examines the phenomenon from a municipal and urban perspective. The thesis, then, begins with a study of the greenbelt concept itself and its meaning, which is far more complex than the accepted instrumental dimension of limiting and containing urbanization in response to the growth of the industrial city of the early 20th century, and which is based on a decentralization of the traditional city. This wider purpose is the setting aside of a large reserved space to safeguard the natural and cultural values of the region and thereby achieve a balance between the city and its residents; that is to say, between man and the space he inhabits. The principal currents of thought in urban planning will then be examined. These have drawn upon a variety of disciplines (economics, sociology, geography, biology, ecology) to develop theories for establishing a new urban order according to the principles of social, economic and environmental equity, and have involved a constant interchange between Europe and the United States. Thus, the City Garden and Regionalist movements would clear the way for proposals such as Greater London and Great Berlin, Chicago and Washington, in which the greenbelt would play a fundamental role. The participation of our own country and the city of Madrid is also discussed, through regional models such as the Besteiro Plan and urban ones like the Bidagor Plan, direct forerunners of 1963’s General Organizational Plan for the Madrid Metropolitan Area, which would set into motion the organization of Madrid’s metropolitan growth. The line of argument followed in this thesis is two-fold: first, an examination of metropolitan development in keeping with the city model as defined in the various General Plans for the development of both the municipality of Madrid and the seven surrounding municipalities which have land designated for its Greenbelt; and second, an examination of this growth in relation to Regional Planning measures, is detailed on a smaller scale (municipal and district), where the conditioning factors affecting the land property structure and the network of biophysical units may be analysed in depth. The first of these is dealt with in Part II and organized into three chapters (4, 5 and 6). Chapter 4 is dedicated to the obligatory starting point of the geographical setting itself. The biophysical characteristics of the territories set aside for the Greenbelt, and which historically have played a role in the area’s exploitation, are described here. These range from expanses of Mediterranean woodland to the north and west of Monte del Pardo to the various types of farmland that have been adapted to the geological substratum and the contours of the terrain (gentle undulations of arkosic sediment in the north, and wide sandy and gypsiferous tableland in the south), as well as orchards planted in low valleys and along watercourses (the creeks of Monte Carmelo, Valdebebas, Quinto, Santo, Butarque, Meaques and Pozuelo). Once this physical reality ha been detailed, in Chapter 5 will examine the various city models proposed by urban planners, both regionally and municipally, in response to the confluence of social, economic and political interests that have characterized the process of occupation in the Greenbelt area during the construction of the MMA. Municipal planning proposals will be collected and examined for the various municipalities which have land designated for the Greenbelt: Madrid, Coslada, Getafe, Leganés, Alcorcón, Boadilla del Monte and Pozuelo de Alarcón. Furthermore, the various territorial organization proposals which have served as references for municipal planning will also be addressed here, in all of their versions –from the sectorial, which have met with more success and institutional approval, to the many attempts at integration, which have been more complex but less influential, precisely for the difficulty of reconciling physical organization with economic development, and private interest with public benefit. The first period in this process was the development of the General Plan of 1963, followed by the first municipal development plans of the 1970s, in which the need for a regional framework that “organized” the territory in an integral fashion was defined. This would serve as a reference for the sectorial actions that marked the metropolitan area’s initial development. The second came two decades later with the approval of the General Plan of 1985, and the network of municipal plans for the surrounding communities, which followed the same philosophy of austerity with regard to territorial growth. The third would begin to take form in 1997, as a new generation of neo-liberal development plans imposed a territorial model based on centralized large-scale metropolitan operations of infrastructure and equipment, which would indiscriminately consume the totality of Madrid’s land. At the end of the Part II, in Chapter 6, the metropolitan area will be represented graphically and the 229 pieces that have been gradually encroaching upon land designated for the Greenbelt will be analysed. This analysis will be carried out according to the parameters defined for the study, and the first general conclusions of the thesis will be based on its findings. It will show how alliances between the various governing authorities in the construction of the city and its environment have successively violated established plans with regard to the definitions of city and territory, how shortages of instrumental and judicial resources have accentuated the dismantling process, and how natural and geographical factors have influenced functional specialization and social segregation in the Madrid Metropolitan Area. The final step, detailed in Part III, will address two fundamental aspects of what has just been described: the lack of consideration for the cultural and environmental values which have shaped this territory and imprinted upon it a specific and unique character; and the structure of land domination, with a precise identification of the social group and agents responsible at each stage of the Greenbelt’s commercialization, who, under an umbrella of social urgency and deceptive public benefit, have used it to obtain substantial financial rewards. For this purpose, a closer look is taken at two specific areas: the municipality of Pozuelo de Alarcón, representative of the suburban growth of an elite population which has occupied the Greenbelt areas of the greatest ecological value; and the Hortaleza-Barajas district, which has offered its territory to large metropolitan business interests, based on activities centred on the connection between Madrid and Barcelona and the system of international air travel. Both of these settings are located to the north of the line which divides the Sierra from La Mancha, and thus occupy the most valuable land in the Madrid region (a functional structure anticipated by Bidagor in 1946, with his city model adapted to the territory of Madrid). Finally, an attempt will be made to interpret the phenomenon of metropolitan Greenbelt occupation, confirming initial hypotheses, specifying the environmental and cultural values that have been violated, and identifying the various players involved, as well as numerous urbanization operations of varying sizes and interests, and the instruments of planning they have used. It will be seen from this that the construction of the MMA has in fact followed a “spread” model, a “grease spot” (as Geddes calls it) which, from the outset of the planning process and according to the definition of a greenbelt as a construction-free zone, was precisely to be avoided. This structural role (to provide a balance between a city and its residents) has thus been abandoned and the Greenbelt converted instead into a communicative framework which, once consolidated, has become the greatest ally of the real estate machine. After this process of violating limits, norms and established behaviour has been described and solidly documented, a reflection will be made on the real influence of the Greenbelt proposal in the construction of the MMA. At the same time, new roles will be suggested for future planning, roles which are deliberate and long term, in opposition to the immediate and circumstantial. This will enable a new interpretation of the theoretical principles behind the greenbelt concept, a space designed to connect the territory of Madrid environmentally, socially and culturally.

Winthrop, John, 1606-1676, autographed letter signed (copy) to Richard Odell; Pequot, Conn., 1 side (4 pages), 1652 November 27

Copy of correspondence responding to a November 16, 1652, letter from Odell regarding his daughter's illness, which Winthrop speculates is hemiplegia. According to Winthrop, "The cure depends upon the knowledge of the right cause, and not only that but the constand and due aplication of such things as may conduce them thereto, which is difficult to doe at a distance." Winthrop further writes that he did not at present have medicine to send for her condition, but recommends "some general things that might be helpfull." These included keeping the child warm with fox or rabbit furs, an ointment consisting of herbs, wax, castor oil, worm grease, fox grease, or an ointment of balsam. Winthrop writes he has sent an ointment, but does not specify its ingredients. His other suggestions for treatment include cupping without scarification, and an decoction containing sarsaparilla, guaiacum, and spirit of rosemary.

Real-time temperature estimation for power MOSFETs considering thermal ageing effects

This paper presents a novel real-time power-device temperature estimation method that monitors the power MOSFET's junction temperature shift arising from thermal aging effects and incorporates the updated electrothermal models of power modules into digital controllers. Currently, the real-time estimator is emerging as an important tool for active control of device junction temperature as well as online health monitoring for power electronic systems, but its thermal model fails to address the device's ongoing degradation. Because of a mismatch of coefficients of thermal expansion between layers of power devices, repetitive thermal cycling will cause cracks, voids, and even delamination within the device components, particularly in the solder and thermal grease layers. Consequently, the thermal resistance of power devices will increase, making it possible to use thermal resistance (and junction temperature) as key indicators for condition monitoring and control purposes. In this paper, the predicted device temperature via threshold voltage measurements is compared with the real-time estimated ones, and the difference is attributed to the aging of the device. The thermal models in digital controllers are frequently updated to correct the shift caused by thermal aging effects. Experimental results on three power MOSFETs confirm that the proposed methodologies are effective to incorporate the thermal aging effects in the power-device temperature estimator with good accuracy. The developed adaptive technologies can be applied to other power devices such as IGBTs and SiC MOSFETs, and have significant economic implications.

Desenvolvimento de bionanocompósitos: nano e microcristais de celulose com poli (álcool vinílico) e poli (ácido lático)

This work has the main objective to obtain nano and microcrystals of cellulose, extracted from the pineapple leaf fibres (PALF), as reinforcement for the manufacture of biocomposite films with polymeric matrices of Poly(vinyl alcohol) (PVA) and Poly(lactic acid) (PLA). The polymer matrices and the nano and microcrystals of cellulose were characterised by means of TGA, FTIR and DSC. The analysis was performed on the pineapple leaves to identify the macro and micronutrients. The fibers of the leaves of the pineapple were extracted in a desfibradeira mechanical. The PALF extracted were washed to remove washable impurities and subsequently treated with sodium hydroxide (NaOH) and sodium hypochlorite (NaClO) in the removal of impurities, such as fat, grease, pectates, pectin and lignin. The processed PALF fibers were hydrolysed in sulfuric acid (H2SO4) at a concentration of 13.5 %, to obtain nano and microcrystals of cellulose. In the manufacture of biocomposite films, concentrations of cellulose, 0 %, 1 %, 3 %, 6 %, 9% and 12% were used as reinforcement to the matrices of PVA and PLA. The PVA was dissolved in distilled water at 80 ± 5 oC and the PLA was dissolved in dichloromethane at room temperature. The manufacture of biocompósitos in the form of films was carried out by "casting". Tests were carried out to study the water absorption by the films and mechanical test of resistance to traction according to ASTM D638-10 with a velocity of 50 mm/min.. Chi-square statistical test was used to check for the existence of significant differences in the level of 0.05: the lengths of the PALF, lengths of the nano and microcrystals of cellulose and the procedures used for the filtration using filter syringe of 0.2 μm or filtration and centrifugation. The hydrophilicity of biocompósitos was analysed by measuring the contact angle and the thickness of biocompósitos were compared as well as the results of tests of traction. Statistical T test - Student was also applied with the significance level (0.05). In biodegradation, Sturm test of standard D5209 was used. Nano and microcrystals of cellulose with lengths ranging from 7.33 nm to 186.17 nm were found. The PVA films showed average thicknesses of 0.153 μm and PLA 0.210 μm. There is a strong linear correlation directly proportional between the traction of the films of PVA and the concentration of cellulose in the films (composite) (0,7336), while the thickness of the film was correlated in 0.1404. Nano and microcrystals of cellulose and thickness together, correlated to 0.8740. While the correlation between the cellulose content and tensile strength was weak and inversely proportional (- 0,0057) and thickness in -0.2602, totaling -0,2659 in PLA films. This can be attributed to the nano and microcrystals of cellulose not fully adsorbed to the PLA matrix. In the comparison of the results of the traction of the two polymer matrices, the nano and microcrystals have helped in reducing the traction of the films (composite) of PLA. There was still the degradation of the film of PVA, within a period of 20 days, which was not seen in the PLA film, on the other hand, the observations made in the literature, the average time to start the degradation is above 60 days. What can be said that the films are biodegradable composites, with hydrophilicity and the nano and microcrystals of cellulose, contribute positively in the improvement of the results of polymer matrices used.

Avaliação de floculante natural à base de Moringa oleifera no tratamento de água produzida na indústria do petróleo: aplicação da técnica combinada floculação/flotação

The principal effluent in the oil industry is the produced water, which is commonly associated to the produced oil. It presents a pronounced volume of production and it can be reflected on the environment and society, if its discharge is unappropriated. Therefore, it is indispensable a valuable careful to establish and maintain its management. The traditional treatment of produced water, usualy includes both tecniques, flocculation and flotation. At flocculation processes, there are traditional floculant agents that aren’t well specified by tecnichal information tables and still expensive. As for the flotation process, it’s the step in which is possible to separate the suspended particles in the effluent. The dissolved air flotation (DAF) is a technique that has been consolidating economically and environmentally, presenting great reliability when compared with other processes. The DAF is presented as a process widely used in various fields of water and wastewater treatment around the globe. In this regard, this study was aimed to evaluate the potential of an alternative natural flocculant agent based on Moringa oleifera to reduce the amount of oil and grease (TOG) in produced water from the oil industry by the method of flocculation/DAF. the natural flocculant agent was evaluated by its efficacy, as well as its efficiency when compared with two commercial flocculant agents normally used by the petroleum industry. The experiments were conducted following an experimental design and the overall efficiencies for all flocculants were treated through statistical calculation based on the use of STATISTICA software version 10.0. Therefore, contour surfaces were obtained from the experimental design and were interpreted in terms of the response variable removal efficiency TOG (total oil and greases). The plan still allowed to obtain mathematical models for calculating the response variable in the studied conditions. Commercial flocculants showed similar behavior, with an average overall efficiency of 90% for oil removal, however it is the economical analysis the decisive factor to choose one of these flocculant agents to the process. The natural alternative flocculant agent based on Moringa oleifera showed lower separation efficiency than those of commercials one (average 70%), on the other hand this flocculant causes less environmental impacts and it´s less expensive

Aplicação de géis de goma guar no processo de clarificação de salmouras e águas produzidas

Produced water is considered the main effluent of the oil industry, due to their increased volume in mature fields and its varied composition. The oil and grease content (TOG) is the main parameter for the final disposal of produced water. In this context, it is of great significance to develop an alternative method based on guar gum gel for the treatment of synthetic produced water, and using as the differential a polymer having high hydrophilicity for clarifying waters contaminated with oil. Thus, this study aims to evaluate the efficiency of guar gum gels in the remotion of oil from produced water. Guar gum is a natural polymer that, under specific conditions, forms three-dimensional structures, with important physical and chemical properties. By crosslinking the polymer chains by borate ions in the presence of salts, the effect salting out occurs, reducing the solubility of the polymer gel in water. As a result, there is phase separation with the oil trapped in the collapsed gel. The TOG was quantified from the spectroscopy in the ultraviolet and visible region. The system was proven to be highly efficient in the removal of dispersed oil from water produced synthetically, reaching removal percentages above 90%.

A study of methods used to analyze total oil and polycyclic aromatic hydrocarbons in produced water: steps towards the validation of molecularly imprinted polymers for use in marine environmetns

Produced water is a by-product of offshore oil and gas production, and is released in large volumes when platforms are actively processing crude oil. Some pollutants are not typically removed by conventional oil/water separation methods and are discharged with produced water. Oil and grease can be found dispersed in produced water in the form of tiny droplets, and polycyclic aromatic hydrocarbons (PAHs) are commonly found dissolved in produced water. Both can have acute and chronic toxic effects in marine environments even at low exposure levels. The analysis of the dissolved and dispersed phases are a priority, but effort is required to meet the necessary detection limits. There are several methods for the analysis of produced water for dispersed oil and dissolved PAHs, all of which have advantages and disadvantages. In this work, EPA Method 1664 and APHA Method 5520 C for the determination of oil and grease will be examined and compared. For the detection of PAHs, EPA Method 525 and PAH MIPs will be compared, and results evaluated. APHA Method 5520 C Partition-Infrared Method is a liquid-liquid extraction procedure with IR determination of oil and grease. For analysis on spiked samples of artificial seawater, extraction efficiency ranged from 85 – 97%. Linearity was achieved in the range of 5 – 500 mg/L. This is a single-wavelength method and is unsuitable for quantification of aromatics and other compounds that lack sp³-hybridized carbon atoms. EPA Method 1664 is the liquid-liquid extraction of oil and grease from water samples followed by gravimetric determination. When distilled water spiked with reference oil was extracted by this procedure, extraction efficiency ranged from 28.4 – 86.2%, and %RSD ranged from 7.68 – 38.0%. EPA Method 525 uses solid phase extraction with analysis by GC-MS, and was performed on distilled water and water from St. John’s Harbour, all spiked with naphthalene, fluorene, phenanthrene, and pyrene. The limits of detection in harbour water were 0.144, 3.82, 0.119, and 0.153 g/L respectively. Linearity was obtained in the range of 0.5-10 g/L, and %RSD ranged from 0.36% (fluorene) to 46% (pyrene). Molecularly imprinted polymers (MIPs) are sorbent materials made selective by polymerizing functional monomers and crosslinkers in the presence of a template molecule, usually the analytes of interest or related compounds. They can adsorb and concentrate PAHs from aqueous environments and are combined with methods of analysis including GC-MS, LC-UV-Vis, and desorption electrospray ionization (DESI)- MS. This work examines MIP-based methods as well as those methods previously mentioned which are currently used by the oil and gas industry and government environmental agencies. MIPs are shown to give results consistent with other methods, and are a low-cost alternative improving ease, throughput, and sensitivity. PAH MIPs were used to determine naphthalene spiked into ASTM artificial seawater, as well as produced water from an offshore oil and gas operation. Linearity was achieved in the range studied (0.5 – 5 mg/L) for both matrices, with R² = 0.936 for seawater and R² = 0.819 for produced water. The %RSD for seawater ranged from 6.58 – 50.5% and for produced water, from 8.19 – 79.6%.

A Corrupção burocrática inibe o empreendedorismo? uma análise empírica dos estados brasileiros

This work aims to investigate the relationship between the entrepreneurship and the incidence of bureaucratic corruption in the states of Brazil and Federal District. The main hypothesis of this study is that the opening of a business in Brazilian states is negatively affected by the incidence of corruption. The theoretical reference is divided into Entrepreneurship and bureaucratic corruption, with an emphasis on materialistic perspective (objectivist) of entrepreneurship and the effects of bureaucratic corruption on entrepreneurial activity. By the regression method with panel data, we estimated the models with pooled data and fixed and random effects. To measure corruption, I used the General Index of Corruption for the Brazilian states (BOLL, 2010), and to represent entrepreneurship, firm entry per capita by state. Tests (Chow, Hausman and Breusch-Pagan) indicate that the random effects model is more appropriate, and the preliminary results indicate a positive impact of bureaucratic corruption on entrepreneurial activity, contradicting the hypothesis expected and found in previous articles to Brazil, and corroborating the proposition of Dreher and Gassebner (2011) that, in countries with high regulation, bureaucratic corruption can be grease in the wheels of entrepreneurship

A Corrupção burocrática inibe o empreendedorismo? uma análise empírica dos estados brasileiros

This work aims to investigate the relationship between the entrepreneurship and the incidence of bureaucratic corruption in the states of Brazil and Federal District. The main hypothesis of this study is that the opening of a business in Brazilian states is negatively affected by the incidence of corruption. The theoretical reference is divided into Entrepreneurship and bureaucratic corruption, with an emphasis on materialistic perspective (objectivist) of entrepreneurship and the effects of bureaucratic corruption on entrepreneurial activity. By the regression method with panel data, we estimated the models with pooled data and fixed and random effects. To measure corruption, I used the General Index of Corruption for the Brazilian states (BOLL, 2010), and to represent entrepreneurship, firm entry per capita by state. Tests (Chow, Hausman and Breusch-Pagan) indicate that the random effects model is more appropriate, and the preliminary results indicate a positive impact of bureaucratic corruption on entrepreneurial activity, contradicting the hypothesis expected and found in previous articles to Brazil, and corroborating the proposition of Dreher and Gassebner (2011) that, in countries with high regulation, bureaucratic corruption can be grease in the wheels of entrepreneurship

Abdominal hyperalgesia in secretory phospholipase A(2)-induced rat pancreatitis: Distinct roles of NK1 receptors

We investigated the potential of secretory phospholipase A(2) (sPLA(2))-induced pancreatitis to promote abdominal hyperalgesia, as well as to depolarize sensory fibres in vitro using a grease-gap technique. Pancreatitis was induced by the injection of sPLA(2) from Crotalus durissus terrificus (sPLA(2) Cdt, 300 mu g kg(-1)) venom into the common bile duct of rats. Pancreatic inflammatory signs, serum amylase levels and abdominal hyperalgesia were evaluated in rats treated or not with SR140333, a tachykinin NK1 receptor antagonist. Injection of sPLA(2) Cdt caused pancreatic oedema formation and increased pancreatic neutrophil infiltration and serum amylase at 4 h, which returned to normality by 24 h, except for the neutrophil infiltration, which was still increased at this time point. Animals injected with sPLA(2) exhibited a lower withdrawal threshold to electronic von Frey stimulation in the upper abdominal region at 4 h, but not 24 h, post-injection when compared with saline-injected rats. Pre-treatment of animals with SR140333 significantly reduced the sPLA(2) Cdt-induced abdominal hyperalgesia, without affecting the other parameters. Neither sPLA(2) Cdt nor sPLA(2) from Naja mocambique mocambique venom depolarized capsaicin-sensitive sensory fibres from rat vagus nerve, but they decreased the propagated compound action potentials in both A and C fibres. These data show for the first time that NK1 receptors play an important role in the early abdominal hyperalgesia in a rat model of sPLA(2)-induced pancreatitis, suggesting that these receptors are of importance in the development of pain in the pancreatitis condition. We also provide evidence that sPLA(2)s do not directly depolarize sensory fibres in vitro. (C) 2011 European Federation of International Association for the Study of Pain Chapters. Published by Elsevier Ltd. All rights reserved.

Desenvolvimento de membranas porosas de alumina para fins de tratamento de efluente industrial têxtil

Textile production has been considered as an activity of high environmental impact due to the generation of large volumes of waste water with high load of organic compounds and strongly colored effluents, toxic and difficult biodegradability. This thesis deals with obtaining porous alumina ceramic membranes for filtration of textile effluent in the removal of contaminants, mainly color and turbidity. Two types of alumina with different particle sizes as a basis for the preparation of formulation for mass production of ceramic samples and membranes. The technological properties of the samples were evaluated after using sintering conditions: 1,350ºC-2H, 1,450ºC-30M, 1,450ºC-2H, 1,475ºC-30M and 1,475ºC-2H. The sintered samples were characterized by XRD, XRF, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, SEM and Intrusion Porosimetry by Mercury. After the characterization, a standard membrane was selected with their respective sintering condition for the filterability tests. The effluent was provided by a local Textile Industry and characterized at the entry and exit of the treatment plant. A statistical analysis was used to study the effluent using the following parameters: pH, temperature, EC, SS, SD, oil and grease, turbidity, COD, DO, total phosphorus, chlorides, phenols, metals and fecal coliform. The filtered effluent was evaluated by using the same parameters. These results demonstrate that the feasibility of the use of porous alumina ceramic membranes for removing contaminants from textile effluent with improved average pore size of 0.4 micrometre (distribution range varying from 0,025 to 2.0 micrometre), with total porosity of 29.66%, and average percentages of color removal efficiency of 89.02%, 92.49% of SS, turbidity of 94.55%, metals 2.70% (manganese) to 71.52% (iron) according to each metal and COD removal of 72.80%

Testes físico-mecânicos e físico-químicos do couro da tilápia vermelha

Realizaram-se testes físico-mecânicos e físico-químicos em couro de tilápia vermelha (Oreochromis spp.) a fim de testar a sua resistência. As amostras foram distribuídas em delineamento inteiramente ao acaso com dois tratamentos: no T1, procedeu-se à retirada do corpo-de-prova no sentido longitudinal e, no T2, à retirada do corpo-de-prova no sentido transversal. Para os testes de determinação da resistência à tração, alongamento e rasgamento progressivo, foi utilizado o dinamômetro EMIC, com velocidade de afastamento entre as cargas de 100 ± 20mm/min, em ambiente climatizado (± 23ºC e UR do ar de 50%), por 24 horas. A espessura do couro variou de 0,61 a 0,75mm, mas não houve diferença entre os sentidos analisados. O couro apresentou maior resistência à tração no sentido transversal, 25,89N/mm², (P<0,01), comparado ao sentido longitudinal, 14,20 N/mm². O alongamento foi significativamente (P<0,05) maior no sentido longitudinal, 80,8%, em relação ao transversal, 62,6%. Não houve diferença para o rasgamento progressivo entre os tratamentos. O couro apresentou teor de óxido de cromo de 3,8%, graxa de 15,1% e pH e cifra diferencial de 3,5 e 0,5, respectivamente. Os valores nos testes de resistência e físico-químicos apresentados pelo couro indicam que ele pode ser utilizado para a confecção de vestuário e artefatos de couro em geral.

Projeto, construção e análise de um prototipo vibracional em escala de bancada aplicável ao tratamento de água de produção de petróleo bruto, mediante inovadora operação híbrida de adsorção e auto-flotação

A self-flotator vibrational prototype electromechanical drive for treatment of oil and water emulsion or like emulsion is presented and evaluated. Oil production and refining to obtain derivatives is carried out under arrangements technically referred to as on-shore and off-shore, ie, on the continent and in the sea. In Brazil 80 % of the petroleum production is taken at sea and area of deployment and it cost scale are worrisome. It is associated, oily water production on a large scale, carrier 95% of the potential pollutant of activity whose final destination is the environment medium, terrestrial or maritime. Although diversified set of techniques and water treatment systems are in use or research, we propose an innovative system that operates in a sustainable way without chemical additives, for the good of the ecosystem. Labyrinth adsor-bent is used in metal spirals, and laboratory scale flow. Equipment and process patents are claimed. Treatments were performed at different flow rates and bands often monitored with control systems, some built, other bought for this purpose. Measurements of the levels of oil and grease (OGC) of efluents treaty remained within the range of legal framework under test conditions. Adsorbents were weighed before and after treatment for obtaining oil impregna-tion, the performance goal of vibratory action and treatment as a whole. Treatment technolo-gies in course are referenced, to compare performance, qualitatively and quantitatively. The vibration energy consumption is faced with and without conventional flotation and self-flotation. There are good prospects for the proposed, especially in reducing the residence time, by capillary action system. The impregnation dimensionless parameter was created and confronted with consecrated dimensionless parameters, on the vibrational version, such as Weber number and Froude number in quadratic form, referred to as vibrational criticality. Re-sults suggest limits to the vibration intensity

A study on energy and environmental management techniques used in petroleum process industries

Petroleum process industries are one of the most energy and emission intensive sectors throughout the world.There are natural gas processing plant, crude oils and condensate fractionation plant, liquefied natural gas plantand liquefied petroleum gas plant etc. creates environmental pollution by processing and handling of petroleumproducts. The study critically reviewed and discussed the energy and environmental management includingpollution control of petroleum process industries of Bangladesh. They produce both gaseous (process gas, wastegas etc.) and liquid (produced water, waste oil and grease etc.) pollutants. The study found that the liquid pollutantlike waste water is more hazardous and its treatment process is highly complicated due to its higher salinity, morecorrosivity and grease contain characteristics. As part of energy management, the rational use of energy and energyflow diagram of the petroleum industry is presented. Finally, a time frame measures which can be implemented inorder to save energy is outlined. The study concluded that the rational use of energy and proper environmentalmanagement are essential for achieving energy and environmental sustainability of process industries.